Used Art-Wos Oscillator for sale (4,108)

Condition: new, ACETI adjustable belt sander art. 17 Volt 400 - Three-phase Electric absorption : Kw 1.1 Rpm 2800 Belt width mm 120 Belt development mm 1500 Weight kg 75 Pgsdpfokt Uu Esx Adlok

Condition: used, Year of construction: 1976, Esterer LSH Sash Saw 1976 - Automatic cantilever adjustment Podpfsyhduyex Adlogk - Hydraulic roller lifting - Swing frame - With templates - With magnetic holder - With Jansen saw tensioner - With Esterer Arta-C riving knife - With drive motor - With saw blades - With intermediate gear Clearance width: 650 mm Clearance height: 90–620 mm Stroke: 500 mm Feed speed: 0–8 m/min Feed power: 3.5 kW Pulleys: 900 mm Total weight: 5.4 t Fits the foundation of the Esterer LD65 sash saw. Has been stationary for around 15 years. Dismantled and stored approx. 3 years ago. Annual cut approximately 3,000 solid cubic meters. Very good condition – immediately available – fully functional Location: Austria, near Graz

Condition: used, Year of construction: 1977, Wurster and Dietz GDZ 600 GES Year of construction 1977 Passage: 71 cm stroke: 600 mm with swing frame with water-cooled guides with hydraulic saw clamp Jansen with riving knife with saw blades with templates Pgjdpsqpdi Uofx Adlek with fence immediately available Location: Austria, near Klagenfurt

Condition: used, Frame Saw Esterer LSH Year of Manufacture: 1968 Clearance: 65 cm 500 mm stroke Oscillating frame Automatic overhang adjustment Hydraulic roller lifting With splitter wedge With drive motor Pgjdpfxsw Dn S Aj Adlsk With gear transmission With saw blades With hydraulic saw tensioner With suspension system With templates With log carriage Weiss HdT-L, Year 1996 (can also be sold separately) The machine has been out of operation for quite some time and should be thoroughly checked and overhauled. Location: Austria, near 8700 Leoben

Condition: used, Year of construction: 1998, SECOND-HAND OSCILLATING TWO BENCHES MORTISER MOD. BALESTRINI MICRON - CE RULES Pgedpfjmxkwdox Adlek - Volt. 380/50 - S/N AF657 Y11 - Year 1998

Condition: used, Year of construction: 1999, machine/vehicle number: 228, SECOND-HAND OSCILLATING HF MULTIPLE MORTISER BACCI MX90 - 5+5 horizontal spindles - 2+2 vertical spindles - RPM Spindles (selectable motor by motor) RPM 6000/12000 - Max inclinations of slots > 20° - Inclinations from and towards the outside -7° + 30° - Max C/C distance of spindles mm. 1280 - SN 228 - CE rules (year 1999) Podpewrd A Tsfx Adlegk

Condition: used, Sicma brand double horizontal drilling and oscillating machine with 3 drilling spindles and 1 oscillating spindle, used. Pedop Acdpepfx Adlsgk

Condition: used, Bacci 1-Point Oscillating Mortiser Pgodpfxewdfh Uo Adlek

Condition: used, Oscillator tubes (triodes) for HF Welders : - BW 1608J2F-R, made E.E.V. : NEW - BW 1185J2, made E.E.V : Pgedpfxevtp Huo Adlsk

Condition: new, Year of construction: 2026, The CNC 2030 SPECIAL milling plotter is a high-precision machine built in Poland, used for machining many engineering materials, i.e.: wood, wood-based (chipboard, MDF, OSB, etc.), plastics (Plexiglas, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. CONSTRUCTION: The plotter is made entirely of high quality steel. During the manufacturing process, all components undergo a special heat treatment. WORKING SURFACE: The working area of our machine tool is 2100 x 3100 [mm]. It is possible to manufacture the machine with a different working area. Z-AXIS RANGE AND GANTRY CLEARANCE: The Z-axis range is 200 mm as standard. However, it is possible to increase it to 400 mm. DRIVES: High-resolution, high-power digital motors have been used to drive our machine tools, ensuring adequate acceleration and speed in each direction. The X and Y axes use classic and well-proven helical slats, which ensure long service life and precision, and a high-performance ball screw is used to drive the Z axis. SPRING: A powerful, liquid-cooled and durable high-end brushless spindle is used to drive the cutting tool. The spindle bearings are high-quality machine bearings, which are very quiet and guarantee above-average durability. The spindle speed ranges from 6 to 24,000 rpm. Pgodpeirmgfjfx Adlok SOFTWARE: The machine has been provided with suitable, easy-to-use CAD/CAM software in the latest version. CONTROL: This is done by means of a controller, which has its own processor and operating memory to ensure stable and reliable operation. The controller has a function to return to further operation after power loss so there is no need to initialise the program from scratch. VACUUM TABLE: The table is made with raster technology, thanks to the sections used we can separate any part of the table with a seal. This allows us to adapt the working area to the specific workpiece. A well-chosen vacuum pump according to the size of the table will guarantee uniform suction of the material to the table. 6-POSITION LINEAR TOOL MAGAZINE: The linear magazine enables an automatic machining process. It is used for multi-tool machining. In addition, it allows for faster and more efficient work and contributes to the elimination of operator errors. The standard magazine on our machines is for 6 positions. It can be extended to 16 positions. Oscillating knife The oscillating knife is a state-of-the-art head fitted to CNC machines, designed for cutting low-density materials. The blade moves up and down and thus 'slices' the material. This makes it possible to cut thick, soft materials - FOAM foam, magnetic foils, corrugated cardboard, textiles.

Condition: excellent (used), This line was bought to produce protein bars for a sports nutrition business (under 900 hours). The machinery is in immaculate condition having only been used occasionally for their own production. PLEASE NOTE THAT THE VEMAG HP25E HAS BEEN REPLACED BY A NEWER HP20E FROM A DIFFERENT FACTORY. Psdpfxeunm S He Adljgk

Condition: used, This listing is for the Sartorius YDP30 Thermo Direct Printer The unit is in full working condition and is ready for immediate use Overview & Compatibility Designed to work seamlessly with Sartorius laboratory balances (Practum®, Quintix®, Secura®, MA37, MA160) — it auto-detects the printer and guides users through GLP-compliant print protocols for traceability and accuracy Supports both direct thermal printing (where the paper darkens directly) and thermal transfer printing (which uses a ribbon for more durable, fade-resistant printouts) Pgodpexhfy Nefx Adlek Certified Scale Print Capabilities Resolution: 203 dpi for clear text and barcodes Scales Galore Max print width: 54 mm (2.13") — fits both standard A4-style lab reports and narrow self-adhesive labels Label options: On-demand printing of standard paper, continuous rolls, or adhesive labels using compatible ribbons

Condition: used, total height: 1,950 mm, total length: 900 mm, total width: 800 mm, Weight: 150 kg - Documentation available: No - CE certificate present: No - Serial number: 69770 - Saw direction: vertical - Wheel diameter [mm]: 350 - Max. saw width to column [mm]: 350 - Max. cutting height [mm]: 300 - Table length [mm]: 450 - Table width [mm]: 450 - Band saw thickness [mm]: 1 - Voltage [V]: 400 - Fuse [A]: 16 - Transport dimensions: 900mm x 800mm x 1950mm (l x w x h) - Transport weight [kg]: 150kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Pjdpfx Aoy Hufnsdlegk VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: reconditioned (used), Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Pgjdpfx Adoyizxrelok Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 174146, fuel type: gas, color: blue, power: 10,000 kW (13,596.20 HP), nominal power: 10,000 kW (13,596.20 HP), nominal power (apparent): 12,163 kVA, 10MW Wärtsilä AMG Gas Power Plant with Heat Recovery Primary Power Generation: Wärtsilä W20V34SG Gas Engine - Output: 10,000 kW (10 MW) - Configuration: 20‑cylinder, spark‑ignited gas engine Psdjygx Tzopfx Adlsgk - Fuel: Natural gas - Year: 2013 Electrical Generation: AMG 1120LT08 DSE Generator - Rating: 12,163 kVA - Year: 2013 Heat Recovery System: Cochran Waste Heat Boiler - Thermal Output: 17,500 kW - Year: 2013 Cochran Economiser – Waste Heat Recovery Unit - Thermal Output: 2,719 kW - Year: 2013

Condition: used, This listing is for a Sartorius MSA124S Balance The unit is in full working condition and is ready for immediate release. The MSA124S is part of the Sartorius “Cubis” series of analytical balances, which are modular, high-performance instruments designed for milligram-level weighing. Very fine resolution / readability: it supports a readability of 0.1 mg (0.0001 g) in many configurations. Weighing capacity: around 120 g (for the “124” model) in the typical configuration. Excellent repeatability and linearity: e.g., repeatability ≤ ±0.1 mg, linearity ≤ ±0.2 mg. Pgjdexuqmnjpfx Adlok High-end interface and connectivity: E.g., Ethernet, USB, RS-232, optional Bluetooth; also SD-card reader for data transfer. Advanced ergonomic features: tiltable and removable display/control unit, motorised draft shield (in certain variants) to minimise environmental influences. Compliant with GLP/GMP/laboratory traceability requirements: audit trails, user profiles, leveling assistance etc in higher-end configurations Because of its high precision and fine resolution, the MSA124S is best suited for: Analytical laboratories performing gravimetric measurements, chemical/ pharmaceutical labs, material science labs. Applications where small sample masses must be weighed accurately (e.g., formulations, dosing, microparticles). Environments requiring audit-trail/logging, connectivity, and data export (e.g., regulated labs). Use cases where drift/offset must be minimised and environmental effects (drafts, vibrations, static) must be managed.

Condition: good (used), Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 9 mm -Length: 28.7 m -for electric cable winch -other crane ropes are also available -Price: per roll -Quantity: 1 roll available Pedoghnbzepfx Adlsgk -Weight: 10.5 kg/piece

Condition: good (used), Year of construction: 2016, Ref:11076 . 2016 Muller Martini SIGMA Three Knife Trimmer On demand trimmer for digital dooks finishing Features: Designed for the finishing of both offset- and digitally-produced books in a one-off, short-, or large-run workflow. Fully-automated, one-off book 3-knife trimmer. Ultra-efficient digital book trimming system with zero makeready for optimal one-off book production. Workflow can be consolidated and efficiently processed through the SigmaTrimmer work center with minimal production planning effort & considerable labour savings. Bound, untrimmed books of varying sizes and thickness can be fed into the SigmaTrimmer continuously, without stopping to change parts or key in any data. Book printers can cut books of different formats and thicknesses in quick succession, without interruption. The format for each book is read with a barcode scanner during infeed and all settings are made automatically, which eliminates makeready time. Specification: Max speed: 1,000 cycles/hr Max untrimmed size: 320x240mm Min untrimmed size: 154x108mm Max book thickness: 40mm Pedpfeyw Hwdex Adljgk Min book thickness: 2mm Max Front trim: 86mm Min front trim: 3mm Max foot trim: 75mm Min foot trim: 3mm 5 x Sigma trimmers available, all the same age. Can be bought individually or as multiples.

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: 100000997, operating hours: 50 h, CONDITION LIKE NEW. OPEN FRONTED VERTICAL MACHINING CENTRE WITH 4 SHEAR HARDENED & GROUND BOX GUIDEWAYS, ENHANCED ACCURACY & CUTTING PERFORMANCE. TABLE Working Surface - 1,150 X 600mm Tee Slot (Size x Number x Pitch) - 18mm X 5 X 120mm Maximum Table Load - 700 kg TRAVEL Longitudinal Travel ( X-Axis) - 1,000mm Cross Travel (Y-Axis) - 600mm Vertical Travel (Z-Axis) - 630mm Distance from Table Nose to Table Top - 100 – 730mm Distance from Spindle Centre to Column - 650mm SPINDLE Spindle Nose Taper BT-40 Spindle Speed - PULLEY DRIVEN (STD.) - 8,000 RPM GEAR DRIVEN - 6,000 RPM Podpfehzxwkex Adlogk FEED Cutting Feedrate - 12 M / Min Rapid Traverse (X and Y-Axis) - 20 M / Min Rapid Traverse (Z-Axis) - 20 M / Min ATC Tool Storage Capacity - S TYPE 20 (STD.) Tool Change Type - RANDOM Maximum Tool Weight - 6 kg Maximum Tool Diameter - S TYPE Ø95mm Maximum Tool Length - S:250mm Tool Shank - BT-40 Pull Stud Bolt - MAS P40T-1 MOTOR Spindle Drive Motor (Fanuc) (30 min) - 7.5 (STD.) kW ACCURACY Positioning - ± 0.005mm Repeatability - ± 0.003mm POWER SUPPLY Electric Power Consumption - 20 KVA Air Pressure - 6.5 KG / CM² Voltage - 415V / 50HZ / 3PH MACHINE Floor Space (Fully Guarded) - 2,900 X 2,640mm Height - 2,890mm Weight - S: 6,500 / A:6,700 kg FANUC 0IMF PLUS CNC STANDARD SUPPLIED MACHINE FEATURES • Fully Enclosed Splash Guard • Work Lamp • Spindle Air Curtain • Air Blast Through The Spindle • Automatic Lubrication System • Levelling Bolts And Blocks • Coolant Jets Around The Spindle • Operation And Programming Manuals • Tool Box • Electrical And Mechanical Manuals • Operation Finish Lamp • Automatic Power Off • Cooling System • Heat Exchanger In Control Panel

Year of construction: 2007, condition: good (used), For Sale: Neat Ibonhart horizontal bag loader Brand: Ibonhart Model: APH6 Year: 2007 Psdpfx Ajy Egyzjdlsgk - With automatic bag table system - Infeed and outfeed conveyors included - Adjustable distances set mechanically - Robust and reliable machine - Manual and documentation present - Central oil lubrication Maximum product dimensions: Length: 50 cm Width: 20 cm Height: 14 cm Capacity: 50 pieces per minute Machine inspection on location is possible. Price: €19,000 EXW Includes proper loading and packaging. Transport negotiable Subject to type and typographical errors.

Condition: used, total width: 700 mm, total height: 1,400 mm, Weight: 250 kg Dimensions (LxBxH): 125 x 70 x 140 cm - Documentation available: No - CE certificate present: No - Max. planing width [mm]: 260 - Max. planing height [mm]: 185 - Total table length [mm]: 1210 - Number of knives [pcs]: 3 - Diameter extraction nozzle [mm]: 100 - Height adjustment: Manual - Voltage [V]: 220 - Transport dimensions: 1250mm x 700mm x 1400mm (l x w x h) - Transport weight [kg]: 250kg - Transport packages [pcs.]: 1 Pedpfey Ax H Iex Adljgk Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2024, For Sale: Neat packaging machine + slicer from GHD Hartmann Brand: GHD Hartmann Slicer type: Hartmann Selectra Slicer 30 Packaging machine type: Hartmann Automat GBK 420 - Year of manufacture: 2024 - Comes complete with spare parts and full documentation, user manual, and electrical diagrams Included: - Powerfree infeed conveyor - Hartmann slicer - Automatic adjustable knife guide for slice widths Pedpfxjy Aw S As Adlegk - Oil control system - Hartmann GBK 420 packaging machine - Clip unit with laser + extraction system Total dimensions: - Infeed conveyor: 3 sections, total 8 meters long - Slicer: 2.70 meters long - Synchronizing conveyor: 2.10 meters long - Packaging machine: 5 meters long Subject to typing errors It is possible to view and inspect the machine on location. If you have any questions, feel free to ask! Price is EXW. Loading and packaging of the line is included in the price. Delivery possible upon consultation. Kind Regards, Leo Holland

Condition: not inspected (used), functionality: unexamined, overall weight: 400 kg, total length: 4,000 mm, total width: 800 mm, total height: 1,300 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Number of trolleys: 3 Various manufacturers Dimensions per trolley (L x W): 1,200 x 750 mm 1,000 x 500 mm 1,000 x 500 mm Pgsdey D T E Iepfx Adlok MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,000 x 800 x 1,300 mm Weight: 400 kg External reference: 55

Condition: ready for operation (used), Year of construction: 1957, machine/vehicle number: 299B/57, functionality: fully functional, pressing force: 125 t, stroke length: 116 mm, ram adjustment: 70 mm, sheet thickness (max.): 13 mm, stroke rate (max.): 50 1/min, No minimum price – guaranteed sale to the highest bidder! Placing a bid constitutes a commitment to collect the item within the period of 23.06.2026 to 26.06.2026! TECHNICAL DETAILS Working pressure: 125 t Podpfoy D Nx Rsx Adljgk Max. sheet thickness: 13 mm Strokes per minute: 50 Ram stroke: 6 to 116 mm Ram adjustment: 70 to 15 mm MACHINE DETAILS Control manufacturer: MASCH Dimensions & Weight Dimensions (L x W x H): 3,000 x 2,100 x 2,800 mm Machine weight: 10,000 kg EQUIPMENT Protective enclosure External reference: 51

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 10024150, Sewing machine Muller Martini Ventura MC-200, Machine speed* Mechanical of 18 to 200 cycles/min, max. 12 000 cycles/h, min. signature length 120 mm, max. signature length 510 mm, min. signature width 75 mm, max. signature width 320 mm, max. signature thickness 4 mm, Lap opening min. 8 mm, low or high folio lap, Stitches Number of stitches standard 13, staggered 14, Stitch length 16.5 mm with/without blind stitch possible for all stitch types Sewing machine Muller Martini MC 200 Pgjdpfsx Rywkjx Adlek