Used Cuccolini Vpb 500 1X for sale (19,521)

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, pulse welding system -Manufacturer: Esab, PULS MIG/MAG welding machine -Type: AristoMig 500W -Max. welding power: 500 A Knjdpfx Abjy Ulzisvsc -Features: Water-cooled -Wire feeder case: 4-roller drive Esab type AristoFeed 48-4 -Quantity: 3x Esab, PULS MIG/MAG welding machine available -Price: per piece -Dimensions: 1200/700/H1730 mm -Weight: 210 kg

Condition: good (used), functionality: fully functional, load capacity: 500 kg, Equipment: foot remote control, jlkajljödslf Knjdpfjvnz I Tjx Abvjc

Year of construction: 2016, condition: as good as new (ex-display), machine/vehicle number: KBK FFM, DEMAG KBK 2 - crane sky crane runway indoor crane Pictures shows an example crane runway with the below components. These are also available individually! Please ask your crane runway about your dimensions Payload / lifting capacity from 80 125 250 500 to 1000 Kg KBK 2-R turnouts left and right (with conductor rail) KBK 2-R swivel discs 890mm (with conductor rail) KBK 2-R rails curved 15 30 45 60 90 degrees (with conductor rail) KBK 2-R rails (with conductor rail) The system can be delivered completely according to your wishes Rails, rail connectors, trolleys, end plates, drag cables, holders/hangers, accessories are available Chain hoists on request Very good, almost new condition Knodpfommbn Tjx Abvsc Shipping by forwarding possible Demag KBK1 KBK2 and KBK3 rails are stock items!

Year of construction: 2008, condition: like new (used), Eillert MSD-500-V Salad spinner Serial: 188 2008, Stainless salad spinner, with three baskets, 1.5Kw, 3Ph Kodpfoit I Diex Abvsnc

Condition: new, Power 7,5 KW Receiver 500 L weight of the machine ca. 300 kg dimensions of the machine ca. 1,7x 0,6 x 1,45 m feed pressure 16 bar liter capacity 870 l Knjdpfx Aehid Ersbvsc The UWM 10/870/500 K50 + Startbox is equipped with a K50 pump. Note that this is a high-pressure version (especially for trucks or places where higher pressure is required), Industry and hard work. The starting box is used to obtain a lower starting voltage (around to reduce peak voltages. The UWM 10/870/500 is available with 400 V

Year of construction: 1996, condition: excellent (used), Welding rotary table Hamacher 500 KK, load capacity Speed continuously adjustable from 0.01 to approximately 2.0 RPM Height (horizontal) 800 mm, width 800 mm, length 1550 mm Kodpfxehadtuj Abvsnc Diameter of the clamping disc 800 mm

Condition: new, Year of construction: 2025, machine/vehicle number: 947526697, Frumecar ECA 500 fully mobile concrete batching plant Production capacity: 30 m³/h * 4 aggregate hoppers * Vertical-axis mixer TRH-750 with a capacity of 750 liters * The plant does not require any foundation and can be assembled in 1 day Knedpfxjhd I Sqe Abvec * 1-year guarantee from startup * Request a specific offer and technical details More machines and mixing plants are available on our website. Further information: Intended use: Construction, Applicable material: Concrete, General

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 480 mm 610 x 450 saw band length 5320 x 34 x 1,1 mm band speed 15 - 100 m/min table height 820 mm total power requirement 3,0 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,65 x 2,8 x 2,2 m For miter cuts up to 45° left in fully automatic Operation and up to 60° left in semi-automatic operation Material height sensor (automatic cut start detection) Automatic feed unit via ball screw with incremental feed automatic length compensation Button on the saw band for automatic adjustment of the saw stroke Fully automatic control of the saw frame and clamping device Hydraulic unit with automatic pressure shut-off when idling Mechanical chip clearing brush feed vice opening on both sides Remaining piece length 100 mm Modern CNC control freely programmable for multiple sawing jobs with various Cutting lengths and quantities. Automatic feed unit 500 mm via ball screw incremental feed with automatic length compensation. Adjustable for section lengths of 25 – 9,999mm. Fully hydraulic control of saw frames and clamping devices Preselection of 3 different material feed speeds Visualization of the entire workflow with simple data entry Kjdpfxsfu Nbbe Abvjnc

Condition: new, pressure 500 t column daylight 600 mm stroke 600 mm table surface area 3500 x1500 mm 600 mm feed down 8 mm/sec feed up 16 mm/sec travel on the bed 2200 x 900 mm total power requirement 30 kW weight of the machine ca. 28 t 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates are precision-milled using a CNC milling machine - Chrome-plated cylinder - Worktop with threaded holes HYDRAULICS - Bosch Rexroth hydraulic pump - Hydrapack or Badestons hydraulic directional control valve - Hydraulic block in accordance with EN standards - 1000-liter hydraulic oil tank - Pressure adjustment via pressure transmitter/regulator ELECTRICS - Control cabinet in accordance with EN standards - All cables are labeled and clearly arranged - All electrical components are from Siemens CONTROL PANEL - Stroke control in any position Knsdpfofv Awhox Abvec - X, Y, and Z-axis movement via remote control - Stroke adjustment via sensor SAFETY - The machine complies with the EC safety standards 2006/42/EC Machinery Directive, EN ISO 16092-01 and 16092-03 - Two-hand operation - Emergency stop button - Safety rope with switch around the press 4. TRANSPORT AND INSTALLATION – The price includes transport costs, installation, and training at the customer's factory. – Hydraulic oil is not included in the price. – All handling costs (e.g., crane, forklift, etc.) are borne by the buyer. 5. WARRANTY – The machine has a 2-year manufacturer's warranty. – This warranty covers the delivery of all spare parts required for repair and service of the machine. Damaged parts will be returned to the manufacturer after replacement with a new part. – This warranty does not cover parts damaged due to improper use.

Year of construction: 2026, condition: new, Josan PVC Mill 500 We also offer leasing and financing options. Feel free to ask us! ‼️ Net price only €18,999 ‼️ With our complete system, as shown in the picture, you can finely mill your plastics and feed them directly into the recycling process. Of course, we also have pre-shredders, crushers, and all other types of plastic recycling machines available. Whether you are a large company, medium-sized business, or small enterprise, with our expertise we can cater to your individual needs in the recycling sector with our machines! We have machines in stock in Heilbronn for live demonstrations! From copper granulation plants, shredders, and electrostatic separators (for example, to separate sand from plastic, copper from plastic, different types of plastics, etc.), so you can directly reuse clean material. Just ask us. We manufacture the appropriate system tailored to your needs. Unfortunately, our English is not perfect. You’re also welcome to speak to us in Swabian! Josan PVC Mill 500: ▶️ Throughput approx. 200 kg/h ▶️ Power 37 kW ▶️ 24 rotating and 13 fixed blades made from the hardest special steel alloy ▶️ All-inclusive as shown in picture ▶️ Weight approx. 1,200 kg Knodpeqvmn Nefx Abvjc Net price: €18,999.00 +19% VAT: €3,609.81 Gross price: €22,608.81 Subject to errors. Pictures/description may vary.

Condition: new, 0 1170 x 580 x 580 mm operating pressure 2,2 - 8,0 bar dimensions 1,22 x 0,93 x 1,70 m Knjdsupxd Depfx Abvoc air consumption at 6 bar 350 l/min weight of the machine ca. 0,15 t

Condition: excellent (used), mileage: 493 km, power: 368 kW (500.34 HP), first registration: 06/2024, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, operating hours: 1 h, Equipment: ABS, AdBlue, air conditioning, crane, cruise control, electric window regulation, fog lights, navigation system, power mirror, soot filter, spoiler, = Additional Options and Equipment = - Aluminum fuel tank - Leaf suspension - Power-assisted brakes - Low noise - Speed limiter - LED lights - Alloy wheels - Air horn - Particulate filter - Side skirts - Sun visor - Stability control - Power Take-Off (PTO) = Additional Information = Transmission Gearbox: I-Shift, automatic Ksdouxviqepfx Abvenc Axle Configuration Front axle 1: Alloy wheels; Steering Front axle 2: Alloy wheels; Steering Rear axle 1: Twin tires; Alloy wheels Rear axle 2: Twin tires; Alloy wheels Weights Unladen weight: 21,160 kg Functional Mast: Telescopic (8 sections) Mast length: 22 m Lifting capacity: 18,000 kg Lifting height: 2,200 cm Crane: HIAB X-HIPRO 548 E-8, mounted behind the cab Body manufacturer: HIAB X-HIPRO 548 E-8 CE mark: yes Condition Technical condition: very good Visual condition: very good NEW VOLVO FMX 500 8X4 WITH HIAB OPT25S56 ROLL-OFF TIPPER + HIAB X-HIPRO 548 E-8 CRANE EURO 6 L PACKAGE 500 HP DRIVE 8X4 AP AXLES LEAF SUSPENSION WHEELBASE 510 CM NEW FMX MODEL CAB WITH AIR CONDITIONING AUTOMATIC GEARBOX WITH ENGINE BRAKE ALCOA WHEELS HIAB 25 TON ROLL-OFF TIPPER TYPE: OPT25S56 ADJUSTABLE UNDER-RUN PROTECTION HIAB X-HIPRO 548 E-8 CRANE 8X HYDRAULIC EXTENSIONS RADIO REMOTE CONTROL 5TH AND 6TH FUNCTION ON THE CRANE OIL COOLER FOR CRANE HYDRAULICS MAX LIFTING CAPACITY 18,000 KG MAX WORKING HEIGHT 2,200 CM MAX LIFTING CAPACITY AT 1,960 CM 1,720 KG 4X OUTRIGGERS NEWLY FITTED UP TO 2023!!! 2 AVAILABLE FROM STOCK FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPANOL WE SPEAK ENGLISH

Condition: used, mileage: 636,939 km, power: 375 kW (509.86 HP), first registration: 09/2016, fuel type: diesel, empty load weight: 26,000 kg, axle configuration: 3 axles, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2016, CONFIDENTIAL NEGOTIATION The price does not include VAT and transfer of ownership. Knodoz R Er Aspfx Abvec We invite you to verify the characteristics of the published vehicle. Lodotruck s.r.l. disclaims any liability for any unintentional inconsistencies with the description in the ad.

Condition: good (used), Year of construction: 2011, spindle diameter: 40 mm, number of spindles: 7, Weinig Unimat 500 Year of manufacture: 2011 Planing width: 230 mm Knedpfx Aezzv Abjbvoc Planing height: 120 mm Spindle diameter: 40 mm Infeed table: 2,000 mm Number of rollers in the table: 2, driven with 150 mm width Feed rate: 5 - 30 m/min Feed motor: 5 kW Memory function: 3 sets of radially CNC-controlled adjustments for spindles 3, 5, and 6 Spindle arrangement: Bottom: 7.5 kW Right: Left: 7.5 kW Right: 5.5 kW Top: 7.5 kW Top: 7.5 kW Bottom: 11 kW

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, overall weight: 1,900 kg, Emmegi Twin Electra 500 double miter saw with 3 CNC-controlled axes Knedpfx Aoz Adywjbvec Cutting length 5000mm - longer in automatic mode, with automatic repositioning of the saw up to 10000mm Overhauled/like-new double miter saw with saw blades D=500 mm The machine can be motor-driven to swivel from 135 to 22.5 degrees and has a cycle control system. Software options for short cuts, macros, overlength cuts, crosscuts and cycle cuts are also available for this machine. Data transfer is possible (Orgadate, Schücal, etc.) Accessories: Moving roller conveyor, tensioner on roller conveyor, automatically extendable profile support between the heads.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 08/2013, total length: 8,440 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2013, Equipment: ABS, = Additional options and accessories = - Air Suspension - Disc brakes - Hydraulics - PTO = More information = Ksdpfjz Ahk Tsx Abvenc Axle configuration Tyre size: 385/65 R22.5 Make axles: Schmitz Brakes: disc brakes Suspension: air suspension Axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Axle 2: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Axle 3: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Weights Empty weight: 6.300 kg Carrying capacity: 32.700 kg GVW: 39.000 kg

Condition: good (used), Year of construction: 2000, functionality: fully functional, Very robust lathe with a rigid machine bed. Knodpsz D Dt Djfx Abvjc L + Z hollow spindle lathe Manufacturer: Grutzpe Model: 2000 / 500 Super AT Turning diameter: 1000 mm Distance between centers: 530 mm Hollow spindle diameter: 140 mm Distance between centers above the compound slide: 530 mm Turning length: 2000 mm Bed width: 420 mm Chuck diameter: 315 mm Bridge Dimensions: 6500 x 2200 x 2000 mm Weight: 10,000 kg Accessories: Various Further details: see images

Condition: used, functionality: fully functional, Parallel Lathe CAZENEUVE HB 500 Between points: 1000 mm Maxi Ø on bench: Ø 500 mm Kjdpfoz D Hrvex Abvenc Maxi Ø over saddle: Ø 190 mm Spindle diameter: Ø 42 mm Spindle speed: from 20 to 1600 RPM Turret: MULTIFIX type B 3-jaws chuck Ø 215 mm Threadings: Metric + Whitworth Tailstock: CM5 Scale: 2 axes NEWALL Recent electrical panel Supplied with 1 tool holder + 1 set of jaws Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2500 x 1400 x 1600 mm Weight: approx 2 T

Condition: used, Year of construction: 2013, operating hours: 73,000 h, functionality: fully functional, power: 7,130 kW (9,694.09 HP), output frequency: 50 Hz, nominal power: 7,130 kW (9,694.09 HP), continuous power: 7,130 kW (9,694.09 HP), rotational speed (max.): 1,500 rpm, motor manufacturer: M+M Turbinen-Technik, Evaporation pressure: 21 bar Knedpfxoz E Nh Ne Abvsc Steam pressure: 4.3 bar Temperature: Inlet 365 °C / Outlet 165 °C Generator: 8300 kWel Operating hours (annually): 8760 h/year Transformers included: Siemens Type 4GU6043-9HY Total operating hours: 73,000 h M+M turbines are typically custom-made industrial steam turbines used for combined heat and power (CHP) or for energy recovery from process steam. Due to the moderate inlet pressure and the relatively high outlet pressure, this is a back pressure steam turbine. It was designed for process steam systems to ensure efficient energy recovery and heat supply. The turbine was used in a paper mill to increase efficiency. With an output of 7.2 MW, this turbine is considered a medium-sized system in industrial applications. Thanks to the pressure ratios and the use of the turbine's exhaust steam, very little energy is lost. The estimated steam flow rate is 30 to 40 t/h. This enabled the paper mill to achieve an efficiency of 60% to 75%. The efficiency in CHP operation was approximately 75% to 85%. The turbine was designed for operation for 8,760 hours (full load year) with a maximum steam flow rate of 114 t/h. The turbine-generator unit supplies the paper machine with electricity at the 6 kV level. The process steam required for production is provided in two pressure stages. As the steam flows through the turbine, the steam pressure is reduced from 20 bar to 4.2 bar. If the turbine needs to be shut down for any reason, the process steam supply is provided via four pressure reducing stations connected in parallel.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 55,000 h, functionality: fully functional, clamping force: 5,000 kN, screw diameter: 90 mm, Clamping force 5000 kN Mould opening force, max. 279 kN Travel force movable platen opening 137,1 kN Travel force movable platen closing 116,8 kN Size of mould platens (h x v) 1370 x 1200 mm Distance between tie bars (h x v) 1000 x 800 mm Mould opening stroke 1170 mm Mould height min 480 mm Max. daylight 1650 mm Hydraulic ejector - stroke 250 mm Ejector force 95 kN Injection unit: Screw diameter 90 mm Ls/D ratio 20 Injection pressure 1839 bar Stroke volume 2290 ccm Shot weight (PS) 2084 gr. Injection rate 604 ccm/s Screw speed 195 1/min Plasticising rate max. 134,2 g/s Nozzle pressure 129,4 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 44 kW Adjustable barrel heating zones 7 Reservoir capacity 1175 ltr. Dimensions and weights: Dimensions of the machine ca. 8,00 x 2,52 x 2,40 m Total machine weight 28800 kg Max. mould weight 7900 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - 2 x core pull on fix plate - 2 x core pulls on movable plate - 8 x hotrunner controller - Robot interface according to Euromap 67 Kjdpfoz I Dvysx Abvjnc

Year of construction: 2019, condition: excellent (used), input voltage: 400 V, machine/vehicle number: 3365, BVL Yukon DAK-2 BL 500/400/4000, year of manufacture 2019, machine no. 3365. Two-track continuous washing system for aqueous cleaning and degreasing of shafts, followed by drying. The two washing tracks are separated by a partition and each has its own washing tank. The parts are cleaned on each track and then blown off/dried. The system was designed for integration into a production line with an on-site pallet conveying system. Technical data: - Two washing tanks, each with a capacity of 1,000 liters - Electric tank heater: 2 x 45 kW - Documented washing temperature range: 45-60 °C - Washing pumps: 2 x 4.0 kW; spray pressure 3.0 bar each - Coarse filter: 1 mm; bag filter: 50 µm per washing circuit - Usable length: 250 mm; usable width: 2 x 250 mm; usable height: 400 mm - Control system: Siemens SIMATIC S7-1500, CPU 1513-1 PN - Operator panel: Siemens TP700 Comfort - Operating voltage: 3 x 400 V, N+PE, 50 Hz Equipment: Knedpfxoz A Eidj Abvoc - Unheated drying with side-channel blower and blow-off fan per track - Automatic cleaner dosing and concentration monitoring via Libelle Cleaner Control - Condenser - Automatic cleaning of the blow-off zone - Nozzle system with quick-release fittings - Four viewing windows with internal lighting - Control panel on the support arm system Transport/installation dimensions according to the layout plan: 4,000 x 2,000 x 2,938 mm (L x W x H). Technical documentation available, including operating manual, layout plan, electrical and pneumatic diagrams, maintenance documents, spare parts lists and PLC project archive. Location: Waldmohr. Condition: very good (used). Price on request. Internal reference: 781461. Technical data according to available manufacturer documentation.

Condition: excellent (used), Year of construction: 2004, Arburg 320C 500-250 Year of manufacture: 2004 Injection unit: Screw diameter: 35 mm Shot weight: 121 g Injection pressure: 1,820 bar Shot volume: 144 cc Clamping unit: Clamping force: 50 t Tie bar spacing: 320x320 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Kedpsz Iqyfofx Abvjnc Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened – bimetallic Dimensions: Weight: 2,330 kg Length/Width/Height: 3.41x1.47x1.99 m Drive: Pump/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, tire size: 385/55-22,5, axle configuration: 6x2, wheelbase: 5,600 mm, fuel: diesel, fuel tank capacity: 610 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, suspension: air, loading space length: 65,000 mm, loading space width: 24,800 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, seat heater, soot filter, trailer coupling, - Aluminum fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors - Passenger seat - Differential lock - High beam headlights - Low noise - Speed limiter - Cabin - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air suspension - Air-sprung seats - Particulate filter - Radio/Multimedia system - Disc brakes - Sunroof - Sleeper cab - Seat heating - Sun visor - Lane keeping assist - Stability control - Auxiliary heater - Automatic heating system - Toolbox - Windshield Knedpfez I Rvtsx Abvjc - Additional steering axle Internal number for customer inquiries: 6-121 VOLVO FH 500 LL 6x2 CONTAINER CHASSIS WITH PALFINGER PK 53002-SH LOADING CRANE Vehicle available in black and white! Currently under construction, therefore reference images. Loading crane: Palfinger PK 53002-SH with 8 extensions, at 20.5 m this crane can still lift 1580 kg! Endless swivel range Double knuckle system (overextending boom up to 15 degrees) Palfinger stability control Radio remote control with linear levers and display of pressure values HPLS system (Extra Power) Outriggers can be operated via radio LED work lights and more Vehicle description: Volvo FH 500, new model Low-profile container chassis 2 pairs of extendable container locking devices, extendable to 3 m for accepting 20-foot containers 4 warning signs with lighting, extendable to 3 m Chassis dimensions 6,500 mm x 2,480 mm Side walls + rear wall 600 mm high Front wall 1,900 mm high Lashing eyes at a distance of approximately 250 mm Forklift protection Globetrotter safety cab, FH Diesel engine 13 l, 510 hp / 375 kW, 2550 Nm Exhaust emissions compliant with Euro 6E, with SCR, particulate filter and exhaust gas recirculation I-Shift, automated 12-speed transmission I-Shift driving modes: Standard, Performance and Economy Volvo Engine Brake (VEB+) Wheelbase 5,600 mm Drive 6x2 Differential lock Suspension air/air Front axle tires 385/55R22.5, driving axle tires 315/70R22.5, trailing axle tires 385/55R22.5 Trailer coupling Rockinger 400 G 150 LED headlights Rain sensor (sensor-controlled windshield wipers) Daytime running lights LED, "V-light" LED taillights, brake lights with emergency braking flash sequence Auxiliary air conditioning Auxiliary heater Driver's seat comfort, air-sprung, heated, seatbelt integrated into seat Leather steering wheel Multimedia/infotainment system with navigation Cool box with freezer compartment 33 L under bed Roof hatch, electrically operated, tinted glass Close-range camera on the passenger side for blind spot monitoring Adaptive cruise control (ACC) with collision warning and emergency braking function Lane keeping assist and more Financing / hire purchase, as well as leasing / partial amortization leasing is possible with our leasing partner. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes.

Condition: used, mileage: 238,000 km, power: 375 kW (509.86 HP), first registration: 06/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), had accident, navigation system, parking heater, soot filter, The vehicle has an engine failure. Main components: FH Globetrotter safety cab Wheelbase: 3,800 mm Chassis height: MED (medium) Diesel engine 12.8 l, 510 hp/375 kW, 2,550 Nm Rear axle RSS1352A, single reduction, 13 t axle load, GVW 52 t I-Shift AT2612, automated 12-speed transmission (direct gear), max. input torque: 2,652 Nm Drive axle ratio 2.47 : 1 Reinforced engine brake Volvo Engine Brake+ (VEB+) Aluminum rims Dura-Bright EVO (polished) Paint: 1103WHIT Winter White Rest cab FH, one bed Info and media package with navigation Driver comfort package Side collision avoidance and lane change assist (both sides) Close-range camera on the passenger side I-ParkCool (integrated parking air conditioning with automatic temperature control) Auxiliary drive PTR-DH (fast), gearbox side, connection: 1 DIN at the rear for pump Cab interior, living Driver's seat Comfort, air-suspended, heated, seatbelt integrated Two armrests on the driver's seat Armrests covered in leather Passenger seat Standard, fixed Foam comfort mattress for lower bunk, firm, foldable, with safety net Mattress topper Basic (20 mm) Storage space under the bunk Storage compartments above the bunk, capacity: 245 l Control panel (basic) on the bunk (interior light, auxiliary heater, sunroof, and door locking) Cool box 33 l, with freezer compartment, under the bunk Compartment under the dashboard with drawer Cup holders front and rear Make-up/shaving mirror Two flexible reading lamps Interior lighting with dimmer and red night lighting Side sun visor, driver side Sun visor inside, manual roller blind Roof window and emergency exit, can be opened manually (tinted glass) Curtains on windshield and windows 2 rubber floor mats Central locking with remote control Auxiliary heater for cab, 2 kW Automatic climate control with sun sensor Cab interior, driving Load/axle load indicator in the vehicle display Battery indicator in the display Steering wheel, leather version Steering wheel adjustment in height and inclination, with additional steering column adjustment Roof antenna and preparation for CB radio Digital tachograph, generation 4 Eco-Cruise-Control (cruise control) incl. brake cruise control Lane keeping assistant Battery pulse indicator Adaptive Cruise Control (ACC) with collision warning and emergency braking function Immobilizer, transponder in the key Gear/I-Shift operation via control unit on the driver's seat I-See with map-based topographic information (high resolution) Stationary trailer brake active up to max. 7 km/h Electronic Stability Program (ESP), basic with normal center of gravity Chassis Rear axle load (technical) max. 13 t Front axle load (technical) max. 7.5 t Parabolic suspension front, 2-leaf (normal stiffness) Air suspension rear, 4 air springs Three ride heights for air suspension 650 liter aluminum tank left 112 liter AdBlue tank right Kodpfx Abjz I Hthevsnc Single-battery system: one battery block (2 individual batteries) for the entire vehicle electrical system Two work lights rear/top on the cab, LED white Trailer detection with LED sensor Frame end chamfered Frame thickness 6.5 mm Frame profile height 266 mm Frame length rear 825 mm Extra spring accumulator on the front axle Disc brakes, solid discs on the steering axle Brake discs on the drive axle, solid, 410 mm diameter Air compressor 2-cylinder, 1,100 l/min Support bow (steel) for trailer connections behind the cab Saddle coupling SAF-Holland/GF, SK-S 36.20, cast 1 chock, foldable, position at the front Five pneumatic

Condition: excellent (used), Year of construction: 2010, operating hours: 5,285 h, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 105 W, type of cooling: air, total width: 1,240 mm, total height: 1,140 mm, total length: 1,920 mm, overall weight: 580 kg, travel distance X-axis: 1,245 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 610 mm, input current: 20 A, laser wavelength: 10,600 nm, input frequency: 50 Hz, Speedy 500 in good condition, coming from a model-making workshop. Few operating hours (5285 hours). Laser source replaced in late 2018 (Synrad firestar ti100; nominal 100 W, 151 W as a new part; 2392 hours of operating time). Power supply also replaced in 2018 (Meanwell RSP-2400). Last service: 08/2026 Extensive accessories included: Laser pointer for precise alignment of the workpiece 5.0" lens 2.0" lens Pass-through – for processing longer sheets Gas kit Cutting table Vacuum table Honeycomb table / aluminum honeycomb core for vacuum table Rotary engraving attachment – for bottles, glasses, etc. iCut software and camera (currently disassembled) Includes Mistral ECO 220V / 50HZ extraction system (motor relatively new). Kedpfx Ajz Eh Easbvenc Original new price: €86,708.58