Used Bead Mill Molteni Ms.15 for sale (25,751)

Year of construction: 2024, condition: new, - 8000 mm standad length - 800 mm roller width - 1,5 KW Gearbox rollerconveyor - 0,75 KW Gearbox cross transport Rjdobu Sb Dopfx Ai Heu

Year of construction: 2024, condition: new, Log cross conveyor - Number of chain strands according to customer specifications Redpfx Ashmp Iboi Heu - length and width according to customer specifications - powerful SEW gear motors - solid pin conveyor chain with gentle rollers

Year of construction: 2024, condition: new, - Chopping height 240 mm - chopping width 540 mm - chopping length approx. 25-35 mm - Number of chopping knives 2 - rotor diameter 600 mm - rotor speed 590 rpm Rsdpsnyidbofx Ai Hsu - feed motors 4 + 3 KW - main motor 45 KW / 55KW / 75 KW - 6.000 mm infeed conveyor belt - 2.000 mm conveyor belt underneath the machine

Year of construction: 2024, condition: new, max. cutting height - ø 340 mm min./max. cutting width 80 - 250 mm min./max. side board 18 - 80 mm max. cutting length 6.000 mm feed rate 5 - 30 m/min. sawing motor 2 x 55 kW feed motor 4,0 kW width adjustment motor 0,55 kW infeed roller motor 0,75 kW weight 8,000 Optional equipment Laser adjustment Infeed table extension up to 8.000 mm Automatic width adjustment with 6 fixed dimensions Rsdpfxsu Izks Ai Hsu Equipment with 1.000 mm dia. blades Motorized log turning device Electronic braking device

Year of construction: 2024, condition: new, max. cutting height 160 mm max. cutting width 600 mm min./max. trimming width 25-300 mm adjustment times of the widths 0,2-1,0 sec. feed rate 5-30 (70) m/min. sawing motor 37 kW (also more kW possible) feed motor 2,2 kW saw shaft diameter 70 mm weight 3.500 kg Basic equipment 1 adjusting bush 1 fixed bush Rsdpeu I D Dsfx Ai Hou Digital cutting width display Automatic cutting width adjustment Optional equipment Electric height adjustment of the feed rollers Laser with adjustment device Driven roller gear Electronic braking device

Year of construction: 2024, condition: new, The plant is available immediately ! - suitable for log diameters from 10 cm up to 50 cm - suitable for 2 - 6 m log length - 4-strand infeed conveyor 6 m long - 4 - strand separator 2 m long - 4 - strand separator 2 m long - Conveyor with pin conveyor chain M 112 with gentle rollers Redpfx Aiegvu Als Hou - block conveyor with 2 inch chain and flights - Special carrier for low-noise transport - Measurement with 1 mm resolution - Measuring frame with additional heating and sunshield - Display of all operating states on a 17" monitor - Fully automatic sequence control - Various storage options and sorting criteria - 5 ejectors right/left via SEW gear motors with brake - Spacious heat-insulated control cabin - 4 monitoring cameras with flat screen - Control cabinet with all cables - Sorting criteria according to agreement

Year of construction: 2024, condition: new, - debarker with 3/3 feed rollers - infeed and centering table - min log diameter 100 mm - max log diameter 600 mm - min log length 2.000 mm Rodpfx Aiefvbphs Heu - 30 m/min feed speed - 5 pcs. changeable carbide knives - 37 KW Main Motor - 9,2 KW Gearbox inffed and centering table - 5,5 + 7,5 KW Gearbox feed rollers - 9.000 Kg weight

Year of construction: 2024, condition: new, 2.5 - 6 m Cutting length Rodpfjgp Su Esx Ai Hju - 120 - 450 mm max. cutting height - 80 -250 mm cutting width - infeed table with centering rollers - infeed table with log turning device - saw with 6 - fold width adjustment - draw-out bridge with 2 driven draw-out rollers - Pull-out bridge with 5 pairs of pressure rollers - 650 mm saw blade diameter - 2 x 37 KW saw motors below - 2 x 30 KW saw motors above - 6 saw cuts - 4 KW SEW feed gear motor - 5- 30 m/min stepless feed speed

Year of construction: 2024, condition: new, max. cutting length 3.000-8.000 mm min. cutting length 500 mm max. cutting height 80 - 140 mm stepless feed 10-30 m/min. saw motor power 4,0 - 7,5 kW feed motor 1.5 kW number of saw supports 2 - 6 weight 1.000 - 2.500 kg Rsdpfx Ajxfzlsi Heu

Year of construction: 2024, condition: new, - 340 mm Cutting height - 70-250 mm max. cutting width - 500 mm passage width - 6000 mm cutting length - 3-20 m/min Rodpfx Aie E Rg So Hju - 2 x 18,5 KW sawing motor - 1,1 KW feed motor - 0,25 KW width adjustment motor - 1300 Kg weight

Condition: used, mileage: 387,162 km, first registration: 11/2010, next inspection (TÜV): 03/2025, emission class: euro5, loading space length: 7,150 mm, loading space width: 2,480 mm, loading space height: 500 mm, Equipment: parking heater, Make MB Type 818 Vehicle type flatbed Power in kW/hp 130/177 First registered / TÜV 11/2010-03/25 Mileage reading 387162 Loading area 7.15x2.48x0.50m Tires 215/75 R17.5 Tread depth in mm 10/10-12/12/12/12 Axle type leaf/leaf Total weight 7490kg Empty weight 4545 Equipment transmission automatic / air conditioning / auxiliary heating / engine brake / cruise control / differential lock / 2x electric windows mirrors / As seen or offered, without additional services / accessories. Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We support you with export, preparing export documents, obtaining license plates, supplier declarations, etc.! The information provided in advertisements, on the Internet, price tags and images are non-binding descriptions and do not serve as guaranteed properties. The seller assumes no liability/guarantee for typing and data transmission errors. Listed equipment may need to be checked separately. Rjdpfx Astpzarji Hsu We expressly reserve the right to sell the item prior to sale, as we also offer this item on other portals. Accessory information without guarantee. Subject to changes, prior sale or errors. We offer and strongly recommend an inspection and inspection so that the buyer does not have any false ideas about the condition and suitability. Inspections and inspections are possible at any time by appointment and are expressly desired.

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 565 kg, fuel type: diesel, tank capacity: 38 l, color: beige, power: 12.06 kW (16.40 HP), output current: 21 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 11.6 kW (15.77 HP), nominal power (apparent): 15 kVA, continuous power: 10.4 kW (14.14 HP), continuous power (apparent): 13 kVA, total length: 1,850 mm, total width: 850 mm, total height: 900 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Perkins, type of cooling: water, AKSA AP 15 Perkins PRP output: 10.4 kW / 13 kVA ESP output: 11.6 kW / 14.5 kVA Engine: Perkins 403A-15G1 Emission level: Stage 2 Speed: 1,500 rpm Mechanical governor Operating voltage: 12 V Cooling: water-cooled Generator: Stamford or equivalent Voltage: 400/231 V Voltage regulator: AS540 Control panel: DSE 6120 – emergency automatic start Battery charger: 5 ampere Type: Canopy unit; weatherproof, soundproofed Emergency stop switch Radiator with mechanical fan Base frame construction with integrated fuel tank (38 L) and vibration dampers Coolant preheating Voltage and frequency regulation according to ISO 8528-5 Unit suitable for stationary use only Please note that, in accordance with the applicable EU regulation, these units are not approved for mobile use. The units are sold as B-stock. B-stock means the units may show cosmetic defects such as minor rust, or rust on the housing. These defects do not affect the functionality or performance of the units in any way. Rodpfx Aiowu Dbuj Heu By accepting this offer, you expressly acknowledge the described characteristics and the associated condition of the units.

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 22300 € 428.16 € 1550 mm 4.5 mm 4.5 mm 3.5 mm 4.5 mm 3.5 mm Rjdpfxjynmwdo Ai Hou 3.5 mm 2.5 mm 130 mm 130 mm 130 mm 5 m/min 3300 mm 1150 mm 1110 mm 2370 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT: overhead crane side supports NC control variable speed

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 650x1160x650 mm Weight 125 kg Total power requirement 3 kw Rsdsvz Hv Ajpfx Ai Hju

Condition: new, Year of construction: 2025, Laser source: 3kW Raycus Laser head: Raytools autofocus Control system: FSCUT 5000 A Loading of tubes up to 6400 mm long, unloading up to 4000 mm Positioning accuracy: ±0.05/1000 mm Acceleration: 1 m/s² Rsdpsi Arwlsfx Ai Heu Speed: 120 rpm Max. Positioning speed: 100 m/min Max. Max. weight of a pipe: 250 kg Pipe diameter: 15-230 mm Total machine size: 12728 × 3400 × 2450 mm

Year of construction: 1997, condition: ready for operation (used), Müller Martini cover feeder 1528, year of manufacture 1997 Rsdowvmqbopfx Ai Hju

Condition: repair required (used), Year of construction: 2019, functionality: fully functional, In operational condition: MAXMILL NVM1166 - HISION VMU1100 - HISION V180 Rodpfx Aisy Iyw Sj Hju

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, working width: 1,500 mm, sheet thickness (max.): 1 mm, TECHNICAL DETAILS Rodpfx Aex I Egrji Hou Sheet width: 1,500 mm Sheet thickness: 1.5 mm

Condition: excellent (used), Year of construction: 1998, Weishaupt L5 Z/D oil burner Rodpfsh Ibgpjx Ai Hsu Output: 15-100kg/h Year: 1998-2006 Several available Viewing by telephone only! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller accepts no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible

Condition: used, 7001481, 20 ADVANCED, MS Ultrasonic, Ultrasonic Generator Rodpfot Txayox Ai Hsu Model: 7001481 Type: 20 ADVANCED Condition: Used

Condition: used, 619569.0, 35-40 ADVANCED, MS Ultrasonic, ultrasonic generator Redpfst Txbdjx Ai Hju Model: 619569.0 Type: 35-40 ADVANCED Condition: Used

Condition: used, 612435.1, 20 ADVANCED, MS Ultrasonic, Ultrasonic Generator Model: 612435.1 Type: 20 ADVANCED Condition: Used Rodpfx Aiet Tw She Hou

Condition: new, Year of construction: 2023, Hammer Mill with electrical box and cyclone filter for sale. The machines has a CE certificate. Technical parameters: Electric motor power: 45Kw Capacity: 1500-2000kg/hour Rjdpfx Aisxf Nw He Hju Machine size: 1750mmx900mmx1550mm. Weight 1300kg. Located Locally in Hungary (EU)

Condition: new, functionality: fully functional, grinding length: 304 mm, grinding width: 152 mm, Surface Grinder MSG 1530 BERNARDO Compact surface grinder: longitudinal, cross, and vertical feeds are all completely manual. Low-vibration spindle operation thanks to the use of high-quality special bearings. Indispensable for machining smaller parts and in fast grinding processes. Longitudinal table movement via a combination of V-guide and flat guide; cross table travel and vertical wheel feed are handled by dovetail guides. Central manual lubrication for all guides. All main components, such as the column, base, and slideways, are made from high-quality cast iron. Technical Specifications Table clamping surface width: 304 mm Table clamping surface depth: 152 mm Longitudinal travel (X): 340 mm Cross travel (Y): 170 mm Max. spindle axis to table distance: 210 mm Max. table load: 30 kg Grinding wheel size: 180 x 13 x 31.75 mm Grinding spindle speed: 2800 rpm Rjdpeyt Hycofx Ai Hsu Grinding spindle motor power: 0.55 kW Voltage: 230 V Dimensions (width): 1100 mm Dimensions (depth): 760 mm Dimensions (height): 880 mm Weight approx.: 210 kg Cross feed (Y) Manual cross feed: 2.54 mm/rev. Handwheel graduation (Y): 0.02 mm Vertical feed (Z) Manual vertical feed: 1.25 mm/rev. Handwheel graduation (Z): 0.025 mm Scope of delivery Basic tools Permanent magnetic chuck Grinding wheel flange Grinding wheel Legally required safety guards Complete DTR (technical documentation) in Polish CE certificate 24-month warranty for all, at no extra charge

Condition: good (used), Year of construction: 2021, S015464 Redpfxsyh Rx Nj Ai Hju MANUFACTURER: MARK MODEL: MSM 15 SERIAL NO.: ITJ514259 YEAR: 2021 POWER (kW): 15 CAPACITY (m³/min): 1.68 PRESSURE (bar): 10 OPERATING HOURS (LOAD/TOTAL): 948/1868 FREQUENCY INVERTER: no BUILT-IN DRYER: no