Used Cold Light Lighting System for sale (40,506)

Condition: good (used), Year of construction: 2010, operating hours: 3,641 h, functionality: fully functional, pressing force: 36 t, filling opening width: 1,100 mm, filling opening length: 1,080 mm, bale width: 1,100 mm, bale height: 750 mm, power: 15 kW (20.39 HP), volume flow: 90 m³/h, Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Ppjdpfsu Thh Esx Acrer Year of construction 2010 Hours of operation 3,641 h Press power main press 36 t Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Capacity per cycle time 0,85 m³ Theoretic throughput rate 90 m³/h Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a bulk weight of 35 kg/cbm 1,8 to/h bulk weight of 60 kg/cbm 2,5 to/h bulk weight of 100 kg/cbm 3,1 to/h Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Machine weight baler approx. 4 to Comments: The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating instructions, CE, electrical and hydraulic circuit diagram) is available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Ppodpsx Dnb Uofx Acrsr Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Year of construction: 2023, condition: excellent (used), Weighing and Bagging System Year: 2023 Comprising of: - Ppsdpfx Asy Exfvecrsr 1 x Incline Conveyor, approx. 5m height Gantry 1 x 14 Head Multihead Weigher, dimple pan 1 x Vertical Form, fill and seal bagger, Model: X500 (was packing 180g bags of Mangetaut) 1 x Checkweigher *Lots of videos available*

Condition: excellent (used), CTS Temperature Shock Test Chamber TSS-70/350-A Device Data Manufacturer: CTS GmbH Model: TSS-70/350-A Year of manufacture: 10/2017 Version: Temperature Shock Test Chamber Cooling unit: Water-cooled Description Used temperature shock test chamber by CTS. Suitable for shock and temperature cycling tests. For use in industry, research, and quality assurance. Areas of Application - Material testing - Aging tests - Electronics and component testing - Temperature shock tests - Automotive and QA Temperature Ranges Hot chamber: +50 °C to +220 °C Cold chamber: -70 °C to +100 °C Electrical Data 400 V / 3/N / 50 Hz Power: 19.8 kW Ppsdpfjy H Hk Ajx Acrjr Current: 46.5 A Connection: CEE 63A Refrigeration System Precooling: R452A, 7.2 kg Cooling stage: R23, 2.8 kg CO₂ equivalent: 15.41 t / 41.59 t Water-cooled Pressure / Protection PS: 25 bar PT: 27.5 bar IP 54 Features - Touchscreen control - Microprocessor controller - Programmable operation - Digital setpoint/actual display - 2-zone system - Transfer cart for rapid specimen transfer - Viewing window - Integrated control cabinet - Cooling water connections Technical Construction - Separate hot and cold chambers - Stainless steel test space - Industrial-grade construction Dimensions External: 2335 x 940 x 1820 mm Handling dimensions: 1990 x 940 x 1652 mm Internal: 410 x 480 x 660 mm Weight Approx. 950 kg Documentation - Declaration of conformity - Test certificates - Operating manual - Circuit and piping diagram - Spare parts list Service before delivery (optional) - Functional check - Refrigerant service - Leak test - Test run with log Condition Used. Cosmetic condition as shown in photos. Scope of Delivery - Test chamber TSS-70/350-A - Documentation (where available) Note Used machine, sale without warranty. Inspection can be arranged upon request. Loading and transport can be organized if required. Subject to prior sale and technical modifications. For any questions, please feel free to contact us.

Condition: good (used), power: 129 kW (175.39 HP), gearing type: automatic, fuel type: diesel, color: yellow, Year of construction: 2015, operating hours: 6,900 h, Equipment: air conditioning, Drivetrain Drive: Track Make of engine: C7.1 Weights Empty weight: 18.811 kg Functional Dimensions of cargo space: 620 x 385 x 330 cm CE mark: yes Condition Technical condition: good Ppjdpey E E Abofx Acrer Visual appearance: good Identification Serial number: CAT00D6NVPBA025990 Other information Tyre brand: CAT Emission level: Stage IIIB / Tier IV interim Delivery terms: EXW Production country: FR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information = Additional options and accessories = - Low ground pressure

Condition: used, This listing is for Metrohm 852 Titrando Titration System The unit is in full working condition and ready for immediate use High-precision automated titration system designed for reliable chemical analysis. Ideal for research and quality control labs, offering accurate endpoint detection, user-friendly operation, and robust Metrohm engineering. Transparency Report and Technical Audit: Ppjdpfx Aoy Ehdzocrjr • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, Dear Sir or Madam, We are pleased to offer the following equipment for sale: Keyence VL-500 measuring system. The machine is sold with the equipment shown in the photos and listed in the advertisement text. Location: 40764 Langenfeld PLEASE NOTE! The equipment originates from an insolvency. We are auctioning this off to the highest bidder on behalf of the creditor/bank. This is a closed auction. We do not provide any information regarding the current highest bid. Your bid becomes binding upon receipt by email. Please submit your binding bid by 10:00 am on 13 May 2026. Ppodpfey Iaa Tox Acrjr Once the auction has ended, you will be informed of the outcome within 72 hours.

Condition: excellent (used), CTS Type: TSS-70/350-A Water-cooled refrigeration unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. This unit is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Ppedpfx Ajy Hkgbecrer Typical applications: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical specifications: Type: TSS-70/350-A Temperature range: Warm chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Refrigeration system: Refrigerant: R404A / R23 Precooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg Water-cooled Features / Equipment: - CTS control panel with touch display - Microprocessor-controlled regulation and monitoring system - Program operation - Digital setpoint and actual value display - 2-zone system (warm and cold chamber) - Automatic transfer basket for shock tests Technical design: - Warm and cold chamber separated - Transfer basket system for rapid temperature change - Test chamber made of stainless steel - Insert shelf / wire rack - Viewing window in door - Water cooling connections available - Integrated control cabinet Dimensions: External dimensions (HxWxD): approx. 2335 x 940 x 1820 mm Installation dimensions (HxWxD): approx. 1990 x 940 x 1652 mm Internal dimensions (HxWxD): approx. 410 x 480 x 660 mm Weight: approx. 950 kg Additional data: Protection class: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your safety as a buyer, please note the following information! The following points are carried out on the chambers we offer before sale: 1. Functional check and replacement of necessary components 2. If needed, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run Condition: used Scope of delivery: see pictures (Specifications subject to change and errors excepted!) We are happy to answer any further questions by phone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled chiller unit For sale is a high-quality thermal shock test chamber manufactured by CTS (Clima Temperatur Systeme), model TSS-70/130. Ppjdpfx Acjy Hkfderjr This device is designed for thermal shock testing and is commonly used in industry, research, and quality assurance. Application fields: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K over time ±2 K spatially Temperature change rate: Max. 100 K/min on average for shock test cycles (without radiant heat) Transfer rate: ≤ 15 min in the range -65°C to +200°C with 10 kg ICs Transfer time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 16.7 kW Nominal current: approx. 26.8 A Site-side fuse: 32 A slow-blow Connection: Cekon 32 Cooling system: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features and equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Program operation (up to 100 test programs) - Digital setpoint/actual value display - RS232 interface - 2 free switching channels for controlling test objects on-site - Fault alarm with floating contact (rated for up to 30 V-DC, 2 A) - EMC tested Technical design: - Hot and cold chambers - Transport basket with spindle drive - Test chamber / basket made of stainless steel, Material no. 1.4301 - Insert basket made of stainless steel wire - Pipe duct NW 50 with closing plug - Compressed air connection 1/4" male - Pressureless condensate drain R 1/2" internal thread - Safety door lock - Lockable door with window Dimensions as per installation drawing: External dimensions approx.: 2335 x 940 x 1820 mm Entry dimensions approx.: 1990 x 940 x 1652 mm Test chamber dimensions: Height approx. 410 mm, Width approx. 480 mm, Depth approx. 660 mm Window: 300 x 300 mm Further data: Degree of protection: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average power consumption per test cycle: approx. 8 kWh For your assurance as a buyer, the following procedures are performed on all offered chambers beforehand: 1. Function check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented trial run Condition: used Scope of delivery: see pictures (Specifications subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: Psdpfx Acsy Hkd Horepr - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: good (used), mileage: 470,645 km, power: 353 kW (479.95 HP), first registration: 03/2022, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 4,620 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 9,550 mm, total width: 2,550 mm, total height: 4,060 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking air conditioner, parking heater, power mirror, retarder, seat heater, traction control, trailer coupling, = Additional options and accessories = - Heated mirrors - Digital tachograph - Tachograph (control device) - Fixed - LED lighting - Manual - Lane departure warning system - Fabric - Super Space Cab - Auxiliary braking system = Remarks = Number of axles: 3, Configuration: 6x2, Total tank capacity: 750 liters, Trailer coupling, Kingpin diameter: 40 DIN, Fifth wheel: Fixed, Number of differentials: 1, Suspension type: Air suspension, Cabin type: Super Space Cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Stationary air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Color: White, Heated mirrors, Lighting type: LED, Lane departure warning system, Climate control, Heated seats, Engine power: 353 kW (473 HP), Fuel: Diesel, Euro: 6, Transmission: AS-Tronic, Transmission make: ZF, Gears: 12, Auxiliary braking system, Retarder manufacturer: Intarder, Power steering, ABS, ASR, Starter battery, Body year: 2021, Rotation direction: 1x20, System length: 81 cm, System type: SDG Segment, Central locking, Seat configuration: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, FAN INTARDER 480 HP, Spare wheel, Spare wheel tread: 8% = Further information = Transmission Transmission: ZF, 12-speed, automatic Axle configuration Tire size: 315/80R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Steered; Tire tread left: 8 mm; Tire tread right: 13 mm Axle 2: Twin tires; Inner left tire tread: 10 mm; Outer left tire tread: 10 mm; Inner right tire tread: 9 mm; Outer right tire tread: 10 mm Functional Loading platform height: 123 cm Condition Technical condition: good Visual condition: good Damage: none Number of keys: 3 Financial information Lease price: €661 per month (default, 60 months); Please inquire for further information and terms Identification Registration: KLEYN1 = Company information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our inventory covers all European makes, model years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-changing inventory • Recognizable quality • Good prices • Trustworthy business practices • Multilingual service • We understand our customers Psdpfey El Nhsx Acrepr • Support with import and transport • (Export) registration plates arranged quickly • Professional technical services • The security of 'recognizable quality' • And more.... Please visit our website for special offers and a full inventory: Leasing through Kleyn Trucks is available in most European countries! Quickly calculate your lease rate and submit your inquiry through our website. Ask directly about our European warranty package.

Condition: good (used), mileage: 596,517 km, power: 355 kW (482.67 HP), first registration: 01/2023, fuel type: diesel, tire size: 315/60R22,5, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 10,000 mm, total width: 2,550 mm, total height: 3,900 mm, Year of construction: 2023, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking air conditioner, parking heater, power mirror, retarder, seat heater, traction control, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Digital tachograph - Tachograph (control unit) - Fixed (mounting or coupling) - LED lamp Podpfeytnv Eex Acrjpr - Manual adjustment - Radio/Cassette - Sleeper cab - Lane departure warning system - Fabric upholstery - Additional braking system = Remarks = Number of axles: 3, Configuration: 6x2, Kerb weight: 10,390 kg, Gross weight: 26,500 kg, Total tank capacity: 544 liters, Trailer coupling, Kingpin diameter: 40 mm DIN, Chassis height: 93 cm, Fifth wheel: Fixed, Number of locks: 1, Suspension type: Air suspension, Cabin type: Sleeper cab, Cruise control, Tachograph (control unit), Digital tachograph, Air conditioning, Parking air conditioner, Auxiliary heater, Electric windows, Electric mirrors, Radio/Cassette, Carplay, Color: White, Heated mirrors, Lighting type: LED lamp, Lane departure warning system, Climate control, Seat heating, Bluetooth, Engine power: 355 kW (476 Hp), Fuel: Diesel, Emissions standard: Euro 6, Transmission type: AS-Tronic, Gearbox brand: ZF, Gears: 12, Additional braking system, Retarder brand: Intarder, Power steering, ABS, ASR, Starter battery, Central locking, Seating layout: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual = Further Information = Transmission Gearbox: ZF, 12 gears, automatic Axle configuration Tyre size: 315/60R22.5 Brakes: disc brakes Suspension: air suspension Axle 1: Steering; tyre tread left: 5 mm; tyre tread right: 10 mm Axle 2: Twin tyres; inside left tread: 15 mm; outside left tread: 15 mm; inside right tread: 15 mm; outside right tread: 14 mm Axle 3: Lift axle; left tread: 7 mm; right tread: 7 mm Weights Unladen weight: 10,390 kg Payload: 16,110 kg Gross vehicle weight (GVW): 26,500 kg Condition Technical condition: good Visual condition: good Damages: none Number of keys: 1 Financial Information Leasing price: €917 per month (default, 60 months); Please inquire for more information and terms. Identification Registration: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used commercial vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, model years, and price ranges. Why buy at Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • Good prices • Reliable business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates arranged quickly • Expert technical services • The assurance of 'visible quality' • And much more… Please visit our website for special offers and the complete stock list: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: used, mileage: 388,200 km, power: 302 kW (410.61 HP), first registration: 03/2012, fuel type: diesel, tire size: 425/65 R 22.5, axle configuration: 8x4, wheelbase: 6,710 mm, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: air, total length: 9,240 mm, total width: 2,510 mm, Year of construction: 2012, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, electric window regulation, trailer coupling, = Additional Options and Accessories = - 8x4 axle configuration - Digital tachograph - Lifting axle - Air suspension - Hub reduction - PTO (power take-off) - Radio/CD player - Sun visor - Towing hitch = Further Information = Podpfx Aey Iamgocropr Technical Details Number of cylinders: 6 Engine displacement: 12,882 cc Axle Configuration Front axle: Tyre size: 425/65 R 22.5; Steered; Left tyre tread: 45%; Right tyre tread: 45%; Suspension: air suspension Rear axle 1: Tyre size: 315/80 R 22.5; Twin tyres; Inner left tread: 60%; Outer left tread: 60%; Inner right tread: 60%; Outer right tread: 60% Rear axle 2: Tyre size: 315/80 R 22.5; Twin tyres; Inner left tread: 25%; Outer left tread: 25%; Inner right tread: 25%; Outer right tread: 25% Rear axle 3: Tyre size: 425/65 R 22.5; Steered; Left tyre tread: 50%; Right tyre tread: 50%; Suspension: air suspension Weights Unladen weight: 10,930 kg Payload: 28,070 kg Gross vehicle weight: 39,000 kg Functional Crane: Palfinger / Epsilon Q170295TR, year of manufacture 2012, mounted behind cab Condition Damages: none

Condition: used, Year of construction: 2003, machine/vehicle number: 519553, Central extraction system Adlolph & Co. (JKF) with screw conveyor and rotary valve. Manufacturer: Adolph & Co. (JKF) Type: AC 2 LK Year of manufacture: 2003 Suitable for dust and chips Volume flow: approx. 16,000 m³/h With air recirculation 1 piece Sluice filter, galvanized - Year of manufacture 2003 - AC 2 LK - Filter area: approx. 150m² - Cleaning of the filters via a vibration motor - Filter housing made of galvanized sheet steel - 3 inspection doors - Pressure relief surfaces - Exhaust air connection according to local requirements - Filter base frame in welded steel construction, galvanized. - Including dry extinguishing line, C connection 3 pieces Extraction fans: Pedpfeywd I Tsx Acrepr 1 piece Manufacturer: JKF Type: JK - 40K L Motor power: 11.0 kW Speed: 2,400 rpm Air flow: ~ 10,800 m³/h 1 piece Manufacturer: JKF Type: JK - 30K L Motor power: 7.5 kW Speed: 2,900 rpm Air flow: ~ 7,500 m³/h 1 piece Manufacturer: JKF Type: JK - 30K L Motor power: 7.5 kW Speed: 2,900 rpm Air flow: ~ 7,500 m³/h1 piece Pipe components Air return - incl. galvanized ducts - Must be supplemented for a new location 1 piece Control cabinet With PLC Siemens control, in dustproof sheet steel standard housing, designed as a wall igned for: Installation dimensions: - Length: 5,250 mm - Width: 1,300 mm - Height: 4,650 mm (may vary depending on equipment) Electrical connection value: - Approx. varies depending on number of fans - 400 V/50 Hz - Control voltage 230 V AC/24 V DC - Location, not in stock

Year of construction: 2021, condition: like new (used), Ref: MM6411 Cassel Shark 2A Metal Detector system. Model MI4 ( 4 frequency range from 35 - 300Khz ). Aperture 450mm x 200mm ( 125mm effective height ). St/St conveyor 1800mm long with 400mm wide modular belt. Ram reject into lockable reject bin. Full Retail Spec System. Year 2021 Lockable castors fitted Handing left to right Psdpfoy Eg Nvex Acrepr Ex-demonstration so system is as-new condition.

Condition: used, mileage: 200,720 km, power: 162 kW (220.26 HP), first registration: 07/2012, fuel type: diesel, tire size: 285/70R19,5, axle configuration: 4x2, wheelbase: 4,200 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro5, suspension: steel, Year of construction: 2012, Equipment: electric window regulation, Technical information Number of cylinders: 6 Engine capacity: 6.693 cc Drivetrain Drive: Wheel Make of engine: DAF Pjdpfx Acoy Ibzrorjpr Axle configuration Tyre size: 285/70R19,5 Suspension: leaf suspension Rear axle: Double wheels Weights Empty weight: 7.860 kg Carrying capacity: 8.140 kg GVW: 16.000 kg Functional Make of bodywork: DALBY = Additional options and accessories = - PTO - Tipper hydraulics

Year of construction: 2022, operating hours: 1,844 h, condition: used, Type of fuel: Diesel New: No Ppjdsucr Inepfx Acrer Field of application: Construction Make of engine: Kubota Dimensions of cargo space: 209 x 129 x 250 cm Serial number: ESF208512 Please contact PFEIFER GROUP for more information

Year of construction: 2023, operating hours: 777 h, condition: used, Type of fuel: Diesel New: No Field of application: Construction Make of engine: Kubota Dimensions of cargo space: 209 x 129 x 250 cm Serial number: ESF210134 Ppsdpfjucr Ibex Acror Please contact PFEIFER GROUP for more information

Year of construction: 2023, operating hours: 805 h, condition: used, Type of fuel: Diesel New: No Podpfoucr Ihox Acrjpr Field of application: Construction Make of engine: Kubota Dimensions of cargo space: 209 x 129 x 250 cm Serial number: ESF210117 Please contact PFEIFER GROUP for more information

Year of construction: 2022, operating hours: 2,309 h, condition: used, Type of fuel: Diesel Psdpfx Aoucr Hqscrspr New: No Field of application: Construction Make of engine: Komatsu Dimensions of cargo space: 209 x 129 x 250 cm Serial number: ESF208606 Please contact PFEIFER GROUP for more information

Year of construction: 2023, operating hours: 40 h, condition: used, Type of fuel: Diesel Podpfx Ajucr E Tecrspr New: No Field of application: Construction Make of engine: Kubota Dimensions of cargo space: 209 x 129 x 250 cm Serial number: ESF210135 Please contact PFEIFER GROUP for more information

Year of construction: 2022, operating hours: 3,432 h, condition: used, Type of fuel: Diesel New: No Field of application: Construction Make of engine: Komatsu Dimensions of cargo space: 209 x 129 x 250 cm Serial number: ESF208606 Please contact PFEIFER GROUP for more information Psdpey Hbuiefx Acropr

Year of construction: 2022, operating hours: 1,279 h, condition: used, Type of fuel: Diesel New: No Pedpfxoy Hbt Se Acrjpr Field of application: Construction Make of engine: Kubota Dimensions of cargo space: 209 x 129 x 250 cm Serial number: ESF208511 Please contact PFEIFER GROUP for more information

Year of construction: 2022, operating hours: 1,018 h, condition: used, Type of fuel: Diesel New: No Field of application: Construction Ppjdpfx Acoucrzusror Make of engine: Kubota Dimensions of cargo space: 209 x 129 x 250 cm Serial number: ESF208518 Please contact PFEIFER GROUP for more information

Year of construction: 2022, operating hours: 1,620 h, condition: used, Type of fuel: Diesel New: No Field of application: Construction Make of engine: Kubota Dimensions of cargo space: 209 x 129 x 250 cm Serial number: ESF208623 Please contact PFEIFER GROUP for more information Psdpfoucr Dijx Acrepr