Plate shear

LAMI NOVA SC 4006

Condition: ready for operation (used), Year of construction: 2015, A vertical high-performance milling and thread machining center DMG Mori is available. Travel X/Y/Z: 700mm/420mm/380mm, max. workpiece dimensions X/Y: 880mm/550mm, table dimensions X/Y: 840mm/420mm, max. table load: 400kg, spindle speed: 10000rpm, spindle power: 25kW, torque: 45Nm, tool positions: 15, tool holder: BT30, rapid traverse: 60m/min, feed force: 5kN. Machine dimensions X/Y/Z: approx. 1650mm/2350mm/2500mm, weight: approx. 4000kg, control: Siemens Sinumerik 840D Solutionline, machine hours: 28892h, spindle hours: 12674h. Documentation available. An on-site inspection is possible. Bjdpfeynlu Usx Al Ujdg

Year of construction: 2009, condition: excellent (used), machine/vehicle number: 104/1656, Size 60 x 75 cm, only for turning (without airing), with fixed control desk Machine nr: 104/1656 Bdsdpfx Alohqhcie Uog

Condition: used, Year of construction: 2007, x-travel 3.600 mm y-travel 920 mm z-travel 820 mm control iTNC530 Heidenhain B - axis +/- 90 x 1 ° C-axis 360 x 0,001 ° feed X/Y/Z-axis 1 - 20.000 mm/min rapid traverse X-axis 100 m/min rapid traverse Y-axis 60 m/min rapid traverse Z-axis 60 m/min spindle turning speed - stepless 20 - 10.000 U/min tool taper SK50 power capacity at 100 % load 32,00 kW power capacity at 40 % load 48,00 KW max. torque at 40% / 100% load 294 / 196 kW table surface area 4.200 x 900 mm number of T-slots 9 T-slot - distance 100 mm T-slots 1x 18H7 / 8x 18H12 table load capacity - central/maximum 4.200 kg Bsdpjy Sbiksfx Al Ujdg tool magazin: 80 tool diameter 115 mm wotkpiece diameter with 2 vacant positions 160 mm tool length - max. 360 mm weight of tools max. 12,00 kg total power requirement 85,00 kW weight of the machine ca. 32,00 t dimensions of the machine ca. 11,50 x 6,60 x H3,30 m Vertical machining center with HEIDENHAIN iTNC530 control, swivel milling head, partition wall, tool rack magazine with 80 positions, chip conveyor, coolant system, NC-extension table Ø700mm, operating mode 4.

Year of construction: 2008, condition: ready for operation (used), overall weight: 3,800 kg, spindle speed (max.): 600 rpm, number of axes: 5, This 5s SAACKE UWIF cylindrical grinding machine was manufactured in 2008. It features a maximum spindle speed of 600 rpm and a powerful grinding spindle peak power of 16 kW. The machine supports a variety of workpiece sizes, with a maximum diameter of Ø 20 mm and a weight capacity of 1 kg. If you are looking to get high-quality grinding capabilities, consider the SAACKE UWIF cylindrical grinding machine we have for sale. Contact us for further details. • Workpiece carrier A-axis: Direct drive/hollow shaft motor; indexing accuracy ±15"; indexing possibilities 1–999; cumulative pitch error at 100 mm: 8 µm; speed max. 600 rpm • Tool holder: ISO 50 • Spindle clearance holding sleeve: max. 28 mm (with automatic clamping: Ø20 mm) • Nominal drive power: • Grinding spindle S1-100%: 7.5 kW; peak: 16 kW • X-axis longitudinal travel: 2 kW • A-axis workpiece carrier: 2 kW • Z-axis cross slide: 2 kW • Y-axis grinding head slide height: 2 kW • B-axis grinding head rotation (rotary table): 2 kW • Position measuring systems: • A-axis: Direct measuring system • B-, X-, Y-, Z-axis: Indirect measuring system • Resolution X/Y/Z: 0.0001 mm (0.1 µm) • Resolution A/B: 0.0001° • Electrical connection: 20 kW / 50 A; operating voltage 400 V, 50 Hz; control voltage 24 V; lighting voltage 230 V; backup fuse: separate supply from mains • Compressed air: 15–17 Nm³/h; pressure min/max 6/8 bar (600/800 kPa); quality ≥ Class 4 (ISO 8573-1) • Control & software: CNC NUM Axium Power 1050 with PC, program memory 512 k; NUMROTOplus software (dongle/hardlock required); zero points calibrated using enclosed measuring instructions (no marked reference points) Bsdjyiz R Ujpfx Al Usdg Additional equipment • Workpiece changer options (automation): • Option 1: Pick-up design • Max. workpiece: Ø20 mm × 120 mm; 1 kg • Capacity per pallet: • Ø3.0–5.0 mm shank: 40 pcs • Ø5.1–8.0 mm: 32 pcs • Ø8.1–11.0 mm: 28 pcs • Ø11.1–14.0 mm: 24 pcs • Ø14.1–20.0 mm: 20 pcs • Option 2: Chain loader magazine (with gripper unit) • Capacity: 64 workpieces • Max. workpiece: Ø32 mm × 200 mm; 2.5 kg • Features: Chaotic loading of different workpieces; automatic changing of collets possible • Holding sleeves: Ø6, 8, 10, 12, 14, 16, 20 • External chain loader option: increases machine weight to approx. 3,800 kg and space to 3,000 mm × 1,875 mm • Coolant filter system (TRANSOR): To be provided by customer; air for backwashing approx. 700 Nl/min for 5 min every 6–9 hours

Condition: used, Year of construction: 1993, Technical details: sheet width: 3050 mm plate thickness: 6,0 mm distance between columns: 3460 mm no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm cutting angle: 0,5° - 3,0° ° cutting gap adjustment: manuell mm Bdodpfeu Rni Hsx Al Ueg down holder: 18 Stück (hydraulisch) Stück Table dimensions: 380 x 3100 mm total connected load: 7,5 kW weight of the machine ca.: 4,56 t dimensions of machine: L: 3,64 x B: 2,55 x H: 1,58 m Equipment: With side stop L: 1000 × W: 100 × H: 60 mm and stop bar 990 mm, with 8 supports Operation via control panel and foot switch Cutting zone lighting Stroke counter Machine feet *

Condition: used, Year of construction: 2018, Technical details: x-travel: 650 mm y-travel: 450 mm Bdjdpfx Alsy I Ak Is Ujg z-travel: 420 mm control: MAKINO Hyper i U-axis: ± 75 mm V-axis: ± 75 mm max. size of workpiece LxWxH: 1000 x 800 x 400 mm workpiece weight: max. 1500 kg Table dimensions: 910 x 710 mm weight of the machine ca.: 5 t Dimensions (L/W/H): 3 x 3 x 2,3 mm Accerories Memory 10 GB Ethernet I/P Interface Wire EDM in good condition. *

Condition: ready for operation (used), Year of construction: 2014, operating hours: 48,973 h, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 3, This DMG MORI CTX Beta 800 4a was manufactured in 2014. It features a Siemens 840 D control system, a counter spindle, and a bar machine package for enhanced versatility. The machine includes a 980-liter coolant system and a hinge type conveyor for efficient operation. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Located in Germany, contact us for more information about this machine. • 2 x 16 fold Sauter star VID 30 • Siemens 840 D • Excentric turning and milling operation • TC alternating speed • Counter spindle • Glass scales Y1, Z1, Z2, Z3, X1, X2, X3 Bdsdpfx Aox D Nd Djl Uog Additional equipment • 980 liter coolant with 8 bar/20 L and 20 bar/40 L programmed by M function • Pater band filter • Chuck rinsing device for main outside • Chuck rinsing device for counter outside • Coolant spray gun • Hinge type conveyor • Bar machine package • Window cleaning with compressed air • SK package for alu machining • Tool breakage Artis CTM

Condition: used, Year of construction: 2022, HAAS ST25Y with counter-spindle, year 2022 maximum machining diameter: 298 mm, Bdedpfx Alozk H Hvs Ujg cutting length: 572 mm, spindle through-hole: 76 mm, 12-position BMT65 turret, Y-axis travel: +/- 50.8 mm, HAAS control system, 3-jaw chuck, 254 mm, -counter-spindle -chip conveyor, -swarf tray with pump, -measuring probe, -parts catcher low operating hours, excellent condition.

Condition: used, Year of construction: 2013, x-travel 735 mm y-travel 650 mm z-travel 560 mm control 840D sl FD operate Siemens turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 35 / 24 kW max. Torque 119 Nm tool taper HSK-A63 DIN 69893 table diameter 680 mm max. table load 600 kg max. workpiece sizes 650 x 650 x 500 mm swivellable +/- 120 ° rotatable 360 ° number of toolpositions 30 pos. tool taper HSK-A63 Bdsdpfx Ajzipzysl Ueg max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8,0 kg change-time chip to chip ca. 4,9 sec feed speeds max. 40.000 mm/min rapid traverse 40 m/min total power requirement 65 kVA weight of the machine ca. 11,6 t dimensions of the machine ca. 4,0 x 3,0 x 2,95 m 5 Axis CNC - MachiningCenter Universal DMG - DMU 65 FD monoBLOCK - Swivel-Rotary-Table - without tools - only 8,444 operating hours - only 2,246 spindle hours - Air blast cooling through spindle center - MDynamics package - Power failure safety package - Coolant ring jet: 7x air jets, 13x water jets - Tropical package (35° – 50° Celsius) - Coolant unit (ICS) with two pressure levels: 40 and 80 bar - Use of special tools (18 kg / 370 mm)

Condition: good (used), functionality: fully functional, Year of construction: 2009, Used tube bending machine from Jutec Bdsdpoyfmwxofx Al Ujg Type: 5000 Capacity: up to approx. 40 mm Mandrel length: 4500 mm CNC controlled Automatic head Manually rotatable head with hydraulic clamping Incl. 3 sets of tools Year of manufacture: 2009 Very little used