Used Traub Td 36 for sale (81)

Year of construction: 2000, condition: ready for operation (used), Offered is a CNC lathe Traub. Number of spindles: 2, spindle height above floor: 1130mm, max. turning diameter: 36mm, max. bar diameter: 36mm, max. turning length: 100mm, max. main spindle speed: 6300rpm, max. counter spindle speed: 6300rpm, main spindle power: approx. 10.7kW, counter spindle power: approx. 10.7kW, drive power range: main spindle travel X/Z: 370mm/250mm, counter spindle travel X/Z: 370mm/250mm, tool turret: 12, turret travel X/Z: 50mm/100mm, Y-axis turret: +/-20mm, max. speed of driven tools: 6000rpm, front tool positions: 5, rear tool positions: 5, control: Traub TX 8i. Weight: approx. 4000kg, machine dimensions: X/Y/Z: approx. 3400mm/1300mm/1700mm. Documentation available. Inspection possible by arrangement. Blsdpfx Aiszidirohsi

Condition: ready for operation (used), Year of construction: 2003, operating hours: 124,706 h, spindle speed (max.): 6,300 rpm, travel distance X-axis: 370 mm, travel distance Z-axis: 250 mm, spindle motor power: 10,700 W, controller manufacturer: TRAUB, controller model: TX8i (64-bit), number of axes: 6, This 6-axis TRAUB TNK 36 was manufactured in 2003. It features a maximum spindle speed of 6,300 rpm and a main spindle bore of 36 mm. The machine is equipped with advanced capabilities such as tool monitoring, rigid tapping, and a high-pressure coolant system. If you are looking to get high-quality turning capabilities, consider the TRAUB TNK 36 horizontal turning machine we have for sale. Contact us for further details. TECHNICAL DATA • MDE Interface: Yes • Tool Monitoring: Yes • Rigid Tapping: Yes (without compensation chuck) • Main Spindle Bore: 36 mm • Main Spindle Drive Power: AC 6.7 / 10.7 kW • Top Turret Stroke X/Z: 50 / 100 mm • Rear Attachment Stroke X: 73 mm • Rear Attachment Stroke Y: ±50 mm • Main Spindle C-Axis: Yes • Hainbuch Change Parts: Yes • Hainbuch Setup Aid Base Body: Yes • Hainbuch Manual Change Device: Yes • Counter Spindle: Motor Spindle • Counter Spindle C-Axis: Yes • Counter Clamping Pressure Device: Yes • Workpiece Ejection Device: Yes • Hainbuch Axfix Chuck: Yes • Upper Tool Carrier: Yes • Electronic Gearbox: Yes • X3 Cross Axis for Front Unit: Yes • Front Unit: 5-position • Driven Tools on Front Unit: Yes • Cut-Off Side Machining Station: Yes • Driven Tools on Cut-Off Side Station: Yes • Workpiece Unloading Device: Gripper • Coolant Tank Capacity: 230 l • Coolant Pressure: 7 bar • Coolant Flow Rate: 50 l/min • Internal Coolant Supply: 30 bar • High Pressure Coolant: 120 bar (front and rear machining station) • Coolant Filter: Knoll VRF 150/750 Vacuum Rotary Filter • Suitable Materials for Filter: Aluminum, Plastic, Brass, Steel • Wash Gun: Yes • Connected Load: 22 kW • Maximum Bar Length: 3 m • Maximum Bar Diameter: 36 mm • Operating Voltage: 400 V, 3~, 50 Hz • Control Voltage: 24 V AC Blodpfxjza Ucxs Aihji • Valve Voltage: 24 V DC • Clutch Voltage: 24 V DC • Total Installed Power: 33 kW • Total Rated Current: 60 A ADDITIONAL EQUIPMENT OPTIONAL • FMB turbo 5-42 XT / 3200"C" Bar Feeder • Bar Feeder Year: 2003 • Hinged Belt Chip Conveyor • Chip Conveyor Discharge Height: 950 mm • Guide Tubes D25, D36 • Running Workpiece Stop, Shank 16 × 16 mm • Brankamp CMS 100 Collision Monitoring Technical Specification Through-spindle Coolant Yes Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 2003, CNC turning center TRAUB TNK 36 Year of manufacture: 2003 Bodpfjzaud Asx Aiholi Control: TX8i (64 bit) Flat screen monitor, 10.4 inches Additional V24 RS232 interface in the control cabinet MDE interface in the control cabinet (machine is running, piece counter) Tool monitoring for thread cutting without compensation chuck Main spindle: Spindle bore 36 mm, maximum speed 6,300 rpm Drive power AC 6.7 / 10.7 kW C-axis Quick-change parts Hainbuch, mounting aid, base body Quick-change device Hainbuch, manual Counter spindle: Counter spindle as a motor spindle with C-axis Device for counter pressure, workpiece ejection device, Axfix chuck Hainbuch Tool holder, top, driven tools, electronic gearbox X3 cross axis for front tool holder, front tool holder, 5-position, driven tools Cut-off station, driven tools Workpiece removal device: Workpiece gripper Gripper jaws D5-8, D8-20, D20-36 Coolant system: Tank 230 l / 7 bar / 50 l/min. Internal coolant supply 30 bar High pressure 120 bar at the front and rear machining stations, vacuum rotary filter Knoll VRF 150/750 (suitable for aluminum, plastic, brass, and steel) Coolant gun Hinged belt chip conveyor, discharge height 950 mm Preparation for installation of bar feeder magazine (guide tube D25, D36) Workpiece stop, rotating (shank 16x16) Collision monitoring Brankamp CMS 100 on main and counter spindle Machine without known defects.

Year of construction: 2003, condition: ready for operation (used), Tool monitoring, thread cutting without compensating chuck, main spindle: spindle bore: 36mm, max. speed: 6300rpm, drive power: AC 6.7/10.7kW, C-axis, Hainbuch change parts, installation aid base body, Hainbuch manual changing device, counter spindle: counter spindle as motor spindle, C-axis, device for counter clamping pressure, workpiece ejector device, Hainbuch Axfix chuck, upper tool carrier, driven tools, electronic gearbox, X3 cross axis for front attachment, 5-position front attachment and cut-off side machining station with driven tools, machine and control cabinet RAL 7037 (dust grey), covers RAL 7035 (light grey), workpiece discharge device: workpiece gripper, gripper jaws D5-8, D8-20, D20-36, coolant lubrication system: tank 230l/7bar/50l/min, internal coolant supply 30bar, high pressure 120bar at the front and rear machining station, Knoll VRF 150/750 vacuum rotary filter (suitable for aluminum, plastic, brass and steel), flushing gun, connected load: 33kW, control system: TX8i (64bit), flat screen 10.4 inch, additional piece counter, V24 RS232 and MDE interface in the control cabinet, operating hours: 124,705h, with FMB TURBO 5-42XT/3200/C bar feeder magazine, chip conveyor, coolant unit and basic equipment of static and driven tool holders. An on-site inspection is possible. Blodpfx Aey U Nq Ijihsi

Condition: used, Year of construction: 2005, turning diameter 5-42 mm turning length 3200 mm control Traub TX8i x-axis 50 mm z-axis 50 mm weight of the machine ca. 4000 kg Bedpfx Aey Nd U Doiheli

Condition: good (used), Year of construction: 2001, TNK 36, year of manufacture 2001 including chip conveyor, Resy filtration system Blsdpfx Ajxv Sr Ieihei In good condition, operated without loader, not under power

Condition: used, Year of construction: 1988, Technical details: turning diameter over bed: 360 mm turning dia. over face-slide: 160 mm turning length: 800 mm longitudinal traverse (z-axis): 810 mm facing movement (x-axis): 205 mm control: TX-8 spindle passage: 60 mm revolution per minute: 63 - 3150 / 2 step U/min feed:: 10.000 mm/min. tool turret - number of stations: 8 operating hours - idle run: 8834 h tailstock taper ISO: SK30 DIN 2080 tailstock quill stroke: 105 mm operating pressure: 40 bar total power requirement: 38 kW Weight approx.: 3,1 t Bsdsu Rqabepfx Aihsli dimension machine xH: 1,8 x 3,3 x 1,8 m dimensions of hydaulic: 580 x 400 x 750 mm Equipment: Lathe chuck Ø 200 mm, hydraulic Feed force Z-axis = 8 kN and X-axis = 5 kN Coolant system control panel Accessories Fine adjustment device for tool set-up *

Year of construction: 1986, condition: ready for operation (used), Turning diameter over bed/face slide: 360mm/160mm, center distance: 800mm, travel X/Z: 205mm/810mm, speed: 3150rpm, spindle bore: 60mm, tool positions: 8, rapid traverse X/Z: 10m/min. Machine dimensions X/Y/Z: approx. 3300mm/1800mm/1800mm, weight: approx. 3300kg, control: Traub System TX-8. An on-site inspection is possible. Bjdpfowmqx Djx Aiholi

Condition: used, Year of construction: 2005, Technical details: turning diameter: 275 mm Bjdpfx Aswp D Nbeiholi turning length: 900 mm spindle passage: 65 mm power capacity at 100 % load: 25/20 kW spindle turning speed range: 1 - 5000 U/min spindle diameter in front bearing: 110 mm c-axis: 1 - 500 U/min. number of workpiece supports: 4 tool turret: 1 x-axis: 290 mm y-axis: 165 mm z-axis: 360 mm b-axis: 360 ° rapid speed: 18/30 m/min number of tools: 2x2 + 2x2 number of driven tools: 2x2 + 2x2 mm toolpiece turning speed range: 8000 / 2000 U/min power capacity: 25% ED 5,8 kW tool taper: TRAUB 60 tool turret: 2/3/4 x-axis: 170 mm z-axis: 600/950 mm y-axis: +/- 60 mm rapid speed: 18/15/30 m/min number of driven tools: 10 mm toolpiece turning speed range: 1 - 6000 U/min power capacity: 25% ED 5,8 kW tool taper: DIN 69880 40 x 63 total power requirement: 95 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 10,0 x 3,5 x 3,0 m with CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000, Main and Sub spindle with C-axis 1 support with B-axis 3 turret supports dust exhauster, coolant attachment with coalescence-seperator and chip conveyor 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package *

Condition: ready for operation (used), Year of construction: 1999, operating hours: 124,009 h, number of axes: 5, This 5-axis TRAUB TNC65 DG was manufactured in 1999. It features a robust control system with TRAUB TX8H technology, dual tool carriers with 10 stations each, and a maximum clamping diameter of 60 mm. The machine is equipped with a coolant cleaning system and a hinged belt conveyor for efficient chip removal. If you are looking to get high-quality turning capabilities, consider the TRAUB TNC65 DG horizontal turning machine we have for sale. Contact us for further details. • Control system: TRAUB TX8H (32-bit technology) • Main spindle: Yes • Counter spindle: Yes • Spindle synchronization: Yes • C-axis main spindle: Yes • C-axis counter spindle: Yes • V-axis: Yes (programmable position) • Tool carriers: 2 (tool carrier I and II) • Driven tools on tool carrier I: Yes • Driven tools on tool carrier II: Yes • Number of tool stations: 10 per tool carrier • Thread cutting: Without compensating chuck • Drilling and milling units: X-direction (i=1 and i=3) and Z-direction (i=1 and i=3) • Coolant system: Cleaning system with cyclone filter • Coolant tank capacity: approx. 470 liters • Coolant pump: Supply for both turrets integrated • Hydraulic system: Yes • Operating voltage: 400 V / 50 Hz • Control voltage: 24 V DC • Accessory voltage: 230 V / 50 Hz • Multi-range transformer: 460 V / 400 V / 380 V / 220 V / 200 V • Standards: EC Machinery Directive, EMC Directive, Low Voltage Directive, DIN EN 292, DIN EN 294, DIN EN 418, DIN EN 60204 • Tool monitoring: Tool breakage and wear monitoring • Programming software: TRAUB Polyform • Coolant type: Water-based coolant compatible Additional equipment • Chip conveyor: Hinged belt conveyor • Bar feeder: TRAUB DNH 61-3000 (preparation included) • Workpiece ejection device: Yes • Workpiece removal device: Yes, with gripper • Collet system: Röhm, max clamping diameter 60 mm Technical Specification Counter Spindle Yes Bodpfxezim Hgo Aihsli Driven Tools Yes

Condition: used, Year of construction: 1996, max. turning diameter 395 mm Max. Turning length 750 mm control System TX 8H max. Spindle speed 3.150 U/min. Bodpfx Aoxbtqvsiheli CNC lathe | TRAUB - TNA 400 The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags:TNA400 | TNA-400

Condition: used, Year of construction: 1997, max. turning diameter 460 mm Max. Turning length 1.000 mm control System TX 8F max. Spindle speed 2.800 U/min. Bjdsxbtpxopfx Aiheli CNC lathe | TRAUB - TNA 500 The machine is in a well-maintained condition. The machine videos from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags:TNA500 | TNA-500

Condition: good (used), Year of construction: 2007, CNC Long Turning Lathe Manufacturer: Traub Machine Model: TNL 12 Control System: Traub Year of Manufacture: 2007 TECHNICAL DATA Headstock - Max. bar diameter (mm) 12.7 - Quality of round material (DIN 671) (mm) Ø Xh9 - Max. speed (rpm) 12,000 Max. turning length / headstock travel - with fixed guide bushing (mm) 130 - with rotating guide bushing (mm) 80 - with programmable guide bushing (mm) 80 Bledpfxjzgczbj Aihji C-axis resolution (degrees) 0.001 Rapid traverse Z1 (m/min) 30 Tool turret 1 - Slide travel X1 (mm) 35 - Slide travel Y1 (mm) 38 (-10 +28) - Rapid traverse X1 / Y1 (m/min) 15 - Chip-to-chip time (s) 0.3 Tool turret 2 - Slide travel X2 (mm) 35 - Slide travel Z2 (mm) 50 - Rapid traverse X2/Z2 (m/min) 15 - Chip-to-chip time (s) 0.3 Tool drive for tool turret 1 and 2 - Max. speed (rpm) 8,000 - Tools max. (number) 2xG - Clamping diameter for drilling tools (mm) 0.5-7 Counter spindle / front tool holder - Max. bar diameter (mm) 12.7 - Max. longitudinal travel 23, 24 / Xg (mm) 140 / 228 - Rapid traverse 23, 24 / X3 (m/min) 30 - Tool holders (number) 4 - Max. speed (rpm) 12,000 - C-axis resolution (GSP) (degrees) 0.001 Rear tool holder, driven / fixed - Z-axis travel with work spindle (mm) 80 - Tool holder diameter (mm) 20 - Tool holders (number) 3 Rear tool holder (X4 axis) - X4-axis travel (mm) 39 - Rapid traverse speed (m/min) 15 - Tool holder diameter (mm) 28 - Tool holders (number) 4 Tool drive for rear tool holder (with X4 axis) - Max. speed (rpm) 10,000 - Driven tools max. (number) 4 - Clamping diameter for drilling tools - Driven (mm) 0.5 - 7 - Non-driven (mm) 0.5 - 10 Coolant system - Pump pressure, single-stage (bar) 3 - Tank capacity (l) 180 - Delivery rate (l/min) 40 EQUIPMENT FEATURES - Chip conveyor - Bar loader FMB Minimag 18 - High-pressure system - Fire extinguishing system Subject to change and errors in technical data and specifications.

Condition: used, Year of construction: 2001, turning diameter 340 mm turning length 750 mm control SYSTEM TX 8H spindle passage 80 mm swing over plan sled 530 mm greates pass round over bed 665 mm turning speed range - main spindle 3.150 min/-1 drive capacity - main spindle 22 kW number of tool places 12 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Two machines are available. Price per unit. Machine 1: - Images 1-5 - Operating hours approx. 55,790 h Bsdpfx Aijxwdw Eshjli Machine 2: - Images 6-10 - Operating hours approx. 54,347 h Technical Features & Accessories: - Y-axis - Accessory package with rigid and driven tool holders - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Year of construction: 1993, condition: ready for operation (used), A Traub CNC automatic lathe including a bar feeder and chip conveyor is offered. Max. bar diameter: 42mm, min./max. bar stock diameter: 12mm-42mm, turning diameter: 42mm, turning length: approx. 250mm, max. speed: 4000rpm, main spindle stroke: 100mm, main spindle feed force: 1600N, number of cutoff slides: 4, X-axis slide stroke: 60mm, cutoff slide working stroke: 33mm, cutoff slide feed force: 4kN, cutoff slide rapid traverse: 15m/min, cutoff slide feed rate: 2.5m/min, slide dimensions X/Y: 112mm/320mm, guide width: 30mm, turret slide X/Z-axis: approx. 80mm/245mm, rapid traverse X/Z: 15m/min/15m/min, feed force X/Z: approx. 3200N/9000N, tool stations: 8, tool holder diameter: 25.4mm, max. turret indexing time: approx. 0.9s, remnant part dimensions X/Y: 42mm/240mm, max. workpiece dimensions for back-side machining X/Y: 42mm/100mm, longitudinal stroke for back-side machining: approx. 115mm, max. back-side machining speed: 5600rpm, back-side machining torque: 18Nm, drilling/thread cutting station clamping range: 1mm-16mm, max. Q-axis working stroke: 25mm, max. drilling spindle speed: approx. 3500rpm, max. thread cutting spindle speed: approx. 1000rpm, weight: 3200kg, machine dimensions: approx. 2500mm/1120mm/1620mm. Inspection by appointment possible. Bjdpfxozipg No Aihjli

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, spindle speed (max.): 5,600 rpm, travel distance X-axis: 140 mm, travel distance Z-axis: 520 mm, spindle motor power: 18,500 W, type of input current: three-phase, overall weight: 5,600 kg, bar passage: 42 mm, input current: 85 A, number of tool turrets: 2, number of tool stations in tool turret 1: 14, number of driven tool stations in tool turret 1: 14, number of tool stations in tool turret 2: 14, number of driven tool stations in tool turret 2: 14, CNC Lathe TRAUB TNC 42/65 TECHNICAL CHARACTERISTICS: Year of manufacturing: 2009 CNC control: TRAUB TX8i Number of axes: 8 Stroke Y axis: +/- 35 [mm] Stroke Z1 axis: 450 [mm] Stroke X1 axis: 140 [mm] Stroke Z2 axis: 520 [mm] Stroke X2 axis: 140 [mm] Stroke E axis: 450 [mm] Spindle throughbore: 42 [mm] Max. spindle speed: 5600 [rpm] Increment C-axis: 0.001 [°] Spindle power: 18.5 [kW] Counter spindle throughbore: 42 [mm] Max. counter spindle speed: 5600 [rpm] Counter spindle increment C-axis: 0.001 [°] Counter spindle power: 11 [kW] Type of tool holders: VDI 30 Number of tool stations - Turret 1: 14 Number of tool stations driven - Turret 1: 14 Blsdpfx Ajzh D Aisihei Max. speed driven tools - Turret 1: 4000 [rpm] Number of tool stations - Turret 2: 14 Number of tool stations driven - Turret 2: 14 Max. speed driven tools - Turret 2: 4000 [rpm] Total power required: 107 [kVA] Rated current: 85 [A] Supply voltage: 400 [V] Weight: 5600 [Kg] INCLUDED EQUIPMENT: x1 Set of collets x1 Set of tool holders x1 Chip conveyor x1 IRCO PROFIMAT ECO 42.6 bar feeder x1 KNOLL coolant system Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine tool similar to turning and milling centers, machining centers and milling machines, including brands such as Schaublin, Index, Mori Seiki, Traub, Tsugami, Star, Tornos, Biglia, Nakamura, Miyano, DMG and Mazak. CNC lathe, CNC turning center, CNC turning machine, machining center, CNC milling machine, CNC machining center, Fanuc, iTNC, TNC, Heidenhain, Mori Seiki, Mazak, Hurco, Nakamura, Takamura, Hardinge.

Condition: ready for operation (used), Traub 700 734 VEMEM/I interface board, used, in good condition, 100% functional, scope of delivery as per photos. Blodsx Eu Tvopfx Aihsi

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 400 mm turning dia. over face-slide: 250 - 300 mm turning length: 450 mm longitudinal traverse (z-axis): 450 mm facing movement (x-axis): 210 mm control: TX8H spindle passage: 65 mm Bsdozguk Ispfx Aiholi revolution per minute: 5.000 U/min feed:: 0,001 - 5.000 mm/min. tool turret - number of stations: 12 operating hours - idle run: - h operating pressure: 6 bar total power requirement: 36 kW Weight approx.: 8 t dimension machine xH: 3,0 x 1,8 x 2,0 m dimensions of hydaulic: 0,8 x 0,6 x 1,2 mm

Year of construction: 2002, condition: ready for operation (used), A relatively lightly used Traub CNC universal lathe is available. Spindle bore: 82mm, max. chuck diameter: 315mm, turning length: 750mm, X/Z travel: 360mm/750mm, Z-axis travel: +/-60mm, rapid traverse: 20m/min. Machine dimensions X/Y/Z: approx. 3250mm/1900mm/2300mm, weight: approx. 7800kg, operating hours: approx. 21812h. Documentation available. An on-site inspection is possible. The image is for reference only. Bsdpfx Aijzhnrnjholi

Condition: ready for operation (used), Year of construction: 2012, operating hours: 19,295 h, spindle motor power: 10,700 W, spindle speed (max.): 8,000 rpm, overall weight: 6,000 kg, total width: 2,500 mm, total height: 2,600 mm, bar diameter (max.): 32 mm, travel distance X-axis: 140 mm, controller manufacturer: TRAUB, controller model: TX 8i-p, product length (max.): 4,500 mm, number of axes: 7, This 7-axis TRAUB TNL 32 P was manufactured in 2012. It features a maximum bar diameter of 32 mm and a maximum Z-axis travel of 305 mm. The machine includes two turrets with live tooling capabilities, offering 10 and 9 tool stations respectively. If you are looking to get high-quality turning capabilities, consider the TRAUB TNL 32 P swiss type turning machine we have for sale. Contact us for further details. • Number of Turrets: 2 • Maximum Z-Axis Travel: 305 mm • Main Spindle Torque: 21 / 32 Nm • Main Spindle C-Axis Resolution: 0.001° • Turret 1 Tool Stations: 10 • Turret 1 Live Tool Stations: 10 • Turret 1 Live Tool Speed: 12,000 rpm • Turret 1 Live Tool Power: 1.5 / 2.5 kW • Turret 1 Tool Holder Diameter: 45 mm • Turret 1 Turning Tool Shank: 16 x 16 mm • Turret 1 X-Axis Travel: 140 mm • Turret 1 Z-Axis Travel: 305 mm • Turret 1 H-Axis Resolution: 0.001° • Turret 1 Chip-to-Chip Time: 0.3 sec • Turret 2 Tool Stations: 9 • Turret 2 Live Tool Stations: 9 • Turret 2 Live Tool Speed: 12,000 rpm • Turret 2 Live Tool Power: 1.5 / 2.5 kW • Turret 2 Tool Holder Diameter: 45 mm • Turret 2 Turning Tool Shank: 16 x 16 mm • Turret 2 X-Axis Travel: 140 mm • Turret 2 Y-Axis Travel: -25 / +40 mm • Turret 2 Z-Axis Travel: 320 mm • Turret 2 Chip-to-Chip Time: 0.3 sec • Counter Spindle Speed: 8,000 rpm • Counter Spindle Power: 1.5 / 2.5 kW • Counter Spindle Torque: 4.5 / 7.7 Nm • Counter Spindle C-Axis Resolution: 0.001° • Maximum Clamping Length: 250 mm Bljdpszcyhxsfx Aihji • Maximum Bar Diameter (Counter Spindle): 32 mm • Back Working Tool Stations: 8 • Back Working Live Tool Stations: 3 • Back Working Live Tool Speed: 12,000 rpm • Back Working Live Tool Power: 1.5 / 2.5 kW • Back Working Tool Holder Diameter: 36 mm • Rapid Traverse (X / Y / Z): 20 / 20 / 20 m/min • Maximum Feed Rate: 20,000 mm/min • Total Power Requirement: 46 kW • Space Requirement incl. Bar Feeder: 8,000 x 2,500 x 2,600 mm • Chip Conveyor: Optional, not included • Coolant System: Yes • Tool Turrets: 2 • Back Working Unit: Yes • Bar Feeder Interface: Yes • Bar Feeder: LNS Hydrobar Express 332 S2 / 3 m • Electronic Handwheel: Yes • Hydraulic Unit: YesMachine defects: The counter spindle is currently unusable due to prolonged inactivity. Either the sensor or the motor is defective. Technical Specification Counter Spindle Yes Driven Tools Yes Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2017, operating hours: 19,295 h, spindle speed (max.): 8,000 rpm, bar diameter (max.): 32 mm, controller manufacturer: TRAUB, controller model: TX8i-s, number of axes: 9, This 9-axis TRAUB TNL32-9 was manufactured in 2017. It features a main spindle speed of 8,000 rpm and a counter spindle speed of 6,400 rpm. The machine includes dual drive systems and a maximum bar capacity of 32 mm, making it suitable for various turning applications. If you are looking to get high-quality turning capabilities, consider the TRAUB TNL32-9 swiss type turning machine we have for sale. Contact us for further details. • Main Spindle: Motor Spindle Bljdpfxszcyabo Aihoi • Main Spindle Bore: 32 mm • Main Spindle C-Axis: Yes • Counter Spindle Bore: 30 mm • Counter Spindle Speed: 6,400 rpm • Upper Tool Carrier: X / Y / Z / H Axis • Lower Tool Carrier: X / Y / Z / H Axis • Tool Positions Upper Carrier: 10 • Tool Positions Lower Carrier: 10 • Dual Drive System: Yes • Long Turning Mode: Yes • Short Turning Mode: Yes • Changeover Turning Mode (W-T): Yes • Internal Coolant Pressure: 20 / 80 / 120 bar • Coolant System: Bürener ECO Fluid • Coolant Tank Capacity: 600 l • Oil Mist Extraction System: Yes • Air Flow Capacity: approx. 1,500 m³/h • Automatic CO₂ Fire Extinguishing System: Yes • Hydraulic Workpiece Gripper: Yes • Counter Spindle Parts Ejector: Yes • Parts Conveyor: Yes • Tool Monitoring System: Yes • Network Interface RJ45: Yes • Voltage: 400 V • Frequency: 50 Hz • Rated Power: 36 kW • Connected Load: 44 kVA • Rated Current: 63 A • Maximum Fuse Protection: 63 A • CE Marked: Yes • Bar Feeder: FMB LSK38 / 3200 C • Bar Diameter Range: 5 - 38 mm • Maximum Bar Length: 3,200 mm • Remnant Length Disposal: up to 600 mm • Feed Direction: Right Side • Material Support Position: Front • Chip Conveyor: Optional, not included Technical Specification Through-spindle Coolant Yes Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 1990, turning diameter 250 mm Bsdpfx Aet Hwq Dsiheli turning length 450 mm control TX8D bore 80 mm spindle speed: 3150 U/min. CNC Lathe with Bar Feed and 3 Turrets Very large spindle bore, with bar loading device Please ask for further details.

Condition: good (used), Year of construction: 1996, CNC turning center TRAUB Type:TNC65 DG Year 1996 Control TRAUB TX8F Bodpfxou Eug Io Aiholi With lots of accessories.

Condition: used, CNC turning machine TRAUB, Type TND 400 Serial No. 708, Year of manufacture 1996 CNC control TRAUB TX 8 F Nominal turning diameter: 400 mm Blsdpfx Aiozacwdjhei Swinging diameter over bed: max. 470 mm Spindle bore in draw tube: 65 mm Motor power, spindle drive: 22 kW Total power consumption: 35 kW Mains connection: 380 volts, 50 Hz - Electronic handwheel - RS 232 data interface - Turret with 12 tool positions, VDI 40 - Includes 8 tool holders, VDI 40 - 3-jaw chuck, Ø 225 mm, SMW Autoblok, Type KNCS-N-Ø 225-65 Includes a large quantity of chuck jaws - Hydraulic internal expanding cylinder, SMW, Type ZHDAS-130-67 - Chip conveyor, KNOLL, Type 200 S-1/600 - Coolant system - Hydraulic unit (L x W x H 650 x 500 x 1000 mm) Space requirement L x W x H: 4800 x 2000 x 2100 mm Space requirement, base machine L x W x H: 3500 x 2000 x 2100 mm Space requirement, chip conveyor L x W x H: 4500 x 700 x 1550 mm Weight: approx. 5 tons Good condition Machine is ready for demonstration. The internal expanding cylinder for workpiece clamping needs to be repaired.

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 9 - Number of turrets : 2 MAIN SPINDLE - Spindle power : 6.7 / 10.7 [kW] - Spindle speeds : 8000 [rpm] - Max. bar diameter : 32 [mm] - Z stroke : 305 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle power : 3.7 / 5.5 [kW] - Spindle speeds : 6400 [rpm] - Max. bar diameter : 30 [mm] - C axis indexing precision : 0.001 [°] - X stroke : 140 [mm] - Z stroke : 300 [mm] TURRET 1 - Number of positions : 10 - Number of motorized positions : 10 - Live tools speed : 12 000 [rpm] - Live tools power : 3.4 [kW] - X/Z stroke : 140/300 [mm] - Y stroke : -40/+25 [mm] TURRET 2 - Number of positions : 10 - Number of motorized positions : 10 - Live tools speed : 12 000 [rpm] - Live tools power : 3.4 [kW] - X/Z stroke : 140/320 [mm] - Y stroke : -25/+40 [mm] POWER SUPPLY - Total installed power : 28 [kW] WEIGHT & DIMENSIONS - Machine floor space : 3870 x 1670 [mm] - Machine height : 2500 [mm] Bljdpfjypxqrjx Aihei - Machine weight : 6000 [kg] MACHINE HOURS - Number of hours under power : 23240 [h] - Number of working hours : 19500 [h] EQUIPMENT - CNC : Traub TX 8i-p - 3 colors status lamp - Coolant tank : 500 [l] * with high-pressure pump : 3,8,20 [bars] * with paper filtering unit - Chips conveyor - Parts catcher - Parts conveying strip - Predisposition for barfeeder