Used Demag Injection Moulding Machines for sale (66,540)

Condition: used, Year of construction: 2015, Operating hours: 8877 Clamping force: approx. 180 t Number of components: 3 Lsdpfx Ajzlgkdoiforp Horizontal screw diameter: approx. 35 mm Vertical screw diameter: approx. 18 mm Core pull: 4 Special equipment: Rotary table / indexing plate Hot runner zones: 34 Frequency: 50 Hz Supply voltage: 400 V Approximate weight: approx. 10.1 + 0.6 t

Condition: used, Year of construction: 2015, Operating hours: 48039 Clamping force: approx. 180 t Number of components: 2 Horizontal screw diameter: approx. 35 mm Vertical screw diameter: approx. 18 mm Core pull: 4 Special equipment: Rotary table / indexing plate Lrsdpfjzlfmwex Aifjp Hot runner zones: 28 Frequency: 50 Hz Supply voltage: 400 V Weight: approx. 10.1 + 0.6 t

Condition: used, Year of construction: 2022, Operating hours: 45851 Clamping force: approx. 180 t Number of components: 2 Lrsdpfozlfl Hsx Aifep Horizontal screw diameter: approx. 35 mm Vertical screw diameter: approx. 18 mm Core pull: 4 Special equipment: Rotary table / indexing plate Hot runner zones: 28 Frequency: 50 Hz Supply voltage: 400 V Weight: approx. 10.1 + 0.6 t

Condition: used, Year of construction: 2015, Operating hours: 39326 Clamping force: approx. 100 t Number of components: 1 Lodpfx Aezlffyoifjrp Tie bar spacing: Tie-bar-less Horizontal screw diameter: approx. 40 mm Core pull: 0 Hot runner zones: 4 Clamping system: Toggle (KH) Max. stroke: approx. 175.0 mm Screw speed: approx. 420 rpm Heating zones: 4 Heating power zone 1: approx. 4.23 kW Heating power zone 2: approx. 3.00 kW Heating power zone 3: approx. 3.00 kW Heating power zone 4: approx. 3.00 kW Injection servo: No Measuring system: Incremental encoder Pressure sensor type: Diaphragm Temperature control: J-type thermocouple

Condition: used, Year of construction: 2017, Operating hours: 22,800 Frequency: 50 Hz Lrodpfxjzlfc Ee Aifjp Supply voltage: 400 V Weight: approx. 26.8 t

Condition: used, Year of construction: 2022, Lot consists of: (1) Injection molding machine, temperature control: HB Therm | Miscellaneous: 1x conveyor unit by Motan Technical Details: Power supply: AC400V 3P/N/PE Frequency (Hz): 50 Current (A): 228 Installed power (kW): 137 Motor power (kW): 63.5 Heating power (kW): 33 Short-circuit rating (kA): 25 Screw diameter (mm): 65 Injection unit: 2230 Machine weight (t): 22.0 Ledpfx Aoy N R Htoifjrp

Condition: used, Year of construction: 2005, Manufacturer: KRAUSS MAFFEI, Type: 1600-8100-1400MX, Year of manufacture: 2005, Serial No. 61007140, Control system: Krauss Maffei MC5, Clamping force: 1,600 t, 2 injection units, Minimum/maximum mold height: 700/1,600 mm, Platen spacing: 3,400 mm, Clear opening horizontal/vertical: 1,850/1,400 mm, 12 cascades, 48 hot runner nozzles, Core pulls hydr. 5 (DS) 5 (AS), Screw diameter: 105/60 mm, Injection weight: 4,100/600 g, Part removal robot, Manufacturer: Krauss Maffei, Belt conveyor, approx. 5,000 x 1,400 mm +++ Attention: Machine is part of an online auction! +++ Lodpfjzn Aqfsx Aiferp

Condition: used, Year of construction: 2016, Manufacturer: KRAUSS MAFFEI, Type: KM 850-6100/1400 MXZ Blue Power, Year of manufacture: 2016, Serial number: 61024868, Control system: Krauss Maffei MC5, Clamping force: 850 t, 2 injection units, Rotary table, Installation height min./max. 500/960 mm, Daylight opening 1,120 mm, 48 hot runner nozzles, hydraulic core pull systems 2 (DS) 3 (AS), Screw diameter 95/60 mm, Shot weight 3,200/500 g, Parts removal robot, Manufacturer: Krauss Maffei, Type LRX350, Year of manufacture: 2016, Serial number: 2114889, Conveyor belt, 3,000 x 800 mm Lrodjzn Ap Iepfx Aifsp 37,544 hours (25,846 net production hours) Note: Machine is part of an online auction!

Condition: used, Year of construction: 2007, Manufacturer: KRAUSS MAFFEI, Type: KM350-1900 C2, Year of manufacture: 2007, Serial no. 61009348, Control system, Manufacturer: Krauss Maffei MC5, Clamping force: 350 t, Screw diameter: 60 mm, Die opening: 1,450 mm, Clear opening horizontal/vertical: 710/710 mm, 6 cascades, 16 hot runner nozzles, 2 hydraulic core pullers per side (DS/AS), Shot weight: 700 g, Parts removal robot, Manufacturer: Sepro, Type SR4020S3, Year of manufacture: 2005, Serial no. P12424 47,952 hours (30,821 pure production hours) +++ Attention: Machine is part of an online auction! +++ Lrjdpfx Aijzn Amysfjp

Condition: used, Year of construction: 2018, Serial no. 221921, control system, manufacturer Engel, type CC300, clamping force 1,700 t, 2 injection units, rotary table, installation height min./max. 800 - 1,600 mm, platen distance 3,350 mm, clear width horizontal/vertical 1,850 / 1,415 mm, 16 cascades, 64 hot runner nozzles, core pulls hydr. 4 (DS) / 4 (AS), screw diameter 105 / 50 mm, shot weight 4,050 / 410 g, operating hours 22,401, machine weight 75,400 kg, mold temperature control unit, manufacturer Oni, type Rhytemper FlexControl 32, 4x 8-channel block modules 125 °C, 6-channel block modules 125 °C, visualization unit, parts removal handling system, manufacturer Engel, type Viper 60, 5 axes (X, Y, Z, C, B axis), nozzle spacing 300 mm, year of manufacture 2018, serial no. 221938, part enclosure, discharge conveyor, mobile conveyor, manufacturer Engel, type BGR FB100 KMAT, year of manufacture 2018, serial no. 2144098, length approx. 4,200 mm, width 1,000 mm, external temperature control unit and material dosing system are not included in this item. Damages: hydraulic hoses leaking. +++ Attention: Machine is part of an online auction! +++ Ljdpoy I R Tqofx Aifsrp

Condition: used, Year of construction: 1998, operating hours: 98,806 h, clamping force: 40,000 kN, screw diameter: 130 mm, injection weight: 8,100 g, total length: 4,900 mm, total height: 4,200 mm, overall weight: 255,000 kg, 2x KraussMaffei KM 4000-19000 MC – Injection Moulding Machines – Year 1998 For sale are two identical injection moulding machines manufactured by KraussMaffei, model KM 4000-19000 MC equipped with MC3F control system. These machines are particularly suitable for producing large plastic components that require very high clamping force. The systems are fully equipped and include several peripheral devices for material feeding and process control. ## Technical Data * Manufacturer: KraussMaffei * Model: KM 4000-19000 MC * Control: MC3F * Year of manufacture: 1998 * Operating hours: approx. 98,806 h * Clamping force: 40,000 kN * Maximum shot weight: 8,100 g * Screw diameter: 130 mm ## Dimensions & Weight * Machine depth: 4,900 mm * Machine height: 4,200 mm * Machine weight: approx. 255,000 kg ## Equipment * Robot interface: KUKA KRC4 * Sequential injection controller: S.I.S.E. IS-Tech * Temperature control units: GWK * Dosing and mixing system: Motan Colormetric * Belt conveyor ## Available Machines * Machine No. 14 * Machine No. 15 Lrodjyt Hy Nopfx Aifjp The machines can be purchased individually or as a package. Inspection by appointment is possible.

Condition: used, Year of construction: 1998, operating hours: 99,161 h, clamping force: 32,000 kN, screw diameter: 130 mm, injection weight: 8,100 g, total length: 4,900 mm, total height: 4,200 mm, overall weight: 230,000 kg, # Sales Description A high-performance injection molding machine from the German manufacturer KraussMaffei is available for sale. This is the KM 3200-19000 MC model, specifically designed for the production of large-sized plastic components and industrial series manufacturing. The machine offers very high clamping force and is particularly suitable for applications involving technical plastic parts or large-scale items. The machine features a clamping force of 32,000 kN, a screw diameter of 130 mm, and a maximum shot weight of 8,100 g. This allows for the efficient production of large parts with high material requirements. In addition, the system is equipped with extensive peripheral equipment, including a robot interface for KUKA KRC4, a S.I.S.E. IS’Tech sequential injection controller, GWK temperature control units, and a Motan Colormetric dosing and mixing system. A belt conveyor is also included in the package. Technical Data * Manufacturer: KraussMaffei * Model: KM 3200-19000 MC * Machine No.: IMM MC3F No.12 * Year of manufacture: 1998 * Operating hours: approx. 99,161 h Performance * Clamping force: 32,000 kN * Screw diameter: 130 mm * Max. shot weight: 8,100 g Dimensions and Weight * Machine weight: approx. 230,000 kg * Machine depth: approx. 4,900 mm Ljdpfxoyt H Dhe Aiferp * Machine height: approx. 4,200 mm The machine represents a robust and proven solution for industrial plastics processing and is especially suitable for manufacturers requiring large-format injection molding capacity. Further information, photos, or inspection appointments are available upon request.

Condition: good (used), Year of construction: 1992, Spray machine -Closing force: 25 tons Lrjdeb A H Rnjpfx Aifep -Screw diameter: 22 mm -Unilog 2040 control unit -Slat spacing: 250x250 mm -Data collection terminal -Parts removal device, manufacturer ASS -Temperature control unit, manufacturer Single

Condition: ready for operation (used), Year of construction: 1996, operating hours: 105,386 h, functionality: unexamined, machine/vehicle number: 30131, total length: 8,000 mm, total width: 2,000 mm, total height: 2,500 mm, overall weight: 20,000 kg, Equipment: documentation/manual, A used machine from a site closure is being sold. Sale is made with the exclusion of any warranty for defects. The machine has not been inspected but was operational until the end. A linear robot is included, but it has never been used and was probably not programmed. Lrsdpjzmrf Nofx Aifop

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 161729, clamping force: 1,000 kN, screw diameter: 40 mm, injection weight: 158 g, ejector force: 40,000 N, total length: 4,225 mm, total width: 1,370 mm, total height: 1,200 mm, overall weight: 3,080 kg, heating capacity: 5.5 kW (7.48 HP), pump power: 18,500 W, power: 24.3 kW (33.04 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 380 V, input current: 96 A, Equipment: documentation/manual, We are offering this used Arburg 370M 1000-250 injection moulding machine, year of manufacture 1994. Serial number: 161729 Year: 1994 Operating voltage: 380 V 3~ 50 Hz Control voltage (230 V): 220 V ~ 50 Hz Control circuit voltage: 24 V = Total rated current: 96.00 A Total connected load: 55.0 kW Ledpfx Aijyrczgefsrp Drive upgraded to xD card! If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: refurbished (used), operating hours: 35,498 h, functionality: fully functional, DEMAG D325 – 1590 NC III Year of manufacture: 1991 Control system: NCIII Screw diameter: 70 mm Injection volume: 960 cm³ / 860 g (70 mm) Clamping force: 3250 kN Tie-bar spacing: 630 mm x 630 mm Minimum mould height: 330 mm – 770 mm Mould opening stroke: 600 mm Ejector stroke: 200 mm Ledezma Avjpfx Aiferp Core pull: 2 circuits Pneumatic valve: 1x Robot interface Equipment: Core pull, 2-circuit / Robot interface, 2-circuit Pneumatic valve 5/2 No.1 on moving platen Pneumatic valve 5/2 No.2 on moving platen Clamping force controlled Handling interface, Euromap 12 (32-pin) robot interface Mould protection interface (ejector plate safety) Integrated hot runner control, 12 zones Mould protection Plug combination for electrical connection

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 244136, clamping force: 3,200 kN, screw diameter: 55 mm, clearance between the columns: 720 mm, displacement volume: 570 cm³, injection pressure: 2,000 bar, injection weight: 521 g, mold height (min.): 300 mm, total length: 7,460 mm, total width: 1,848 mm, total height: 2,267 mm, overall weight: 20,000 kg, For sale is an injection molding machine from the manufacturer Arburg, type 720 H 3200 - 1300, from 2018. The machine is in very good condition. Clamping force: max. 3,200 kN Mold opening force: max. 110 kN Opening stroke: max. 600 mm Mold height (variable): 300 mm to 800 mm Platen distance (variable): max. 900 mm to 1,400 mm Distance between tie bars (H x V): 720 mm × 720 mm Size of the mounting platens (H x V): 1,040 mm × 1,040 mm Max. weight of the moving mold half: 2,900 kg Ejector force | Stroke: max. 86 kN | 250 mm Screw diameter: 55 mm Effective screw length (L/D): 22 Maximum screw stroke: 240 mm Calculated stroke volume: 570 cm³ Maximum shot weight (in polystyrene/PS): 521 g Maximum injection pressure (holding pressure): 2,000 bar Maximum material throughput (PS): 86 kg/h Maximum injection flow rate: 713 cm³/s Specific injection pressure (max.): 2,000 bar Nozzle closing force | Stroke (max.): 90 kN | 550 mm Heating power / Heating zones: 22.9 kW | 8 zones 3. Connection values & machine weights Net weight of the machine (without oil): 18,550 kg Lodpezl Tc Tjfx Aiforp Oil capacity (hydraulics): 410 liters Cooling water connection: max. 30 °C | min. 1.5 bar differential pressure (Δp) | Nominal size DN 25 Drive power (pump motor): max. 60 kW Total connection power (electrical at 400V/50Hz): 84 kW Max. current / Fuse rating: Machine total: 125 A Heater: 40 A Upon request, transport and loading can be arranged for an additional fee, throughout Europe. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange is possible! Machine Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Gjbn N Ay Dowza Dxogoil Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: new, Year of construction: 2005, screw size 60 mm injection shot weight in Polysterol 607 g/PS closing pressure 3200 kN Control SELOGICA mould space 300 mm clamping plate 1040 x 1040 mm opening stroke 700 mm total power requirement 96 kW weight of the machine ca. 17 t dimensions of the machine ca. 7 x 2.2 x 2.3 m Lrodjvkqfaopfx Aifep This plastic injection moulding machine is in very good condition, can be inspected by can be inspected at the seller's premises by prior arrangement and is supplied incl. Multilift H. Operating hours: 42878h

Condition: ready for operation (used), Year of construction: 1997, operating hours: 113,881 h, functionality: unexamined, machine/vehicle number: 32833, total length: 6,500 mm, total width: 2,000 mm, total height: 2,200 mm, overall weight: 11,500 kg, For sale is a used machine from a site closure. Lredpfxezl S Rpe Aifjp Sale is made with the exclusion of any warranty for defects. The machine has not been inspected but was in working order until the end.

Condition: used, Year of construction: 2017, operating hours: 38,672 h, machine/vehicle number: 214631, overall weight: 1,200 kg, This ENGEL Insert 500V/160 rotary vertical injection molding machine will be auctioned off online as part of our industrial auction/machine auction, location closure of J&S GmbH Automotive Technology - injection molding machines. You can find this and many other items on our platform. Year of manufacture: 2017 Lredpfezk Hg Nsx Aifep Serial number: 214631 Weight: 1,200 kg Operating hours: 38,672 hours (as of 02/2025, continued operation until 12/2025) with rotary platen with 2 x Single STL 1-12-30 TKN6, year of manufacture 2012/2013 with Piovan C5, year of manufacture 2017 with Piovan THW9 temperature control unit with Piovan MDP, year of manufacture 2013 with Universal Robots UR10e handling robot Functionality and technical data have not been verified without additional items/without additional accessories, unless explicitly stated as part of the item WE STRONGLY RECOMMEND ATTENDING THE INSPECTION! Subject to reservation This lot will be auctioned off subject to reservation. After the auction closes, the seller will notify within 2 weeks whether or not the highest bid will be accepted. We will inform you promptly.

Condition: excellent (used), Year of construction: 2006, operating hours: 33,108 h, functionality: fully functional, clamping force: 1,300 kN, screw diameter: 25 mm, displacement volume: 79 cm³, injection pressure: 2,398 bar, ejector force: 6,100 N, ejector stroke: 100 mm, opening stroke: 606 mm, plate length: 750 mm, plate width: 850 mm, overall weight: 10,600 kg, Equipment: documentation/manual, You can find more Engel machines on our website: Maschinen-Handel . eu Lsdpst A Ui Aefx Aiforp Technical details: Manufacturer: Engel Model: V 330H/80V/130 Combi Cleanroom Year of manufacture: 2006 Operating hours: 33,107 h Screw diameters: 25/22 mm Machine weight: 10,600 kg Additional equipment included: GEKU SR 500 ST robot Safety cage Turntable The machine has operated for approximately 33,107 hours in automatic mode.

Year of construction: 1999, condition: excellent (used), INJECTION MOLDING MACHINE KRAUSS-MAFFAI 150-700 C1 Year of manufacture: 1999 Screw diameter: 55 mm In excellent condition, still in operation. Lrsdpfxoh S Dnco Aifjp

Condition: good (used), Year of construction: 2002, functionality: fully functional, Clamping force: 500 kN Platen size: 540 x 540 mm Tool opening stroke: 350 mm Lredpfx Aiszg T I Sjfsp Minimum tool mounting height: 200 mm Screw diameter: 30 mm Injection pressure: 2025 bar Displacement volume: 74 cm³ Opening width: 500 mm Ejector stroke: 100 mm Total weight: approx. 2,300 kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 135 mm, displacement volume: 8,870 cm³, injection pressure: 1,640 bar, Stock No.: 503583 Manufacturer: ENGEL Type: ES 16050-800 DUO Controller: CC 200 Year of manufacture: 2007 Operating hours: 91708 h Technical Data, Clamping Unit Clamping force: 8000 kN Tie bar distance h x v: 1170 x 1000 mm Platen size h x v: 1550 x 1520 mm Minimum mounting height: 500 mm Maximum mounting height: 1100 mm Maximum platen distance: 2100 mm Opening stroke: 1600 mm Ejector stroke: 300 mm Ejector force: 180 kN Centering of moving platen D: 200 mm Centering of fixed platen D: 200 mm Tool weight: 21600 kg Technical Data, Injection Unit Screw diameter: 135 mm Injection volume: 8870 ccm Injection pressure: 1640 bar Screw length: 22 l/d Screw stroke: 620 mm Screw speed: 100 rpm Screw torque: 14000 N Free injection flow rate: 1245 g/s PS Number of heating zones: 7 Nozzle stroke: 950 mm Ledjzgt Rtjpfx Aiforp Dimensions & Weight Machine dimensions L x W x H: 11.81 m x 3.2 m x 2.9 m Total weight: 56000 KG Equipment Screen text German Screen text English CEE socket 16A CEE socket 16A CEE socket 16A Compact Flash drive Hydraulic core pull 1x Machine including handling system Machine including safety enclosure Machine with water manifold Interface EUROMAP 12 Interface for handling system USB interface Tool heating 16x Technical Data, Handling System Machine type: Linear Manufacturer: ENGEL Controller: ERC 64/1-F Year of manufacture: 2007 Handling system weight: 25 kg X-axis: 1300 mm Y-axis: 2200 mm Z-axis: 4760 mm

Condition: ready for operation (used), Year of construction: 2005, operating hours: 59,000 h, clamping force: 4,200 kN, screw diameter: 60 mm, displacement volume: 769 cm³, injection pressure: 2,200 bar, total length: 6,830 mm, total width: 2,330 mm, total height: 2,480 mm, overall weight: 23,090 kg, Clamping force: 4200 kN Tie bar spacing (H x V): 800 x 800 mm Platen size (H x V): 1270 x 1200 mm Min. installation height: 580 mm Max. platen distance: 1300 mm Opening stroke: 720 mm Screw diameter: 60 mm Shot volume: 769 ccm Lredpfezgt Niox Aifop Injection pressure: 2200 bar Equipment Display language: German Hydraulic core pull 4x Machine without handling Machine without material hopper Levelling elements Mould heating 12x Machine dimensions (LxWxH): 6.83m x 2.33m x 2.48m Total weight: 23090 kg