Used Brandt Kdf 890 for sale (508)

Condition: new, CNC hydraulic automatic bandsaw for cuts from 0° to 60° to the right, complying with all CE safety regulations. The machine features 9 programs, each consisting of 99 steps, for a total of approximately 890 cutting positions with corresponding piece counting. Operation: Material feed. Fixed clamp closure. Blade rotation and emulsion fluid dispensing; the saw head descends until the cut is complete, and the feed carriage returns to the set position. Saw head return, blade rotation stop, and coolant dispensing. Fixed clamp opening. Cycle repetition. Step-by-step feed via ball screw. Numerical control of cut quantity and length. Hydraulic power unit with cutting pressure adjustment. Blade tensioning achieved through manual rotation of the handwheel and guaranteed by an electromechanical device. Brush-type chip removal device. Bimetallic band saw blade 3010 x 27 x 0.9 mm. Hydraulic power unit motor 0.75 kW. Cutting thickness 1.2 mm. Material feed stroke 600 mm. Electric pump 0.09 kW. Dedpfxjg Np Dxe Al Sewc

Condition: new, overall weight: 49,500 kg, axle configuration: 3 axles, Year of construction: 2026, 3-Axle MULTIMAX "PLUS" semi-trailer, air-suspended and with hydraulically forced steering axles. Technical data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Speed: 80 km/h (legal) Total weight: 49500 kg / 31500 kg Fifth wheel load: 18000 kg Axle load: 31500 kg / 31500 kg Gooseneck length approx.: 3,900 mm Gooseneck width approx.: 2,480 mm Kingpin offset to rear approx.: 2,100 mm Fifth wheel height loaded approx.: 1205 mm Platform length approx.: 9,600 mm Extendable by approx.: ? Platform width approx.: 2,540 mm Loading height at max. load approx.: 890 mm Suspension travel approx.: -55 / +145 mm Axle spacing: 1,360 mm Total weight dependent on fifth wheel load: Yes Special permit required if exceeding country-specific regulations. Technical description Gooseneck: Gooseneck in SNT design to optimize platform length, length approx. 3,900 mm, rear with a bevel of approx. 1,000 mm x 6°. Technical fifth wheel load: 18,000 kg. For tractor-trailer combinations: 4 x 2 and 6 x 2. Platform: Platform, length approx. 9,600 mm with a bevel at the rear of approx. 900 mm x 6°. Platform behind the gooseneck can be hydraulically raised and lowered, length approx. 3,000 mm, loadable up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS A pair of two-piece AXS steel ramps with a length of approx. 4,920 mm and a width of approx. 900 mm. Open grating deck. Hydraulically folding ramp ends. Ramps can be individually hydraulically shifted outwards by approx. 235 mm and inwards by approx. 365 mm. Maximum load and angle of inclination according to technical data sheet: C470319 Maximum inclination angle with lowered platform: 9° Axles and suspension: BPW axles and suspension, all axles hydro-mechanically forced steered. Technical axle load: 12,000 kg Air suspension with lifting and lowering valve. Axle tool. Tires: 235/75 R 17.5 3PMSF, twin tires. Manufacturer according to our choice Load index 143/141J (144/144F) Braking system: Braking system of the brand WABCO EBS-E according to EU regulations. Without connection cable to the tractor unit. Lighting system: 24-volt lighting system in "ASPÖCK-NORDIK full LED" design according to EU regulations. (ASS 3) Metallization: Complete HRM metallization (High Resistance Metallization) Complete steel structure shot-blasted, then hot-dip galvanized with ZINACOR 850 (Zinc 85% - Aluminum 15%). Painting: 6-coat finish: Complete steel structure shot-blasted after welding. 1 coat of zinc-based primer, 1 coat of adhesion primer. Top coat with 2 coats of 2-component paint (acrylic), solid color in RAL colors of your choice, followed by sealing of the cavities with special wax. Rims in silver. Multi-color and special paint finishes available at an extra cost. Steel structure: Steel structure made of high-strength fine-grain steels. Steel qualities: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welders tested according to DIN-EN 287-1. Welding process MAG according to EN ISO 4063. Protective gas M21 according to EN ISO 14175 Djdpeizu Ntsfx Al Sswc Front wall made of steel, plug-in, approx. 400 mm high Connection strip for supply lines to the tractor unit, mounted at the height of the outer frame profile. ASPÖCK-UNIBOX on the connection strip at the front with sockets 24N, 24S & 15-pole. 24N connection according to ISO-1185 24S connection according to ISO-3731 15-pole connection according to ISO-12098 If your pin assignment differs from the ISO connection standard, please inform us. "Anderson" socket on the connection strip at

Condition: ready for operation (used), -Cutting area approx. 300 x 120 mm -saw blade 350 mm -traverse path 370 mm -turning knob D= 1200 mm The round table with the saw unit can be turned very easily on both sides Locks for locking are currently mounted on one side. The same can of course also be mounted on the other side Dwedpsbubukjfx Al Ssc Weight 890 kg

Condition: excellent (used), Year of construction: 2011, 890 USED Dishwasher Hobart. EXTERNAL DIMENSIONS (in cm): - width 60 - length 60 - height 82 INTERNAL DIMENSIONS (in cm): - width 50 - length 50 - height 42 The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / assembly / commissioning of the device. The price is a net price per pcs. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices Djdpetxbl Rofx Al Sjwc

Condition: good (used), Hydraulic press, single-column press, C-column press, oil-hydraulic press, hydraulic single-column press Dwedoupbdgspfx Al Sjc -Handover: in its current condition as inspected -Note: without hydraulic unit and control system -Pressing force: 40 tons -Piston rod: Ø 105 mm -Max. stroke: 710 mm -Mounting plate: 550 x 800 x 45 mm -Mounting plate holes: Ø 18 mm -Dimensions: 890/1570/H610 mm -Weight: 826 kg

Condition: good (used), Year of construction: 1991, Lifting tipper, forklift tipping container, tipping container, tipping trough, forklift trough, -Body: made of stainless steel -Manufacturer BAADER Type 531 Dedpjfx T Hfefx Al Sjwc -Tilt height: 2500 mm (can be changed for an extra charge) -Max. tine width: 740 mm -Chain hoist: Demag, year of manufacture 2007 -Dimensions: 3800/890/H1060 mm -Weight: 326 kg -without documentation

Condition: new, Bowl vibrator incl. pneum. separating ramp - total volume approx. 120 l - diameter bowl approx. 852 mm - max. parts size 160 mm - PU-layer bottom 15 mm - PU-layer side wall 12 mm - motor 1,1 kW - motor speed 1500 rpm Dwedpfx Alod I A Atj Sjc - total height approx. 890 mm - total weight 225 kg - incl. dosing pump - incl. conrol box with variable speed control, 1000 - 1500 rpm

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 48 V, total height: 752 mm, total length: 890 mm, total width: 606 mm, Tested forklift battery for your truck – 48V 5PZS 500Ah – special battery tray + 1 year warranty + incl. aquamatic system + incl. end discharge cable & REMA 320 connector (other connectors can be fitted on request) + Capacity: min. 90–100% (C5 capacity test protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 890 mm Width 606 mm Height 752 mm Weight: approx. 930 kg Suitable for the following models and others: Dwedpfx Ajy Rnmysl Sec Still RX 20-15 Still RX 20-20 Still RX 20-20 P Toyota 5FBE15 Bendi B40/48E-180D Caterpillar EP16N Doosan B20X-5 Hyundai 18BT-9 JAC CPD25 Manitou ME 318 Mitsubishi FB16KT Nichiyu FBT80 Common battery sizes available, feel free to inquire. Transport possible.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 850 mm, controller model: Heidenhain iTNC-530, spindle speed (max.): 6,000 rpm, The machining center underwent a complete overhaul and was repainted in 2025! TECHNICAL DETAILS Travel distances Travel distance X-axis: 2,600 mm Travel distance Y-axis: 700 mm Travel distance Z-axis: 850 mm Spindle Spindle speed: 6,000 rpm Distance from spindle nose to table surface with vertical head: 40 - 890 mm Distance from spindle nose to table surface with horizontal head: 250 - 1,100 mm Spindle interface: HSK A63 Spindle motor power: 20 kW Table Table size: 3,060 x 800 mm Max. table load: 1,200 kg/m² Feed rate Rapid traverse rate X/Y-axis: 40,000 mm/min Rapid traverse rate Z-axis: 30,000 mm/min Swivel head Dwodpfxjzkhvfe Al Sjc Automatic swivel head B-axis: ± 90° Smallest automatic head rotation B-axis: 0.001° Tool magazine Number of tool magazines: 2 Tool positions per tool magazine: 22 Total tool positions: 44 Tool diameter max.: 85 mm Tool length max.: 400 mm MACHINE DETAILS Control model: Heidenhain iTNC-530 Footprint: 9,600 x 3,300 mm Machine height: 3,400 mm EQUIPMENT Continuously variable, automatically swiveling head on B-axis ± 90° Two tool magazines, each with 22 positions High-pressure coolant supply through the spindle Chain-type chip conveyor Operating and maintenance manuals CNC manuals The following work was carried out on the machine in 2025 for the overhaul: Disassembly and overhaul of the ball screw drive or the axis spindle, and replacement of the bearings of the X, Y and Z axes Re-grinding of the wedge/guide strips of the X, Y and Z axes Repair of the dual tool changer, including replacement of the defective encoder, sensor and energy chain Straightening and replacement of bent sheet metal Replacement of oil and filters, and cleaning of the tank Disassembly of the machine table for repair, calibration and cleaning Repair of the coolant tank with restoration of the float switches, paper filter sensors and pumps Repair and/or replacement of push buttons, damaged cables, fans, connectors and sensors of the dual workstation Replacement of the bellows of the X-axis with new parts

Condition: used, functionality: fully functional, Year of construction: 2021, laser hours: 10,941 h, laser power: 6,000 W, total length: 11,115 mm, total width: 3,465 mm, total height: 2,840 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, fume extraction, nozzle changer, Laser cutting system with Mitsubishi Electric 6kW fiber laser source Year of manufacture: 2021. Operating hours of the laser as of 08/2026: 10,941 Table size, X-axis (mm): 3,100 - Y-axis (mm): 1,565 including standard accessories and the following options: - Cooling unit Haosch MCWL-120DTR. 12 kW cooling capacity - Automatic pallet changer - Sideros CaCo3 (calcium carbonate) dispenser for aluminum cutting - Automatic nozzle changer with 21 positions - Drawer for small parts and dross - Automation interface set - Extraction system - Processing head "Zoom-Head" for stepless, automatic adjustment of beam shape and diameter. High-tech for permanent maximum laser power, cutting quality and process stability! - Mitsubishi Electric fiber laser source, integrated into the machine frame - CNC control "D-CUBES" with 19" multi-touchscreen display - Safety light barriers for safe operation of the pallet changer - Rapid traverse speed 170 m/min (simultaneous) - High Peak Piercing for fast piercing of thick structural steel - F-CUT for maximum performance in thin sheet metal - Optimal access via sliding door with an opening of 1,830 mm and additional pivoting door with an opening of 800 mm - Signal light with 5 lights to indicate the remaining time until the end of the process - Narrow gap cutting: Leads to a drastic reduction in nitrogen cutting gas consumption of up to 30%. - ECO mode: Saves up to 70% of energy costs in standby mode through automatic, step-by-step switching to standby mode. - All important CNC/PLC components from Mitsubishi Electric: For maximum reliability and process stability. Significant reduction in maintenance costs. - MEL'S AR Augmented Reality Technology: Automatic generation of a virtual top view of the remaining sheet metal in the machine. Placement and cutting of parts via drag and drop. Djdpfx Aszqu Dcel Sswc Workpiece dimensions (mm): 3050×1525×t25 Pallet weight (kg): 950 Working height cutting table (mm): 890 X-axis (mm): 3,100 Y-axis (mm): 1,565 Z-axis (mm): 120 Accuracy: X-axis (mm): 0.05/500 Z-axis (mm): 0.1/100 Repeatability XY-axis: ±0.01 Dimensions (width × depth × height mm): 11,115×3,465×2,840 Weight (kg): Machining system approx. 7,000 kg Pallet changer approx. 2,400 kg Dismantling and loading are to be carried out by the buyer. We can establish contact with the manufacturer ASTES4 – Group Company of Mitsubishi Electric. Sale without warranty or return, ex location. An inspection during ongoing operation is possible by arrangement.

Condition: good (used), Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table -Type: PMS 14-4 Dedpfxoy Au Nfe Al Sowc -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg

Condition: used, 1 used welding machine Manufacturer: Fronius Model: Synergic 3400 G/W/E Suitable for welding steel, stainless steel, and aluminium using the MIG/MAG process. Dwsdpfx Aoyl Id Tjl Soc Technical specifications: Max. welding current: 340 A Wire diameter: 0.8/1.0/1.2 mm possible Connection voltage: 380 volts Duty cycle (ED) 35% at 340 A Digital display Dimensions (L x W x H): 890 x 460 x 945 mm Total weight: 139 kg

Condition: used, Year of construction: 2003, x-travel:930 mm y-travel:400 mm z-travel:406 mm turning speeds:9-6750 1/min Dwsdpjt U Rm Iofx Al Sjc table::1370 x 254 quill stroke:127 mm quill feed:(3) 0,04; 0,08; 0,15 mm/U bore capacity in steel:32 mm feed range:19 - 890 (x) mm/min spindle cone:SK 40 column arm:200 - 680 mm total power requirement:4 kVA weight of the machine ca.:1,15 t dimensions of the machine ca.:1,5 x 1,45 x 2,2 m 3-axis RSF-electronic Z503 digital display, swivelling vertical head +/- 90°, all 3 axes with Feeds, spindle quill (60 mm), switchable spindle brake, coolant system, bore-feed 0.03; 0.12; 0.06 mm/rev. machine light, angled table, extensive accessories (counter bearing, milling spindles with distance rings, tool holders etc.)

Condition: used, mileage: 253,000 km, power: 265 kW (360.30 HP), first registration: 01/2003, fuel type: diesel, empty load weight: 14,230 kg, maximum load weight: 11,770 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 3,200 mm, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, number of seats: 2, loading space length: 4,700 mm, loading space width: 2,420 mm, loading space height: 800 mm, Equipment: ABS, additional headlights, cabin, central locking, crane, trailer coupling, Vehicle location: Bovenden, aluminum superstructure, with cab, suspension seat, rear window, electric mirrors, heated mirrors, left electric window, right electric window, sun visor, 16-speed switch, ABS (anti-lock braking system), raised exhaust, work lights, leaf suspension, trailer coupling with air, light, and hydraulic connections, lashing rails, rear-mounted crane, demountable, emergency stop, grab control, 2-point hydraulic outrigger, radio remote control, four hydraulic extensions, yellow environmental badge Wheelbase: 3200 mm Body: Aluminum three-way tipper, aluminum drop sides, swinging and folding, with spring relief, Palfinger PK 16502 C, demountable, 12.4 m - 890 kg, remote control, crane 5100 operating hours. Load chart: max lifting capacity 5,580 kg, 4.30 m – 3,310 kg, 5.90 m – 2,270 kg, 7.90 m – 1,530 kg, 10.20 m – 1,220 kg, 12.40 m – 990 kg, oil cooler, grab available at an additional price of €2,500.00. The vehicle is also available without crane for €29,900.00! ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors! Djdpfx Ajv Inmpsl Sjwc

Condition: used, Flame heating device, Roland Groß + Söhne GmbH Ring burner for heating, for weld preheating, casting preheating, etc. Type 1 x 1" Ionization Manufacturer No. ALMA, Year of manufacture 03/20 Connection voltage: 230 volts Pe gas max.: 500 mbar Pe air max.: 10 bar Vgas max.: 30 Nm3/h Vair max.: 300 Nm3/h Includes 10 different flame ring nozzles - Flame monitoring, Hans Henning - Ring nozzle, foldable design consisting of 2 halves, inner diameter 310 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 400 mm, with hose quick-connect coupling and ignition system, diffuser in the center Dodpfjdz Spwsx Al Sowc - Ring nozzle, foldable design consisting of 2 halves, inner diameter 490 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 500 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 590 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 690 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 690 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 800 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 890 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 890 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 990 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, arc length 1500 mm, with hose quick-connect coupling and ignition system, diffuser in the center For heating pipes and containers. For heating steel to welding temperature. Ideal for repair welding and manufacturing of welded components made of fine-grain steels. Preheating for powder flame spraying or Sulzer Metco high-velocity flame spraying. Heating with gas for thermal spraying.

Condition: good (used), Year of construction: 2008, Center height: 445 mm Center distance: 4000 mm Swing diameter over bed: 890 mm Swing diameter over cross slide: 550 mm Swing diameter in gap: 1150 mm Spindle speeds: 0 – 1480 rpm Spindle bore: 106 mm Spindle motor: 22 / 33 kW continuous rating / S 6 (40%) Machine weight approx. 12,500 kg Accessories / Special features: • Cycle control FAGOR CNC 8055i TC with alphanumeric keyboard o 10.4" LCD color monitor o Graphic simulation of cycles o Electronic handwheel for manual machine operation • 3-jaw chuck • 8-station tool turret • 2 fixed steady rests with rollers • Movable control panel • Automatic lubrication of headstock • Automatic lubrication of longitudinal and cross slides • Tailstock with hydraulically operated quill • Coolant system • CE conformity Dwodpfjyy Nlpjx Al Soc Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 532.323/10-0, total height: 6,454 mm, total width: 6,810 mm, total length: 2,810 mm, load capacity per storage section: 180 kg, load capacity: 40,000 kg, A set of 2 Hänel Lean Lifts in a linked lift system is being auctioned here! Machine numbers: 532.323/10-0*1 & 532.323/10-0*2 Exact model designation: Hänel Lean Lift 3060-825/281/340/75/180/40HS TECHNICAL DETAILS Load capacities (each) Max. container load: 180 kg Max. number of containers: 163 Max. total load: 40,000 kg per Lean Lift (deduct container weight) Access point 1 (front side) Clear opening height: 880 mm Access height: 890 mm (standard height) Access point height to operator’s floor: 890 mm LED lighting: yes Dedpfx Aoxr Ng Uol Sowc Manual sliding door: yes Light curtain: yes Access point: Optoelectronic identification system (28-fold) for precise measurement of goods height Drive and travel speed Vertical speed without container: max. 1.83 m/s Vertical speed with container: max. 0.95 m/s Horizontal speed: max. 0.5 m/s Connection: 400 V / 20 A at 50 Hz Lift capacity: 5 kW Vertical motor power: 4 kW Horizontal motor power: 0.37 kW Lift control Controller type: MP 14 N-H TFT Display: Touch display with integrated alphanumeric keypad and function key block USB interfaces: 1 Serial interfaces (RS-232): 2 Ethernet interface: available, for HOST integration (communication with any ERP system) Protocol: SOAP protocol Operating mode: HostWebSOAP for warehouse management in WMS Display language: German (DE) Additional memory card: included, for S-Version (standalone) Module 00 - remote-controlled lift operation Safety equipment: special protective equipment required for remote control outside the field of view MACHINE DETAILS Unit height: 6,454 mm Unit width per system/total: 3,405 / 6,810 mm Unit depth: 2,810 mm Net weight without containers per system: 4,371 kg Container empty weight per system: 2,275 kg Electrical data Phases: 3 Frequency: 50 Hz Voltage: 400 V Current consumption: 10.2 A Minimum cable cross-section of power supply: 2.5 mm² at 9.6 A Maximum fuse rating of power supply: 20 A / 400 V Colour: Pearl grey EQUIPMENT - Hänel Pick-o-Light-Vario (2-axis movable LED light field for colour-marking the requested item) - Height sensors for automatic fill height recognition and height-optimized storage - Hänel slot wall: 131 usable shelf profiles, slot profile 75 mm, container usable heights: 55 - 730 mm in 25 mm increments - High-Speed Generation for increased vertical and horizontal travel speeds - ESB Package: Redundancy system consisting of 8 integrated safety circuits + 2nd safety circuit

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 532.323/20-0, total height: 6,454 mm, total width: 6,810 mm, total length: 2,810 mm, load capacity per storage section: 180 kg, load capacity: 40,000 kg, A set of 2 Hänel Lean Lifts in a linked lift system is being auctioned here! Machine numbers: 532.323/10-0*1 & 532.323/10-0*2 Exact model designation: Hänel Lean Lift 3060-825/281/340/75/180/40HS TECHNICAL DETAILS Load capacities (each) Max. container load: 180 kg Max. number of containers: 163 Max. total load: 40,000 kg per Lean Lift (deduct container weight) Access point 1 (front side) Clear opening height: 880 mm Access height: 890 mm (standard height) Access point height to operator’s floor: 890 mm LED lighting: yes Manual sliding door: yes Light curtain: yes Access point: Optoelectronic identification system (28-fold) for precise measurement of goods height Drive and travel speed Vertical speed without container: max. 1.83 m/s Vertical speed with container: max. 0.95 m/s Horizontal speed: max. 0.5 m/s Connection: 400 V / 20 A at 50 Hz Lift capacity: 5 kW Vertical motor power: 4 kW Horizontal motor power: 0.37 kW Lift control Controller type: MP 14 N-H TFT Display: Touch display with integrated alphanumeric keypad and function key block USB interfaces: 1 Serial interfaces (RS-232): 2 Ethernet interface: available, for HOST integration (communication with any ERP system) Protocol: SOAP protocol Operating mode: HostWebSOAP for warehouse management in WMS Display language: German (DE) Additional memory card: included, for S-Version (standalone) Module 00 - remote-controlled lift operation Safety equipment: special protective equipment required for remote control outside the field of view MACHINE DETAILS Unit height: 6,454 mm Unit width per system/total: 3,405 / 6,810 mm Unit depth: 2,810 mm Net weight without containers per system: 4,371 kg Container empty weight per system: 2,275 kg Electrical data Phases: 3 Frequency: 50 Hz Voltage: 400 V Current consumption: 10.2 A Minimum cable cross-section of power supply: 2.5 mm² at 9.6 A Maximum fuse rating of power supply: 20 A / 400 V Colour: Pearl grey EQUIPMENT - Hänel Pick-o-Light-Vario (2-axis movable LED light field for colour-marking the requested item) Dodpsxyyguefx Al Sowc - Height sensors for automatic fill height recognition and height-optimized storage - Hänel slot wall: 131 usable shelf profiles, slot profile 75 mm, container usable heights: 55 - 730 mm in 25 mm increments - High-Speed Generation for increased vertical and horizontal travel speeds - ESB Package: Redundancy system consisting of 8 integrated safety circuits + 2nd safety circuit

Condition: like new (used), functionality: fully functional, input voltage: 400 V, overall weight: 80 kg, input current: 11 A, Condition: Practically NEW – only used as a demonstration machine (see photos of the very clean interior) Suitable for 2 kg PUR containers (cartridges/blocks) Ideal for edge banding machines, profile wrapping, or other adhesive applications. MOD Technology (Melt-on-Demand): Only melts the required amount of adhesive – prevents PUR glue from burning. Compressed Air/Protective Gas: Operation requires dried compressed air or CO2 (important for PUR processing) Operation: Simple and robust membrane keypad Electrical Connection: 3LPE 400V 50/60Hz Rated Power (Pmax): 4200 W Maximum Current (Imax): 11 A Weight: approx. 80 kg (according to manufacturer) Protection Class: IP32 The unit is fully functional, exceptionally clean, and ready for immediate use. Dwjdpfx Aley D Hfzs Sec Location: Líšťany 33035, Czech Republic (approx. 50 km from the German border / Waidhaus) Search terms / Suitable for equipment from: Homag, IMA, Biesse, Brandt, Holz-Her, SCM, Stefani, Hebrock, Felder, edge banding machine, edge bander, PUR adhesive, premelter, profile wrapping.

Condition: new, PRICE: 2.600 EUR Professional meat mixer model SN50M is designed for fast and uniform mixing of meat, spices and other ingredients in butcher shops, restaurants, processing plants and professional kitchens. This model is an ideal solution for users who require higher capacity, reliable operation and high mixing quality in daily professional use. The powerful 2200 W motor ensures efficient operation and stable performance even under heavier workloads. The working speed of 25 rpm provides even mixing and optimal preparation of products such as minced meat, sausages, cevap mixtures, burger mixes and other meat products. The construction is made of high-quality stainless steel, ensuring long service life, corrosion resistance, high hygiene standards and easy maintenance. Its robust design and stable structure make this model an excellent choice for daily professional work. Compact external dimensions allow easy placement in the workspace while maximizing capacity and working efficiency. Technical specifications: Machine type: Meat mixer Model: SN50M Power: 2200 W Speed: 25 rpm Voltage: 380 V / 50 Hz Dimensions: 890 x 600 x 820 mm Weight: 112 kg Material: Stainless steel Application: Mixing meat, spices and meat mixtures Use: Butcher shops, restaurants, meat processing, professional kitchens Operation: Stable, efficient and reliable Dsdpfx Aoy Ncrnsl Sswc Maintenance: Easy and simple

Condition: used, PRICE: 2.500 EUR Professional meat mixer model SN50J is designed for fast and uniform mixing of meat, spices and other ingredients in butcher shops, restaurants, processing plants and professional kitchens. This model is an ideal solution for users who require high capacity, reliable operation and premium mixing quality in daily professional use. The powerful 2200 W motor ensures efficient operation and stable performance even under heavier workloads. The working speed of 25 rpm provides even mixing and optimal preparation of products such as minced meat, sausages, cevap mixtures, burger mixes and other meat products. The construction is made of high-quality stainless steel, ensuring long service life, corrosion resistance, high hygiene standards and easy maintenance. Its robust design and stable structure make this model an excellent choice for daily professional work. Larger external dimensions provide additional working capacity and easy handling in production facilities and professional environments. Technical specifications: Machine type: Meat mixer Model: SN50J Power: 2200 W Speed: 25 rpm Voltage: 380 V / 50 Hz Dimensions: 890 x 650 x 920 mm Weight: 108 kg Dodpfxoy Nc Iis Al Sjwc Material: Stainless steel Application: Mixing meat, spices and meat mixtures Use: Butcher shops, restaurants, meat processing, professional kitchens Operation: Stable, efficient and reliable Maintenance: Easy and simple

Condition: used, Microcutter Inotec I 225CD 110D This Inotec microcutter is a highly versatile machine, commonly used in the sausage and pet food industries. This inline cutter processes large quantities of product at high speed, producing a homogeneous mass while effectively mixing the ingredients simultaneously. The settings can be adjusted from coarse cutting to fine emulsions. The cutter is equipped with a large feed hopper positioned at a convenient working height. This allows the product to be easily fed into the machine, directly from a bowl cutter if required. The emulsifier is suitable for inline installation. The cutting set can be easily installed and removed. The cutting set experiences minimal wear, ensuring a long service life. Temperature sensors help maintain consistent product quality. The intuitive control panel allows for easy program configuration. The machine is mobile and can be moved as required. Technical specifications: Production capacity: 6,000–15,000 kg/h (depending on the product) Hopper capacity: 200 L Cutting plate diameter: 225 mm Hopper feed height: 890 mm Voltage: 400 V (3 + N, 50 Hz) Dedpfjzwvxhsx Al Sewc Power: 127 kW Weight: 1,000 kg Year of manufacture: 2009 Machine dimensions (W x D x H): 1,200 x 2,250 x 1,300 mm

Condition: used, functionality: fully functional, Manufacturer: TOS Type: H 80 Spindle diameter: 80 mm Spindle travel: 700 mm Spindle taper: Morse taper 5 (MT5) Table size: 1100 x 890 mm / 1120 x 900 mm (X / Y / Z): 1000 mm, 1000 mm, travel: 1100 mm Dwjdpozwmrfofx Al Sjc

Condition: new, 20-26-537/1 FALACH hydraulic briquetting press (new) Type 50 Briquette diameter 50mm Press capacity 40 - 60 kg / hour Briquette length approx. adjustable 35 mm Hopper volume 0.38 m3 Pump motor input 5.5 kW Power consumption 3.8 kW / hour Required input voltage and current 3x400V, 16 A Oil cooler yes Operation continuous Automatic reverse of support wheels yes Automatic switching-out yes Maximum percentage of moisture 15 % Specific weight of briquettes 900 kg / m3 Maximum noise level 68 dB Transport dimensions 1860 - 890 - 1100 mm Weight 390 kg Dedpexrn R Eefx Al Sewc Price 13 030 Eur (EXW Jonava, Lithuania)

Condition: new, Year of construction: 2024, functionality: fully functional, operating hours: 818 h, pressing force: 350 t, stroke length: 890 mm, warranty duration: 12 months, 📋 Technical Specifications (English) Capacity: 350 Tons at 250 bar (including auxiliary cylinders) Main Cylinder: Ø395 mm, Rod Ø300 mm, Stroke: 890 mm Auxiliary Cylinders: Ø80 x 100 mm, Rod Ø50 mm, Stroke: 890 mm Cushion Cylinders: Ø180 x 230 mm, Rod Ø115 mm (4 units) Motor: 18.5 kW – 25 HP, 1500 rpm, IE3, 380 V Pump: 71 cc, 105 L/min, variable displacement, pressure-compensated piston type (Taiwan, imported) Valve Block: NG-16, 24 DC, P-Q proportional control Equipped with precise proportional control for all movements: pump protection valve, decompression relief valve, ram–cushion line, pressure transmitter, auxiliary throat protection valve, cushion-seal protection valve, free fall valve. Electrical Panel: Siemens Screen: GMT 7” (domestic, 1-year warranty) Pre-Fill Valve: NG 160 (Taiwan model) Speeds: Down fast speed: 175 mm/s (P-Q proportional adjustable) Up fast speed: 285 mm/s (P-Q proportional adjustable) Pressing speed: 5 – 14.5 mm/s (P-Q proportional adjustable) Dimensions: Table 1200 x 1000 mm, Daylight 1000 mm Dwodpfx Ajxf Dzgjl Ssc Linear Scale: Yes Light Curtain: Yes Machine Weight: 15,000 kg ± Oil Tank: 1300 x 900 x 600 mm, 700 L capacity