Used Dunkes Hz 315 for sale (12,566)

Condition: used, Year of construction: 2011, Used 2011 Hardinge Bridgeport XR760. Supplied with Heidenhain iTNC 530 Control, 12,000 RPM Spindle with Through Spindle Coolant, 30 Station ATC, Renishaw spindle and table probing, Swarf Conveyor, Coolant Equipment & Manual Set. SPECIFICATION: TRAVELS: X Axis 760 mm, Y Axis 610 mm, Z Axis 610 mm Spindle Gauge Plane to Table (~ max) 710 mm, Spindle Gauge Plane to Table (~ min) 100 mm TABLE: Length 1000 mm, Width 600 mm T-Slot Width 18 mm, T-Slot Centre Distance 100 mm, Number of Std T-Slots 5, Max Weight on Table (evenly distributed) 900 kg SPINDLE: Max Rating 25 kW (S6 40%), Max Speed 12,000 rpm, Max Torque 159.2 Nm, Taper BT 40 Through Spindle Coolant, Coolant Flow Rate at Cutter 160 L/min, Through Spindle Coolant Pressure 20 bar (Std) FEEDRATES: Rapid and Jog (Max.) 20 m/min Cutting Feed Rate (Max.) 20 m/min BALL SCREWS: X & Y Axis 45 x 16 mm Z Axis 45 x 12 mm TOOL CHANGER: Type Rapid ATC, Capacity 30 Max Tool Diameter 125 mm (adjacent pocket), 80 mm Tool Length Max. 300 mm Tool Weight Max. 7 kg COOLANT & CHIP MANAGEMENT: Swarf Conveyor, Coolant Capacity 355 L Wash Down Standard, Wash Gun Standard, Cutter Air Blaster Standard Washdown Flow Rate 140 L/min ACCURACY – ISO 230-2: Positioning Accuracy 0.010 mm Repeatability 0.004 mm Hedpfjzzairjx Airofl GENERALS: Machine Dimensions (W x D) 2528 x 3000 mm Air Required 4.9 cfm Power Supply 25 kVA / 415 V / 3 Phase / 50 or 60 Hz Control: Heidenhain iTNC 530 Spec: X760 Y610 Z610 mm | 12000RPM | BT40 Accessories: Renishaw Probing, Through spindle coolant, 30 Position Side mount tool changer, Swarf conveyor, Chilled 12000RPM Spindle

Condition: ready for operation (used), Year of construction: 2018, stroke length: 250 mm, overall weight: 58,000 kg, Mechanical stamping press manufactured in 2018. This AIDA 315/2MR/LD/TE 3 features a press capacity of 315 tons and a stroke length of 250 mm. It has a maximum die size of 2,250 × 750 mm and can accommodate a maximum die weight of 10,200 kg. If you are looking to get high-quality stamping capabilities, consider the AIDA 315/2MR/LD/TE 3 machine we have for sale. Contact us for further details regarding this machine. • Press capacity: 315 ton • Rated capacity: 3,150 kN • Rated capacity point: 12.7 mm above BDC • Stroke length: 250 mm • Slide adjustment: 160 mm • Shut height: 700 mm • Maximum die size: 2,250 × 750 mm • Maximum die weight: 10,200 kg • Flywheel speed: 628.5 rpm • Operating speed: 15–40 spm • Maximum clutch engagements: 24 per min • Stopping time: 0.386 s • Safety distance: 618 mm • Cushion force: 3,450 daN @ 0.6 MPa • Counterbalance force: 102 kN @ 6 bar • Frame type: Double upright, double-crank • Clutch/brake system: Pneumatic • Lubrication system: Centralized automatic • Slide guiding: Precision guided • Drawing cushion: Integrated • Counterbalance cylinders: Yes • Safety system: Integrated • Operator protection: Yes • Automation ready: Yes • Drawing cushion: Integrated (Included) • Counterbalance cylinders: Yes (Included) • Safety system: Integrated (Included) • Operator protection: Yes (Included) • Automation ready: Yes (Included) • Other optional equipment: Not included Technical Specification Stamping Force 3150 Kn Hfodpfjzcptwox Airjl

Condition: excellent (used), overall weight: 60 kg, Three-jaw chuck Manufacturer: Forkhardt Hfsdpszw U Stjfx Airsl Model: F 315 Diameter: 315 mm Height: 120 mm Jaw height: 175 mm Weight: 60 kg

Condition: ready for operation (used), Year of construction: 2013, stroke length: 250 mm, overall weight: 58,000 kg, Mechanical stamping press manufactured in 2013. This AIDA 315/2MR/LD/TE 3 features a press capacity of 315 tons and a stroke length of 250 mm. It is designed for high-precision stamping operations with a robust double-upright frame and integrated drawing cushion. If you are looking to get high-quality stamping capabilities, consider the AIDA 315/2MR/LD/TE 3 machine we have for sale. Contact us for further details regarding this machine. • Main technical data: • Press capacity: 315 Ton • Rated press force: 3,150 kN • Rated capacity point: 12.7 mm above Bottom Dead Center (BDC) • Normal crankshaft stop position: Top Dead Center (TDC) • Stroke length: 250 mm • Slide adjustment: 160 mm • Shut height: 700 mm • Slide speed: 15–40 strokes/min • Maximum flywheel speed: 628.5 rpm • Maximum clutch engagements: 24 engagements/min Hodpfx Aijzcppxjrefl • Stopping time: 0.386 s • Safety distance: 618 mm • Die and working area: • Maximum die size: 2,250 × 750 mm • Maximum die weight on slide: 10,200 kg • Machine structure: • Frame design: Double upright (straight-side) frame • Drive system: Double connecting rod (double pitman) • Slide guidance: Guided slide • Motion type: Mechanical crank press • Slide movement: Vertical reciprocating motion • Main axis movement: Rotary crankshaft drive • Ram adjustment: Motorized slide adjustment • Cushion system: • Type: Integrated drawing cushion • Maximum cushion force: 3,450 daN at 0.6 MPa • Systems and safety: • Counterbalance cylinders: Yes • Counterbalance force: 102 kN at 6 bar • Clutch & brake system: Pneumatic • Lubrication system: Centralized automatic lubrication • Safety system: Integrated • Operator protection: Included • Automation ready: Yes • Performance and safety notes: • High-rigidity double-upright frame construction • Double-pitman drive for improved slide parallelism and load distribution • Pneumatic clutch-brake for reliable operation and fast stopping • Designed for integration with automatic feeding and transfer systems • Auxiliary systems: • Counterbalance cylinders: yes (counterbalance force 102 kN at 6 bar) (Included) • Clutch & brake system: pneumatic (Included) • Lubrication system: centralized automatic lubrication (Included) • Drawing cushion: integrated (Included) • Safety system: integrated (Included) • Operator protection: yes (Included) • Automation ready: yes (Included) • Other optional equipment: Not included Technical Specification Stamping Force 3150 Kn

Condition: used, Year of construction: 2011, Used 2011 Hardinge Bridgeport XR300 5AX. Supplied with Heidenhain iTNC 530 Control, 12,000 RPM Spindle with Through Spindle Coolant, Renishaw probing, 30 Station ATC, Swarf Conveyor, Coolant Equipment & Manual Set. SPECIFICATION: TRAVELS: X Axis 410 mm, Y Axis 610 mm, Z Axis 500 mm A Axis +30° to -120°, C Axis Continuous 360° TABLE: Diameter 300 mm Max Swing Diameter 300 mm, Max Weight on Table (evenly distributed) 100 kg SPINDLE: Max Rating 25 kW (S6 40%), Max Speed 12,000 rpm, Max Torque 159.2 Nm, Taper BT 40 FEEDRATES: Rapid and Jog (Max.) 36 m/min Cutting Feed Rate (Max.) 20 m/min Rotary Axis Speed 25 rpm BALL SCREWS: X & Y Axis 45 x 16 mm Z Axis 45 x 12 mm TOOL CHANGER: Type Rapid ATC, Capacity 30 Max Tool Diameter 125 mm (adjacent pocket), 80 mm Tool Length Max. 300 mm Tool Weight Max. 7 kg COOLANT & CHIP MANAGEMENT: Swarf Conveyor, Coolant Capacity 355 L Wash Down Standard, Wash Gun Standard, Cutter Air Blaster Standard Through Spindle Coolant Hjdpfx Aiszzax Tsrefl Coolant Flow Rate at Cutter 160 L/min Through Spindle Coolant Pressure 20 bar (Std) Washdown 140 L/min GENERALS: Machine Dimensions (W x D) 2528 x 3000 mm Air Required 4.9 cfm Power Supply 25 kVA / 415 V / 3 Phase / 50 or 60 Hz Control: Heidenhain iTNC 530 Spec: X410 Y610 Z610 mm A360| 12000RPM | BT40 Accessories: 5 axis Table, Renishaw Probing, Side Mount Tool Changer, Swarf conveyor

Condition: ready for operation (used), Year of construction: 2016, stroke length: 250 mm, overall weight: 58,000 kg, Mechanical stamping press manufactured in 2016. This AIDA 315/2MR/LD/TE3 features a press capacity of 315 tons and a stroke length of 250 mm. It includes a maximum die size of 2,250 × 750 mm and a maximum die weight on slide of 10,200 kg. If you are looking to get high-quality stamping capabilities, consider the AIDA 315/2MR/LD/TE3 machine we have for sale. Contact us for further details. • Main technical data: • Press capacity: 315 ton • Rated press force: 3,150 kN • Rated capacity point: 12.7 mm above BDC • Normal crankshaft stop position: TDC • Stroke length: 250 mm • Slide adjustment: 160 mm • Shut height: 700 mm • Slide speed: 15–40 strokes/min • Maximum flywheel speed: 628.5 rpm • Maximum clutch engagements: 24/min • Stopping time: 0.386 s • Safety distance: 618 mm Hfodpfszcpwisx Airel • Die and working area: • Maximum die size: 2,250 × 750 mm • Maximum die weight on slide: 10,200 kg • Machine structure: • Frame design: double upright (straight-side) frame • Drive system: double connecting rod (double pitman) • Slide guidance: guided slide • Motion type: mechanical crank press • Slide movement: vertical reciprocating motion • Main axis movement: rotary crankshaft drive • Ram/slide adjustment: motorized • Cushion system: • Type: integrated drawing cushion • Maximum cushion force: 3,450 daN at 0.6 MPa • Auxiliary systems: • Counterbalance cylinders: yes (counterbalance force 102 kN at 6 bar) • Clutch & brake system: pneumatic • Lubrication system: centralized automatic lubrication • Safety system: integrated • Operator protection: included • Automation ready: yes • Performance and safety highlights: • High-rigidity double-upright frame construction • Double-pitman drive for improved slide parallelism and load distribution • Pneumatic clutch-brake for reliable operation and fast stopping • Integrated safety and operator protection systems • Designed for integration with automatic feeding and transfer systems • Auxiliary systems: • Counterbalance cylinders: yes (counterbalance force 102 kN at 6 bar) (Included) • Clutch & brake system: pneumatic (Included) • Lubrication system: centralized automatic lubrication (Included) • Drawing cushion: integrated (Included) • Safety system: integrated (Included) • Operator protection: yes (Included) • Automation ready: yes (Included) • Other optional equipment: Not included Technical Specification Stamping Force 3150 Kn

Condition: used, functionality: fully functional, power: 105 kW (142.76 HP), fuel type: diesel, axle configuration: 4x2, color: white, driver cabin: other, gearing type: mechanical, suspension: steel, number of seats: 3, loading space length: 4,200 mm, loading space width: 2,110 mm, loading space height: 2,320 mm, Equipment: ABS, air conditioning, central locking, MERCEDES SPRINTER 315 CDI 2.2 BOX VAN – YEAR 2016 – EURO 6B – INTERNAL LENGTH 4,200 mm – WIDTH 2,110 mm – INTERNAL HEIGHT 2,320 mm – PAYLOAD 1,000 KG – ENGINE 2,143 cc – 143 HP – EURO 6B – 105 kW – ABS – AIR CONDITIONING – CENTRAL LOCKING – CD RADIO – 3 CAB SEATS – ELECTRIC WINDOWS – CD RADIO – OVERHEAD SHELF – FOR INFO: FRANCESCO 3356514297 Hfodpfxoxr Ilpe Airol

Condition: used, Year of construction: 1965, core drilling diameter max. 50 mm bore depth 2000 mm swing diameter mm drilling capacity diameter max. 110 mm total power requirement 30 kW weight of the machine ca. 10 t Drilling Ø, approx. 2 - 50 mm Boring Ø, approx. 100 mm Hfodpfx Aijt Hwucjrjl Drilling depth, max. (see stroke / mounting length) 1,600 - 2,000 mm Stroke of drilling slide, approx. 4,000 mm Distance between the two spindle heads 5,000 mm Height of centres above guideways 350 / 450 mm Drilling feed of drilling slide, infinitely variable 20 - 200 mm/min Quick feed of drilling slide 2,500 mm/min Spindle speeds via belt disks 260 - 650 / 650 - 1,625 rpm Workspindle drive 24 kW Drive of coolant pumps 1 x 7.5/15 kW and 1 x 15/28 kW Total electrical load, approx. 60 kW - 380 V - 50 Hz Total length of machine / guideways 7,500 / 5,000 mm Weight, approx. 10,000 kg Accessories / Special Features * Machine consists of the following elements: Main spindle on the left-hand side, followed by the coolant oil supply device. Table group, driven by ball screw spindle. Coolant oil supply device with elevated height of centres. At the end is a headstock, Type B 16, with drive motor approx. 7.5 kW, n = 900/2400 and 2400/6000. Large coolant device with filter unit. Large selection of accessories and drilling tools with Ø up to 100 mm. * Machine is suitable for working with a rotating workpiece together with a fixed drilling tool (ELB and BTA Process), as well as for a fixed workpiece and a rotating drilling tool. It can work with internal oil feed (Elb) or with external oil feed (BTA). * Complete oil coolant unit with tank and filter and two SIG high pressure pumps. Number of litres can be set: 17 / 40 / 120 or 220 / 500 litres per minute. Capacity approx. 2,500 l. * Feed of main slide is via ball screw spindle and infinitely variable DC motor. Mounted on the main slide is at present a table, approx. 800 x 800 mm, cross-adjustable approx. 500 mm, and suitable for holding cubic and cylindrical workpieces. Electric control via cam rail, approx. 2,500 mm long. End switch for quick feed, feed and return. * 2 closed 3-point steady rests. * FORKHARDT 3-Jaw Chuck, manually operated, Ø approx. 315 mm. * Modernized control panel with speed display, feed setting and display, display for kW, switch for feed, quick feed, right/left, etc. * 2 separate switch cabinets, separate coolant oil display device, bushes, reducers, clamping helps and lots of other accessories. This is a very valuable machine because of all the accessories!

Condition: excellent (used), Year of construction: 2004, type of input current: three-phase, input voltage: 400 V, total length: 4,700 mm, total height: 4,380 mm, total width: 4,220 mm, SALE OF AUTOMATIC PALLETIZER NOWAK NPS 1200 For sale: Automatic palletizer NOWAK NPS 1200, year of manufacture 2004, in very good technical condition, fully operational and in use until decommissioning. The machine is ideal for palletizing bags/packages in industrial automation systems. — Key machine information: • Model: NPS 1200 • Manufacturer: NOWAK Palettiersysteme GmbH • Capacity: up to 1,200 bags per hour (according to specification – page 1 of the documentation) • Compatible pallet types: • EURO pallets 800 × 1200 mm • Single-use pallets 800 × 1200 mm • Industrial pallets 1000 × 1200 mm (see page 1) — Equipment and modules included (according to page 2 of the documentation): • Empty pallet magazine – capacity: 12 pcs, automatic loading into pallet lift • Full pallet lift (up to 1,200 kg) with frequency inverter drive • Loading tables with V2A sheet covering, driven by synchronous belts • 3 × side presses for product layer centering • Scraper for product positioning on tables • Bag turner (90°–180°) with automatic adjustment • Indexing conveyor, width 1000 mm, length 1000 mm • Empty pallet conveyor 1800 mm and full pallet conveyor • Additional infeed conveyors – length 6000 mm • Operator platform and service stairs • Control panel on platform • Safety fencing with safety sensors, optical safety barriers Control cabinet includes: • Siemens S7 controller (CPU 315) • KTP 700 panel • SEW frequency inverters • New electrical sensors and wiring — Technical data (see page 3 of the documentation): • Length: 4700 mm • Width: 4220 mm • Height: 4380 mm • Power supply: 3 × 400 V, 50 Hz • Power consumption: approx. 18 kW • Conveyor height: standard 2900 mm • Pallet exit height: 550 mm • Color: Hammerschlag Malachite Green • Moving components: Yellow RAL 1023 — Condition: • Used, in very good, complete condition • Regularly serviced • Documentation and photos available upon request — Hfsdpfxsxwy Dhj Airel Price To be agreed – please contact us for an offer.

Condition: new, Stable steel-cast iron construction High-precision format sliding carriage made of anodized aluminum with a travel distance of 2250 mm Maximum saw blade diameter of 315 mm, saw blade adjustable by 45° Large fence frame (960 x 600 mm) with an extendable aluminum telescope stop up to 2660 mm Heavily ribbed planer worktables made of cast iron, annealed and stress-relieved for decades of stability and flatness Helical steel infeed roller for uniform material feed Three milling speeds, manually adjustable Milling spindle with clockwise/counterclockwise rotation Three independent industrial motors With lockable main switch, motor protection switch, emergency stop switch Planer table width 410 mm Planer table length 1810 mm Maximum chip removal 4 mm Thickness table length 605 mm Thickness table width 410 mm Working height min. 3 mm Working height max. 230 mm Feed rate 7 m/min Maximum chip removal 4 mm Dust extraction port diameter 4 x 120 mm Planer cutterhead type TERSA (3 pcs) Planer cutterhead diameter 72 mm Speed 5200 min⁻¹ Circular saw fence length 2250 mm Cutting width with parallel fence 900 mm Max. crosscut width to the left of the saw blade 2310 mm Saw blade tilt 90 – 45 ° Max. cutting height at 90° 90 mm Max. cutting height at 45° 63 mm Saw blade diameter 315 mm Saw blade speed 4000 min⁻¹ Sliding carriage and table Format sliding carriage length 2600 mm Spindle diameter 30 mm Speeds 3500/7000/10000 min⁻¹ Milling tool diameter max. adjustable/non-adjustable 180/210 mm Power of drive motor 3 x 5.0 kW, 400 V, 50 Hz Machine weight approx. 560 kg INCLUDED OPTIONS Hsdpoiiynnofx Airjfl - Handwheel with gravity-assisted numerical display for thickness table positioning - Sliding carriage length 2600 mm - Professional fences - "TERSA" planer cutterhead - Clockwise/counterclockwise rotation of the milling cutter

Condition: good (used), Year of construction: 2017, Standard turning diameter 150mm, maximum cutting diameter 255mm, maximum cutting length 685mm , Hsdpozwm Hpsfx Airsfl Bar capacity main spindle 51mm, spindle speed 5,000rpm, sub-spindle 5,000 rpm, C axis 0.001 degrees, 3 x turrets 24 stations, Y axis +/-45mm, milling speeds 6,000 rpm, main spindle 15kw, Fanuc 31i, swarf conveyor, barfeed unit, parts catcher

Year of construction: 2013, condition: ready for operation (used), Smipack BP800AS Monoblock automatic shrink wrapper with an inline infeed and a pneumatic sealing bar Maximum Output: Up to 12 packs per minute (ppm) Sealing Bar Size: 760 mm Hfjdoz Arh Aspfx Airjl Product Maximum Height: 380 mm Maximum Pack Length: 1200 mm Maximum Film Reel Size: 750 x Ø 350 mm Max film width: 750 mm Advised Film: LDPE 20 – 100 µ Power Supply: 220–240 V / 380–415 V (3PH + PE / 3PH + N + PE, 50/60 Hz) Installed Power: 17,180 W Air Pressure: 6 Bar Required Air: 13 Nl/p (normal liters per pack) Machine Net Weight: 625 kg Machine Dimensions: 2840 x 1410 mm (Height: 2105 – 2265 mm) Key Features FLXMOD® control system with a 7-inch full-colour touch screen and PLC.Memory Can store up to 50 different working cycles. Tunnel Conveyor: Built with heat-resistant glass fiber bars that support up to 30 kg and prevent rust. Infeed: Motorized upper and lower film unwinding with inverter-controlled adjustable speed.

Condition: new, Year of construction: 2018, functionality: fully functional, Schneider Electric Masterpact NW32HF 3200 A four-pole drawout switch-disconnector, supplied with its matching withdrawable cradle/chassis. Heavy-duty low-voltage switching device suitable for use as a main incomer, bus-coupler or isolating switch in industrial distribution boards, generator systems, data centres and other high-current electrical installations. This is a switch-disconnector, not a circuit breaker with an electronic protection trip unit. The photographed configuration corresponds to the Schneider Masterpact NW32HF 4-pole, 3200 A drawout version. Technical details Manufacturer: Schneider Electric Series: Masterpact NW Model: NW32HF Schneider reference: 48321 Equipment type: Switch-disconnector / isolator Rated current: 3200 A Number of poles: 4 Version: Drawout / withdrawable Rated operational voltage: 690 V AC Frequency: 50/60 Hz Rated insulation voltage, Ui: 1000 V Rated impulse withstand voltage, Uimp: 12 kV Rated short-time withstand current, Icw: 85 kA / 1 second Hodpfxezlivpe Airefl Rated short-circuit making capacity, Icm: 187 kA peak Utilisation category: AC-23A Standard: IEC 60947-3 Manual Push ON / Push OFF operating mechanism Rear high-current terminal connections Withdrawable cradle/chassis included Schneider identifies reference 48321 as a 3200 A, 690 V, four-pole drawout Masterpact NW32HF switch-disconnector

Condition: ready for operation (used), Year of construction: 2005, operating hours: 40,135 h, spindle speed (max.): 3,000 rpm, travel distance X-axis: 296 mm, travel distance Z-axis: 1,090 mm, total height: 1,950 mm, total width: 1,550 mm, overall weight: 5,500 kg, controller manufacturer: FANUC, controller model: Series 21i-TB, product length (max.): 3,700 mm, number of axes: 2, CNC Slant-Bed Turning Center manufactured in 2005. This CMZ TBI-520 features a maximum swing over bed of 520 mm and a maximum turning length of approximately 1,100 mm. It is equipped with a 12-station turret and a hydraulic 3-jaw chuck with a diameter of 315 mm. If you are looking to get high-quality turning capabilities, consider the CMZ TBI-520 machine we have for sale. Contact us for further details. • Electrical supply: 380 V / 50 Hz / 62 A • CE compliant • Working capacity: • Max swing over bed: 520 mm • Max swing over cross slide: 420 mm • Max turning length: approx. 1,100 mm • Distance between centers: 1,100 mm • Rapid traverse: • X-axis: 18 m/min • Z-axis: 18 m/min • Spindle: • Spindle bore: approx. 82 mm • Bar capacity: approx. 77 mm • Turret: • 12-station turret • Fixed tool holders only • No C-axis • Tailstock: hydraulic • Operating hours: approx. 40,135 h • Machine powered and available for inspection Hfjdpfx Aszq Ay Eeirsl • Condition: well maintained Additional equipment • Hydraulic 315 mm 3-jaw chuck (SMW‑Autoblok) • Chip conveyor • Automatic lubrication system • Coolant system • Work light Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), Year of construction: 1991, swing diameter 400 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : WMW - GLAUCHAU Hydraulic Internal Grinding Machine with Face Grinding Device model SI 6/1 AS-N x 315 year 1991 Internal grinding diameter 40 - 400 mm Internal Grinding depth, max. 315 mm Max. grindable External dia. 400 mm Weight of workpiece without steady, max. 630 kg Workpiece Swing Ø, with / without safety hood, max. 500 / 600 mm Height of centre above table 360 mm 16 step workpiece spindle speeds 40 – 400 rpm Workpiece spindle bore, approx. 53 mm Workpiece headstock swivelling max. 30 ° Adjustment of workpiece headstock position crosswise, max. 400 mm Automatic cross traverse of grinding head 70 mm Adjustment of grinding head position on slide crosswise, approx. 100 mm Feed of grinding head, intemittendly 0.001 – 0.025 mm/stroke Feed of grinding head, continually 0,1 – 1 mm/min Table stroke, max. 630 mm Table speeds infinitely variable 0,1 – 8 m/min (10 m/min) Distance workpiece headstock and grinding slide, max. 1,250 mm Adjustment of Grinding spindel stock on table 520 mm Spindle drive, approx. 7.5 kW Total electrical load, approx. 17 kW - 380 V - 50 Hz Weight, approx. 6,000 kg Accessories / Special Features: • Universal internal grinding spindle head with automatic cycles to grind cylindrical and conical bores with one or multiple diameters, external diameters and grinding of narrow end-faces. Hsdpfxoxyllvj Airofl • Face grinding device, hydraulic swivel-in, with automatic cycles to grind end-faces, multiple end-faces and two tiered end-faces simultaneously • Electronic cycle control with control tableau to set up all the grinding and dressing cycles including ampere-meters for internal grinding spindle and face grinding spindle • Belt-type grinding spindle drive with mounted grinding spindle and 5 pieces separate interchangeable grinding spindles along with various pulleys with various diameters. • Dressing device for both grinding spindles • HEIDENHAIN Digital Read-Out for the cross adjustment of the Workpiece headstock • A large amount of operating tooling and accessories as : 4-jaw Faceplate Ø approx. 520 mm, 3-jaw chuck Ø approx. 380 mm, 3-jaw-chuck Ø approx. 130 mm, pulleys, spindle sleeves, grinding flanges, foot switch, • Separate hydraulic unit, built on switch cabinet, coolant device with magnetic separator. Condition : very good, universal machine for all sorts of grinding tasks ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Condition: excellent (used), pressure 16 t weight of the machine ca. 16 t Hfjdpfx Aoyrhmhoirel

Condition: good (used), Year of construction: 1973, pressing force: 315 t, table width: 1,500 mm, table length: 2,500 mm, Hydraulic 4-column press, manufacturer FIBRO, year of manufacture 1973, pressing force 315 t. Dimensions approx. 3.0 m × 1.6 m × 4.5 m. Table size: 2.5 m × 1.5 m. Separate hydraulic unit and control panel. Hfodpfex Nhaksx Airel Maximum working area 883 mm (ram fully retracted). Powered, can be inspected on site. All information has been provided to the best of our knowledge and belief. Subject to change, errors, and prior sale.

Condition: excellent (used), Year of construction: 2011, operating hours: 200 h, functionality: fully functional, machine/vehicle number: C2250D5 / QSK60-G4, overall weight: 15,500 kg, fuel type: diesel, color: light blue, power: 2,000 kW (2,719.24 HP), output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 1,800 kW (2,447.32 HP), nominal power (apparent): 2,250 kVA, motor manufacturer: Stamford / CUMMINS, type of cooling: air, rotational speed (min.): 1,500 rpm, DUAL SWITCHING 50/60HZ 3 X CUMMINS Serial number 33184290 (QSK60-G4) 2,250 kVA ✔️ engine Cummins QSK60-G9 ✔️ alternator Stamford HCI 734F ✔️ year of manufacture 2010 Runtime hours 100> 75-91 hrs Iron Flag Global LIMITED (UK) is offering of four high-performance Cummins QSK60 G9 diesel generators, professionally removed from a decommissioned data centre environment for 18 years We have specialized in only full data centre decommissioning, asset recovery, and controlled removals—so equipment is handled methodically, powered down correctly, documented, and preserved for resale. The result: exceptionally stable, low-hour machines with known provenance. These units are ideally suited for data centres, hospitals, industrial plants, utilities, and other mission-critical applications where reliability is non-negotiable. Custom enclosures with all the bells and whistles! Lower than 100hrs per generators. Generator ratings (each): THERE ARE THREE UNITS IN TOTAL - ONE HAS BEEN PURCHASED. ALSO THE TWO CUMMINS CONTROL SYSTEM AND ADDITIONAL INCLUDED,. - Standby: 2,250 kva Total package capacity: - 2250 kVA standby - 2000 kVA prime 2 UNITS AVAILABLE. Key specifications: - Engine: Cummins QSK60-G9 - Alternator: Stamford HCI 734F - Voltage / Frequency: 400 V | 50 Hz 60hz - DUAL VOLTAGE ALTERNATOR - Year of manufacture: 2010 - Running hours: ~75 hours - Tier IIII - Condition: Excellent – load-bank tested, fully operational, complete documentation Included with the package: - PowerCommand 3201 + Digital Master Control (full synchronisation & paralleling) - Radiators, exhaust systems, silencers - Fuel systems - Full technical documentation, manuals, and service history - Indoor installation history (no harsh environmental exposure) Availability: - Immediately available – United Kingdom - On-site inspection or video inspection available - Global shipping and logistics support can be arranged These generators are a strong fit for projects demanding absolute reliability, long-term stability, and predictable performance. Having been removed by Iron Flag as part of a controlled data centre decommissioning, they offer confidence you do not get with unknown or distressed assets. Hfsdpsx R Szuefx Airel Contact Joshua Alexander Iron Flag Global Limited

Condition: used, Year of construction: 1994, total length: 4,100 mm, total width: 1,900 mm, total height: 1,750 mm, Colour: Blue Weight: 6.500 kg Hsdpey Nk R Sefx Airjfl - Year: 1994 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 10.769/94 - Drive system: Conventional - Control system brand: Elgo - Drive type: Hydraulic - Configuration: Swing-beam - Power [kW]: 16.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3150 - Throat depth [mm]: 160 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: None - Finger guard: Fixed with lift-up guard - Angle adjustment: Motorized - Options: Digital readout - Transport dimensions: 4100mm x 1900mm x 1750mm (l x w x h) - Transport weight [kg]: 6500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm, No reserve price – guaranteed sale to the highest bidder! The machine is sold with collets, holders, and additional accessories! For more Schütte multi-spindle machines available at the same location, see below! TECHNICAL DETAILS Max. turning length: 80 mm Max. drilling depth: 80 mm Maximum bar diameter round: 32 mm Maximum bar diameter square: 22 mm Maximum bar diameter hexagonal: 27 mm Maximum bar diameter octagonal: 29 mm Hfedpfez Ag Ansx Airjl Spindle circle diameter: 300 mm Standard bar feed: 125 mm Special bar feed: 290 mm Normal longitudinal slide total travel: 100 mm Normal longitudinal slide working travel: 80 mm Special longitudinal slide total travel: 145 mm Special longitudinal slide working travel: 115 mm Cross slide upper slide total travel: 50 mm Cross slide upper slide working travel: 33 mm Cross slide middle slide total travel: 50 mm Cross slide middle slide working travel: 30 mm Cross slide lower slide total travel: 60 mm Cross slide lower slide working travel: 37.5 mm Maximum material passage: 32 mm Maximum material feed: 125 mm MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Coolant capacity: 700 l Pump: E-submersible pump Pump capacity: 180 l/min EQUIPMENT Rapid drilling device Gripper device Reaming device Independent auxiliary longitudinal control Motorized cross slide adjustment Collets Holders Additional accessories

Condition: used, mileage: 766,000 km, power: 338 kW (459.55 HP), first registration: 11/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, MAN TGX 18.460 – HIGH VOLUME – RETARDER – 2 TANKS – ACC – LANE KEEPING ASSIST – 2 SLEEPER CABINS – 315/70 R22.5 TIRES (FRONT & REAR) – STAND HEATER – ----VEHICLE HISTORY * GERMAN VEHICLE * VIDEO AVAILABLE UPON REQUEST * VEHICLE IS A HIGH-VOLUME VEHICLE WITH 315/70 R22.5 TIRES!! VEHICLE EQUIPMENT * AUTOMATIC TRANSMISSION * RETARDER * CRUISE CONTROL * DISTANCE CONTROL * LANE KEEPING ASSIST * ACTIVE BRAKE SYSTEM * STAND HEATER * AIR CONDITIONING * DIFFERENTIAL LOCK * REFRIGERATOR * 2 SLEEPER CABINS * FULL AIR SUSPENSION * 2 TANKS * TIRE SIZE (FRONT & REAR): 315/70 R22.5 ---- EXPORT REGISTRATION CUSTOMS EXW IN 10 MINUTES (AUTHORIZED EXPORTER) 5 DAYS, 15 DAYS, 30 DAYS LICENSE PLATES, AND 15 DAYS AUSTRIAN LICENSE PLATES EURO 1 TECHNICAL DATA SHEET VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE EMAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID. For sales to EU and third countries, a deposit of at least €500.00 / €1,000.00 will be charged. Subject to change, errors and prior sale! Hfodjzz Ugrjpfx Airsl You can find more vehicles on our website. Sales are made exclusively according to our terms and conditions – see homepage. Important note – Important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: excellent (used), Year of construction: 2010, Helmerding Press Type: KDH 315/2100/2 Pressing force: 3,150 kN Stroke height: 40–200 mm Strokes per minute: 20–100 min⁻¹ Ram adjustment: 120 mm Shut height: 500 mm Table size: 2,000 x 1,200 mm Ram surface: 2,000 x 1,100 mm Machine weight: 44,000 kg Helmerding Roller Feeder Type: EWH 800/150 Strip width: 100–800 mm Strip thickness: 0.5–6.0 mm Helmerding Straightening Machine Type: R-70/800/9-S Strip width: 100–800 mm Strip thickness: 0.5–5.0 mm Roll diameter: 70 mm Number of straightening rolls: 9 pcs Helmerding Decoiler Type: HE-4/800/MOT/HYD Strip width: 100–800 mm Max. coil weight: 4,000 kg Coil inner diameter: 508 mm Hfedpfx Ajzlpnreirol Coil outer diameter: 1,000–1,600 mm

Condition: used, Year of construction: 2003, operating hours: 34,900 h, functionality: fully functional, machine/vehicle number: 112253, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 410 mm, controller model: Brother CNC-A00, total length: 2,250 mm, overall weight: 2,250 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 26, BROTHER TC-22A – 5 AXIS - Manufacturer: Brother - Model: TC-22A - Serial Number: 112258 - Year: 2003 - Machine Type: CNC Vertical Machining / Tapping Center - CNC Control: Brother CNC-A00 - Number of Axes: 5 - X-Axis Travel: 500 mm - Y-Axis Travel: 400 mm - Z-Axis Travel: 410 mm - Table Size: 650 × 400 mm - Maximum Table Load: 200 kg - Distance Table to Spindle Nose: 200–610 mm - Spindle Taper: HSK-A40 - Spindle: 1 - Spindle Speed: up to 12,000 rpm standard - Tool Magazine: 26 tools - Maximum Tool Diameter: 55 mm - Maximum Tool Diameter with Adjacent Pockets Empty: 125 mm - Maximum Tool Length: 200 mm - Tool Change Time: approx. 0.7 sec - Rapid Traverse X/Y/Z: 56,000 mm/min - Spindle Motor: approx. 7.7 kW / 10 min rating Hedjz Akqvjpfx Airofl - Power Supply: AC 200 V, 50/60 Hz - Maximum Power Requirement: 25 kVA - Rotary / Swivel Table: Installed - 5-Axis Configuration: 3 linear axes + 2 rotary/swivel axes - Coolant Treatment System: Included - Coolant / Lubricant Pump: Included - Machine Dimensions / Required Floor Space: approx. 1,671 × 2,846 mm - Machine Height: approx. 2,274 mm - Machine Weight: approx. 2,250 kg

Condition: new, Multi-function machine with aluminum sliding table for sawing, milling, planing/thicknessing, and optional long-hole drilling. torsion-resistant, steel-cast iron construction machine table made of cast iron, hardened and ground smooth-running, anodized aluminum sliding table, 10-year SCM warranty on wear of the slide guides large fence system with extendable aluminum telescopic stop and folding stops with combination saw-tenon stop with 45° quick adjustment max. saw blade diameter 315 mm with optional scoring unit, swiveling from 90°-45° Hfsdpfx Aioiiypperel helical steel infeed roller for consistent wood feed during thicknessing four milling speeds, manually adjustable standard with right/left rotation of the milling spindle three independent motors for each working unit sliding table with ball contact system equipped with a ball contact system that has proven its worth millions of times permanently smooth running due to hardened and ground guides not susceptible to dust and dirt due to minimal contact point between the ball and trapezoidal rail The dust extraction ports for the planer and thicknesser are on the same – right – side. The dust extraction hose can therefore be used for both types of planers from the same side. helical steel infeed rollers for a constant and even workpiece feed massive anti-recoil guards for the operator's safety 3-knife cutterhead ensures an optimal planing result Fencing length 1600 mm max. saw blade diameter with scoring unit 315 mm max. cutting height at 90° / 45° 100/79 mm max. crosscut width to the left of the saw blade 1660 mm cutting width on the parallel stop 800 mm saw blade speed 3500 rpm saw blade tilt 90° - 45° Working width 300 mm planer table length 1260 mm planer shaft diameter / number of planing knives 72 mm / 3 pcs. Table dimensions 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm feed rate 7 m/min Milling spindle diameter 30 mm Useful length of milling spindle 100 mm max. tool diameter 180 mm, can be countersunk Spindle speed 3500/600/800 rpm Motor power 3 x 4 kW, 400 V, 50 Hz Dust extraction port diameter 4 x 120 mm Dust extraction port diameter saw blade guard 60 mm Weight 430 kg OPTIONS: - Professional stops EUR 300.— Saw stop with quick-release lock and micrometric adjustment Planer stop with 90° ÷ 45° with continuous adjustment - Scoring unit incl. saw blade EUR 292.— - Handwheel with numerical display for thickness table positioning EUR 129.— - Feed device EUR 119.— - 2 additional handwheels for unit adjustment EUR 45.— - TERSA cutterhead DM 72 mm EUR 212.— - Xylent spiral cutterhead with 3 rows of knives EUR 717.— - Aluminum long-hole drilling device EUR 390.— - 2 stop flaps on the crosscut fence EUR 150.—

Condition: used, Year of construction: 2016, functionality: fully functional, overall weight: 2,000 kg, power: 720 kW (978.93 HP), color: black, output voltage: 400 V, continuous power (apparent): 800 kVA, output frequency: 50 Hz, Containerized Rotary UPS System Featuring Marelli Generator MJB 400 LB4 B2 & Rotabloc Flywheel Technology Model:MJB 355 MB4 B2 Rated Power: 900 kVA, 400V / 920 kVA, 440V Active Power: 720 kW Voltage: 400 V / 440 V Frequency: 50 Hz / 60 Hz Rated Current: 1155 A, 400V / 1207 A, 440V Speed: 1500 / 1800 rpm Hsdpowx H Hzofx Airefl Power Factor: 0.8 Insulation Class: H Weight: 1950 kg Protection class: IP23 Bearings: 6317 C3 Lubrication: Mobil Polyrex EM Rotabloc RBT Alternator (Flywheel-Based UPS) Model Type: MJB-355 UPS Power Limitation:500 kVA Voltage Range: 400 V ±12.5% Current: 722 A Frequency: 50 Hz Speed: 1500 rpm Weight: 1950 kg Manufactured in Belgium Features & Benefits Rotary UPS – No batteries required Compact footprint with integrated cooling Ideal for grid stability and critical systems Reliable European engineering (Belgium & Italy) CE marked, ready for international use