Used Colly Pv 125 Es for sale (11,091)

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 43225, total length: 5,500 mm, total width: 2,000 mm, overall weight: 6,000 kg, Small handling system installed in the machine. A used machine from a site closure is being sold. Csdpozrb Spsfx Aknoha Sale is made excluding any warranty for defects. The machine has not been tested but was operational until the very end.

Condition: good (used), Holac AU125 dicer, direct from meat factory. Good condition. Codpfx Aksqv Ezkeneha

Condition: good (used), Year of construction: 2001, Ref. no.: 18092 Manufacturer: ENGEL Type: ES 1350H 200W / 300HL-2F Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg Further information: ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout. Motor and Hydraulic System The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil feeds the clamping cylinder, the injection pistons of both units, and the ejector system. The thick red hydraulic hoses visible behind Unit B carry this high-pressure oil flow — both units are supplied via independent hydraulic circuits, allowing Unit A and Unit B to operate simultaneously without influencing each other. Operating Principle The two independent injection units are positioned at 90° to each other — in an L-shape. The mould is locked with 300 tonnes of clamping force. Unit A injects the primary material into the mould at 1834 bar. Immediately afterwards, Unit B injects the second material or colour from a 90° angle into the same mould at 1620 bar. The two materials bond at a molecular level inside the mould, cooling is completed and the ejectors push out the finished 2K part as a single piece. No gluing, screwing or assembly is required — two materials emerge as one single part in a single cycle. Chedpowm Iy Eofx Aknoa Applications Automotive interior and exterior trim parts, large technical plastic components, parts combining a rigid body with a soft grip surface, two-colour large-surface parts.

Condition: new, The Newpower Generator proudly presents their new NWK140 Soundproof Plus series. These generator sets are equipped with extra sound curtains in the cabins, which guarantee a 15 percent reduction in noise levels compared to the standard series. The unit is new, complete including control, diesel tank, exhaust batteries, mechanical speed controller, AVR, battery charger, cooling water heater, sockets, FI protection circuit breaker. Codpjni U R Asfx Aknsha - Reinforced soundproofing - Extra quiet operation - Grid monitoring, grid feed-in - Ready for immediate use Technical data: Model: NWK140 Soundproof Plus emergency generator Fawde Motor Newpower generator set with extra soundproofing Engine : Fawde CA6DF2-17D , 6 cylinder, water cooled, intercooler Generator: Newpower NW/N140 Continuous power: 100 kW / 125 kVA Maximum power: 110kW / 138kVA Noise level (7m): approx. 65 dB Connection: 1x5P 125A, 2x5P 63A, 2x2P 16A sockets and 5-wire cable connection Frequency : 50Hz Voltage: 400/230V RPM : 1500 rpm. Control: Comap IL4 AMF8 Year of construction: 2023 (new) Dimensions (LxWxH) : 3270x1130x2150 mm Weight: 2297 kg Tank: 300 L. (possibility to connect to an external tank) At 100% load: approx. 23.7 L/h At 75% load: approx. 18.9 L/h At 50% load: approx. 12.5 L/h additional costs 250A automatic switch : 1080 € 400A automatic switch: 1620 € Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: used, mileage: 193,000 km, power: 338 kW (459.55 HP), first registration: 10/2019, fuel type: diesel, empty load weight: 14,250 kg, maximum load weight: 11,750 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 3,900 mm, next inspection (TÜV): 06/2026, brakes: intarder, color: silver, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space length: 5,200 mm, loading space width: 2,420 mm, loading space height: 1,000 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, crane, cruise control, differential lock, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, including house, 1 comfort seat, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, navigation system, auxiliary heater, air horn, ABS (anti-lock braking system), traction control (ASR), intarder, auxiliary drive, automatic transmission, differential lock, fog lights, work lights, revolving beacon, tool box, leaf/air suspension, last axle liftable and steerable, trailer hitch with air, light, and hydraulic connections, lashing eyes, U-shaped guard, flap tailgates, roof hatch, crane behind the house, emergency stop, grapple control, foldable, elevated platform, 2-point hydraulic support, remote control, 5x hydraulic outriggers, green environmental badge. Wheelbase: 3900 mm, Body: 3-sided tipper body with aluminum side panels & Hiab X-HiDuo 188 ES-5 crane with remote control, Transmission: 12 TX 2621 TD with intarder! Load chart: 4.6m-3400kg, 8.4m-1640kg, 14.7m-840kg! Chodpfey U Id Tex Aknsa Pallet fork available at an extra charge! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 185 mm, travel distance Y-axis: 125 mm, travel distance Z-axis: 200 mm, total height: 1,892 mm, total width: 875 mm, overall weight: 570 kg, spindle speed (max.): 5,000 rpm, spindle motor power: 750 W, product length (max.): 1,730 mm, number of axes: 3, This 3-axis EMCO PC MILL 125 was manufactured in 2000. It features an X-axis travel of 185 mm, Y-axis travel of 125 mm, and Z-axis travel of 200 mm. The machine includes an automatic tool changer with 10 stations and a clamping area of 420 x 125 mm. If you are looking to get high-quality machining capabilities, consider the EMCO PC MILL 125 vertical machining centre we have for sale. Contact us for further details. Csdpfxoy E S Uqe Aknoha • Tool changer: Automatic, 10 stations • Tool holder: SK 30 (DIN 2080 / DIN 69871) • Feed rate (X/Y/Z): 5–4000 mm/min • Rapid traverse: 4500 mm/min • Clamping area: 420 x 125 mm • Max. workpiece weight: 10 kg • Power supply: 230 V / 50 Hz Technical Specification Taper Size SK 30

Condition: excellent (used), Year of construction: 1999, Control system: Heidenhain TNC 426 Chsdpfx Aezqv A Tsknoa Travel ranges X/Y/Z: 1250 x 880 x 800 mm Spindle speed: 8,000 rpm Tool magazine for 60 tools, SK 50 Universal milling head +0° / -90° indexing NC rotary table 1250 x 1000 mm Chip conveyor Measuring probe

Condition: good (used), Manufacturer: Thyssen / Krupp Type: KHP 130 /125 Electrical Motor: Included (200 kW) Rotor diameter: 1.300mm Chjdpfx Aeg I R Ruoknsa Rotor width: 1.250mm Inlet: 1.370 x 990mm See PDF-file below for more detailed information. Included: – Inlet – Hydraulic system to open New spare-parts in stock.

Condition: good (used), Year of construction: 2008, lifting height: 3,670 mm, fuel type: electric, Empty weight: 790 kg Lifting capacity: 230 kg Working height: 567 cm CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Production country: FR Please contact Christian Theißen for more information Chjdpfjzp Dvfex Aknoa Manufacturer: JLG Model: 1230 ES Year of build: 2008 Condition: Used Data: Max. working height: 5,67 m Platform height: 3,67 m Platform lifting capacity: 230kg Platform dimensions LxW: 1,34 x 0,75 m Total dimensions LxWxH: 1,36 x 0,76 x 1,64 m Ground clearance: 0,06 m Drive type: Batterie Empty weight: 790kg Special features: white tires, maneuverable, very low weight, attachment points for personal protective equipment (PPE) available Location: 04435 Schkeuditz (Leipzig), immediately available

Condition: used, Milling spindle Manufacturer: HSD Type: ES 779L 4P 12.00 kW H1 HSD milling spindle 12 kW with tool changer and 6-position station for Kuka Quantec series Consisting of: 1 piece Water-cooled milling spindle with HSD ES779L 4P 12.00 kW H1 tool changer, liquid cooling 1 piece Tool station for 6 tools (tool changer station) with Leonie measuring station for checking the tools 1 piece Kuka Tech cabinet with KEB frequency inverter, control technology, and water cooler, Art. No. 00216249, Serial No. 0395009, year of manufacture 2018 Weight 360 kg 1 piece Hose package and connecting cable from the control cabinet to the HSD spindle. Chsdpfxowyay Ds Aknja Originally intended for a Kuka robot from the Quantec series; all mounting brackets and connections are included. 22726

Condition: used, cutting height (max.): 1,200 mm, cutting width (max.): 1,200 mm, cutting length (max.): 6,000 mm, spindle motor power: 5,000 W, fixed bench, pivoting head chain with diagonal vertical movement Chjdpfx Aoyzrcmsknea automatic cutting waste collection mat

Condition: ready for operation (used), Indramat MAC 71A-0-ES-2-C/095-A-1 permanent magnet synchronous motor, serial number as shown in the photo, mounting hole spacing: 92 x 92 mm, drive shaft diameter: 19 mm, used, with normal signs of wear, 100% functional. Csdpfx Aji D Iktsknsha

Condition: new, Röhm RPP-125-1 / GA parallel gripper, LA82x45, ID 170022, serial number B7952, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Cjdpfsi Ec Duex Akneha

Condition: new, Röhm RPP-125-1 / GA parallel gripper, LA82x45, ID 170022, serial number Z6653, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Codpfsi Ec D Aox Aknoha

Condition: new, Schunk SRH+40-WP /30061820 Pneumatic rotary indexing unit + 2 x part no. 125-1 / 30043071 Universal gripper, unused, 100% functional, scope of delivery as shown in the photos. Csdpfxei Ec Ngs Aknoha

Condition: ready for operation (used), Indramat MAC 071A-0-ES-2-C / 095-A-0, permanent magnet synchronous motor, serial number: 12254, used, shows significant signs of wear, 100% functional, scope of delivery as shown in the photos. Codpfx Aovy N Sqeknsha

Condition: ready for operation (used), Indramat MAC 071A-0-ES-2-C / 095-A-0, permanent magnet synchronous motor, serial number: 35588, professionally and completely refurbished and tested, with a 12-month warranty. 100% functional. Scope of supply as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please inquire about the price separately! Chjdoi D Ig Espfx Aknja

Condition: ready for operation (used), Röhm RPP-125-1 / GA parallel gripper, LA82x45, ID 170022, serial number X5017, used, shows normal signs of wear, 100% functional, scope of supply as shown in the photos. Cjdei Ec Dxspfx Aknsha

Condition: used, Year of construction: 2003, cutting width 78 cm feeding depth 78 cm feeding high max. 12 cm Cedpfx Akezgxb Djneha weight 1300 kg Dimensions (LxWxH) 192 x 155 x 145 Just about 560.000 cuts.

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, machine/vehicle number: 36567, total length: 8,000 mm, total width: 2,000 mm, total height: 2,500 mm, Weight approximately 21,000 kg Linear robot including peripherals and safety fencing available. Chodpfx Akezqagienoa A used machine from a site closure is being sold. Sale excludes all warranty claims for defects. The machine has not been inspected but was operational until the end.

Condition: used, Vötsch Type: NTUD 125/130/125 Pass-through oven Last maintenance: 3.12.25 Temperature control in 3 zones: Control of the internal temperature via an electronic temperature control system, divided into 3 separate temperature zones and controlled by semiconductor switching devices. This ensures good temperature uniformity whether operating in fresh or recirculated air mode. Temperature program control: The CTC control system is operated via a dialog PC with TSI software for the heating control of each temperature zone, as well as the activation of the recirculation fans and damper control. Horizontal airflow with reversal: By switching the electronically or pneumatically actuated dampers, the airflow direction can be set from left to right or right to left. The airflow direction for each of the 3 zones can be independently adjusted. Vertical airflow: By shifting a cover plate in the oven ceiling. Useful floor area: The floor area can be driven on using customer-provided loading trolleys. Recirculation fans: Each zone is equipped with a radial fan. Usable space dimensions: 1300 mm height / 1250 mm width / 1250 mm depth External dimensions: 2490 mm height / 1770 mm width / 1810 mm depth Volume: 2000 liters Connection rating: 400V(N)PE AC 50/60 Hz 22 kVA Rated current: 32 A Power: 18 kW Nominal temperature: 50 to 150°C Weight: 1000 kg Condition: used Scope of delivery: (See photo) (Specifications and data subject to change and errors excepted!) Chsdpfx Asy H Akroknea We are happy to answer any further questions by phone.

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood chips and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Can also be used for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Cedecnw U Djpfx Aknoha Large, mobile chip containers with clamping bracket and chip collection bag. The system is fully assembled upon delivery, allowing for quick deployment. Mobile. Filter description: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standard and tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of supply: Metal fan impeller. Inspection opening for cleaning the bypass filter. Connection cable 5 m with CEE plug 5-pole and phase inverter. 2 swivel castors and 2 fixed castors with parking brake. Preparation for connection of machine detection for up to 8 machines and slide valve controls. Manual cleaning. Sound pressure attenuator available as an accessory. Model: RLA 125 M Article no.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal volume flow: 1095 m³/h Max. volume flow: Vacuum at Vnenn: Filter area: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from the lower edge of the extraction port to the ground: 850 mm Weight: 194 kg Location: Arriving at warehouse 54634 Bitburg.

Condition: new, Year of construction: 2025, Table saw/router combination minimax twf 55 es M 3 UP Professional machine for skilled tradesmen, featuring motorized height and tilt adjustment of the router spindle, four speeds, and electronic control. Article number 5502266 Brand Holzkraft / SCM FEATURES Features Aluminum sliding table ✔ Handle on the sliding table ✔ Router fence FLEX ONE: heavy-duty professional version, automatic adjustment of the entire router fence depending on the tool diameter, manual adjustment of the chip removal, swing-away mechanism, aluminum fence jaws with connecting strips Spindle height adjustment motorized Telescopic miter fence with two folding stops Spindle tilt adjustment motorized Extension table ✔ Control Ready 3: Programmed movement of the routing unit in two axes, automatic adjustment of the entire router fence depending on the tool diameter, stepless adjustment via switch or automatic positioning system Arc routing guard ✔ Position of the controls Control panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg Width/Depth (product) approx. 2000mm Connection for dust extraction Dust extraction port diameter 2 x 120mm Work table Work table length 1200mm Sliding table length 1200mm Work table width 530mm Sliding table width 360mm Table height 900mm Sliding table height 142mm Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width/depth 2910mm Working area length 1600mm Explanation of space requirement The dimensions take into account maximum travel distances or usable lengths. Working area width/depth 2300mm Machine body length 1200mm Explanation of working area Please add the specified dimensions to the space requirement to obtain the recommended clear installation area for the machine. Electrical data Connection voltage 400V Power of drive motor 5.0kW Mains frequency 50Hz Cjdpjhp Rc Iofx Aknoha Router spindle Spindle tilt 0 to -45° Router spindle speed display Display on the control panel Usable spindle length 125mm Spindle arbor diameter 30mm Spindle speed(s) 3500/6000/8000/10000 min¯¹ Router tool diameter max. Tool diameter max. 240mm Tool diameter max. for profile routing 240mm Tool diameter max. for plunge routing 230mm

Condition: new, Year of construction: 2025, Woodworking Machines, Table Saws, Minimax twf55 es Article number: 5502261 Stable steel and cast iron construction Anodized aluminum format sliding table Large-sized cast iron milling head, swiveling up to -45° backwards Four milling speeds from 3500 to 10000 min¯¹ Right-left rotation as standard Display for height and inclination, accurate to 1/10 mm Fast and easy speed change via eccentric clamping Solid and precise cast iron table, stress-free and annealed for lasting precision Powerful 5.0 kW industrial motor Arc milling hood included Made in Italy Dimensions and Weights Length (product) approx. 1200 mm Width/Depth (product) approx. 2000 mm Weight (net) approx. 510 kg Dust extraction connection Dust extraction port diameter 2 x 120 mm Work table Work table length 1200 mm Work table width 530 mm Table height 900 mm Sliding table length 1200 mm Sliding table width 360 mm Sliding table height 142 mm Installation information Space requirement length 2800 mm Space requirement width/depth 2910 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Machine body length 1200 mm Chjdpfxji Dphts Aknoa Machine body width/depth 846 mm Working area length 1600 mm Working area width/depth 2300 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Electrical data Connection voltage 400 V Mains frequency 50 Hz Power of drive motor 5.0 kW Milling spindle Spindle inclination 0 to -45° Usable spindle length 125 mm Spindle speed(s) 3500/6000/8000/10000 min¯¹ Milling spindle speed display LED on the front of the machine Spindle arbor diameter 30 mm Milling tool diameter max. Tool diameter max. 240 mm Tool diameter max. with lowering 230 mm Tool diameter max. for profile milling 240 mm Tool diameter max. for mortise milling 320 mm EQUIPMENT Equipment Aluminum sliding table ✔ Milling fence Heavy-duty professional version with hold-down, protective cover and aluminum milling fence cheeks Telescopic miter fence with two folding stops Extension table ✔ Arc milling protection hood ✔ Eccentric clamp ✔ Handle on the sliding table ✔ Spindle height adjustment manual Spindle inclination adjustment manual Control manual height and swivel adjustment of the milling unit Position of control elements on the machine body Location: In stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Description Technical data Scope of delivery Accessories Optional equipment Ideal for demanding craftsmen and carpenters The particularly long, one-piece planing tables enable easy planing of workpieces. The work tables are made of gray cast iron, making them robust and permanently flat. Rear, simultaneously opening planing tables with spring support for quick and convenient adjustments. Thanks to the permanently mounted dust extraction hood, it is not necessary to disconnect and reconnect the dust extraction hose during adjustments, which saves valuable working time. The helically toothed steel infeed roller ensures a constant and uniform feed of the wood. The rubber outfeed roller at the end of the thicknesser ensures a uniform outfeed of the wood. Material feed with four speeds Thickness planer table adjustment via handwheel with integrated display for planer height DIGITAL version: with electric thickness planer table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures maximum precision and smooth operation. Preparation for long-hole drilling device Quality Made in Italy Chodpfxoff Hdpj Aknea Dimensions and weights Length approx. 2250 mm Width/depth approx. 1370 mm Weight approx. 695 kg Planer Total length of the tables 2250 mm Maximum chip removal 5 mm Fence length 1200 mm Fence height 150 mm Dust extraction connection Dust extraction nozzle diameter (thicknesser) 1 x 120 mm Drive power Main motor 7 kW Installation information Space required (length) 2250 mm Space required (width/depth) 1440 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Thicknesser Thickness planer table length 850 mm Thickness planer table width 520 mm Working height min. 3 mm Working height max. 240 mm Working length min. 220 mm Maximum chip removal 5 mm Electrical data Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Planing cutterhead Type TERSA Diameter 120 mm Number of planing knives 4 pcs Speed 5000 min¯¹ Planer width max. 520 mm Feed Speed 5/8/12/18 m/min