2
Belonged to a CTX400
The track width is 36cm, the height 25cm, the length about 184cm.
Br0f8g2awm
10
Big Pack Sand unload station
3 Parts
1 Underframe including roughfilter und funnel (Fillingsensor)
Egpesjgg8
2 Upperframe can put off
3 hanging frame for Big Pack
External dimensions: 1640 mm x 1640 mm, h. 4100 mm Usable dimensions: 1540 mm x 1540 mm, h. 1030 mm Output Ø: 80 mm
Height under exit: 1250 mm
With forklift shoes on the big bag frame
Filter system
Pick up in 15713 Königs Wusterhausen south of Berlin or transort company
We have here an other Big-Pack Forklift Frame to offer A4...
3
For sale is an apparatus for separating magnetic and non-magnetic bulk materials. Specifically, this component was built to separate abrasive (steel balls D=1.5mm) and moulding sand.
For this purpose the bulk material is guided past two permanent magnetic rollers.
Ui338aol
Afterwards fine material is separated by means of a continuous air flow, for which an extraction system must be connected.
For further applications or sizes please contact us.
8
We sell our trough chain conveyor due to new acquisition.
It has run with us until the end.
Pu9u8e
We loaded only sawdust on open trucks.
The drive motor is so to speak new, we have replaced about 3 weeks ago.
3
Pipe Screw Conveyor
Pumping medium: ash/fly ash
conveying capacity: max 0,6 t/h
Version: not cooled
Bghhewei
Pipe length: 4.645 m
Trough: St37-2
Coil: HARDOX
See drawing for further data and dimensions.
This screw conveyor is no longer needed for the new plant and is therefore sold.
The screw conveyor can be inspected by appointment.
6
Rotary valve ZSV 320 - 21 - LU
Hole pattern inlet and outlet DN 300 PN 10,
Overall height 530 mm,
Housing made of material RSt 37-2 (1.0038),
with a large inspection opening in the cellular wheel area,
Nozzle 1" on empty side of the cellular wheel housing,
Inner surfaces of the housing with wear protection layer
Hardness > 52 HRC, intermediate layer (tungsten), hardness 70 HRC
produced by means of an application process, layer thickness approx. 2 mm
Cellular wheel Ø 320 made of material RSt 37-2...
3
Belonged to an Ecoturn - unused!
The track width is 35 cm, height approx. 26cm, length approx. 2 meters.
Cgrmqq8g
5
Hopper on reciprocating moving bottom
Moving floor with metal ladders
Volume 180 m3
Hydraulic power unit power 22 kW
16 cycles / hour
Bdwyfcyk
2 lump breakers unit power 7.50 kW
Length 20,000 mm x width 3,800 mm x height 4,000 mm
5
Trough screw conveyor FS NW 180 x 4500
Condition see pictures
Subject to prior sale!
Looking for used filter plants?
We offer you a short term available selection of used filters.
To contact us on our used filters and accessories.
Bec8qp9veg
6
Your contact person in our home:
Mr: André evening
Mr: Marcel Brahms
Mr: Simon blank
We offer a new climbing belt conveyor for sale here.
In stock: NL
Included in the scope of delivery:
Bcmjpn7bdn
01 x climbing belt conveyor, new
Discharge height: 2000 mm
Band width: 520 mm
Usable width: 320 mm
Drive: drum motor
Material color: Green
Band with studs & wave edge (height 40 mm)
-incl. stand works & wheels
-without E-connection
Our services at a glance:
(Prices on request)
Installation, con...
3
Pipe Screw Conveyor
22iuh7
execution: cooling screw
Pumping medium: ash/fly ash
conveying capacity: max 1 t/h
Temperature medium: max. 250 °C
Pipe length: 3.515 m
Trough: 1.4541
Coil: 1.4541
See drawing for further data and dimensions.
This screw conveyor is no longer needed for the new plant and is therefore sold.
The screw conveyor can be inspected by appointment.
3
Conveyed material: bulk material, e.g. steelworks slag, 0-150 mm, 25-30 t/h, 2 t/m3
Type: 800 x 16,000 mm,
Axle length: 16,000 mm
Conveyor width: 800 mm (width: 700 mm)
Section: Roller conveyor with inlet - sheet metal profile construction
Belt: EP400/3 with studs, H = 40 mm
Drive: SEW, cold conductor, 400 V / 50 Hz / IE3
Drive drum: approx. 272 mm, with rubber
Clamping drum: approx. 272 mm
Band speed: approx. 0.8 m/s at 50 Hz
Scraper: No
Schurre: Yes, incl. adapter for Trellex dustcloth
Support...
6
Screw conveyor type SF D 160 with a diameter of 125 mm, a length of 5,000 mm and a power of 1.5 kW. Material: steel. For further information please contact the supplier.
Bixrlmc0sz
4
Type : chip storage - push floor
Condition : as is where is
Length : of ladders: ~ 10,5 m mm
Width : of ladders: ~ 1,2 m mm
Bin volume : ~ 9,2 x 6,5 m, ~ 60 m² m³
Capacity : 100 m³/h
Main motor incl. : yes
Voltage : 380 V
Frequency : 50 HZ
including:
- hydraulic
Nm0tp
- 4 pcs hydraulic cylinders
- 4 pcs ladders
2
Rotary Valve, Fördertechnik Freital, Inlet: 200x200 mm
Gwp7bomxo
7
Your contact person in our home:
Mr: André evening
Mr: Marcel Brahms
Mr: Simon blank
We offer you a new trough conveyor
to purchase including hopper.
Included in the scope of delivery:
01 x troughed conveyor, new
Overall length: 6,000 mm
Bcmbxpkyjn
Band width: 500 mm overall width: 680 mm
Roll stations: 2-piece, Ø 50 mm
Version: gemuldet
Material color: Green
-Incl. troughed conveyor
-without stand works
-without E-connection
Our services at a glance:
(Prices on request)
Installation, c...
3
Pipe Screw Conveyor
Pumping medium: ash/fly ash
Delivery rate: max 2t/h
Temperature medium: 250 °C
Version: not cooled
Pipe length: 5,9 m
Fefr2azea
Trough: St37-2
Coil: HARDOX
See drawing for further data and dimensions.
This screw conveyor is no longer needed for the new plant and is therefore sold.
The screw conveyor can be inspected by appointment.
4
Material: Mild steel
Driving force: 2,2 kW
Bfrl27ywqh
Dimensions: L: 2325 mm x W: 350 mm x H: 370 mm
Empty weight: 370 kg
Speed: 29 1/min
Condition: Used
Technical documentation: Yes
Accessories: Including solid slide valve
4
Screw conveyor type SF D 200 of the German manufacturer AMANDUS KAHL with a diameter of 200 mm, a length of 4,500 mm and left-hand thread. Offset geared motor with 3.0 kW. Material: structural steel. For further information please contact the supplier.
Nz2oh
1
separator KOCH TM 8, 220 Volt, price: 240 €, contact: Mr. Rainer Eckerle
Bkxdvpw7q0
4
Rotary Valve, Westinghouse, look at Nameplate, Inlet.: 250x250 mm
Bltni9fv2r
3
Length: 2300 mm
Motor: SEW- EURODRIVE 0,55kW
Bfn27wdoit
6
Pipe Screw Conveyor
Pumping medium: sand
Delivery rate: max 2t/h
Temperature medium: max. 150 °C
Pipe length: 7.095 m
This screw conveyor is no longer needed for the new plant and is therefore sold.
The screw conveyor can be inspected by appointment.
Suu9zwxb
4
The station consists of (1) roots blower (RKR K70R, YOM 1985, P=1bar, V=14m³/min), (2) filling funnel, (3) worm drive, (4) control with fill level indicator. There are three silos à 26m³ optionally availble.
Vrwlk3
1
Proportioning screw of the German manufacturer AMANDUS KAHL with a diameter of 200 mm, a length of 2,000 mm and a power of 2.2 kW. Material: steel.
Pufj9e
For further information please contact the supplier.
1
material conveyor MOTAN Metro HBS 30, year: 2010, price: 1.700 €, contact: Mr. Rainer Eckerle
Yqifbc
5
2 pieces rotary valves of gyroscope with gear motor and adjustable impeller.
Condition very good. There is almost no wear to be seen.
Bblurqyefg
!! Price per piece !!
Geared motor SEW
Model: RF 76
Power: 0,37 KW
Speed: 6.9 rpm
Operating factor geared motor: 1.45
adjustable sealing discs
Content per cell: 1.28 litres
Theoretical conveying capacity: 4.2 m³/h
Dimensions L;W;H: 1120; 340; 350
1
- Vibratory dosing conveyor with 2 motors
Bh09olmnqh
- height adjustable
- 500 mm x 2700 mm
2
Pipe Screw Conveyor
Pumping medium: ash/fly ash
Delivery rate: max 2t/h
Bjqkpbg8yb
Temperature medium: 250 °C
Version: not cooled
Pipe length: 6,36 m
Trough: St37-2
Coil: HARDOX
See drawing for further data and dimensions.
This screw conveyor is no longer needed for the new plant and is therefore sold.
The screw conveyor can be inspected by appointment.
8
Plate diameter: 400 mm
Be73t7kgq8
Without vibration control,
7
Screw conveyor type SF D 200 with a diameter of 200 mm, a length of 2,400 mm and a power of 2.2 kW. Material: steel.
Nzfjz
For further information please contact the supplier.
1
blower device MOTAN HBS, 2,2 kW, year: 2006, price: 2.100 €, contact: Mr. Rainer Eckerle
Dgd9hivzq
8
2 bunker conveyors, one bunker with auger discharge, the other bunker is equipped with dosing chutes for wood chips. Volume Volume: 28 m³Height of upper edge of hopper: 4800mmLength of hopper: 4000 mmWidth of hopper: 4000 mmHeight of hopper: 3200 mmThickness of sheet metal hopper: 5 mmDiameter of discharge screw: 320 mmGetriebemotor: SEW R57 3 KW 52 rpmHopper can be dismantled into 4 parts. Dismantling and loading are taken over by us. !!! If required, the conveyor belt can be purchased ! belt w...
2
Pipe Screw Conveyor
Pumping medium: lime
Delivery rate: max 10 m³/h
Pipe length: 5.815 m
Trough: St37-2
Coil: HARDOX
Bjqkmb2gpx
See drawing for further data and dimensions.
This screw conveyor is no longer needed for the new plant and is therefore sold.
The screw conveyor can be inspected by appointment.
5
Screw conveyor of the German manufacturer AMANDUS KAHL with a diameter of 200 mm, a length of 2,650 mm and a power of 1.5 kW. Material: steel.
For further information please contact the supplier.
Tng0qae
1
material exhauster MORETTO F5 / F40, 220 Volt, year: 2014, price: 690 €, contact: Mr. Rainer Eckerle
77lgugqcw
15
Water-cooled trough screw conveyor for ash discharge from boiler.
1-shaft screw dryer
Screw heat exchanger
Trough width: 440 mm
Trough length: 5600 mm
Outlet: 200 x 300 mm
Delivery volume: 1m³/h
Grain size: 0-1mm and coarse pieces up to 50 mm
Bbolzdn8v7
Product Temp. on: 900°C
Product Temp. off: 250°C
Screw material: 1.5415
Material trough: 1.5415
Operating pressure screw: 2 bar
Operating pressure trough: 2 bar
Total weight with gear motor approx. 4 tons
Geared motor: 3 KW
Speed: 2 rpm
Torque: 1...
5
Pipe Screw Conveyor
Pumping medium: sand
Delivery rate: max 2t/h
Design: dust-tight not cooled
V3rdxj
Pipe length: 3,4 m
Trough: St37-2
Coil: HARDOX
See drawing for further data and dimensions.
This screw conveyor is no longer needed for the new plant and is therefore sold.
The screw conveyor can be inspected by appointment.
5
Proportioning screw with a diameter of 200 mm, a length of 2,000 mm and a power of 2.2 kW (offset geared motor). Special feature: special inlet thread. Material: steel. For further information please contact the supplier.
Endeskj
1
material conveyor MOTAN BCB 75 A HBS 7,5 kW, year: 2006, price: 3.100 €, contact: Mr. Rainer Eckerle
Bd7zr7fv0w
Pipe screw conveyor / fine dosing device with crammer
Pumping medium: lime
delivery capacity: max 300l/h
Pipe length: 1.0 m
See drawing for further data and dimensions.
This screw conveyor is no longer needed for the new plant and is therefore sold.
Yslwls
The screw conveyor can be inspected by appointment.
4
Screw conveyor SF D 315 with a 4.0 kW offset geared motor. Capacity: 35 m³/h at 80 Hz, 22 m³/h at 50 Hz and 9 m³/h at 20 Hz. For further information please contact the supplier.
Nztlf
1
separator KOCH TM 8, 24 Volt, price: 490 €, contact: Mr. Rainer Eckerle
Billezsvnp
1
Pipe Screw Conveyor
Bjqkgwgbhf
Pumping medium: ash/fly ash
Delivery rate: max 70 m³/h
Temperature medium: max. 90 °C
Pipe length: 5,9 m
Trough: St37-2
Coil: HARDOX
See drawing for further data and dimensions.
This screw conveyor is no longer needed for the new plant and is therefore sold.
The screw conveyor can be inspected by appointment.
3
Screw conveyor type SF 400 with a diameter of 400 mm, a length of 6,200 mm and a power of 2.2 kW. Screw shaft with right-hand thread. Pitch 350 mm, length (centre inlet to centre outlet) 6,200 mm. Material: steel. For further information please contact the supplier.
Bixpqci2as
1
material conveyor KOCH A 20, incl. vacuum pump, 1,2 kW, 200-300kg/h, price: 2.850 €, contact: Mr. Rainer Eckerle
39xmzyeom
4
Discharge screw of the German manufacturer AMANDUS KAHL with a diameter of 400 mm, a length of 9,000 mm and a power of 3.0 kW. Front side open, right-hand thread inlet area. Material: steel. For further information please contact the supplier.
Elkvr7ia0
1
2 components dosing feeder SPECTROCOLOR Color A SFX 160-MG2-MG4-0, price: 2.450 Euro, contact: Mr. Rainer Eckerle
Fwzqxxn
5
Conveying screw with a diameter of 160 mm, a length of 3,043 mm and a motor with 2.2 kW. Material: steel. For further information please contact the supplier.
Bixrdbb7b7
3
Screw conveyor of the German manufacturer AMANDUS KAHL with a diameter of 315 mm, a length of 3,687 mm and a power of 2.2 kW. Material: steel. For further information please contact the supplier.
Bixptuw8q8
This may be of interest to you
Didn't find what you were looking for? Please contact our partners for this category :
Dealer for Bulk feeders
Dealer for Bulk feeders