Used Bernardo Mbs 400 Dg / 400 V for sale (45,155)

Condition: used, Year of construction: 1987, pressure 400 t table length 2500 mm table width 2000 mm Distance between columns 2000 mm Stroke 2600 mm Distance table/ram, stroke up 2500 mm Table surface area 2000 x 2500 mm Table height above floor 1120 mm Gsdpfx Asvuumisdcobp Ram surface 2000 x 2500 mm Side window 1500 mm max. capacity of swivelling ram plate 20 t Oil volume 1000 l Power capacity 48,0 kW Weight 85,0 t Dimensions (WxDxH) 8,6 x 5,3 x 8,2 m with swivelling ram, movable table, inclining table, ejector in table stored in dismantled condition - Video at seller's site before dismantling available

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 9,900 kg, maximum load weight: 14,100 kg, overall weight: 24,000 kg, axle configuration: > 3 axles, tire size: 235 / 75 r 17,5, Custom-tailored transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Further information Chassis Steel welded construction Turntable with robust ball bearing, storage box recessed Turntable extension Foldable rear support 2 wheel chocks with holder Aluminum side impact protection Mud flaps at the rear across the entire width Extendable wideners to 3,000 mm (not in rear slope) (However, the track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the center of the loading area Wooden planks 70 mm for widening to 3000 mm Tie-down eyes, low-loader type 3 pairs of tie-down points, each rated at 10 tons, integrated in the front of the floor 6 pairs of tie-down anchor plates, top and side in the outer frame, each rated at 10 tons 1 x in the neck area the rest distributed in between with a maximum distance of 1200 mm 1 x rear slope 5 pairs of pocket slots recessed in the outer frame, inside 70 x 40 mm, (can be converted to 5-ton ring tie-down eyes, not included in the scope of supply) Towing device, turntable trailer Tow bar with tested 40 mm towing eye Note! With a 40 mm towing eye, the permissible total weight of the truck must not exceed 18000 kg; otherwise, a 50 mm towing eye is required. Axles + Suspension SAF drum brake axles Axle / chassis laser-aligned, reducing tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization in the front and rear (rocker equalization) Wheels & Tires 235 / 75 R 17.5, according to manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be pulled by towing vehicles which guarantee the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front Gjdpfx Aoi Ri I Eedcsbp 2 white/red side marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connecting cable 1 LED rotating beacon with holder, switched via parking light (beacon can be removed) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front area: steel floor followed by 70 mm softwood floor, steel / diamond plate in the wheel arch area Rear slope with 70 mm softwood floor Access Ramps Steel ramps, 2800 mm long, 750 mm wide, laterally movable covered with wood with gas spring support Operating Instructions With an axle load of 10,000 kg, an exemption permit is required, only indivisible loads are possible!!! The stated total weight is technically possible; depending on the cargo, the total weight may not be reached while complying with the permissible axle / support and saddle loads. Country of Registration / Signs Country of Registration: Germany 1 with Dekra inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for license plate holder, two-line Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint finish Frame: RAL 3002 Carmine Red 10-year warranty against rust-through Tow bar: galv

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,500 kg, maximum load weight: 15,500 kg, overall weight: 24,000 kg, axle configuration: > 3 axles, loading space width: 2,520 mm, loading space height: 890 mm, total length: 11,940 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Further Information Low-loader trailer chassis Steel welded construction Turntable with heavy-duty ball bearing Foldable rear support 2 support wedges with holder Aluminum side impact protection Splash guards at the rear over the entire width Quarter panel fenders in front of the 1st axle Godpfx Aji Ri Izodcsbp Extendable widening elements to 3,000 mm (not in rear slope) (However, the track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the center of the loading area Wooden planks 70 mm for widening to 3000 mm Tie-down points for low-loader 1 pair of tie-down points on the gooseneck, each 5 tons 9 pairs of tie-down eyes embedded at the top and sides in the outer frame, each 10 tons 2 x at the front on the gooseneck 7 x in the low bed 6 pairs of tie-down holes in the outer frame of the low bed, each with 5 tons. (for securing lashing straps) Coupling device for trailer turntable Drawbar with tested 50 mm drawbar eye Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical incl. Axle load equalization at the front and rear (lever equalization) Wheels and tires 235 / 75 R 17.5 according to the manufacturer's choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air braking system Spring brake parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 1 LED warning light with holder, switched via side lights (light can be removed) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm 2 x 7-pin fail-safe plugs at the front, with connecting cable Floor Gooseneck at the front with steel/diamond plate thereafter with 70 mm softwood floor, in the wheel arch area steel/diamond plate Rear slope with 70 mm softwood floor Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally movable covered with wood Hydraulically operated via tractor's auxiliary drive with throttle, operation on the left side Hydraulic connection with quick-release coupling NW 10/3, incl. connecting hose Operating instructions At 10,000 kg axle load, an exemption permit is required, only indivisible loads are possible!!! The stated total weight is technically possible; depending on the cargo, the total weight may not be reached while observing the permissible axle/support and saddle loads. (Poor driving and handling behavior possible due to incorrect load distribution) Country of registration / Signs Country of registration: Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline included prepared for license plate holder, two-line Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Painting Frame DB 7350 Novagrau 10-year warranty against rusting Drawbar galva

Condition: excellent (used), mileage: 1,113,939 km, power: 294 kW (399.73 HP), first registration: 11/2008, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, total length: 5,800 mm, total width: 2,500 mm, total height: 3,500 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2008, Equipment: ABS, air conditioning, cruise control, electric window regulation, fridge, power assisted steering, spoiler, = Additional Options and Accessories = - Aluminum fuel tank - Roof spoiler - High beam headlights - Air conditioning - Air-suspended seats - Radio/CD player - Rear view camera - Sleeper cab - Sun visor - Immobilizer Gedpfxjzammps Adcjbp = Additional Information = Technical Information Number of cylinders: 6 Engine displacement: 12,780 cc Maximum front axle load: 8,000 kg Maximum rear axle load: 11,500 kg Weights Unladen weight: 7,795 kg Payload: 12,205 kg GVW: 20,000 kg Maintenance, History, and Condition APK (Technical Inspection): valid until 11/2026 Technical condition: very good Identification License plate: BV-NV-72

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 14,300 kg, maximum load weight: 9,700 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space width: 2,520 mm, loading space height: 900 mm, total length: 12,000 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Further Information Chassis Steel welded construction Turntable with robust ball bearing Foldable rear support 2 wheel chocks + holder Aluminum side underrun protection Splash guards at the rear over the entire width Quarter panel fenders in front of the 1st axle Excavator arm recess starting above the rear axles to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing points of 5 tons each in the excavator arm recess on the side of the longitudinal frame, approx. 300 mm from the front and approx. 200 mm in front of the rear slope 1 storage box recessed in the gooseneck in the floor with a lid, W=720 mm/ L=520 mm / D= 170 mm 1st pair of wheel recesses recessed in the gooseneck in the low-loader wheel well area, sloped for access, length at the bottom approx. 1600 mm, approx. 400 mm deep. Note! Frame in the main beam area is 400 mm higher than the wheel recess. 2nd pair of wheel recesses between the axles recessed in the low-loader in the wheel well area, sloped for access, length at the bottom approx. 600, approx. 300 mm deep. Note! Frame in the main beam area is 300 mm higher than the wheel recess. Wheel recess cover pull-out from the main frame, with wood inserts. Distance from the outer frame, beam to beam, approx. 1280 mm Extensions pull-out to 3,000 mm, foldable at the wheel recess extensions (extension not in the rear slope and not in the wheel recesses at the bottom) Storage compartment for wooden planks in the middle of the loading area or under the loading area, depending on technical feasibility Wooden planks 70 mm for extension to 3000 mm Lashing points, low-loader 1 pair of ring lashing points recessed at the front on the gooseneck, each 5 tons 8 pairs of lashing eyes at the top and on the side recessed in the outer frame, each 10 tons 2 x at the front on the gooseneck 6 x in the low-loader, the first lashing point 250 mm from the front and the last one max. 250 mm from the rear, the distance between the lashing points is no more than 1100 mm 5 pairs of ring lashing points recessed in the outer frame, each 5 tons (can be converted to stake pockets) Coupling system, trailer, turntable Drawbar with tested 50 mm drawbar eye with 8° inclined drawbar eye Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned, reducing tire wear and fuel consumption Air suspension with lifting and lowering valve, can be operated separately at the front and rear Wheels and tires 235/75R17.5 according to manufacturer's choice Steel rims in twin arrangement, factory silver Braking system Gedpfoi Ri I Nex Adcobp 2-line compressed air brake system Spring-loaded parking brake Trailer Info Center for displaying vehicle data such as axle load (no calibrated scale) and odometer Axle load detection via EBS-CAN bus signal, for display on the display in the cab, truck must be suitably prepared, no truck installation (no calibrated scale) Vehicle-driving stability system Duomatic connection at the front, with connecting cable to the towing vehicle EBS, Electronic Braking System with EBS plug at the front, with connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights in LED with resistor, yellow LED lighting on the side, license plat

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, overall weight: 24,000 kg, axle configuration: > 3 axles, loading space height: 900 mm, total length: 11,940 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Additional Information Low-bed semi-trailer chassis Steel welded construction Turntable with heavy-duty ball bearing ring Folding rear outriggers 2 support wedges with holder Aluminum side impact protection Rear splash guards covering the entire width Semi-fender for 1st and 2nd axles with anti-spray splash guards behind each axle, anti-spray splash guards in front of and behind the 3rd and 4th axles Excavator arm recess above the rear axles, extending to the rear, approximately 1800 mm long, approximately 650 mm wide and approximately 150 mm deep, 2 pairs of lashing points of 5 tons each in the excavator arm recess, laterally on the longitudinal frame, approximately 300 mm from the front and approximately 200 mm in front of the rear slope 1 plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock (lock not included) 1 storage box recessed in the gooseneck at the bottom with lid, W=720 mm/ L=520 mm / D= 170 mm Extendable widening elements to 3,000 mm (not in the rear slope) (However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Wooden planks 70 mm for widening to 3000 mm Storage compartment for wooden planks under the loading platform Lashing eyes for low-bed trailer (40 lashing options) 1 pair of lashing eyes on the gooseneck, each 5 tons Gbodpfxei Ri Dae Adcsp 9 pairs of lashing eyes embedded above and on the side in the outer frame, each 10 tons 2 x at the front on the gooseneck 7 x in the low bed 6 pairs of lashing eyes in the outer frame from the low bed, each 5 tons (for attaching tie-down straps) 3 pairs of folding lashing eyes additionally, each 10 tons 1 x inside next to the main frame at the beginning of the low bed 1 x on the gooseneck (protruding) 1 x behind the last axle, recessed in the floor Coupling device for the trailer turntable Drawbar with tested 50 mm drawbar eye, drawbar eye inclined by 8° / D-value min. 160 kN Axles + Suspension Drum brake axles Parabolic spring suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization at the front and rear (rocker equalization) Wheels and Tires 235 / 75 R 17.5 according to the manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connecting cable Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking lights (beacon removable) 2 pairs of warning signs double LED illuminated and extendable to 3,000 mm Floor Gooseneck at the front with steel / checkered plate covering followed by 70 mm softwood floor, wheel arch area with steel / checkered plate covering Rear slope with 70 mm softwood floor Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable covered with wood Hydraulically operated via towing vehicle auxiliary drive with throttle, operation on the left-hand side at the front Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Country of Registration / Signs Country of Registration: Germany 24/7 Service Hotline prepared for two-line license plate holder Contour marking with reflective strips ac

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 600 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 460 mm, total height: 2,770 mm, table load: 500 kg, overall weight: 5,200 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 30, tool weight: 8,000 g, number of axes: 4, This 4-axis MORI SEIKI SV-400 was manufactured in 1998. It features a table size of 900 × 500 mm and impressive travels of 600 mm in the X-axis, 430 mm in the Y-axis, and 460 mm in the Z-axis. The machine includes a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30 stations. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI SV-400 vertical machining centre we have for sale. Contact us for further details. • Table: 900 × 500 mm; 4 T-slots (18 mm width × 100 mm pitch) • Number of axes: 4 (X, Y, Z + 4th rotary axis; 4th axis supplied by accessory listed below) • Distance spindle nose to table: 150–610 mm • Spindle: max; 22 / 18.5 kW motor; 85 mm front bearing ID • Tool magazine: max tool Ø 80 mm (adjacent) / 125 mm (non-adjacent); max tool length 300 mm; chip-to-chip 3.2 s • Feedrates: Rapid X/Y/Z 32,000 mm/min; max working feed 16,000 mm/min • Axis motor power: X/Y 2.1 kW; Z 4.4 kW • CNC control: MORI-FANUC MSC-501 (compatible with MSC-518); memory 320 m; functions include helical interpolation and cutting force control (Power Monitor) • Coolant system: 50 bar high-pressure through-spindle coolant (TSC) • Features: air blow for part cleaning, full enclosure, end-of-cycle lamp, RS-232 interface • Floor space: 2,200 × 2,550 mm • Electrical: total installed power 50.2 kVA; 380 V, 50 Hz Additional equipment • 4th axis attachment: Tsudakoma RN-150R rotary table with 200 mm faceplate and tailstock Gedpoy Uxigjfx Adcsbp • Chip management: 2× rear-discharge chip conveyors Technical Specification Taper Size BT 40

Condition: used, Year of construction: 1999, TOPPER TMV 400APC year 1999 Table surface : 500 x 300 [mm] - Strokes X x Y x Z : 400 x 300 x 300 [mm]. - Max. weight on table : 200 [kg]. - Quick feeds : 30 [m/min]. - Work feeds : 1 to 10,000 [mm/min]. - Spindle type : BT30 - Spindle speed : 8.000 [Rpm] Gbsdpfouanwmjx Adcsp - Spindle power : 3,7 [kW] - Changer : 10 tools - Dimensions : 2900 x 1560 x 2335 [mm]. - Weight : 3.0 [t] fully working machine

Condition: used, Year of construction: 2015, functionality: fully functional, High-precision strip feeder manufactured by Zehnder & Sommer, Germany, designed for accurate and reliable feeding of metal strip in stamping, punching, and forming applications. This feeder is ideal for integration with high-speed presses such as Bruderer, Schaal, Mabu, Bihler, and similar machines. Zehnder & Sommer feeders are known for their exceptional Swiss engineering, compact design, and excellent feeding accuracy, making them suitable for demanding industrial environments and high-speed production lines. Technical Specifications Manufacturer: Zehnder & Sommer Model: EVD 220 DG S Strip width max.: 200 mm Roll opening (max strip thickness): 4.0 mm Maximum material cross-section: 50 mm² Feed length range: 0 – 19,999 mm Feed accuracy: ± 0.1 mm Maximum feeding speed: 150 m/min Pulling force: 70 N Weight: 10 kg High precision feeding for stamping and forming applications Compact and lightweight industrial design Gjdpfxezav Rdj Adcjbp Suitable for high-speed press automation Reliable swiss manufacturing quality Easy integration into existing production lines Ideal for fine stamping, electrical components, and precision metal parts production

Condition: used, empty load weight: 10,680 kg, maximum load weight: 29,320 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 08/2011, next inspection (TÜV): 12/2026, loading space length: 10,500 mm, loading space width: 2,510 mm, loading space height: 970 mm, suspension: air, tire size: 245/70R17.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 4 axles, turntable, air suspension, ABS (anti-lock braking system), extendable to 3m, lashing rings, hydraulic ramps, rear support, twin tires, wheel recesses. Body: 4-axle low-loader trailer with hydraulic loading ramps, 4x 10t Gigant axles, drum brakes! Ramp length approx. 2850 mm! Loading height approx. 970 mm! Wheel recess height at the front approx. 600 mm, at the rear approx. 670 mm! Gsdpfexx A H Isx Adcsbp The trailer has received a new kingpin! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors! - .

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, saw blade diameter: 400 mm, cutting height (max.): 145 mm, cutting range round steel at 45°: 120 mm, type of input current: AC, Robust cold circular saw with pneumatic workpiece clamping Clamping, sawing, return to initial position, opening in automatic mode Stepless feed rate adjustment Minimum quantity lubrication system + coolant unit Saw blade diameter from 375 to 425 mm Mitre adjustment 45° - 90° - -45° - -30° Cutting capacity with saw blade diameter 400 mm: Flat: 210 x 120 mm Mitre cut: 145 x 120 mm Round: 140 mm diameter Mitre cut: 120 mm Godpfx Adoy Httdecebp Pole-changing three-phase motor for saw blade – circumferential speed 22 + 44 m/min Voltage: 400 V

Condition: used, Technical details: plate width: 400 mm max. stroke: 600 mm control: extern weight of the machine ca.: 0,4 t dimensions L x W x H: 2.7 x 0,8 x 0,62 m Hydraulic sheet feeder, belt feeder External control in combination with processing machine. -Insertion length approx. 800mm -Infeed height approx. 500mm -Motorized/hydraulic operation On sale as described. Godpfou Iczfsx Adcebp *

Condition: new, Year of construction: 2025, power: 400 kW (543.85 HP), motor manufacturer: Battery System: LIFePO4, General information Field of application: Construction Weights Empty weight: 12.000 kg Functional Generator capacity: 400 kVA Dimensions of cargo space: 465 x 230 x 250 cm CE mark: yes Other information Frequency: 50 Voltage: 400 Drill equipment: Tank, Control Panel Emission level: Stage V / Tier V Additional information Please contact Team DPX for more information = Additional options and accessories = Godsw A Ha Nopfx Adcebp - Control Panel - Tank

Condition: new, Year of construction: 2025, machine/vehicle number: 20250205012, Field of application: Construction Empty weight: 944 kg Generator capacity: 400 kVA Dimensions of cargo space: 124 x 64 x 85 cm CE mark: yes Frequency: 50 Gsdpfx Aowqkm Ajdcobp Voltage: 400 Production country: CN Please contact Team DPX for more information

Condition: new, Year of construction: 2026, machine/vehicle number: 20251017003, fuel type: diesel, motor manufacturer: Perkins 2206C-E13TAG2, General information Field of application: Construction Weights Empty weight: 4.550 kg Functional Generator capacity: 400 kVA Dimensions of cargo space: 416 x 160 x 215 cm CE mark: yes Other information Fuel consumption: 58 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A46H Gbedoyy Uafspfx Adcop Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 580 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Perkins 2206A-E13TAG2, General information Field of application: Construction Weights Empty weight: 4.575 kg Functional Generator capacity: 400 kVA Dimensions of cargo space: 493 x 166 x 215 cm CE mark: yes Other information Fuel consumption: 52.6 Liter / Hour at 75% Load Prime Generator: FG Wilson FG29A280 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 888 l Production country: CN Gbsdpfx Adoyz Sk Rjcop Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Perkins 2206A-E13TAG2, General information Field of application: Construction Weights Empty weight: 3.161 kg Functional Generator capacity: 400 kVA Dimensions of cargo space: 380 x 113 x 216 cm CE mark: yes Other information Fuel consumption: 52,6 L/Hour at 75% Load Prime Generator: FG Wilson FG29A280 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Water tank volume: 888 l Production country: CN Additional information Please contact Team DPX for more information Gjdpfx Adoxwhunecobp = Additional options and accessories = - Battery - Control Panel - Tank

Condition: used, maximum load weight: 28,450 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2017, loading space length: 13,350 mm, loading space width: 2,450 mm, loading space height: 2,690 mm, Equipment: ABS, -Thermo King SLXI 400 refrigeration unit -Swing doors -Tail lift Gbjdpfx Adeyzviqocsp Subject to errors, prior sale, and typographical mistakes. Sale only to businesses and for export.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,965 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH ROTO-PALLET X-AXIS TRAVEL: 560 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 570 mm DISTANCE SPINDLE NOSE-TABLE: 210 - 780 mm RAPID FEEDS X-Y-Z: 40 - 40 - 32 m/min SPINDLE: 80-10000 rpm; 15-18,5 kW; ISO 40 - BT PALLET: N.2 ; 712X475 mm MAX ADMITTED LOAD: 300X2 Kg HIGH PRESSURE COOLANT: 15 Bar Gbodpoq Nqkxofx Adcsp TOOL MAGAZINE: CHAIN-TYPE ; 32 POS MAX TOOL DIAMETER: 90(150) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC 21i - MB WEIGHT: 7600 Kg OVERALL DIMENSIONS: 3010 x 3450 x 3145 mm

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Behringer Eisele VMS 400 A metal circular saw for processing almost all steel qualities. Integrated coolant unit and micro-spraying system, selectable in the control system as required Hydraulic saw feed and quick clamping vice with clamping pressure reduction NC control with graphic display and keypad 3 selectable operating modes (manual mode, series and single cuts) Convenient stroke adjustment of the saw unit via clamping lever Can be combined with infeed and outfeed roller conveyors Manufacturer: Behringer Eisele Type: VMS 400 A metal circular saw Year: 2013 Condition: used, very good Flat 90 ° [mm] 200 x 120 Flat 45 ° [mm] 140 x 120 Flat 30 ° [mm] 100 x 100 Square 90 ° [mm] 120 Square 45 ° [mm] 120 Square 30 ° [mm] 100 Round 90 ° [mm] 140 Gedpfsy S Eygjx Adcjbp Round 45 ° [mm] 140 Round 30 ° [mm] 110 Feed length 800 mm Drive power 2.0 / 2.6 kW Speeds 8 / 16 / 32 / 64 min-1 Saw blade diameter 400 mm Saw blade feed hydraulic Material feed ball screw Hydraulic clamping device Minimum quantity lubrication Chip clearing brush Length 3,100 mm Width 1,500 mm Height 2,000 mm Weight 1,350 kg Material support height 920 mm Scope of delivery: Documentation 4x saw blades 1x feed roller conveyor 2m

Condition: used, mileage: 98,263 km, power: 63 kW (85.66 HP), first registration: 12/1982, overall weight: 5,000 kg, fuel type: diesel, color: blue, gearing type: mechanical, loading space width: 2,000 mm, loading space length: 4,050 mm, loading space height: 1,900 mm, Year of construction: 1982, total length: 6,075 mm, total width: 2,120 mm, total height: 2,730 mm, number of seats: 2, Very clean 'Düdo' as a 508 D flatbed with tarpaulin, 100% original – freshly restored and newly painted in RAL 5329. From second ownership: 1st owner was an authority / state police, then privately owned and returned to us due to health reasons. Equipment: 2-seater, radio, fog lights, ring-type trailer hitch 3.5t The 3.8l diesel engine runs perfectly, Vmax = 96 km/h, also plenty of torque on inclines. No pending repairs – ready to drive immediately, fully equipped with side-impact and underrun protection. All 6 tires are new, the exhaust system, silencer, and tailpipe are new. We have then thoroughly and professionally refurbished the vehicle: Driver's cab disassembled, partially welded, and professionally repainted in RAL 5329. The 508 was originally green (RAL 6029). We have also brush-cleaned the chassis and all rims, repainted in several coats, followed by preservation with protective wax. Recent inspection performed at our workshop: - Engine oil and brake fluid changed, all lubrication points serviced - Engine sealed: crankshaft oil seal replaced, radiator removed and reinstalled, coolant renewed - Wheel brake cylinders front and rear renewed, both starter batteries replaced Some of the tension straps on the tarpaulin have been renewed. The entire process took around 120 hours. New general inspection (HU/AU) with Classic Car Certificate (H registration) upon delivery. Included: 2 spare wheels (for rims) and a tow bar. Godpfx Aoxp Tkljdcobp Flatbed dimensions: 4050 x 2000 x 1900 mm (L x W x H) +++ Subject to change, prior sale, and errors +++ + BP 581 H+

Condition: new, width of the strips 200 mm band length 1490 mm Gbjdpexaapvofx Adcjp band speed 8.0 m/sec motor 400 Volt loading area 500 x 280 mm total power requirement 1.5 kW Dimensions (HxWxD) 750 x 600 x 340 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: new, width of the strips 100 mm band length 920 mm band speed 7.0 m/sec loading area 300 x 150 mm motor 0.44 KW motor 400 Volt range L-W-H 470 x 370 x 210 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander Gbjdpfxexaappe Adcsp - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: new, Equipment: CE marking, documentation/manual, - Semi-automatic - Hydraulic - Infinitely adjustable band saw speed - Double miter - Hydraulic clamping of the miter setting - Hydraulically adjustable sawing pressure - Fully hydraulic material clamping - Hydraulically adjustable clamping pressure - Cooling system - Automatic switch-off Gbsdpfx Adjvkkl Tjcsp - Automatic switch-off of the machine at open cover, torn belt, reduced belt tension - Emergency stop - Documentation - 400V

Condition: excellent (used), Year of construction: 2017, 407 USED Treif Bread Slicer. TECHNICAL DATA: - 380V power supply. EXTERNAL DIMENSIONS (in cm): - height 112 cm - width 90 cm Gjdpezf N A Nsfx Adcobp - length 80 cm.