Folding machine

Fasti 213 - 2040 x 10mm

Condition: new, Year of construction: 2026, The CORMAK HBS275 band saw for cutting tubes, profiles and bars is widely used in all locksmith and metalworking workshops where precision, quality and cutting speed matter. The model is equipped with a 0-60° swivel arm; the saw guides are based on sintered carbide. The frame construction ensures accurate and quiet operation. Machine characteristics The horizontal metal band saw with swivel arm enables cutting in a plane perpendicular to the axis of the material being cut and at any angle within the range from 0 to 60°. The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The blade guides are equipped with special carbide plates and bearings. This has a major impact on blade guidance, service life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and blade. The machine is equipped with an efficient coolant pump with a closed coolant circuit. The saw arm is made of a single cast-iron casting and, together with the 27 mm wide cutting blade used in this saw, fully enables multi-series cutting of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The blade guides are equipped with hard metal plates – sintered carbide and a rolling bearing system. It is precisely the SINTERED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The arm has been inclined at an angle of 25°, which increases blade durability and improves cutting conditions. A cleaning brush is mounted at the bottom of the arm to achieve excellent cleanliness and blade operation. The machine drive is transmitted via a worm gearbox. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The shape of the upper part of the base forms a tray for draining coolant and collecting chips generated during material cutting. A cast-iron work table with a swivel arm and a control panel on a separate arm is mounted to the base. In the cutting process, the main cutting movement is the movement of the cutting blade, while the feed is the lowering of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic cylinder. The feed speed is adjusted on the saw control panel. Two cutting blade speeds are available: 37.5 and 75m/min. In the lower position of the arm (after cutting the material), the cutting blade drive is switched off automatically. Safety is ensured by cutting blade guards and micro-switches that stop the motor after the cutting cycle is completed or when any guard is opened; additional protection consists of automatic shutdown of the saw in the event of cutting blade breakage. The machine drive is transmitted by a motor with a worm gearbox. The motor with thermal fuse protects against overheating during operation. Technical data TOTAL POWER 1.5kW POWER SUPPLY 400V 50Hz ARM LOWERING ADJUSTMENT hydraulic cylinder BLADE LENGTH Tjdpfx Aloudi Une Ajc 2450 x 27 x 0.9 mm BLADE SPEED 37.5 / 75m/min VICE BASE HEIGHT 900 mm MACHINE DIMENSIONS (WITH ARM RAISED) (L x W x H) 1720 x 800 x 1800 mm WEIGHT 215 kg

Condition: excellent (used), 3-phase DC spot welding machine DALEX, Type PMS 11-4 G 3 Rated power at 50% duty cycle: 96 kVA Secondary short-circuit current: 44.5 kA Secondary open-circuit voltage: 4.72 V Electrode force: 100-600 daN Arm reach: 550 mm with mounting control cabinet according to VDE 0100 Main switch Synchronous welding control 8033 Todpjhmvawefx Al Ajc Weight: 740 kg

Condition: good (used), Rolling width: 2050mm Rolling thickness 3x toproll Ø:18mm Rolling thickness 5x toproll Ø:21mm Rolling thickness prebending: 12mm Top Roll Ø: 280mm Side roll Ø: 260mm Number of rolls: 3 Tjdpfjwtpgtex Al Aoc Rolling speed: 0-5 Adjustiment lower roll: 0-150mm/min. Adjustment side rolls: 0-150mm/min. Top support: yes Power: 12kW Length: 3000mm Width: 1500mm Height: 1600mm Weight: 5200kg

Condition: used, Year of construction: 1997, Year: 1997 Table: 1780 x 415mm Tsdowtd Dyjpfx Al Aoc Spindle Speed 30 – 2066 RPM FIDIA Control Power Draw Bar LOVO Light Coolant

Condition: used, Year of construction: 2000, sheet width 3020 mm plate thickness 5 mm distance between columns 3020 mm Control Simatec OP7 stroke 450 mm back stop - adjustable 2000 mm Tsdpoyk Dicsfx Al Aec work height max. 900 mm total power requirement 22 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 4200 x 1600/2900 x 2000 mm Features: - Motorized rear stop, 1000 mm - Hydraulic upper beam adjustment - Motorized lower beam adjustment - Hydraulic tool clamping - Side guard - Foot switch - Operator's manual

Condition: excellent (used), Year of construction: 1979, turning diameter over bed 480 mm turning diameter over slide rest 295 mm turning length 1000 mm spindle bore 56 mm weight of the machine ca. 1,8 t dimensions of the machine ca. 1,4 x 0,8 x 1,6 m Tjdpfxjyiu T Aj Al Aoc

Condition: used, Technical details: x-travel: 500 mm y-travel: 380 mm z-travel: 330 mm control: Siemens 840 D / 810 D spindle cone ISO: vertikal/horizontal: 40 Tsdpou Nc R Nefx Al Asc table surface area: 400x800 fest mm spindle turning speed - continuous: verikal/horizontal: 35-1800 U/min spindle head swivable left - right: 90 ° rapid traverse X,Y: 3,15 mm/min. rapid traverse Z-axis: 1,6 m/min feed continuous: X/Y/Z: 6,3 - 1250 Total power requirement: 7,4 kW Weight approx.: 1,8 t dimension machine xH: 1,8 x 2,2 x 1,8 m dimensions electric cabinet LxWxH: 0,5 x 0,85 x 2,1 m Machine was rebuilt in 2002, modernized with a modern control Siemens 840D/810D shopmill. - adjustment travel via counter holder slide: 440mm Equipment: - cooling system - control panel with jib arm Accessories: - various collet sleeves - div. SK 40 tapers - various milling arbors i.D. *

Condition: used, A used well preserved guillotine shear Vöest Alpine cutting length: 2010 mm cutting capacity in steel up to 370N/mm² tensile strength: 5 mm strokes per minute: 50 H/min Todpepgmpdsfx Al Asc Hold down pressure: 30 bar number of hold-downs: 8 pcs. backgauge manually adjustable: 950 mm throat depth: 150mm dimensions: LxWxH 280x190x140cm weight: 2500 kg

Condition: good (used), Ring bending machine, profile bending machine, bending machine, pipe bending tool, pipe bender, pipe bending machine, mandrel bending machine Todpsh S Ti Esfx Al Ajc -Mandrel bending machine: mechanical profile bending machine -Accessories: see photos -Tool: Currently available tools are designed for box profiles -Overall dimensions: 1200/740/H1220 mm -Weight: 169 kg

Condition: good (used), Year of construction: 2012, fuel type: diesel, General information Field of application: Construction Weights Empty weight: 2.172 kg Functional Generator capacity: 60 kVA CE mark: yes Condition Technical condition: good Visual appearance: good Other information Fuel consumption: Diesel Delivery terms: EXW Water tank volume: 390 l Additional information Please contact Christian Theißen for more information Manufacturer: SDMO Model: R66C2 Year of build: 2012 Condition: Used Data: Performance: 60 kVA Engine: John Deere Length: 234 cm Tjdpfx Asx H Nliol Asc Width: 108 cm Height: 190 cm Tank capacity: 39 l / Diesel Required connection: 2x 230 V/16 A, 1x 380 V/16 A, 1x 380 V, 63 Ao. Klemmleiste. Drive type: Diesel Operating noise: 88 dB Own weight: 2.172 kg Weight: betankt 2.500 kg Own weight: 2.172 kg Special features: Lifting eye, consumption of approximately 14.75 liters per hour. On Weijer trailer. Location: 41468 Neuss immediately available