Used Beer Drive for sale (22,538)

Condition: ready for operation (used), spindle bore: 56 mm, turning diameter: 360 mm, center height: 180 mm, WEILER Commodor B incl. 3-axis digital display Heidenhain -GS identification -3-axis digital readout / Heidenhain -Year of manufacture: 1991 -Center height: 180 mm -Swing diameter over bed: 330 mm -Distance between centers: 1000 mm -Spindle bore: 56 mm -Spindle speeds: 25-2000 rpm -Automatic longitudinal / cross feeds -Thread cutting / Metric / Inch / Module etc. Knsdpfey Ak S Ajx Aqijb -Multifix tool post with inserts -Chuck guard -2x Emergency stop -3-jaw chuck -Chip guard/rear wall -Very well maintained condition -Machine feet -Documentation Dimensions: LxWxH 2.3x1.2x1.6 meters / Weight 1600 kg Errors / omissions excepted.

Condition: refurbished (used), hydraulic feed drive unit, fully reconditioned, stepless variable; Kedpfx Aqjirmuljienb 1 unit for KME 2 or BM - right execution - without additional pump - type 56-009

Condition: used, Year of construction: 2012, functionality: fully functional, Control system: Matrix II Travel ranges: X-axis 207 mm X2-axis 141 mm Y-axis 100 mm Y2-axis 70 mm Z-axis 760 mm Z2-axis 815 mm Main spindle: Drive power 22 kW Max. spindle speed 5,000 rpm Spindle nose A2-6 Counter spindle: Drive power 22 kW Ksdjz Dtmgepfx Aqijnb Max. spindle speed 5,000 rpm Spindle nose A2-6 Tool turret: Number of tool positions 24 Max. speed of driven tools 6,000 rpm Tool stations 24 Driven tool stations 24 2 pcs. 12-position turret Max. turning diameter: Max. turning diameter (upper turret) 344 mm Max. turning diameter (lower turret) 210 mm Max. swing diameter: Max. swing diameter (upper turret) 370 mm Max. swing diameter (lower turret) 320 mm Additional equipment: Bar feeder LNS Robot interface Automatic door Tool setter on the right and left Chip conveyor, discharge to the right Separate coolant system 15 bar high-pressure pumps Coolant temperature control

Year of construction: 2022, operating hours: 1,500 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 0070, We are selling a virtually new vertical universal brush tufting machine. The machine was manufactured by WOMAtec in 2022 and has seen very little use. Technical specifications: Type: DANY 1.0 Stroke: 70 mm Filament length: max. 150 mm Filaments: synthetic, bristles, and natural fibers, wire filaments and abrasive filaments Filament box: 1 color, needle dividing system Tufting tool: none Performance: approx. 100 cycles per minute Operating mode: intermittent operation and continuous operation Operation via foot switch Ksdpfx Aqszzwxwjisnb Consisting of: ■ solid, welded steel frame ■ powerful main drive ■ wire spool and wire feed ■ filament box with pressure plate ■ durable tufting tool ■ loop tufting system with needle divider ■ adjustable table for flat brushes Table for cup or roller brushes available upon request ■ painted in Prussian blue RAL 5010, light gray RAL 7035

Condition: used, Renishaw RMP600 3D probe, SK40, including case Knodpfx Ajy Dibfjqisb Condition: used (functional)

Condition: good (used), Year of construction: 2007, operating hours: 4,800 h, KOMATSU FG40T-7, triple mast, 4500 mm lift height, side shift, LPG, 4800 hours, 2007. A video can be sent via WhatsApp. We have a continuous stock; please see our website. Prices are quoted ex-Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices, in AS-IS condition, without guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always available. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland Kodpez Da Ttofx Aqienb

Condition: good (used), SNDKC 113-03247 / K49 Area of application: Drive technology / e.g. Lisec devices, etc. Kjdpoypkxhefx Aqionb Width: 65 mm Height: 430 mm Depth: 255 mm Weight: 5450 g Condition: Good, second-hand

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit Knsdpfx Aqoz Agv Usijb - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: used, Siemens 6SC6608-4AA00 control panel Knjdpfx Ajyl Abmoqieb The parts were removed from production facilities that were in operation until they were decommissioned. Condition: used (functional)

Year of construction: 2000, condition: ready for operation (used), Workpiece length: 700-2400mm, workpiece diameter: 50-200mm, main spindle drive power: 2x 37kW, max. chuck through-bore: 210mm, chuck piston stroke: 25mm, chuck stroke per jaw: 11.1mm, max. chuck actuating force: 52.5kN, max. chuck actuating pressure: 30bar, max. chuck speed: 2000/min, loading and unloading unit range: 2600mm, center clamping head travel: 1200mm, center clamping head stroke: 1200mm, main fuse: 315A, connected load: 150kW, overall length: approx. 10,640mm, main section length: 6800mm, width: 2370mm, height: 2860mm, overall height including superstructure: 3450mm, operating hours: 3143h. With chip conveyor, loading and unloading unit, fixed center clamping head, movable center clamping head, control panel, ILT air cleaner, electrical cabinet, hydraulic cabinet, coolant tank for motor cooling and coolant tank for tool cooling and documentation. Partially overhauled by the manufacturer in 2021. An on-site inspection is possible. Knodpsztdt Eefx Aqiob

Condition: used, Circular shears with motor drive FASTI Type 502 - 10 - 2 Machine no. No. 9252 009 Year of construction 1992 Material thickness max. 2 mm (400N/mm²) Maximum circular blank diameter 1000 mm Minimum blank diameter 100 mm Cutting shaft speed 60 and 120 rpm Cutting speed 12 and 24 m/min. Blade holder Ø 20 mm Knife diameter Ø 65 mm Projection of the clamping plate 720 mm Projection of the cutting wheel 280 mm Motor power 1.1 / 1.4 kW Mains connection 380 Volt, 50 Hz - 2 motor speeds - Mechanical clamping tip - Scale on the clamping bracket - electric foot switch - 1 set of cutting blades - Operating instructions with electrical diagram in PDF format Space requirement L x W x H 1600 x 660 x 1350 mm Kjdpfx Aqou Rimmsienb weight 320 kg good condition

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available. Knjdpfxsz Agw Eo Aqisb

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: Kedpfx Aqoz Ag Rrsienb - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: used, manufacture Siemens Sirius type 3TK2821-1CB30 We offer: 80 safety switching devices Manufacturer: Siemens Sirius Type: 3TK2821-1CB30 Condition: Good used condition. Fully functional prior to removal. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, Kjdpfjzu A Spex Aqienb and prior sale.

Condition: used, Year of construction: 2005, FANUC Series Type: 160i-MB A02B-0281-B803 Welcome to the FANUC Series 160i-MB, Type A02B-0281-B803 – a top-quality product made in Japan, manufactured in 2005. This CNC control unit represents the advanced technology and reliability for which FANUC is renowned. It is the ideal choice for precision applications in manufacturing and automation. Knjdsyn R Uaepfx Aqijb The FANUC Series 160i-MB delivers outstanding performance and versatility to meet the demands of challenging production environments. With its robust construction and advanced features, it enables precise control of machine tools and robots. As a product from Japan, a world leader in technology and quality, the FANUC Series 160i-MB stands for the highest standards in design and manufacturing. Every detail has been developed with the utmost care to ensure premium performance and durability. Experience the exceptional precision and performance of the FANUC Series 160i-MB and take your manufacturing processes to the next level. Discover the future of CNC control technology with this exemplary product from 2005, which continues to set standards even today.

Condition: used, mileage: 20,900 km, power: 60 kW (81.58 HP), first registration: 09/2020, fuel type: electric, next inspection (TÜV): 09/2026, color: black, gearing type: automatic, emission class: euro6, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, second-hand vehicle warranty, 1st hand, 12-month warranty, single-speed gearbox * 12-volt socket * 38.1 cm (15") steel wheels with hubcaps * 4.6 kW onboard charger * 5AL electric motor * ABS (anti-lock braking system) * Airbags * Active brake assist * Acoustic environment protection * Antenna integrated in fender * Exterior mirrors manual * Exterior mirrors with aspherical convex glass * Exterior mirror caps textured (black) * Outside temperature display with frost warning * BATTERY 017KWH * BATTERY INDEX 1000 * BATTERY TYPE BT6BE1 * WATER-COOLED BATTERY * Model series 453 * Owner's manual and service book – German * Front passenger seat with through-loading function * Hill start assist * Brake assist * Glasses compartment for driver and front passenger * COC paper EU6 – with registration certificate part II * Cool & Audio package * Crash sensor for hazard light activation * German specification * Three-point seat belts * Third brake light * Drive lock – automatic door locking when driving * Simple electric window opener without comfort function or anti-pinch protection * Electric power steering * Electric specification (for body shell) * ELECTRO-DRIVE * Electronic architecture T4VS * ESP® – Electronic Stability Program * Driver's airbag * Direction indicators with comfort tip function Kedpfxoy Hm N Se Aqienb * Vehicles with 4x2 drive * Pedestrian impact protection front and side * All-season tires * Privacy glass (dark tinted) * Seat belt warning function * H4 halogen headlights * Open glove compartment * Rear window * Rear window wiper with interval function * Rear spoiler * Heating element for electric vehicles * Displacement 2275cc (dummy for e-motor) * i-Size child seat anchorage * Interior lighting * Instrument panel without insulation * Instrument panel black textured, door center panels in black fabric, accent parts in black * Interior storage without color * REFRIGERANT R1234YF * Automatic climate control * Kneebag * Instrument cluster with monochrome display * Comfort windscreen wipers with interval function * Communication module (2G/3G) * Plastic steering wheel * Radiator grille in body panel color * Charging cable for wallbox and public charging stations * Charging cable bag * LED daytime running lights * 3-spoke steering wheel design * Steering wheel without height adjustment * Headlamp range adjustment * MB-Mobilo with DSB and GGD * Mercedes-Benz / smart brand * Center console with roller cover * Zero emission for electric drive * Black fabric upholstery * Fabric upholstery * Tire pressure monitoring system (TPMS) * Leather gearshift knob * Crosswind assist * Side indicator lights * Service cover * Seat belt without height adjustment * Sidebags * Seat type 1 * Seat heating * smart audio system * smart road assistance * Sun visor with parking ticket holder * 15-inch steel wheels * Standard production vehicle * Remote key system frequency 433 MHZ * Odometer in kilometers * Cruise control * tridion safety cell * Door handles textured (black) * Interior door openers textured (black) * TRANSITION OF WORLD MANUFACTURER TO MERCEDES-BENZ AG * Full roof with black fabric covering * Windowbag * Central locking * Auxiliary instrument with battery charge and power display * Additional equipment for countries with mild temperatures

Condition: like new (used), functionality: fully functional, machine/vehicle number: 656377.1, overall weight: 170 kg, Nominal point diameter: 8mm Die depth: 1mm Dimension X: 0.90mm Dimension X min.: 0.8mm Dimension X max.: 0.95 Max. Pressing force: 55kN Deflection constant: 27.63 kN/mm Zero position: 95.8mm The clinching pliers from Tox Pressotechnik with servo drive have been specially developed for use in robot systems and offer a precise and efficient solution for joining sheet metal and materials. Kjdpfx Aqsu Tuqtoijnb With its modern servo drive technology, it enables a highly dynamic and controlled application that can be ideally integrated into automated processes. The pliers are characterized by their robust design and reliability, making them a durable and low-maintenance solution. Thanks to its flexibility and versatility, it is ideal for various industrial applications and helps to increase productivity and quality in manufacturing.

Condition: used, SIEMENS 6FC5447-0AA00-0AA1 SINUMERIK 810D VERSION A Kedjylz Tuopfx Aqijnb + SIEMENS 6FC5410-0AY03-1AA0 SINUMERIK 810D VERSION A

Condition: used, Mitsubishi FREQROL FR-SF-2-26K-TCG AC Spindle Controller / Spindle Drive For sale is a used Mitsubishi FREQROL FR-SF-2-26K-TCG AC Spindle Controller, removed from a MAZAK MULTIPLEX CNC turning center. The unit shows normal signs of use and handling consistent with its age and industrial application (see original photos). The Mitsubishi FREQROL FR-SF series is designed for precise spindle motor control in CNC machine tools, offering reliable performance in demanding industrial environments. Technical Specifications Manufacturer: Mitsubishi Electric Series: FREQROL Model: FR-SF-2-26K-TCG Type: AC Spindle Controller / Spindle Drive Voltage Class: 200 V Application: CNC machine tools, turning centers, machining centers, spindle motor control Origin Removed from: MAZAK MULTIPLEX CNC Turning Center Professionally dismantled Condition Used Normal cosmetic wear from industrial use Please refer to the photos for the exact condition Sold exactly as shown Functionality: Untested (or Fully functional when removed from service, if applicable) Scope of Supply 1 × Mitsubishi FREQROL FR-SF-2-26K-TCG AC Spindle Controller Only the items shown in the photos are included Note Kedpfezn Ak Eox Aqijnb This is a used industrial component and may show signs of wear due to previous use. The photographs are an integral part of the item description. Please verify the model and part number before purchasing to ensure compatibility with your machine.

Condition: used, FANUC A06B-6124-H109 Servo Amplifier Module Welcome to the Fanuc A06B-6124-H109 Servo Amplifier, a masterpiece of precision and performance. This servo amplifier is the ideal solution for industrial applications that require maximum accuracy and reliability. Developed by Fanuc, a global leader in CNC control technology, the A06B-6124-H109 stands for quality and innovation. With its impressive power and robust design, this servo amplifier is perfectly suited to meet the most demanding requirements of modern manufacturing environments. Its precise control and rapid response times ensure outstanding performance in various applications, from machine tool control to robotics. Discover the unparalleled precision and reliability of the Fanuc A06B-6124-H109 Servo Amplifier and take your industrial applications to a new level of performance. Knedpfx Aqoyn Sadjiob

Condition: used, FANUC A06B-6124-H109 Servo Amplifier Module Welcome to the Fanuc A06B-6124-H109 servo amplifier, a masterpiece of precision and performance. This servo amplifier is the ideal solution for industrial applications that demand the highest levels of accuracy and reliability. Developed by Fanuc, a global leader in CNC control technology, the A06B-6120-H075 stands for quality and innovation. With its impressive power output and robust design, this servo amplifier is perfectly suited to meet the most demanding requirements of modern manufacturing environments. Its precise control and fast response times ensure outstanding performance across a range of applications, from machine tool control to robotics. Experience the unmatched precision and reliability of the Fanuc A06B-6120-H075 servo amplifier and take your industrial applications to a new level of performance. Ksdpfx Aeyn Saqjqisnb

Condition: used, FANUC A06B-6044-H018 AC SPINDLE SERVO UNIT Condition: Used (functional) incl. 7-day functional warranty Kjdpfjyn Sb Isx Aqisnb

Condition: used, Tschudin HTG310 Universal Cylindrical Grinder Centre height: 100mm Knsdpfx Aqjzrt Ipjiob Distance between centres: 340mm (13.4") Maximum grinding diameter: 200mm Maximum grinding length: 340mm Hydraulic table traverse Table swivel: ±11° Wheelhead swivel: ±5° Workhead swivel: 360° Infinitely variable workhead spindle speed: 50–500 RPM Automatic plunge and traverse grinding cycles Automatic infeed with adjustable spark-out timer Rapid wheelhead advance and retract Hydrodynamic wheelhead bearings for exceptional accuracy Grinding wheel size: 350 x 50 x 127mm (14" x 2" x 5") Fitted With Hydraulic table drive Universal workhead Tailstock Coolant system Wheel guard Machine lighting

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Ksdjxwaz Hopfx Aqijnb

Condition: used, FANUC Knodpfx Aor Dgzveqieb A06B-6120-H075 Welcome to the Fanuc A06B-6120-H075 servo amplifier, a masterpiece of precision and performance. precision and performance. This servo drive is the ideal solution for industrial industrial applications that require the highest accuracy and reliability. and reliability. Developed by Fanuc, a global leader in CNC control technology CNC control technology, the A06B-6120-H075 stands for quality and innovation. With its impressive performance and robust design, this servo amplifier is this servo drive is perfectly suited to meet the most demanding requirements of modern modern manufacturing environments. Its precise control and fast response time ensure outstanding performance in various applications applications, from machine tool control to robotics. Discover the unrivaled precision and reliability of the Fanuc A06B- 6120-H075 servo drive and take your industrial applications to a new level of performance. a new level of performance.