Used Bezel Bottom for sale (2,798)

Condition: used, cooking length 4.000 mm belt width 800 mm all stainless steel suitable for steam heating temperature measurement 4 zones steam injection per zone (4 zones) Njdey D Ixpopfx Anfowf air circulation per zone from bottom to top through the belt dimensions (l x w x h) : ± 6.200 x 1.700 x 2.200 mm adjustable speed

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Nsdpfsh U Rzgsx Anfswf Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: used, functionality: fully functional, mileage: 354,185 km, power: 353 kW (479.95 HP), first registration: 08/2023, fuel type: diesel, overall weight: 8,088 kg, axle configuration: 4x2, wheelbase: 390 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,419 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features MAN EfficientCruise 3. Large cab capacity with mid-height roof GX. Battery, 12 V, 230 Ah, 2 units, maintenance free. Three-phase alternator 28 V, 120 A, 3,360 W, LIN. Nwjdpjy D Haljfx Anfjf Diesel engine MAN D2676 LFAY, 353 kW (480 hp) output, 2,450 Nm torque. Euro 6e. Gearbox MAN TipMatic 12.26 DD. MAN EfficientRoll gearbox function. Advanced Emergency Brake Assist (EBA). Adaptive cruise control - ACC Driver comfort Air-conditioning system, Climatronic. Comfort driver’s seat, air-sprung, with lumbar support and shoulder adjustment. Comfort co-driver’s seat, air-sprun. Bunk, top, with slatted support. Bunk, bottom, with slatted support. Auxiliary water heater 4 kW (night heater). Fridge and drawer, 1 unit, centre area, to rear. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Multi-function steering wheel, adjustable height and angle. Front axle tyres - 315/70 R22.5. Rear axle tyres - 315/70 R22.5. JOST JSK 37 C 2" fifth-wheel coupling. Main wheelbase, 3900 mm. Fuel tank capacity 580 l, left, alum. AdBlue tank capacity 80 l, left, plastic. Fuel tank capacity 580 l, right, alum. Maximum speed limiter, 89 km/h, tolerance +1 km/h, electronic, engine speed regulation. Technology MMT infotainment system, Advanced Mid. MAN TeleMatics. Exterior Front headlights, LED. Daytime driving lights, LED. Fog lights, LED. Cornering light, LED. Roof spoiler, 600 mm adjustment range. Side flaps, left folding and right fixed.

Condition: as good as new (ex-display), Year of construction: 2025, Double side planer (Double Surface Planer ) extra wide 400 mm Nsdpjy Dpmujfx Anfowf Maximum working width 400 mm Maximum working height 200 mm Heavy cardan feed system Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Latest generation IE-3 motors Spindle and feed brakes CE

Condition: used, A used steel stacking container is made of hot-dip galvanized steel and built according to the standard Euronorm dimensions of 800 × 600 mm. Nsdpex Huf Ujfx Anfjwf With a generous capacity of 206 liters, the container offers ample storage space for heavy, loose, or bulk products. The closed, profiled walls and bottom reinforce the construction and provide

Condition: used, Pallet offer consisting of 32 pieces of plastic stacking crates (600x400 mm) with 2 open handles. This robust used Euro bin has four closed walls 270 mm high and a bottom with drainage holes. The side walls have an open handle for optimal handling. Nwjdpfx Ajwt Tyqenfof Made of polypropylene with high stability. The plastic bins have a smooth,

Condition: used, Used mesh container in euro size 1200 x 1000 mm. This gitterbox has four tight mesh walls and a steel profiled bottom. Njdpoizaxvofx Anfjwf The frame and mesh are painted for a robust exterior. The mesh box stands on a sturdy steel frame with four legs making it easy to pick up the gitterbox with forklift and pallet truck. The top has a raised

Condition: used, Used rusty mesh steel container with wooden bottom shelves in steel profile in euro size 1200 x 800 mm. Equipped with fixed box sections to place up to 3 divider dividers to distinguish several different products. Nwedpfx Aoy Hpymsnfsf On one long side the gitterbox can be opened halfway. The steel frame and mesh are painted for a robust exterior.

Condition: used, Used steel mesh container with wooden bottom in steel profile of euro size 1200 x 800 mm. On one long side the gitterbox can be folded half open. The steel frame and mesh are painted for a robust exterior. Nodpfx Ajy Hpytenfjwf The sturdy base on four legs makes the gitterbox suitable for forklift and pallet truck and can be picked up from any

Condition: used, Used furniture transport trolley. This nestable roll container consists of a painted steel frame and a folding bottom made of chipboard. The container stands on four nylon swivel castors. Nwjdpfx Aoy Hpy Henfof L: 1800, W: 770, H: 1790 (mm). Product: Roll cage. Type: Furniture roll container. Version: Nestable. Group: Roll cage

Condition: used, Used solid 2 rack roll cage with plastic roll bottom equipped with smooth nylon wheels. Quick assembly and disassembly of the inset gates. Nsdpoy Hp E Asfx Anfswf Each roll container comes standard with 2 nylon straps. Very suitable for distribution of products to and from stores and internal transport. Attention! The roll cages are NOT

Condition: used, Used steel mesh container with wooden bottom in steel profile of euro size 1200 x 800 mm. Nwedpfx Asy Hpyyonfof On one long side the gitterbox can be folded half open. The steel frame and mesh are painted for a robust exterior. The sturdy base on four legs makes the gitterbox suitable for forklift and pallet truck and can be picked up from any

Condition: used, Used Anti-theft rolling container on A-frame made of electrolytically galvanized steel with a load capacity of 500 kg. Equipped with one folding shelf. The bottom, door, shelf and walls are gridded. This container runs on four non-marking rubber swivel casters, two of which have brakes. Nwodpfxey Hp Eco Anfjf This makes the roll container very

Condition: new, Warehouse stage 4,000 x 10,000 mm, capacity 500 kg / m ² Included in the scope of delivery: 4 stand, on one side of 100 x 100 x 3 mm 2 stand, double-sided 100 x 100 x 3 mm 4 main beam C + 300 x 3 x 3,990 mm 10 crossbar S + 300 x 2 x 4,800 mm 20 mounting bracket 3 cross associations 18 chipboard P6, 3000 x 850 x 38 mm, UK white, OK nature Nodjd Hl Niopfx Anfowf incl. mounting material including load signs Dimensions, technical data Steel construction: 4,000 x 10.000 mm Floor area: 40 sqm Top height flooring: freely selectable up to 3,500 mm (other heights on request) height bottom: OK minus 338 mm Load capacity: 500 kg / m ² Support: 100 x 100 x 3 mm Main beam: C profiles C + 300 x 3 mm Crossbar: Sigma profiles S + 300 x 2 mm Flooring: 38 mm chipboard, one side white Support in the following standard colours: RAL 7035, light grey RAL 7016 anthracite grey RAL 3000 flame Red RAL 5003 sapphire blue Other colours available upon request! Accessories, such as stairs, railings, etc. are not included, but can be supplied at an additional cost. (Prices on request)

Condition: new, Warehouse stage 8,000 x 5,000 mm, capacity 500 kg / m ² Dimensions / technical data Dimensions steel construction: 8,000 x 5,000 mm Dimensions surface: 8,000 x 5,000 mm Floor area: approx. 40 m ² OK height flooring: up to 3,500 mm (freely selectable) height bottom: OK minus 338 mm Nwedpfx Asd Htr Hsnfsf net capacity: 500 kg / m ² gleichm.verteilte load Included in the scope of delivery: 6 steel tube supports 100 x 100 x 3 mm 4 main beam C + 300 x 3 x 3,990 mm (perforated) 9 cross bar S + 300 x 2 x 4,800 mm (closed) 18 mounting bracket 3 cross associations 18 chipboard P6, 3000 x 850 x 38 mm, UK white, OK nature incl. mounting material including load signs Stand either in the following standard colours: RAL 7035, light grey RAL 7016 anthracite grey RAL 3000 flame Red RAL 5003 sapphire blue (Other colours on request!) Galvanized main and cross members We manufacture the storage platforms to any other desired measurement. Prices on request! Accessories, such as stairs, railings, etc. are not included in the scope of delivery. These can be supplied at an additional cost. (Prices on request) Our services at a glance: (Prices on request) Installation, construction our general conditions of erection are to be observed Shelf testing Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelf systems Delivery with our own fleet of vehicles (without discharge)

Condition: new, Warehouse stage 16,000 x 5,000 mm, capacity 500 kg / m ² Dimensions / technical data Dimensions steel construction: 16,000 x 5,000 mm Dimensions surface Max: 16,000 x 5,000 mm Floor area: approx. 80 m ² OK height flooring: up to 3,500 mm (freely selectable) height bottom: OK minus 338 mm net capacity: 500 kg / m ² gleichm.verteilte load Included in the scope of delivery: 10 stand on one side of 100 x 100 x 3 mm 8 main beam C + 300 x 3 mm, L = 3,990 mm 18 crossbar S + 300 x 2 mm, L = 4,800 mm 36 bracket 4 Cross associations 33 chipboard P6, 3000 x 850 x 38 mm, UK white, OK nature incl. mounting material incl. load signs Stand either in the following standard colours: Nedpfxod Htr Tj Anfowf RAL 7035 light grey RAL 7016 anthracite grey RAL 3000 flame Red RAL 5003 sapphire blue (other colours on request) Galvanized main and cross members Accessories, such as stairs, railings, etc. are not included in the scope of delivery. These can be supplied at an additional cost. (Prices on request) Our services at a glance: (Prices on request) Installation, construction our general conditions of erection are to be observed Shelf testing Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelf systems Delivery with our own fleet of vehicles (without discharge)

Condition: new, total length: 5,000 mm, total height: 3,000 mm, total width: 4,000 mm, load capacity: 500 kg, Warehouse stage 4,000 x 5,000 mm, capacity 500 kg / m ² Included in the scope of delivery: 4 stand, on one side of 100 x 100 x 3 mm 2 main carriers C + 300 x 3 x 3,990 mm (perforated) 5 crossbar S + 300 x 2 x 4,800 mm (closed) 10 mounting brackets 2 cross associations 9 chipboard P6, 3000 x 850 x 38 mm, UK white, OK nature incl. mounting material including load signs Dimensions, technical data Steel construction: 4,000 x 5,000 mm Floor area: approx. 20 sqm Top height flooring: freely selectable up to 3,500 mm (other heights on request) height bottom: OK minus 338 mm Load capacity: 500 kg / m ² Nsdpfsd Hl D Dox Anfowf Support: 100 x 100 x 3 mm Main beam: C profiles C + 300 x 3 mm (perforated) Crossbar: Sigma profiles S + 300 x 2 mm (closed) Flooring: 38 mm chipboard, one side white P6 Support in the following standard colours: RAL 7035, light grey RAL 7016 anthracite grey RAL 3000 flame Red RAL 5003 sapphire blue Other colours available upon request! Accessories, such as stairs, railings, etc. are not included in the scope of delivery. These can be supplied at an additional cost.

Condition: new, total length: 12,000 mm, total height: 3,000 mm, total width: 5,000 mm, load capacity: 500 kg, Warehouse stage 12,000 x 5,000 mm, capacity 500 kg / m ² Dimensions / technical data: Dimensions steel construction: 12,000 x 5,000 mm Dimensions surface: 12,000 x 5,000 mm Floor area: approx. 60 m ² OK height flooring: up to 3,500 mm (freely selectable) height bottom: OK minus 338 mm net capacity: 500 kg / m ² gleichm.verteilte load Included in the scope of delivery: 8 stand on one side 100 x 100 x 3 mm 6 main beam C + 300 x 3 mm, L = 3,990 mm (perforated) Nwedpfx Aod Htr Renfsf 13 crossbar S + 300 x 2 mm, L = 4,800 mm (closed) 26 mounting bracket 3 cross associations 24 Particleboard P6, 3000 x 850 x 38 mm, UK white, OK nature incl. mounting material incl. load signs Stand either in the following standard colours: RAL 7035 light grey RAL 7016 anthracite grey RAL 3000 flame Red RAL 5003 sapphire blue (other colours on request) Galvanized main and cross members We manufacture the storage platforms to any other desired measurement. Prices on request. Accessories, such as stairs, railings, etc. are not included in the scope of delivery. These can be supplied at an additional cost. (Prices on request) Our services at a glance: (Prices on request) Installation, construction our general conditions of erection are to be observed Shelf testing Runs shelf inspection according to DIN EN 15635 n

Condition: new, Warehouse stage 4,000 x 15,000 mm, capacity 500 kg / m ² m delivery are included: Nodpfxsd Htrye Anfswf 4 stand, on one side of 100 x 100 x 3 mm 4 stands, double-sided 100 x 100 x 3 mm 6 main carrier C + 300 x 3 x 4.190 mm 15 crossbar S + 300 x 2 x 4,800 mm 30 mounting bracket 4 Cross associations 27 chipboard P6, 3000 x 850 x 38 mm, UK white, OK nature UK white, OK nature incl. mounting material including load signs Dimensions, technical data Steel construction: 4,000 x 15,000 mm Floor space: 60 sqm Top height flooring: freely selectable up to 3,500 mm (other heights on request) height bottom: OK minus 338 mm Load capacity: 500 kg / m ² Support: 100 x 100 x 3 mm Main beam: C profiles C + 300 x 3 mm Crossbar: Sigma profiles S + 300 x 2 mm Flooring: 38 mm chipboard, one side white Support in the following standard colours: RAL 7035, light grey RAL 7016 anthracite grey RAL 3000 flame Red RAL 5003 sapphire blue Other colours available upon request! Accessories, such as stairs, railings etc. are not included in the scope of delivery. These can be supplied at an additional cost. (Prices on request) Our services at a glance: (Prices on request) Installation, construction our general conditions of erection are to be observed Shelf testing Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelf systems Delivery with our own fleet of vehicles (without the e.

Year of construction: 2005, condition: used, Item: AV-1832-Vertical-Tank140m3 Vertical Silos Tanks capacity 140.000 L Exterior dimensions: Dia Ø 3500 mm Total H 16750 mm. Vertical stainless steel tanks - 6 pcs. Standing on 4 legs. Klóper bottom with 4" outlet. Nwsdpfoh A H E Eex Anfjf Klóper top with ventilation. AISI 304

Condition: excellent (used), Bandsaw PANHANS BSB630 -used- Swivelling table, APA blade guide top and bottom, Cutting height adjustment via handwheel, Operating pressure gauge ----- Technical Data ----- Nwodpfxoymn E Hs Anfsf Wheel diameter: 630 mm, Max. cutting height: 320 mm, Max. cutting width: 600 mm, Table size: 680x780 mm, Table tilt: 20°, Blade length: 4,480 mm, Motor: 2.2 kW, Extraction ports: 2x100 mm, Dimensions: L=1,200 W=800 H=2,150 mm Quality Info: - Blade tracking / imbalance checked - Band tires renewed - Guides checked - Wheels newly mounted - New belts - Complete basic cleaning - Electrics checked - Immediately ready for operation

Condition: excellent (used), functionality: fully functional, The AERA blue-cord slicer optimizes industrial preparation with efficiency. Designed for fast, accurate cutting, it uses multiple ribbon slicers to guarantee uniform results. In addition, the trim conveyor handles products before cutting, while the blue-cord folder shapes each product perfectly. With its pneumatic control system and belt scrapers, the slicer ensures high performance. What's more, the titanium cutting carriage, equipped with automatic lubrication, reduces maintenance requirements. In conclusion, the AERA model improves both quality and production efficiency, while complying with industrial requirements. COMPOSITION : FILLING CONVEYOR Overall dimensions (L x W x H): 6400 x 1000 x 970mm. Weight: 970 Kg Sliding surface height: 960 +/- 50mm. Stainless steel tubular legs and jacks Synchronous belt width 600mm. Lyre-shaped winding Pneumatically-operated belt quick-release system Servo-motor control with positioning register. Belt scrapers TRANCHEUR Overall dimensions (L x W x H): 1880 x 1030 x 2460mm Weight: 1000 Kg Stainless steel frame: 20 mm Stainless steel panel housing with magnetic safety sensor and pneumatic locking during operation. Components : The slicer is equipped with 4 magazines consisting of : 4 synchronous pinned belt conveyors controlled by a servomotor 4 chutes defined according to the products to be sliced pneumatic control of chute release from loading belts CUTTING CARRIAGE Cutting is performed by a ribbon blade on 2 titanium 200 flywheels mounted on a titanium crosspiece The cutting carriage is guided by "Hepco inox" rails and rollers The cutting motion is driven by a Sew Usocome servo-reducer, a through shaft and two connecting rod-crank systems. The flywheels are driven by a Sew Usocome geared motor equipped with a transmission shaft and an expanding pulley for constant V-belt tension. A torque-limiting tensioning system enables correct adjustment of the tension on the ribbon blade. Cutting blade lubrication is provided by an automatic gun fed by a low-pressure water network. Nsdpfxsu Ivcis Anfjwf INFEED CONVEYOR : Slabs are received and distributed by a two-ply polyurethane belt conveyor driven by a Sew Usocome servo-reducer. Product deposited by a 16 mm diameter saber at the end of the conveyor. Quick belt release system. Open-worked bottom for easy cleaning. Conveyor made entirely of stainless steel.

Condition: new, 400 L capacity all stainless steel with stirring system Nwedpoy A Hvdofx Anfef conical bottom with centrifugal pump power : 2 kW dimensions (l x w x h) : ± 1.200 x 700 x 1.500 mm

Condition: used, Year of construction: 1983, Manufacturer : Moritz Year : 1983 Type : Vacuum mixer Emulsifying motor: 3000 rpm – 3 kW Nwjdpjy E T Swefx Anfef Volume : 50L Vertical stainless steel tank: Diameter 400 mm / Depth: 450 mm Jacketed Total draining 2 variable-speed agitators on the lid - 2 three-bladed propellers: 0 to 200 rpm - Anchor with scrapers: 0 to 100 rpm Two-speed bottom-mounted turbo emulsifier with recirculation Built-in vacuum pump Electrical cabinet A hot water unit is available on request; this request may be subject to a separate quotation.

Condition: used, functionality: fully functional, mileage: 378,341 km, power: 331 kW (450.03 HP), first registration: 03/2023, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Nwodpsy Db Tmefx Anfjf Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps.