Used Doosan Svm 4100 for sale (763)

Condition: new, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, number of seats: 3, loading space volume: 21 m³, loading space length: 4,200 mm, loading space width: 2,200 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, tail-lift, Iveco 35S18H Diesel 3.0L - Flatbed with drop-side gate and tail lift, 750 KG capacity * AT ? Front axle Q-LEAF (transverse leaf spring) * CA ? Axle configuration 4x2 * DR ? Left-hand traffic (SX) * EP ? Engine F1C 176 EVI (176 hp) * GT ? 6-speed manual transmission (6M-500) * MT ? Permissible total weight 3.5 t * PT ? Rear axle mechanical (SPMN) * RW ? Single tires in the rear Hsdpfxeyz H Hye Aazju * VE ? Chassis with cab * WB ? Wheelbase 4100 mm ----Special equipment, exterior / vehicle * 72625 ? Full-LED headlights (daytime running lights, low beam and high beam) * 73024 ? Exterior mirrors for superstructures up to 2.35 m width * 14569 ? FMS data interface (telematics) Chassis * 06064 ? Reinforced parabolic springs in the rear * 01908 ? AGM battery 105 Ah Engine / Technology * 79570 ? Alternator with constant charging current * 02359 ? Axle ratio 3.59 Interior * 05925 ? Additional adjustable speed limiter * 08628 ? Storage compartment above the windshield * 00259 ? Comfort driver's seat, air-suspended, adjustable with lumbar support and armrest ----Packages * COMFORT package * 01619 ? USB port A+C * 01606 ? Infotainment system with 7-inch display * 06555 ? Front fog lights * 76104 ? Air conditioning (manual) * 02463 ? Cruise control * 07196 ? Air conditioning compressor 170 cm³ ----Additional vehicle data * 50105 ? Color White IC 194 * 20532 ? Tires 225/65R16 ECO * 33999 ? Standard use (no special superstructure) * 30164 ? Logistic Mode deactivated * 30001 ? Battery charged * 30560 ? Operating manual * 79443 ? Operating manual EMEA/APAC ----Superstructure / superstructure equipment * Aluminum side boards, 400 mm * Floor made of non-slip plywood (15 mm, waterproof) * Subframe made of aluminum profiles * Foldable entry step in the rear * Cab protection made of aluminum profiles * Lashing points (8 pieces) * Plastic fenders with splash guard * Tarpaulin superstructure (silver RAL 9006, 670 g/m²) * Light-transmitting tarpaulin roof ----Additional options, superstructure * Removable center post * Roof spoiler (white) * Side wind deflectors * Customs rope Tail lift * Type ? BC 750S2S * Load capacity ? 750 kg * Tare weight ? 200 kg * Arm length ? 750 mm * Lifting moment ? 5.62 kNm * Platform ? Aluminum * Platform dimensions ? 1610 mm x width adapted to the superstructure width ----Operation of the tail lift * External control with two joysticks * Deactivation of the tail lift in the driver's cab * 2-function remote control with cable ----Additional equipment * Mounting adapter * Seal set for the superstructure * Blinkers on the platform * Eyelets for customs rope WARNING! EXAMPLE IMAGES. Our special service for you: * Maintained according to the service booklet at contract partners and specialist workshops * Winter tires available at extra cost * Warranty insurance possible up to a maximum of 36 months for an additional fee * We will gladly and fairly take your used vehicle in payment! * Financing possible from 6.99% with and without down payment up to a maximum of 96 months, subject to credit approval * TÜV / DEKRA main and emission test * EU net sales possible - intra-community delivery with a valid VAT ID number * Sales to non-EU countries (worldwide) possible, including export registration, supplier declaration * We deliver your vehicle throughout Germany for an extra charge! * Registration service for customs license plates and short-term license plates including insurance and registration fees The information provided on the Internet is a non-binding descr

Condition: good (used), Cantilever racking, heavy-duty racking, single-sided cantilever racking, pallet racking Hsdpfx Aasyu Um Tjzou -Cantilever rack: two-sided, height 4000 mm -Stands: 5x 340/150/H4000 mm / 350/300/3400 mm -Cantilever arms: 70 pieces 140/140/1500 mm -Cross braces: 124 pieces 60/40/1350 mm -Submission/Price: complete -Weight: 4100 kg

Condition: new, mileage: 50 km, fuel type: diesel, empty load weight: 2,540 kg, overall weight: 4,200 kg, tire size: 205/75 R17,5, axle configuration: 2 axles, wheelbase: 4,100 mm, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, onboard computer, truck registration, | Iveco Daily chassis, NEW VEHICLE!! | Automatic transmission installed, EURO 6 | Twin tires | Air suspension on the rear axle | Air conditioning, power windows, power mirrors with heating | Radio/CD, sunroof, spare wheel holder | Frame length: 4.20 m | Wheelbase: 4100 mm, also available with 3750 mm | Digital tachograph, rearview camera | Equipment list available upon request | Subject to errors, typos, and prior sale. Hodsy Niyljpfx Aazsu

Condition: new, mileage: 10 km, power: 129 kW (175.39 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,500 kg, loading space length: 4,950 mm, loading space width: 2,110 mm, color: yellow, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, Welcome to carmax24! Today, you have the opportunity to purchase one of our selected, inspected vehicles. Expertly inspected and high-quality vehicles guarantee high customer satisfaction, and have done so since 2008. This is our daily approach because you, as a customer, are our top priority at carmax24. Iveco Daily 35S18HA8, Euro VI, 176 hp, 3.0 Diesel, 8-speed automatic transmission - New Model Technical Data: * Type: 35S18A8H * Engine: Euro VI, 176 hp * Displacement: 3.0 l * Transmission: Automatic transmission * Wheelbase: 4100 mm * Color Code: Yellow * Permissible total weight: 3,500 kg * Vehicle type: Truck Hodpfxozpdi Es Aazsu * Additional: Rubber floor mats Special equipment from the factory: * 00344 - Rear-view camera * 05925 - Additional, adjustable, and switchable speed limiter * 07629 - Without acoustic reversing warning signal * 00744 - Window in the rear wall of the cab * 06064 - Reinforced double parabolic springs in the rear (for S models) * 08628 - Storage compartment above the windshield STYLE PACKAGE 3.5 S * 79336 - Daily radiator grille with chrome strips * 01553 - Emblems in "Gun Metal" * 02443 - Leather steering wheel * 02308 - Aluminum rims Daily * 72625 - Full LED lighting (daytime running lights, low beam, high beam) COMFORT PLUS PACKAGE * 00259 - Sprung-mounted comfort driver's seat with lumbar support and armrest * 01611 - USB ports (A + C) for driver and passenger * 75082 - Passenger double seat bench with folding table and 3-point belts * 07196 - Air conditioning compressor 170 cm³ * 01605 - Infotainment system "NAVI MY IVECO" with 10-inch display * 14522 - Adaptive cruise control (ACC) with radar sensor * 06650 - Automatic climate control and heating system * 79297 - Comfort headrests made of memory foam with Daily logo Body Specifications - Platform * Dimensions: approx. 4900 mm x 2100 mm * Single cab Body Construction * Aluminum frame made of welded special profiles * Loading area made of non-slip, perforated aluminum plates * Openings reinforced with stainless steel inserts * Aluminum loading ramps (340 mm wide, 2500 mm long) * Ramps stored in drawers, can be moved across the entire width * Central locking system for the loading ramps * Movable winch frame * Simple bicycle protection cover * Fenders with mud flaps (2 pieces) * Trailer hitch + second hitch with socket * Toolboxes (500 mm - 2 pieces) * Painted sides, railings, and rear panel * Reinforced edges with aluminum angles * Additional lashing points (8 pieces) Electrical System * Rear lighting mounted on the vehicle frame * LED side marker lights (orange, 6 pieces) * LED contour lights (white/red, 2 pieces) * Trailer sockets (2 pieces, 13/7-pin) * Work spotlights H3 in the front (2 pieces) * Main switch Additional Options * Electric winch SUPER WINCH TS9500 (4.2 t) * Front railing (high) * Warning light bar Yellow LED * Additional work light LED Our special service for you: * Maintained according to service schedule at authorized dealers and master workshops * Winter tires available for an extra charge * Extended warranty up to 36 months available for an extra charge * We will gladly and fairly take your used vehicle in trade! * Financing possible from 6.99% with or without down payment up to 96 months, subject to credit approval * TÜV / DEKRA main and emissions test

Year of construction: 2008, condition: good (used), Make: OMERA Type: R 1600 Year: 2008 Specifications Metric US Standard Max. blank / workpiece over bed 1800 Dimensions (Estimate) Length 2800 mm Width 2000 mm Height 2600 mm Weight 4100 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Share on Downloads Hedpfskvnuuex Aazou Max. blank / workpiece over bed:1800 Length: 2800mm Width: 2000mm Height: 2600mm Weight: 4100kg Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm Max. blank / workpiece over bed:1800 Length: 110.236inch Width: 78.74inch Height: 102.362inch Weight: 9043lbs Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm

Condition: used, adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed gearbox Nord type: SK01R-63L-4-100LU -Motor power: 0.18 kW -Speed range: 68-340 rpm -Motor: adjustable -Height of shaft axis: 102 mm -Drive shaft: Ø 20 mm Hodpfecvvyyex Aazeu -Construction: B3 -Number: 3 motors available -Price: per piece -Dimensions: 465/180/H310 mm -Weight: 20.55 kg

Year of construction: 2006, condition: good (used), functionality: fully functional, machine/vehicle number: 138883, TECHNICAL DETAILS Press force: 160 t Bending length: 4100 mm Distance between uprights: 3100 mm Hsdpolp Iq Rofx Aazju Control system: DELEM DA66W Table width: 120 mm Stroke: max. 800 mm Downstroke speed: 80 mm/sec Upstroke speed: 80 mm/sec Speed under load: 8 mm/sec MACHINE DETAILS Oil capacity: 185 l Total power consumption: 24 kW Machine weight: approx. 13 t Space requirement: approx. 4.8 x 2.2 x 2.2 m

Year of construction: 1994, condition: good (used), machine/vehicle number: 24.105, A used, well-maintained hydraulic press brake HATASTAR, equipped with: - CYBELEC DNC 70 control system - Controlled axes Y1, Y2, X, R - Hydraulic upper tool clamping - Hydraulic crowning - FIESSLER AKAS safety system - Tools - Press brake manual - Documentation Bending length 4600 mm Hedpfsfthzksx Aazsu Frame width 4100 mm Pressing force 1350 kN Stroke 220 mm Rapid traverse 140 mm/sec Working speed 10 mm/sec Return speed 100 mm/sec Further technical data can be found in the PDF document. Technical data and dimensions: Subject to change.

Condition: like new (used), Year of construction: 2008, Manufacturer: Hazemag Type: AP-PH 1415E Mach. No.: AD 26953 Year of Manufacture: 2008 Hjdpfx Aoggfmhsazeu Motor: Scania Rotor Size: 1.400 x 1.500 mm Included: – Conveyors – Overband Separator (Wagner 452-95/120-450) – Dumpbunker – Feeders (Jöst FUF 1300/ – 200 x 4100 – Jöst FUF 1200/1277 – 200 x 2500) – Pre-screen (Jöst SUG 1400 x 2000) – Hydraulic opening system.

Condition: new, functionality: fully functional, mileage: 30 km, power: 154 kW (209.38 HP), first registration: 06/2025, fuel type: diesel, empty load weight: 3,700 kg, maximum load weight: 3,500 kg, overall weight: 7,200 kg, wheelbase: 4,100 mm, next inspection (TÜV): 06/2027, fuel: diesel, fuel tank capacity: 100 l, color: white, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 3, loading space volume: 17 m³, loading space length: 4,100 mm, loading space width: 2,000 mm, loading space height: 2,100 mm, Year of construction: 2025, number of previous owners: 1, Equipment: ABS, additional headlights, air conditioning, airbag, central locking, cooling unit, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, soot filter, spoiler, traction control, trailer coupling, truck registration, EU vehicle with warranty. Cargo space length: 4100 mm Cargo space width: 2100 mm Cargo space height: 2000 mm Thermo King V500 MAX 20 refrigeration unit, 230V, with standby cooling Temperature recorder with printer Rear double doors, 270° opening Side door – right and left Center load securing bar, hole from the floor 380 mm Interior lined with aluminum up to a height of 1000 mm Water drain with valve Portal door mounting VECO air suspension on the rear axle 8-speed HiMatic automatic transmission Europallet spaces – 8 Payload approx. 3500 kg Rearview camera Air conditioning – automatic climate control VDO – digital tachograph Hi-Connect car radio with navigation Full-LED headlights Steering wheel adjustable in height and length Radio remote control on the steering wheel Tablet and smartphone holder with USB charging port Leather steering wheel Comfort driver's seat with hydraulic suspension Armrest 3-seater co-driver's double bench seat with multi-function storage Fog lights with cornering function Cruise control 100-liter fuel tank Fog lights with cornering function Central locking with remote control Electrically adjustable and heated exterior mirrors LED daytime running lights Spare wheel Delivery, leasing, or financing options available. Available in approximately 6-8 weeks. Contact us: Auto-Wardenga Irenäus Wardenga, also available on WhatsApp Hsdpfjghk Evjx Aazeu

Year of construction: 2023, condition: new, ! Offers for customers from Baltic states only: Lithuania, Latvia, Estonia. Guillotine RAPIDO is fast reliable shearing machine. Depends on sheets length there are guillotines with different working lengths available: 1300 mm / 2600 mm / 3200 mm / 4100 mm. Machine can do up to 35 cuts per minute. The drive system with eccentrics, pulldown rods, and hold down system which can be positioned as close as 2.5 cm from the knives allow for easy and expedient trimming of narrow strips. RAPIDO guillotine shear is equipped with squaring arms on both sides and the LED cutting line light. Available working lengths: 2600 mm / 3200 mm / 4100 mm Hjdpoixz D Ujfx Aazeu

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-4020-CNC Delem DA-58T Specifications - Nominal pressure: 2000 kN - Max working length 4000 mm - Throat depth: 320 mm - Max stroke: 200 mm - Daylight: 480 mm - Distance between side frames: 3200 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 4100 mm - Width: 1800 mm - Height: 2800 mm - Weight: 13700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual Hjdpfjtizaysx Aazju - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2026, CORMAK W16 Bench Drill Press for Metal with Tapping Function – Precise and Reliable Drilling Machine The CORMAK W16 metal bench drill press is a precise and reliable column drilling machine equipped with a tapping function. Designed for professional applications, it is suitable for locksmith workshops as well as industrial production lines. The integrated spindle rotation direction change system makes it an ideal solution for both drilling and internal thread cutting operations. Main advantages of the machine Tapping function with automatic spindle rotation reversal – provides full control over the process without the need for manual gear changes. Manual rotation direction change using a foot lever – allows precise tool retraction during special operations. High spindle rigidity – ensures accurate holes even during long operating cycles. Adjustable drilling/tapping depth setting – protects against exceeding the specified technological parameters. Tilting and rotating worktable – adjustment of ±45° horizontally and full 360° rotation around the column. Belt drive system – ensures quiet operation and reduced vibration. Built-in overload protection – safety limit switch installed in the belt transmission guard. Construction and technology The CORMAK W16 column drill press is based on a highly rigid cast iron construction, ensuring stable operation even with maximum quill extension. The spindle with an MK2 taper provides compatibility with a wide range of tools. The belt drive system offers five speed ranges (480–4100 rpm), allowing precise adjustment of operating parameters to the properties of the processed material. Precision and work efficiency Thanks to the 100 mm spindle quill stroke and adjustable drilling depth, the operator has full control over every stage of machining. The integrated tapping function makes the W16 a versatile machine for both drilling and thread cutting while maintaining high repeatability. The spindle speeds have been selected to provide optimal efficiency for drilling holes and producing metric threads in materials with different hardness levels. Applications The CORMAK W16 metal bench drill press is an ideal solution for: mechanical workshops and tool rooms, maintenance departments, assembly and production lines, technical schools and training centres. The machine is suitable wherever a precise drill press with tapping capability is required for machining steel, aluminium and engineering plastics. Standard equipment Self-locking B18 drill chuck MK2 drill chuck arbor Foot lever for changing rotation direction Belt transmission guard with limit switch Technical specifications Hedpforif Iujx Aazou Parameter Value Maximum drilling diameter 16 mm Spindle quill stroke 100 mm Spindle taper MK2 Spindle speed range 480 / 800 / 1400 / 2440 / 4100 rpm Spindle axis-to-column distance 193 mm Table dimensions 200 × 230 mm T-slots (table/base) 18 mm / 14 mm Base dimensions 528 × 360 mm Maximum spindle-to-table distance 315 mm Maximum spindle-to-base distance 556 mm Horizontal table rotation range ±45° Table rotation around column 360° Motor power 750 W / 400 V Weight 90 kg

Condition: new, Type CSD-HT-BR 70 Internal dimensions (width x depth x height) 7500 x 7160 x 4100 mm External dimensions (width x depth x height) 8080 x 7760 x 5500 mm The section of the structural columns of the chamber is 160 x 70 mm Snow load for the roof is 80 Kg/m2 Wind resistance of walls 27.8 m/sec Warming with glass wool Walls ǂ100mm Roof ǂ100mm Door ǂ100mm Door: sliding type, hung on a rail Wood for drying: various Loading the drying chamber with a forklift The heating system is gas Fuel - GPL gas Maximum thermal energy (300 kW) Maximum chamber temperature 75 °C The number of fans in the chamber is 5x3kw The total capacity of the fans is 162,500 m3/hour Number of probes: 4 HT/ 8 AWM/ 2 EMC/ 2 Temperature Voltage 400 V 50 Hz Total power 17kw) Hedpfxjrxtuio Aazou

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, position of the milling head: 2.5 x 2.5 °, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table width: 3,300 mm, table length: 12,000 mm, mount diameter: 50 mm, total height: 48,750 mm, total width: 100,000 mm, total length: 212,000 mm, overall weight: 100,000 kg, Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles. Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases One sole operator can control the DUPLEX milling machines Reduced space and investment requirement comparing with two single machines Fast investment amortization due to the high productivity Duplex solution admits different configurations: single working area, pendulum working areas For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Axis: 10300mm Y-Axis: 2000mm Hodpfx Aajrx Rxtozju Z-Axis: 1800mm Table Length: 12000mm Table Width: 3300mm Table load: 100000 Power on spindle: 22/30kW Spindle speeds: 60 - 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21200mm Width: 10000mm Height: 4875mm Weight: 100000kg

Condition: used, Bridge crane, hall crane, assembly crane, workplace crane, ceiling crane system -without chain hoist (available for an extra charge) -Load capacity: 1000 kg -Span width: 3100 mm -Crane length: 4100 mm -Helmet rails -Interior height of the profile: 65 mm -Inside width of the profile: 70 mm -Transport dimensions: 4140/450/H250 mm -Own weight: 180 kg Hodod Tdz Nepfx Aazeu

Condition: good (used), Servo motor, electric motor, DC motor -Spare part comes: from a machining center BJM type ALBZ-145 Hsdpfx Ajd Tpkneazeu -Max. Speed: 2500 rpm -Power: 3.97 kW -Torque motor: 21 Nm -Construction: B5 -Number: 2x motors available -Price: per piece -Dimensions: 370/140/H175 mm -Weight: 19 kg/piece

Condition: new, 1 brand new hydraulic oscillating shear Manufacturer: LAMI NOVA / Exclusive dealership! Model: SC 4006 Max. cutting length: 4100 mm Max. sheet thickness, for normal steel: 6 mm Max. sheet thickness, for stainless steel: 4 mm Cutting angle: 1.5° Overhang: 350 mm Cutting rate: 14 / min. Drive power: 7.5 kW Dimensions L x W x H: approx. 4630 x 2050 x 1700 mm Weight: 9600 kg Accessories / Special features: • NC control ELGO P 40 as an electronic positioning indicator for the motorized back gauge, length = approx. 800 mm, ball screw spindles • 1 heavy-duty angle stop with tilting cam, 1000 mm • 2 heavy-duty support arms • Large overhang of 350 mm for cutting longer sheet metal plates • Central cutting gap adjustment • Cutting line illumination • Small, fixed cutting angle of 1.5° • Ball rollers in the table • Upper blade with 2 and lower blade with 4 cutting edges • Plastic feet for the hold-down device • Electric foot switch • Sheet metal slide at the rear • Oil filling • Hydraulics BOSCH, DUPLOMATIK, REXROTH or OILCONTROL • Electrical system SIEMENS, TELEMECANIQUE • Operating manual • CE compliant Fig.: with option! Hjdpfxjd Ad Dbj Aazsu Delivery time: approx. 3 months after order receipt plus pre-carriage costs China - Germany Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: new, HYDRAULIC SHEAR MVD MODEL iSHEAR B 06-4000 EQUIPPED WITH A PNEUMATIC REAR SUPPORT. CNC ESA S 625 TECHNICAL SPECIFICATIONS Cutting capacity for material 450N/mm2: 06 mm Cutting capacity for material 700N/mm2: 04 mm Cutting length: 4100 mm Fixed cutting angle: 1.5° Clamp cylinders: 18 Hsdpfjfh R Injx Aazju Strokes per minute: 10 – 14 Back gauge: 250 mm Motor power: 10 kw Graduated scale and two sheet metal supports: 1000 mm Rear gauge stroke: 1000 mm Approximate weight: 11000 kg

Condition: used, Chimney, exhaust pipe, chimney stainless steel pipe -Chimney system: O 250 mm, not insulated -Quantity: 2 pieces of 1 m each Hjdpfx Aajd N Ddtezju -Price: complete -Dimensions: 250/250 / H1000 mm -Weight: 7 kg

Condition: new, functionality: fully functional, power: 116 kW (157.72 HP), fuel type: diesel, wheelbase: 4,100 mm, color: white, emission class: euro6, number of seats: 7, Year of construction: 2024, Equipment: ABS, air conditioning, airbag, central locking, cruise control, onboard computer, IVECO DAILY 35-160 Double cab, 7 seats Model year 2024 BRAND NEW FROM FACTORY READY FOR IMMEDIATE DELIVERY TO BE REGISTERED Engine: 3.0 L, 160 HP Zero kilometers 6-speed manual gearbox Wheelbase: 4100 mm Twin rear wheels Quad-leaf spring suspension Semi-elliptic spring + leaf spring Digital BLUETOOTH (DAB) radio Air conditioning / electric windows Digital comfort instrument cluster Removable spare wheel support USB charging port AT OTHER GROUP LOCATIONS, WE ARE OFFICIAL MERCEDES-BENZ DEALERS D.E. TRUCK S.P.A. NAPLES LOCATION (NA) DOMENICO ESPOSITO S.P.A. EBOLI LOCATION (SA) OFFICIAL DEALER FOR FOTON TRUCK, PIAGGIO COMMERCIAL and MAXUS DOMENICO ESPOSITO S.P.A. EBOLI (SA) and NAPLES (NA) LOCATIONS Hsdpfsud Axmjx Aazou - POSSIBILITY OF CUSTOM FINANCING OR LEASING OPTIONS ON SITE FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS ZERO DOWN PAYMENT PHONE: -0823 1686306 -335 6713062 WE OFFER A WIDE SELECTION OF USED MULTIBRAND COMMERCIAL/INDUSTRIAL VEHICLES (FIAT-HYUNDAI-DAF-MERCEDES BENZ-RENAULT-PEUGEOT-IVECO-MITSUBISHI-SCANIA S-WAY -5500-V8-650-580-730-S500-S 500-S500Stralis-MAN-NISSAN v8-Intarder-770S-Limited Edition-660 S semi-trailer-semi-trailer refrigerated tipper - Lamberet-schmitz ISUZU-FLATBED-CRANE-TIPPER-CURTAIN SIDER-BOX-TAIL LIFT-REFRIGERATED UNIT-INSULATED WITH FRIDGE-VAN)

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software Lifting table (mm) 4300 x 2200 Hjdpfeq Rffijx Aazou No. 2 Rear pushers (one with clamps / grippers) No. 8 clamps / grippers Max. cutting width (mm) 4200 Useful stroke of the pushing system (mm) 4200 Max blade projection (mm) 135 Max clamps opening (mm) 125 Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 460 mm - Kw 21 Adjustable speed of the saw carriage (m/min) 6 - 150 Front Turning table (rotating at 90°) with air blowing system (mm 2100 x 4100) Total power (Kw) 36 (ca.)

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 80 mm, turning diameter: 560 mm, center width: 2,000 mm, New CNC cycle lathe ZDM 560 x 2000 with Siemens 828D ShopTurn 2. Machine Overview The ZDM 560 x 2000 is a robust and versatile flat-bed CNC cycle lathe designed for flexible production, maintenance, and training environments. It combines the benefits of conventional lathes with state-of-the-art CNC control technology. Thanks to the Siemens 828D ShopTurn control system, it enables simple and intuitive programming. The machine is particularly suitable for single-part and small batch production and is available for immediate delivery from stock. 3. Technical Data ZDM 560Z Swing diameter over bed (mm): 560 Swing diameter with 6-position turret (mm): 420 Max. workpiece length (mm): 2000 Max. turning length (mm): 1900 Max. turning length with 6-position turret (mm): 1735 Max. swing diameter over cross slide (mm): 330 X-axis travel (mm): 320 Hjdpfx Aaoqwqiaozou Z-axis travel (mm): 1970 Rapid traverse X/Z (m/min): 8/10 Spindle mount: A2-8 Spindle bore (mm): 80 Spindle nose taper: MT7 Spindle speeds (RPM) with manual chuck: 27-135 / 55-270 / 160-805 / 325-1630 Gear stages: 4-speed Tool shank (mm): 32x32 Tailstock quill diameter (mm): 75 Tailstock quill stroke (mm): 150 Tailstock quill taper: MT5 Main motor (kW): 7.5 Net weight (kg): 4100 Machine dimensions LxWxH (mm): 3000×1250x1580 4. Standard Equipment • Siemens SINUMERIK 828D ShopTurn • 80 mm spindle bore • 250 mm 3-jaw chuck • Manual tailstock • Coolant and lubrication system • Full enclosure • LED work light • CE conformity 5. Stock Machine Features • Chip conveyor for 2000 mm machine • 6-position electric tool turret • Fixed steady rests (60–190 mm and 150–280 mm) • Teach-in control panel with handwheels and joystick Additional accessories available on request 6. Special Features / Benefits • Easy operation via ShopTurn • High flexibility for single-part and small batch production • Robust cast construction • Large spindle bore for bar machining • Immediately available – no delivery lead times 7. Scope of Delivery Machine including standard equipment and above-mentioned special equipment, ready for operation. 8. Delivery Time Immediately available from stock in Stockstadt.

Condition: good (used), Pressure reducer, pressure regulator -Type: D14100 -Connection Hsdob A Nzfepfx Aazeu -Inlet: max. 20 bar -Output: max. 10 mbar -Weight: 2.7 kg

Year of construction: 1981, condition: used, working width: 4100 mm metal sheet thickness: 16 mm throat: 300 mm Hjdpfxe Dig Ds Aazou rear stop: 1500 mm power: 400 V, 45 kW space needed: 4800 x 3500 x 2600 mm weight: ca. 28000 kg