Used Auerbach Auerbach Fbe 3000 for sale (4,865)

Condition: used, Year of construction: 2002, sheet width 3050 mm plate thickness 6 mm rear stop 1000 mm cutting angle 0,5 - 3 ° down holder 18 Stk no. of strokes 9-17 Hub/min total power requirement 7,5 kW dimensions of the machine ca. 3800 x 2000 x 1600 mm weight 4500 kg Equipment: - electric backgauge - electric cutting angle adjustment - manual cutting gap adjustment Nwsdpfx Ajyrhvvohzeg - SP 9 control unit - Safety guard behind the machine incl. light barrier - front finger guard - 1x side stop - operating instructions

Condition: used, Year of construction: 1998, sheet width 3050 mm plate thickness 6 mm rear stop 10 - 750 mm cutting angle 0,5 - 3 ° down holder 18 Stk no. of strokes 9 / 14 Hub/min total power requirement 7,5 kW dimensions of the machine ca. 3750 x 1600 x 2450 mm weight 4800 kg Features: Nwodpfxow S Nkne Ahzjg - Electro-hydraulic, slide-guided sheet metal guillotine shears - Front control panel, front left - With electro-hydraulic cutting angle adjustment - With manual cutting gap adjustment, from the front (eccentric) - Electric motor rear stop 10-750 mm (ball screws) - With analog position display + hand wheel for fine adjustment - 1x side stop - 3x support arms - 1x freely movable foot switch - Front finger guard - Operating instructions (PDF)

Year of construction: 1997, condition: excellent (used), PBR T35SNC x 3000 cycle turning machine Year of manufacture: 1997 Control: Fagor Center distance: 3000 mm Max. turning diameter: 630 mm Center height over bed: 300 mm center height over slide: 165 mm spindle bore: 105 mm Rotational speed: 2000 rpm weight: 6200 kg Accessories incl: Multifix set (without steels), chuck (See photos) + additional chuck. Nwjdpfx Ahoil Hzzjzsg No responsibility is taken for the accuracy, completeness and timeliness of the information.

Condition: refurbished (used), battery voltage: 48 V, total height: 625 mm, total length: 827 mm, total width: 519 mm, Tested forklift battery for your forklift - 48V 4PZS 500Ah - DIN A + 1-year warranty + Includes Aquamatik (automatic electrolyte filling system) + Includes end cell connector & REMA 320 plug (other plugs can be installed upon request) + Capacity: minimum 90-100% (C5 capacity report provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 827 mm Width 519 mm Height 625 mm Weight: approx. 710 kg Suitable for the following models and more: Linde E 12 - 386-00 Linde E 14 - 335-00 Linde E 14 - 386-00 Linde E 14 - 386-02 – side battery change Linde E 15 S - 335-00 Njdpfxoy Rnklo Ahzjwg Linde E 16 - 386-00 Linde E 16 C - 386-00 Linde E 16 C - 386-02 – side battery change Linde E 16 L - 335-00 Linde E 18 - 386-02 – side battery change Linde E 18 C - 335-00 Linde E 20 L - 386-00 Linde T 30 R - 143-00 Still FU-X 20 Still R 20-14 Yale ERP 15 VT Yale ERP 16 VT Jungheinrich EFG Jungheinrich EFG 110 K Jungheinrich EFG 213 Jungheinrich EFG 215 Jungheinrich EFG 216 K Jungheinrich EFG 312 Jungheinrich EFG DF 16 Jungheinrich EFG W 1 Jungheinrich EKE 20 Toyota 7FBEST10 Toyota 8FBE15T Toyota 8FBKT16 Toyota 8FBMT15 Toyota/BT C3E120 Toyota/BT CBE 1.2 Toyota/BT CBE 1.5 Toyota/BT SSE 135 Crown 3 Crown RT 3000 Crown SC 1016 Crown SC 1018 Crown SC 3210 Crown S6 5320-1 Crown SCT 6020 Balkancar EV698 Caterpillar EP13PNT Caterpillar EP15PNT Cesab 5 Cesab B315 Cesab B315A Cesab CBE1 Clark GEX16 Clark SC5310-1.3 Clark TM 16N Hyster J1.5XNT SW Komatsu FB15M Mitsubishi FB13PNT Mitsubishi FB15PN Mitsubishi FB15PNT OM-Pimespo-Fiat XE 15 OM-Pimespo-Fiat XE 18 Common battery sizes available upon request. Transport can be arranged.

Condition: good (used), turning diameter over cross slide: 870 mm, spindle bore: 162 mm, turning length: 3,000 mm, turning diameter: 870 mm, center width: 3,000 mm, Distance between centres: 3000 mm Swing: 870 mm over bed, 560 mm over cross slide Weight between centers: 3.600 kg without steady 4.400 kg with 1 steady 5.600 kg with 2 steadies Spindle speeds: 0 - 900 Rpm Spindle bore: 162 mm CNC Controller: Fagor Featured with: Nedpjw Sm U Djfx Ahzewg - Additional chuck at back end of main spindle (oilcountry) - 1 fixed steady Ø420 mm - 1 moving steady - 4-jaw chuck Ø800 mm - 3-jaw chuck Ø 400 mm - 10 Toolholders - Coolingpump/chiptray at back end - Machine documentation Country of origin: Spain Motor power: 30 kW Machine weight: 9.000 kg Machine LxWxH: 5,1 x 2,4 x 2,0 mtr.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 70,119 h, machine/vehicle number: A0111A0021, controller model: TruControl 1000, laser source model: Festkörperlaser, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,270 mm, Equipment: CE marking, safety light barrier, TECHNICAL DETAILS Working area: 2,500 x 1,270 mm Parts flap: 300 x 500 mm Clamping claws: 2 units Laser Solid-state laser: TruDisk 3001 LLK outlets: 1 unit Fiber optic cable: 10 m Cutting head Lens focal length: 200 mm MACHINE DETAILS Operating hours Laser on-time: 70,119 h Total operating hours: 73,936 h Control Laser control: TruControl 1000 Screen size: 15" EQUIPMENT Robust, easily accessible C-frame Precision linear guide system for high-accuracy processing Linear magazine including 2 clamping claws Maintenance-free drives Repositioning device with programmable hold-down Brush tables Good parts container Chip bin Enclosed beam guidance via fiber optic cable ContourLine FocusLine NitroLine Chiller unit Nwedpfx Ahjy R Uatszjg Diode-pumped excitation for long service life Upgradeable for up to 3 additional LLK outlets Quick-change cutting head system ControlLine Electro-hydraulic punching head Programmable hold-down plate Tool length compensation Punch lubrication spray Slug extraction system Open control based on Bosch PNC-P Control panel with TFT color display Teleservice via Internet Automatic shutdown USB port Network connection CE marking Multi-beam light barriers Laser source safety monitoring system Quick disconnect for hydraulics Scatter radiation protection Additional LLK outlet for operation with Trumpf system MultiTool function MultiBend function Thread forming function Marking / fast embossing function Roller and deburring technology function Softpunch function Adaptive stroke calibration Spray lubrication for die Additional clamping claw Individually opening clamping claws Height-adjustable clamping claws Automatic clamping claw closing Repositioning cylinder with height-adjustable pressure pieces Sensor for parts chute Loading/unloading aid for brush tables Vibration-damped foundation Chip conveyor with tilting bin Liftable brush segment Parts conveyor belt

Condition: new, 0 ja Working width 3000 (3500) mm 0 ja Ruchser RU-BM-3000 (option: 3500) Wing assembly table ----- Herstellerbeschreibung: Item 1.0 Article 0610000 RU-BM-3000 Sash assembly table, for sashes up to max. 2500 mm height with RU-SH, special screwdriver length 3000 mm, width 1400 mm, inclination of working platform manually adjustable. Usable width 2500 mm Holder for hardware shears or hardware punch. 10 swivel-mounted pendants for hanging the sashes, completely pneumatically foldable for unhindered movement of the sashes on the table surface. Device for scanning the sash fitting length for constant and variable/centered handle fit and any handle fit height for pre-drilled sashes, colour-coded dimension recognition for the fittings. Pendulum height can be set to 50 or 60 mm on one stop. RU-SH, special screwdriver with pneumatic depth cut-off mounted on carriage, safety control, pneumatic height adjustment, screw feeder with automatic switch-off of the filling container manual insertion for a second screw length on the special screwdriver, accessories. RA-8, turret stop for 8 screw levels mounted on the carriage. RA-4 commuter rail manually adjustable in depth against left and right one 4-fold turret stop each. Nsdpfx Aet Tq Aaohzewg PSF - Pneumatic clamping device for sashes against the lateral stops. Working height adjustable from 900 - 1000 mm. Please specify whether felt, sliding or brush strips should be used as a support. Item 1.1 Article 6315 RU-BM-... adjusted to customer's fitting specification Item 1.2 Article 0500000 Holder adjusted to customer punching press/ shear For mounting a customer-supplied punching press or shear (other manufacturer) on the sash assembly table. Please specify make when ordering !!! ----- Price RU-BM-3000 in the above version ex works: on request! ----- Fitting bearing options for RU-BM-3000: ----- Version with fixed fitting bearing: Price EUR 5.468,00 Article 0630000 RU-BL-30/30 Fixed fitting storage unit Mounted above the leaf assembly table Length 3100 mm, depth 1250 mm, with 3 shelves with 10 compartments each, divided by partitions. Freestanding version: Price EUR 6.017,00 Item 0710000 RU-SBL3000/30 Freestanding storage unit, Length 3100 mm, depth 1250 mm, height 2050 mm, upright frame on the front without supports, 30 compartments, 10 in a row, each divided by partitions and a continuous shelf at the top, size of the compartments: width 280 mm, height 150 mm 4 pcs. Angle supports for corner deflections: Price 609,00 EUR Side length 120x120mm; inclination approx. 3° The front edge of the angles is bent up 5mm to prevent accidental unloading. 2 pieces on the left and 2 pieces on the right under the first shelf of the fitting. ----- Surcharge for RU-BM-3500 ----- Article 0610300 RU-BM-3500 Sash assembly table for sashes up to max. 3000 mm height with RU-SH, special screwdriver length 3500 mm, width 1400 mm, inclination of working platform manually ble width approx. 3000 mm Surcharge RU-BM 3500 to RU-BM 3000: EUR 2,811.00 Fitting bearing for RU-BM-3500 (only free-standing possible): Price EUR 6,665.00 Item 0710007 RU-SBL3800/36, free-standing fitting storage Length 3800 mm, depth 1280 mm, height 2060 mm...

Condition: excellent (used), Door closer, floor door closer, closing mechanism -Manufacturer: Geze, Pendulo C door closer, unused -Function: Swing door 90 DEGREE - only locks at 0 degrees - 90 DEGREE .: 3000-002336 H06-14-00-00 -Number: 43 door closers available -Price: per piece -Dimensions: 315/45/H65 mm -Weight: 1.3 kg Nwodpexd Tzaofx Ahzsg

Condition: used, operating hours: 11,562 h, total height: 1,900 mm, total length: 5,600 mm, total width: 2,000 mm, Empty weight: 8.500 kg Price: On request - Documentation available: No Nwedpfxswp H Efo Ahzsg - CE certificate present: No - Operating hours: 11562 - Drive system: Conventional - Power [kW]: 30.0 - Centre height [mm]: 500 - Swing over bed [mm]: 1000 - Distance between centres [mm]: 3000 - Spindle bore [mm]: 105 - Min. spindle speed [rpm]: 2.24 - Max. spindle speed [rpm]: 450 - Transport dimensions: 5600mm x 2000mm x 1900mm (l x w x h) - Transport weight [kg]: 8500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2021, Empty weight: 3.043 kg Price: On request Nodpfsyrpmiox Ahzowg - Year: 2021 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 6015400 - Number of filter bags [pcs]: 200 - Filter length [mm]: 2600 - Filter diameter [mm]: 200 - Filter surface area [m²]: 340 - Connection diameter [mm]: 750 - Number of connections [pcs]: 1 - Main fan [pcs]: 1 - Main fan power [kW]: 45.0 - Control cabinet present: Yes - Transport weight [kg]: 3043kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Suitable for twist-off caps Suitable for screw caps Capacity: up to 30,000 caps per hour Nwedpfjy A Tk Ijx Ahzeg Magnetic elevator belt

Condition: ready for operation (used), Year of construction: 2011, clamping force: 4,200 kN, screw diameter: 80 mm, injection weight: 1,464 g, total height: 2,500 mm, overall weight: 25,500 kg, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, product length (max.): 7,300 mm, This Krauss Maffei 420-3000 CX was manufactured in 2011. A robust hydraulic injection molding machine from Germany, it features a clamping force of 4200 kN and a screw diameter of 80 mm. It supports a shot weight for PS of 1464 g and an injection rate of 478 cm³/s. Ideal for high-volume production with its 1200 cycles/h dry cycle rate. Contact us for more information about this machine. • Electrical data: • Power supply: 400 V / 3N~ / 50 Hz • Installed heating power: 36 kW • Rated pump motor power: 75 kW • Number of barrel heating zones: 7 • Performance and control: • Dry cycles (Euromap 6): 1,200 cycles/h • Control system/version: MC5 3.3 Nsdpfx Aeydnp Hshzswg • Machine color: grey / white / blue • Clamping unit: • Mold opening force: 249.6 kN • Distance between tie bars: 800 × 800 mm • Moving platen force (open/close): 124.7 / 102.4 kN • Platen dimensions: 1270 × 1200 mm • Mold opening stroke: 1020 mm • Minimum mold height: 380 mm • Ejector stroke: 250 mm • Platen opening stroke: 1400 mm • Injection unit: • Nozzle tip radius: 15 mm • Nozzle orifice diameter: 6 mm • Injection pressure: 1856 bar • Injection volume: 1608 cm³ • Injection rate: 478 cm³/s

Condition: excellent (used), Year of construction: 2007, ILAPAK DELTA 3000 LDR B SX | Flowpack packaging machine (Horizontal packaging line) Manufacturer: ILAPAK International S.A. Model / Type: DELTA 3000 LDR B SX Nodpfxey Umlve Ahzjwg Serial number: D.230.04.061 Year of manufacture: 09/2007 Power supply: 400 V / 50/60 Hz / 3 phases Power: 7500 W Width of infeed belt: 300 mm Dimensions of sealing area: Seal length: 400 mm Seal width: 400 mm Overall dimensions: 4000 x 1450 x 1950 mm Markem-Imaje laser printer FUME EXTRACTION AND FILTRATION SYSTEM Brand: BOFA International Ltd Model / Type: ES400i Serial number: 06/07/ES400i-771 Year of manufacture: 06/2007 Power supply: 220-240 V / 50/60 Hz Rated current: 6.20 A Dimensions: 720 x 440 x 800 mm Compatible filter cartridges: 0695916 & 10001304 Machine is incomplete The Ilapak Delta 3000 industrial flowpack is one of the most highly regarded horizontal HFFS (Horizontal Form Fill Seal) packaging machines on the market, designed for continuous operation at high production rates. Machines in the Delta 3000 series are characterized by a design based on multi-axis servo drive technology, which allows for precise control of the film feeding process, product positioning, and cutting of finished packages. The LDR version with bottom film feeding is an ideal solution for packaging products with irregular shapes, sticky or easily deformable products (e.g., fresh meat, cheeses, bakery products with or without trays, medical products). The unit presented here was factory-integrated with an advanced laser marking system from Markem-Imaje. The use of a laser coder allows for contactless, permanent and extremely aesthetic application of expiration dates, batch numbers or barcodes directly onto the packaging film during its unwinding, without the need for costly thermal transfer ribbons or ink. To ensure complete operator safety and a clean working environment, the set includes a dedicated, high-performance BOFA ES400i extraction system. The task of this device is to immediately suck up and neutralize the smoke and microscopic particles generated during laser ablation of the film structure, protecting the operators' lungs and the laser optics from contamination.

Condition: good (used), Year of construction: 1999, Ref. -No.: 10365 Manufacturer: MONFORTS Type: KNC 8 S - 3000 Year of construction: 1999 Type of control: CNC Control: MTC K Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 178.05 X stroke: 455 mm Z - stroke: 2850 mm Chuck diameter: 315/400/500 mm Centre Distance: 3000 mm Nwjdoy Edz Aopfx Ahzeg Feed Capacity - Z: 23,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 6,8 m / min Rapid Travel Speed Z-Axis: 4 m / min Circumferential diameter over radial slide: 540 mm Max swing diameter: 830 mm travel of the cross slide: 450 mm Spindle head max. passage for violent material: 88 mm Spindle head max. passage for bare material: 90 mm Tailstock outside diameter of the quill: 125 mm Tailstock maximum quill stroke: 200 mm Tailstock inner cone: MK6 Type hydraulic tank: 15 L. coolant reservoir: 220 L. Coolant tank at chip conveyor: 160 L. Machine length: 5200 mm Machine width: 2110 mm Machine Height: 1995 mm Weight Of The Machine Ca.: 6,850 (Ohne Späneförderer und Kühlmittelbehäter) t Headstock Spindle Head: DIN 55027 - 11x290 Further information: Additional lubricating oil tank approx. 6l incl. tools Machine is under power and can be inspected by arrangement.

Condition: used, Year of construction: 2002, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 3,000 mm, turning diameter: 630 mm, spindle bore: 90 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 2 rpm, travel distance X-axis: 355 mm, travel distance Z-axis: 3,000 mm, spindle motor power: 10 W, rapid traverse X-axis: 8,000 m/min, rapid traverse Z-axis: 5,000 m/min, total width: 1,850 mm, quill travel distance: 180 mm, quill diameter: 100 mm, quill stroke: 180 mm, workpiece weight (max.): 3,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, POREBA CNC TRP 63 Year of manufacture: 2002 Njdpfeyhp Ekex Ahzswg Condition: used Machine under power, inspection possible Technical data: • Type: TRP 63 MN • Control: SIEMENS SINUMERIK 810D • Serial number: 7402-09-03006-03 • Centre height: 325 mm • Centre distance: 3000 mm • Spindle bore: Ø 90 mm • Main drive: 10 kW • Power supply: 3 × 380 V / 50 Hz Equipment: • MULTIFIX C tool turret (without holders) • Tailstock with manual quill feed • 2 electronic handwheels • Chip conveyor • Coolant system (pump integrated in chip conveyor) • Rear safety guard

Year of construction: 2021, condition: used, Serial no. P61483, PC control, manufacturer Innomatec, touch display, process chamber, compressor station, peripheral units, roller trolley for crate provisioning. Subject to prior sale. Njdpfx Asy A Ir Hjhzjwg

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, conveyor belt length: 3,000 mm, conveyor belt width: 4,000 mm, Type ZN 3000/400 Length 300 cm Nwedpfx Ahoyh Uhnozsg Width 40 cm

Condition: used, Cutting length: 3000 mm Cutting height: adjustable, 0 - 45 mm Nwsdpjy Hrzaofx Ahzog Saw unit: 1.8 kW Clamping mechanism: operated via handwheel Location: Nattheim

Condition: used, Year of construction: 1998, turning length 3.000 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 3.700 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MC / 3000 equipped with a well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. Nsdoxb Efrjpfx Ahzjwg - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MC3000 | N40MC

Condition: used, Guideway and surface grinding machine WMW FRITZ HECKERT Aschersleben type SZ 1000 x 1250 x 3000 / 344 make no. 13.2236.2 year of construction 1989 nominal grinding area 3000 x 1250 mm table clamping area 3240 x 1000 mm grinding length max. 3300 mm Machining width 1250 mm Machining height 1250 mm grinding wheel diameter (surface grinding support) max. 600 mm grinding wheel width (flat grinding support) max. 100 mm grinding wheel diameter (swivel support) max. 450 mm Mains connection 400 Volt, 50 Hz - grinding support swiveling, drive power 16,5 kW, infinitely variable speed - grinding support for surface grinding, drive power 15 kW, infinitely variable speed - new electrical control, based on SIEMENS S7 from year 2001 - new electric control cabinet beside, year of construction 2001 - infinitely variable grinding wheel speed at both grinding supports - swiveling wheelhead for guideway and profile grinding - swivel-mounted and height-adjustable control panel - coolant system adjacent - Hydraulic system adjacent - oil circulation lubrication adjacent - Various grinding wheels and holders space requirement complete L x W x H 11900 x 7700 x 4600 mm weight 45 ton. Nsdpfxohv A A Ds Ahzswg very good condition

Year of construction: 1999, condition: ready for operation (used), - USED - 6-AXIS SYNCHRONIZED CNC PRESS BRAKE WITH HYDRAULIC CROWNING AXIS: Y1 - Y2 - X - R - Z1 - Z2 BENDING LENGTH: 3100 mm TONNAGE: 165 ton THROAT DEPTH: 450 mm DISTANCE BETWEEN UPRIGHTS: 2600 mm OPEN HEIGHT: 440 mm UPPER BEAM TRAVEL: 250 mm APPROACH SPEED: 100 mm/sec RETURN SPEED: 120 mm/sec Njderk Sg Ropfx Ahzowg WORKING SPEED: 0-10 mm/sec MOTOR POWER: 18,5 kW CONTROL UNIT: DELEM DA 65 WEIGHT: 12020 Kg OVERALL DIMENSIONS: 4100 x 1880 x 2920 mm NOTE: No 2 FRONT SUPPORT BRACKETS; BOTTOM HYDRAULIC TOOL LOCKING

Condition: excellent (used), Year of construction: 2018, Krauss Maffei KM 400-3000 GX Blue Power with Krauss Maffei LRX 250 Robot Year of manufacture: 2018 Injection Unit: Screw diameter: 80 mm Injection weight: 1464 g Injection pressure: 1855 bar Dosage volume: 1608 ccm Clamping Unit: Clamping force: 400 t Tie bar distance: 920x830 mm Platen size: 1280x1240 mm Nodpfoy Sl D Eex Ahzowg Ejector: hydraulic Clamping unit: hydraulic Control system: MC5 - touchscreen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Min./max. mould height: 400/900 mm Air valves x 4 Hydraulic core pull x 4 Hot runner control system x 36 Self-closing nozzle x 10 Injection unit hardened – bimetallic Proportional valve on injection unit – precise injection Automatic upper tie bar withdrawal function Machine has been regularly serviced by authorized Krauss Maffei service Krauss Maffei LRX 250 Robot Year of manufacture: 2018 High-speed robot 5-axis robot: 5 axes driven by servo motors (electric): X, Y (telescopic), Z, B (rotation), and C Vacuum Touch control panel Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt at additional cost Dimensions: Weight: 22,650 kg Length/Width/Height: 7.58x2.73x2.32 m All offered machines are started up by our service technicians prior to sale. It is possible to receive a video of the selected machine's technical testing or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Nedpfx Ahovvkmbjzewg Storage location: Nattheim

Condition: used, Material clamping via handwheel. Cutting length 3000 mm. Max. cutting height 60 mm. Storage location: Nattheim Nsdpfx Ahovvkblszjwg

Condition: new, Year of construction: 2025, functionality: fully functional, Pressure: 125 t Bending length: 3000 mm Frame width: 3100 mm Control unit: Cybelec VisiTouch 24MX Stroke: 300 mm Installation height: 500 mm Rapid traverse down: 200 mm/s Bending speed: 0–12 mm/s Total power requirement: 15 kW Machine weight approx.: 11,500 kg Dimensions: 4080 x 3110 x 1800 mm Standard equipment: Nwsdpfxjx Sq Hle Ahzeg Basic configuration: - CNC control Cybelec CybTouch 15 - Axes: Y1–Y2–X–R - Fully dynamic crowning system - System for compensating frame deflection – G-REFLEX - Backgauge system model GHP-4 - Servo-driven main motor - LED display at the press beam for visualizing positioning of the backgauge - Safety system: DSP AP+MCS - HAWE hydraulic system - CE standard compliant - Upper and lower tool clamping PROMECAM system, mechanical