Used Dmmet Group Single Panel for sale (20,923)

Condition: excellent (used), functionality: fully functional, machine/vehicle number: G01747, Turning diameter over bed : 500 mm Turning diameter over slide : 280 mm Workpiece length : 2000 mm X-axis travel range : 280 mm Z axis travel range : 1935 mm Rotation speed : 3000 rpm/min Spindle tip : A2-8 Spindle flight : 82mm X / Z accelerated feed : 4/6 m/min Tailstock sleeve diameter : 75 mm Tailstock taper : MT5 Main spindle motor : 11/15 kW Tool shank size : 25x25 mm Tailstock step : 150 mm Positioning accuracy of the X/Z axis (C, Y) : 0,018/0,021 mm Rodpfx Aevfdiuebgsw Repeatability accuracy of the X/Z axis (C, Y) : 0,014 mm Weight : 2800 kg

Condition: excellent (used), Year of construction: 2018, operating hours: 10 h, functionality: fully functional, Automatic toilet paper and kitchen towel packing machine We have used it for less than 10 hours. After purchase, it did only a couple of test runs and then was stored in a dry warehouse for later use. It had never been used since. There might be some bends on the machine since it has been moved a couple of times. Rodpjuyhf Hjfx Abgsw Specification Power 220V 50Hz Packing: Toilet paper 2/4/6/8/10 rolls per pack with handle, Hand towel 2/4 rolls per pack with handle Packing in film, overwrapping with meld line on the back. It uses opp film, a max roll diameter of 30cm, and a thickness of 0.03 - 0.10 by the specification, no idea about other materials - have not tested any. For setting up and configuration the machine you will have to contact the manufacturer The machine can be seen, powered on, and set to automatic/manual running. User manual is available, have videos from the manufacturer only

Condition: new, functionality: fully functional, empty load weight: 1,640 kg, lifting power: 1,500 kg/m, lifting height: 9,500 mm, Year of construction: 2026, New Mobile Crane SINGLE LIFT CMC 1500 – BRAND NEW Glasslift is an authorized distributor of BG LIFT, UNIC, and SINGLE LIFT mini cranes, SCHMALZ and RIGHETTI vacuum lifters, SMARTLIFT manipulators, PAUS roofing cranes, and CELA Spyder-type aerial platforms. We are also part of the GGR GROUP and have introduced our own line of GLW transport carts. Thanks to our extensive range of equipment, we select machinery tailored to the specific requirements of each job, offering machines that fulfil our clients’ needs. At Glasslift, we not only execute projects but also supply the tools necessary for their efficient implementation. In addition to sales, we also offer short- and long-term rentals of the above-mentioned equipment. Glasslift is a team of professional operators specializing in comprehensive glass installation, steel handling, and manipulation of structural components. Our team of experienced professionals has an excellent understanding of their areas of expertise, is highly qualified, and each of our operators is fully committed to the projects entrusted to them. We possess the required skills, technical know-how, and professional qualifications, so you can trust us with confidence. Our capabilities are backed by positive references, testimonials, and publications about our company, which underline our reliability and professionalism. Cooperate with the best to ensure comprehensive and effective project execution. For sale: BRAND NEW Single Lift Cramic CMC 1500 mini crane with Pick and Carry function. By purchasing from the exclusive distributor, you are assured of machine quality, spare parts availability, and service support. Basic information: • Jib reach with searcher hook (8.20 m) and with hydraulic jib (9.5 m) • Maximum lifting capacity: 1,500 kg • Own weight: 1,640 kg • The first mini-crane of this size with an articulated jib (JIB) • Transport dimensions: 239.1 cm (length), 167 cm (height), and 85.9 cm (width) • 360-degree boom rotation • Four extendable (vertical) outriggers for stabilization on difficult terrain Rsdeyhprdspfx Abgew • Possibility to mount a suction beam with a 600 kg, 800 kg, or 1,200 kg lifting capacity, or for bent glass up to 800 kg • Extendable tracks allowing safe operation on the most challenging terrain - passage width: 84.9 cm, maximum width with extended tracks: 152.5 cm • Option to mount a personnel basket with a 300 kg load capacity • Battery power for outdoor operation, as well as both battery and 220V mains power for indoor use • Manipulator options: manual slew and tilt, automatic slew with manual tilt, or fully automatic slew and tilt Machine import included in the price. Please contact us by phone for an individual price quotation for any configuration. Availability of genuine spare parts directly from the manufacturer. Service centre located in the heart of Poland at the A1 and A2 motorway junction near Łódź, at the GLASSLIFT SP. Z O.O. equipment base. VAT invoice available.

Condition: ready for operation (used), PANEL SAW Redpsyt E R Hjfx Abgow Carriage length: 1600 mm Cutting height: 75 mm Scoring unit Tilting saw unit up to 45° Manual raising and lowering of the saw blade SPINDLE MOULDER Spindle diameter: 30 mm Spindle height: 90 mm Manual spindle raise and lower Speeds: 3500/6000/8000 rpm SURFACE & THICKNESS PLANER Working width: 300 mm Maximum thicknesser height: 200 mm 3-knife cutterhead Conventional knives HORIZONTAL DRILLING MACHINE 550 kg 220 V Year: 2016

Condition: good (used), Year of construction: 1998, Tire repair machine Rsdpfx Aefcy Drobgjw Make: Single Type: STW 1-6-25-ZN Year of manufacture: approx. 1998

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: N1A665853, tool weight: 30,000 g, input voltage: 400 V, Machining center Rumba -4 axes Machining length 4000 mm Ppsbtxbqohywz So H Ijr CNC controlled machining center with vertical machining spindle, suitable for machining extruded aluminum profiles, light metals, PVC and steel from 3 sides. Controlled tilting work table: -90°/0°/+90° with intermediate angles. The machine is equipped with a 4Kw, 18000 rpm electrospindle, controlled by an inverter and a quick tool changer (tool changer) with an ISO30 spindle. Interpolation of the X, Y, Z and W axes controlled numerically. Brushless motors for positioning the X, Y, Z and W axes. Complete with 4 pneumatic double clamps, tool diameter correction by software. Axis movements on linear guides. Left profile stop. 10.4-inch color monitor (touch screen with simplified Windows-based graphics, Teamviewer for remote maintenance, special software HICAM 2 / CAMPROX for loading ISO files and running programs). Possibility to edit longer parts. Standard equipment: 4kw ISO30 electrospindle 4 pneumatic clamps (manually adjustable) Safety cover Automatic tool changer (10 tools) 4x ISO30 cone included with the tool 3x chip collection compartments air nozzle Technical data: X-axis stroke 3000 mm / 4000 mm Redpfx Abewgm Ibjgew Y-axis stroke 400 mm Z-axis stroke 300 mm Rapid traverse (X, Y, Z): 50 m/1' Acceleration (X, Y, Z): 1.5 m/s2 Electric spindle: 6.6 kW HSK63 Spindle cooling: Air, liquid cooling Max. tool length: 130 mm Max. tool diameter: 140 mm (blade) Working pressure: 7bar Weight: 2500kg

Condition: used, Year of construction: 2022, machine/vehicle number: 15084, functionality: fully functional, cutting width (max.): 420 mm, empty load weight: 3,100 kg, cutting length (max.): 200 mm, saw blade length: 5,500 mm, motor model: IE3, Equipment: documentation/manual, SECOND-HAND TS 400 THIN CUTTING HORIZONTAL BANDSAW CE RULES TECHNICAL DATA: SPECIAL DEVICE "OFFSET": DEVICE "DOUBLE SPEED": - Max. cutting capacity 420x200 mm - Distance from blade to conveyor 2-150mm - Min. cutting thickness from the top 0.75 mm - Saw wheel diam. 800 mm. - Saw wheel thickness 50 mm - Sawblade length 5500 mm. - Sawblade width 50 mm. - Sawblade speed 17-34 m/s - Conveyor belt size 400x4200mm - Oil mist cooling system - High accuracy hydraulic blade tension system (2500 kg) - Variable feed speed 0-25 m/min - Feed motor 2HP with inverter - Main motor 30 HP with inverter - Blade lift motor 2 HP - Dust hood outlet diam. 125 mm x 2 Rsdjyam U Tepfx Abgsw - Machine net weight Kg. 3100 - Air loaded pressure roller - Slow cutting start function - Spraying jets for blade lubrication - Motor IE3 INCLUDED - S/N 15084 - Year 2022

Condition: reconditioned (used), Year of construction: 2006, BACCIOTTINI Group Pit Stop AF Speed, year 2006: automatic creasing and perforating machine in excellent condition. The machine will be overhauled at Bacciottini Group srl's facilities. Robust construction and reliable performance. The machine is equipped with a NEW standard V-Shape creasing kit and a 100 cm extension. All other optional tools currently available can be added: digital creasing kit, standard perforating kit (2/1, 3/1, 4/1), or micro-perforation kit. Technical specifications: - Maximum format: 50 x 70 cm (50 x 100 cm with extension) - Minimum format: 8 x 15 cm - Paper weight: from 80 to 600 gsm - Minimum creasing distance: 0.1 mm - Programming: 200 programs with 100 creases per program - Power supply: 400 Volt three-phase 50 Hz - Power requirement: 3.5 kW This has been our best-selling model for years and continues to be appreciated worldwide for its quality and reliability. Redpsyk Utxofx Abgow The attached photos are from our catalogue and do not specifically refer to the machine being offered.

Condition: as good as new (ex-display), Bacciottini Group OXO MULTI SKILL, machine from showroom. OXO MULTISKILL is a compact creasing and folding machine with automatic non-stop loading feeder With few simple operations OXO MULTISKILL can switch from a normal creasing machine to a creasing/folding unit. Once in the folding machine mode after the fold type, sheet length and paper thickness have been selected, the machine adjusts automatically ready for production. Additional supplementary creases can be added along with ones necessary for the folding of a product. It allows a quick tool change over from the creasing to perforating just in a few seconds. TECHNICAL FEATURES: Minimum size in creasing: 8×10 cm | folding: 8×15 cm Maximum size in creasing and/or in folding 50×70 cm (with optional extension feeder 50×100 cm) – minimum and maximum size can change depending on the kind of fold Sheet weight in creasing: from 80 to 600 g.s.m. in folding: from 80 to 400 g.s.m.; from 0.08 mm to 0.4 mm of thickness – variable according to the quality of the paper Min. distance creasing 0.1 mm between creases | 0.1 mm from front edge | 0.1 mm from tail edge Production A4 in creasing: 9,000 sheets per hour (with 1 crease.) | in folding: 9,000 sheets per hour (with a single fold) Maximum number of creases 40 – possibility of doing a greater number of creases than those necessary to fold the sheet Power supply 400 Volt three phase + Neutral 50 Hz 4 Kw This machine from showroom is equipped by a standard V-shape creasing kit. All other optional tools are available and can be added to its equipment: Redpov Rbkmefx Abgjw -digital creation kit -standard perforating kit 2/1, 3/1, or 4/1 -micro perforating kit -extension feeder 100 cm

Condition: new, NEW machine, end-of-series Rjdpfx Absxmhflogsw Pit Stop D2H HIGH SPEED double-head creasing and perforating machine, equipped with 2 standard creasing kits (for Head A and Head B) and mobile wheels. The second head, unlike the first, operates from bottom to top. All creasing and perforating tools can be installed on this second head. This allows creasing and perforating to be performed in a single pass; or, by fitting two creasing tools, it is possible to perform creases from both the top and the bottom in one pass, ensuring the correct crease orientation for zig-zag folding. High-performance creasing machine with a maximum output of up to 14,000 sheets per hour. Easy-to-use controls allow for up to 100 creases or perforations per sheet and a memory capacity of up to 200 jobs. The machine can crease, perforate, and punch, making it ideal for WIRE-O binding and calendar production. This end-of-series machine can be equipped with the following optional tools: - Digital creasing kit (for both Head A and Head B) - Perforation kit 2/1-3/1-4/1 (for both Head A and Head B) - Micro-perforation kit (for both Head A and Head B) - 100 cm extension - Punching kit in various sizes Technical data: Min./max. sheet size: 8×10 cm / 50×70 cm (with optional extension 50×100 cm) Paper weight: 80 to 600 g/m² Programming: 200 programs (100 operations per program) Minimum crease distance: 0.1 mm Production speed in A4: 14,000 sheets/hour (with 1 crease) Power supply: 400 Volt three-phase + neutral, 50 Hz

Condition: ready for operation (used), D&K System Jr. Year 2006 Format max 68x76 cm Format min 20x28cm Till 500 gsm can work Single Sided Thermal Film Laminator Accufeed Jr. Automatic Sheet Feeder, Acculam Jr. Laminator, Accu-III Jr. Rodowhcfxepfx Abgjw Automatic Sheet Separator, Jogger Catch Tray Delivery

Condition: used, Face mask machine for sale Mask size: 175 x 95mm band size: 185 x 15mm Machine with 4 sets web guiding system Rodpsypcxaefx Abgow

Condition: new, Year of construction: 2022, machine/vehicle number: 2918542, Brand new machine. Rsdpji A Ilpefx Abgow

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, height adjustment type: mechanical, RM Group Spindle Moulder (Under Spindle) Specification: • Condition - used, fully serviced • Manufacturer - RM Group Redpfow Avxbjx Abgow • Model - SM 110 • Spindle diameter 30 mm • Motor power 4 kW • Star-delta motor starter • 3 belt-regulated spindle speeds: 6,000 / 8,000 / 10,000 rpm • Manual up/down adjustment • Original paintwork • Extraction port - 120 mm • Year of manufacture - 2009 • Weight - 360 kg • Dimensions: 112 x 75 x 115 cm (L x W x H) Additional information: • Very good, factory technical and visual condition • The presented photos show the actual condition of the item for sale • Possibility to connect and test the machine on site

Condition: new, VSR turbocharger high-speed balancing machine SBR-10 Rsdpfx Absnfvmhsgew SBR-10 professional specialised equipment for high-speed balancing of assembled turbo cartridges. Equally useful for car and truck turbocharger. The machine was designed for entry level turbocharger repair workshop, including medium re-manufacturers. It solves a wide range of tasks that repair centres face on a daily basis. The SBR-10 simulates the same testing and balancing conditions as the turbocharger on the vehicle, this allows the quality of the repair to be guaranteed. It also allows checking turbocharger for oil leakage. A well-balanced turbocharger has a long service life which reduces the return rate of turbochargers and helps to build up your reputation. HIGHLIGHTS Mounting the cartridges on their standard surfaces (as on the engine) allows the installation of almost all turbochargers. Wide range of accessories and adapters for installing any kind of turbos Includes adapters for installing turbochargers with lower oil inlet and reverse rotation turbines Oil system with oil heating allows to recreate similar conditions to the real one during balancing. The turbocharger rotation and measurement is automatic. The cycle includes acceleration to maximum speed, measurement during the cycle, and air shutdown. Emergency shutdown is provided in case of extreme vibration increase, which prevents cartridge destruction even in case of assembly errors Automatic cycle allows to carry out vibration measurement in a short and sufficient period of time. Vibration measurement of the turbocharger housing - up to a value of 10G, which 2 times better than other analogs. KEY FEATURES • car and truck turbocharger balancing • Any turbocharger installation • All type turbocharger adapters • Reverse rotation adapters • Balancing speed up to 300 000 rpm • Fast oil heater and temperature regulation • 3-stage oil filtration • Real-time unbalance measurement • Automatic cycle turbocharger balancing • An industrial fanless touch screen pc control system • Access to self-editing of the data base • Creation and printing of reports on turbocharger balancing SPECIFICATIONS Maximum compressor wheel diameter 120 mm Maximum rotation speed 300 000 rpm Pneumatic system operating pressure 0,8 – 1,0 MPa Minimum air receiver volume 1000 L Power supply 220V, 1Ph, 50Hz Power input 1,5 kW Dimensions 1120 х 780 х 1274 mm Weight 285 kg We manufacture fuul range turbo repair equipment. Please contact us to get more info! 👇

Year of construction: 2014, condition: excellent (used), functionality: fully functional, We offer for sale a Bonded Panel Technology LTD (Duemas) Lamella Cutting System for mineral wool boards, complete with extraction unit, manufactured in 2014 and in very good technical condition. This equipment is engineered for precise cutting of mineral wool boards into lamellas with adjustable thicknesses from 40 mm to 200 mm, making it ideal for sandwich panel and insulation material producers. The system comprises: - Lamella saw with 35 Ø550 mm blades (15 new blades in original packaging) - Two 3-meter gravity conveyors - Additional main shaft (2 shafts in total) - Complete set of spacers and top boards for 40, 50, 60, 80, 100, 120, 150, and 200 mm - Complete dust extraction system with 15 kW Auto Shaker filter - Full ductwork and connection components Main technical data: - Maximum slab width: 1010 mm - Maximum slab thickness: 200 mm - Main motor: 15 kW - Power supply: 415V, three-phase - Approx. 3,000 operating hours (2014–2019) Rsdpoyk Dmnsfx Abgew This equipment has been well maintained and is in very good working condition. Immediate availability.

Condition: good (used), Year of construction: 2015, machine/vehicle number: AS4002/10, functionality: fully functional, This kiln is manufactured by the Italian company SITI and is suitable for firing sanitary ceramics. The guaranteed firing temperature is 1220-1230 degrees Celsius. It can also be used for corrective firing of sanitary ceramics. The kiln comes with 10 complete cars equipped with heat-resistant accessories. Additionally, it includes a manual shuttle for kiln cars and a hydraulic lifting table for loading pieces. Furthermore, there are 4 stainless steel exhaust chimneys included. The furnace was in operation for 3 years and was professionally dismantled in 2021. It is currently stored in Ludinovo, Kaluga Region, Russia. Rsdpfju S E Umsx Abgow

Condition: new, Dynamic Hard-bearing Balancing Machines of the 9D716 series have originally been designed to meet the needs of a wide range of customers. They are undoubtedly the best solution if you need to balance a wide range of rotor types, weights and sizes. This has led to their use in a wide range of industries. The machines have many unique technical solutions that allow you to set up and balance complex rotors in the shortest possible time without losing the accuracy of the unbalance detection. MACHINE HIGHLIGHTS • The specially designed rollers use advanced patented Exact Barrel grinding technology and are mounted on precision bearings. • The monolithic design of the supports and base eliminates vibration losses during balancing by reducing the number of "oscillating system" elements. • Allows large initial unbalances to be measured without destroying the machine, and rotor unbalance to be corrected directly on the machine. • The low natural resonance frequency of the supports allows the rotor to be balanced at low speeds. • The width of the support rollers and roller block allows the installation of rotors with very short rotor bearing journals. The modular design allows rotors with unusual configurations to be mounted using spacers or tools. • The height of the roller block is adjustable, allowing rotors with different journal diameters to be balanced and the rotor to be centred during machine set-up. • The unique "Micro-Tuning" technology eliminates the effects of axial slippage during rotation. • The belt drive has a patented "long stroke" design that allows any rotor to be rotated using only two drive belts. Redjn Hwqvjpfx Abgow • The frequency converter drive provides smooth acceleration and deceleration of the electric motor and infinitely variable speed control of the rotor. MACHINE DESIGN OPTIONS • Axial drive that uses a cardan shaft. Capable of transmitting high torque from the electric motor to the rotor. This type of drive is used for parts with high aerodynamic resistance or special design features (e.g. augers). • Drilling module for unbalance correction of the rotor without removing it from the machine. Convenient to use to increase the productivity of the operation. • Extended machine bed. The base of the machine can be made for any length of rotor. In our practice we have had machines for rotors of 12 metres in length. MEASUREMENT AND CONTROL • We make balancing easier - the main advantage of our balancing systems. • The balancing process is displayed in real time and the unbalance behaviour of the rotor is monitored on the screen to achieve the best possible result. • The maximum sensitivity of the machine at any moment of operation, the set-up and calibration of the machine is carried out by the operator himself. • Free from the influence of external vibration factors on the measurement result, it has a high degree of protection against various types of interference. • World-leading functionality and accuracy. SPECIFICATIONS Weight range of balanced rotors 5 - 500 kg Maximum rotor diameter (above the bedding) 1300 mm Diameter of rotor support journals 30 - 180 mm Distance between centres of rotor support journals 200 – 2000 mm Support type Rollers Transmission element for rotor rotation Belt / Cardan Minimum achievable residual specific unbalance 0.4 g.mm/kg Rotor speed range 300 – 1500 rpm Electric motor power 4.0 kW Parameters of the supply network 380V, 3 Ph, 50Hz

Condition: new, GEOMET-2000 flow bench for calibrating a variable nozzle turbocharger without shaft rotation. This flow bench can calibrate the geometry of vacuum, air and electronically controlled turbochargers. The equipment is adapted to the needs of workshops for repairing turbochargers of trucks and cars. It is also designed to work with large-sized or non-standard turbocharger designs; Flowbench GEOMET-2000 will allow a regular workshop to provide professional turbine repair services, thus gaining more customers. HIGHLIGHTS Adjusting the end stop position of the air flow control mechanism (variable geometry) will eliminate the "overblowing" effect, which is detrimental to the engine. Adjusting the length of the actuator rod to adjust the actuation timing of the air flow control mechanism. Evaluating the spring elasticity of the actuator for in-depth diagnostics of vacuum and pneumatic actuators. Checking the operation of the N75 valve for turbines with vacuum valve, which is involved in controlling the turbocharger on the vehicle. Rjdpfx Absn E N E Eogjw Tuning of electronically driven turbos is done by connecting to an external tester ATP-1000. Vertical position of the turbocharger and free working area - comfortable and efficient work with all types of turbochargers. KEY FEATURES • More than 6200 turbo references database • Creation of a test plan for a new turbine from the manufacturer. • All measurements are done in real time. • Calibration of the test bench before starting work • Automatic atmospheric pressure and temperature compensation • N75 valve testing function • Built-in blower pump to create a constant airflow • Self-developed Turbo Test software. • Creation and printing of reports on the tuning process. • Quick turbine installation thanks to magnetic adapters • Self-diagnostics SPECIFICATIONS Maximum productivity of the vacuum pump 180 m3 Required pressure in the pneumatic system 0,6 – 0,8 MPa Power supply 220V, 1Ph, 50Hz Power input 1,5 kW Dimensions 1190 х 520 х 1730 mm Weight 255 kg

Condition: new, ATP-1000 tester can be successfully used in companies engaged in turbocharger repair, as well as in car repair services offering a wide range of repair works to determine the cause of turbocharger malfunction. It is also suitable for companies supplying electronic actuators. Rjdpfxon E S T Uj Abgjw The tester checks the functionality of the actuator as a whole and its individual elements such as the position sensor and servomotor. Separate diagnostics of each element allows you to accurately determine the condition of the turbocharger actuator and detect a problem, if one exists. The ATP-1000 is easy to use and allows you to quickly check the condition of the actuator and its components. This has made it an effective tool for monitoring the functionality of actuators. HIGHLIGHTS Testing of electronic actuators for turbochargers Programming (adaptation) of SIEMENS electronic actuators Testing of 12V DC motors up to 2A Testing of boost solenoids used in pneumatic systems Testing of electronic and pneumatic actuator position sensors Works with all common types of actuators and similar in principle of operation. Communication protocols: PWM, CAN, ADC, SENT. KEY FEATURES • Protection of the device by current 2A for 3 seconds • Automatic detection of DC motor polarity inside the actuator • Tooltip for color-coding the cable to the selected actuator type • Display position sensor readings as a percentage • Display of additional parameters of HELLA programmable actuators: firmware number, programmed angle value • Portable version for testing directly on the vehicle • USB control of actuators, when working together with the software of GEOMET-2000 turbo flowbenches. • Regular updating of the tester firmware СABLES Set of diagnostic cables for actuators 12 pcs. Set of diagnostic cables for position sensors 6 pcs. Cable set for uncommon turbines 11 pcs. USB cable 1 pc. Cable AC/DC 12V, 4A power supply 1 pc. !!!! If you are looking for an electronic actuator programmer, ask me.

Condition: new, 9D715US crankshaft balancing machine is adapted for balancing crankshafts of various designs, including crankshafts of V6, V8, V10 and V12 engines, with balancing weights on the connecting rod pins: - Balancing of crankshafts of any design - Shaft weight up to 300kg - Shaft length up to 1400mm - Drilling module for unbalance correction The machine design allows balancing crankshaft separately, as well as crankshaft complete with flywheel and clutch, which guarantees minimum unbalance during engine operation. MACHINE HIGHLIGHTS • Hard-bearing supports - safe operation with high initial unbalance at low speeds. • Roller cassettes with large diameter spherical rollers and provide the required accuracy for balancing heavy shafts. • Replaceable antifriction prismatic V-blocks allow balancing of crankshafts with low mass or with special bearing journals. • Narrow support stands of the machine allow balancing of crankshafts with complex configuration and with “narrow” bearing journals. The 9D715US machine has a cassette width of 27 mm, which is the best in its class. • For balancing V-shaped crankshafts, the machine can be equipped with counterweights (variable weight) to simulate the weight of connecting rods. • A vertical drilling module mounted on its own guides allows unbalance in the crankshaft counterweights to be corrected directly on the machine. • The frequency converter drive provides smooth acceleration and deceleration of the electric motor and infinitely variable speed control of the rotor. MEASUREMENT AND CONTROL • We make balancing easier - the main advantage of our balancing systems. • The balancing process is displayed in real time and the unbalance behaviour of the rotor is monitored on the screen to achieve the best possible result. • Measuring balancing system has additional necessary functions for crankshaft balancing: - recalculates the unbalanced mass to the drilling depth, taking into account the drill diameter and the permissible drilling depth. - It recalculates the unbalance on several correction planes, so that unbalance can be corrected in neighboring crankshaft counterweights. SPECIFICATIONS Weight range of balanced rotors 3 - 300 kg Maximum rotor diameter (above the bedding) 1100 mm Diameter of rotor support journals 20 - 140 mm Distance between centres of rotor journals 150 – 1350 mm Support type Rollers / V-blocks Transmission element for rotor rotation Belt Minimum achievable residual specific unbalance 0.4 g.mm/kg Rotor speed range 300 – 1500 rpm Electric motor power 2.2 kW Parameters of the supply network 380V, 3 Ph, 50Hz Rjdpfxewk Itto Abgsw VTM Group balancing machines will allow you to do your job well and get positive feedback and attract more customers. Do you need a machine for a different load capacity, diameter or length? We manufacture balancing machines for every needs. Please contact us to get the best offer! 👇

Year of construction: 2025, condition: new, GeoBoost-7000 Combined bench for turbocharger geometry calibration and performance evaluation. Stand for static and dynamic calibration and testing of turbocharger. It has a combined two-position design, which allows testing the turbocharger in two modes Rsdpjvtn Hmsfx Abgow - rapid static calibration of turbocharger geometry - Full dynamic diagnostics at different operating modes GeoBoost-7000 will allow you to carry out professional testing of turbocharger operation during repair, tuning or modernization. The availability of two working zones of the machine depending on the testing method helps to carry out comprehensive diagnostics. HIGHLIGHTS • Simulates real-world operating conditions for accurate turbocharger diagnostics and tuning. • Flexible and versatile to work with a variety of turbocharger models. • All types of turbochargers can be installed using the accessories provided. • Oil leak testing using heated oil and compressed air. • N75 turbocharger control valve testing. KEY FEATURES - Ability to adjust the extreme position of the blades of the air flow control mechanism. - Adjusting the length of the stem to adjust the actuation torque of the air flow control mechanism. - Real-world turbocharger testing; - Real-time geometry tuning; - Performance testing of actuators: vacuum, pneumatic and electric types; - Diagnosis of servo-drives of electric actuators (optional); - Post-assembly testing of the turbocharger for oil leakage; - Availability of a high capacity vacuum pump to create the required vacuum and air flow. - Testing the turbine according to the manufacturer's test plan; - Calculate turbocharger performance; - Plot supercharger inlet and turbocharger outlet boost vs. flow; - Construct the resulting graph; - Generate and print test reports. SPECIFICATIONS Maximum rotor speed 99 000 rpm Maximum air flow rate of compressor 110 m³/min Maximum pressure of compressor 900mbar Maximum vacuum created by the vacuum pump -800mbar Power supply 380V, 3Ph, 50Hz Power input 6 kW Dimensions 1700 х 900 х 1500 mm Weight 400 kg

Condition: new, The POSEIDON-1000 cleaning machine is designed to diagnose, wash, and dry DPF filters and catalytic converters of various designs, meeting EURO 5 and EURO 6 standards. The machine offers gentle and effective cleaning through a washing method that achieves excellent results without damaging the expensive filters. The stand operates based on hydro-impact and turbulent fluid movement, using special washing solutions and temperature regimes for effective cleaning. After cleaning, the filter's operating properties are restored by 97%. KEY FEATURES - Testing of the filter before washing to assess the degree of clogging and after washing to check the quality of the cleaning. - Automated washing cycle with the possibility of programming all operating modes. Filter cleaning is hydrodynamic, with hydraulic and pneumatic systems operating in specific modes to generate hydraulic impulses for the removal of contaminants. - Accelerated drying of the filter by means of a powerful hot air blower, which allows the complete removal of residual moisture from the product. >> This allows the entire cleaning cycle to be completed in a short time, >> and return to the customer a clean and dry filter ready to be fitted to the vehicle. Perspective business with POSEIDON-1000 • The equipment and technology allow to perform high quality cleaning of DPF particulate filters of all types and brands of cars. • The most functional stand among foreign analogues, thanks to which it has high productivity. • Automated operation and control of the process of cleaning and drying the filter allows the stand to be operated by one person. Redpfx Aepbv Hgobgsw • Minimal resources and time required to open your own service for cleaning particulate filters with our equipment. • Maximum quick payback of the equipment if you own a service for the repair of automotive units. YOUR BENEFITS + Automated process of DPF filter cleaning with the possibility of programming all the machine's operating modes, gives you the opportunity to independently adjust the washing mode to increase the efficiency of the processes or to work with the modes set by the manufacturer. + Full control of the filter cleaning and drying process is guaranteed by the presence in the standard programme of graphs displaying air or water pressure values in real time. + The filter condition diagnostic function with report printing allows the creation of reports before cleaning (to check the degree of contamination) and after cleaning (to check the quality of the operation performed). + The working surfaces and the body of the stand are not subject to corrosion as they are made of stainless steel sheet material. + The hermetic chamber not only limits the spillage of technical fluids, but also reduces the noise level to acceptable levels, making work on the stand more comfortable and safer. + Quick installation of the DPF filter is possible thanks to a separate pneumatic system for the connection of a universal quick-fit adapter. + The universal tool allows the installation of any DPF filter, regardless of the vehicle type. + Closed-loop fluid filtration is achieved with coarse and fine filters. The filters are equipped with pressure gauges that allow the degree of contamination to be determined. + Rationally selected water tank volume allows to provide short fluid warm-up time, long time between fluid changes. Please contact us to get the best offer!

Condition: new, Turbocharger core balancing machine DBST-20 Low-speed turbocharger core balancing machine meets the needs of turbocharger repair workshops. Machine is used for balancing common truck and passenger car turbos. It is multi-functional and universal, so it is suitable for many large turbochargers of special vehicles, railroad and marine turbines, and even for industrial turbochargers of gas and diesel power plants. The DBST-20 is used for balancing common truck and car turbochargers. It is multifunctional and universal, so it is suitable for many large turbochargers of special vehicles, railway and marine turbines, and even industrial turbochargers of gas and diesel power plants. This stand allows for the final balancing of cartridges due to the specific design features of large turbines. The stand is used for balancing turbocharger cartridges at low speeds, as well as for checking turbocharger cartridge oil leaks. This is a larger version of the DBST-10 model that our company has developed specifically for large turbochargers weighing up to 30 kg. HIGHLIGHTS Rjdsn Nxcfopfx Abgjw High accuracy of determining the unbalance of the rotor (0.4 g ∙ mm / kg). Reinforced torsional vibration suspension - high accuracy of vibration transmission, quality balancing results. Mounting the cartridges on their standard surfaces (as on the engine) allows the installation of almost all turbochargers. Wide range of accessories and adapters for installing any kind of turbos. Includes adapters for installing turbochargers with lower oil inlet. Oil system with oil heating allows to recreate similar conditions to the real one during balancing. 3-stage system of oil filtration allows to eliminate an unbalance directly on the machine by portable grinders. The measuring system displays the balancing process in real time and monitors the rotor unbalance behaviour on the screen to achieve the best possible result. Rotor adjustment and machine calibration are performed by the operator, ensuring maximum machine sensitivity at all times. Safe turbo shaft speed allows risk-free quality running-in of assembled cartridges, which significantly increases cartridge reliability after repair. KEY FEATURES • High accuracy 2 plane balancing • Truck and car turbocharger balancing • Any turbocharger can be installed • All type turbocharger adapters included • Quick and easy turbo core installation • Balancing speed up to 10 000 rpm • Fast oil heater and temperature regulation • 3-stage oil filtration • Real-time unbalance measurement • Calibration of the machine by the operator • Industrial fanless touch screen PC control system • Creation and printing of reports on turbocharger balancing SPECIFICATIONS Maximum turbocharger weight 30 kg Maximum turbocharger diameter 300 mm Maximum turbocharger length 300 mm Maximum rotation speed 10 000 rpm Minimum achievable residual specific imbalance, 0,4 g mm/kg Pneumatic system operating pressure 0,6 – 0,8 MPa Power supply 220V, 1Ph, 50Hz Power input 1,5 kW Dimensions 1120 х 780 х 1350 mm Weight 285 kg

Condition: new, Year of construction: 2023, Galen log grapple for a 20-ton excavator offers exceptional durability and efficiency, perfectly tailored for demanding logging operations. Its robust design and advanced hydraulic system ensure precise control and handling of various log sizes, enhancing operational productivity and safety. For detailed information please contact us Redpfx Aeqtrrdsbgsw