Used Dunkes Hz 315 for sale (12,613)

Condition: ready for operation (used), Year of construction: 2016, operating hours: 152 h, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period from September 21st to October 1st! Spindle replacement for €40,000 in 2025! Since then, only approximately 150 spindle operating hours! TECHNICAL DETAILS Travel range X-axis: 650 mm Travel range Y-axis: 550 mm Travel range Z-axis: 500 mm Feed rates Feed rate X-axis: 30 m/min Feed rate Y-axis: 30 m/min Feed rate Z-axis: 30 m/min Spindle Spindle mounting: HSK-E 40 Spindle speed: 42,000 rpm Spindle operating time: 151 h 20 min 08 s Gujdpfx Aez Aplxon Ieg Spindle replacement: 2025 Cost of spindle replacement: approx. €40,000 Tool magazine Number of tool positions: 40 Pallet system Pallet dimensions: approx. 320 × 320 mm Pallet clamping: Rotary table MACHINE DETAILS Mains voltage: 400 V Mains frequency: 50 Hz Control voltage: 24 V DC Maximum fuse rating: 63 A Connected power: 38 kVA Dimensions and weight Overall height: 2,850 mm Overall length: 3,300 mm Overall width: 2,400 mm Machine weight: 9,000 kg EQUIPMENT - Technical documentation - Manual - HSK-E 40 tool holders - 3 pallets External reference: Demo - Lot 5

Year of construction: 2018, operating hours: 10 h, condition: good (used), functionality: fully functional, Subject: RZ125-315 pump with diffuser, impeller for water with blades - Pump operating parameters: Q = 80-150 m³/h H = 14.7-12.5 m - Material: cast iron, grade ŻL250 - Sealing: rope seal - With 3SIE160L-6 motor, 11 kW, 960 rpm, 400V Gusdpfx Aoztxvnen Ijg 2. Quantity: 2 pcs.

Condition: used, Single-column eccentric press HELMERDING Type EH 25 B Machine No. 5917 Year of manufacture: 1993 Pressing force: 25 tons Throat depth: 180 mm Table area: 560 x 360 mm Ram area: 315 x 150 mm Table through-hole: 150 x 100 mm Stroke adjustment: 8 - 82 mm Ram adjustment travel: 60 mm Installation height max.: 330 mm Clamping pin bore: Ø 40 mm Strokes per minute: 145 Table height adjustment: 150 mm Table height above floor: 630 - 780 mm Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Hydraulic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand control - Automatic central lubrication by BEKA lubrication system - Electrical cabinet with 2-channel contactor control - Press table height-adjustable via 2 threaded spindles - UVV [accident prevention regulations] according to VBG 7n 5.1 for manual loading operations - Electrical diagram Space requirements (L x W x H): 1600 x 1100 x 1900 mm Weight: 2 tons Gujdpfxjyath Ts An Isg Good condition

Condition: excellent (used), Year of construction: 2022, operating hours: 7,800 h, functionality: fully functional, machine/vehicle number: Puma 2600, turning diameter over cross slide: 630 mm, turning length: 1,245 mm, turning diameter: 376 mm, spindle bore: 102 mm, spindle speed (max.): 2,800 rpm, spindle motor power: 26 W, type of input current: three-phase, controller manufacturer: FANUC, number of spindles: 2, operating hours of spindle: 7,800 h, number of slots in tool magazine: 12, Equipment: chip conveyor, For sale: Turning center with sub-spindle and Y-axis. Machine in perfect condition. Purchased new in mid-2023. Currently in operation, with less than 8,000 operating hours; parts produced well below its technical capacity. Serviced exclusively by an authorized distributor. Adapted for robot operation: equipped with autodoor and external communication signals. Features include parts conveyor and oil mist filter. NOTE: The robot is not included in this offer – separate sale and integration support can be offered upon individual quotation. TECHNICAL DATA according to manufacturer’s specification: Guodpfxjx Rqkuo An Iog 1) Capacity Swing over bed: 680 mm Swing over cross slide: 630 mm Max. turning diameter: 376 mm Recommended turning diameter: 315 mm Max. turning length: 1245 mm Max. workpiece weight (incl. chuck): In chuck: 500 kg (with support: 1000 kg) Bar capacity in spindle: 102 mm 2) Main Spindle Chuck: 315 mm Spindle nose: A2#11 ASA Front spindle bearing diameter: 160 mm Spindle bore: 115 mm Chuck through hole: 103 mm Spindle motor power (S3-25%/S6-60%/S1 Continuous): 26/22/18.5 kW Spindle speed range: 2 - 800 rpm Max. spindle torque (S3-15%): 1123 Nm Power transmission: Belt 3) Sub-Spindle Chuck: 175 mm (optionally 210 mm) Spindle nose: A2#5 ASA Spindle bore (diameter): 62 mm Sub-spindle cylinder bore: 50 mm (H8) Spindle motor power (continuous/30 min): 7.5/5.5 kW Sub-spindle speed range: 4,500 rpm Max. spindle torque (30 min): 85 Nm Power transmission: Belt 4) Axis Travel X axis: 260 mm Z axis: 1350 mm Y axis: 105 (±52.5) mm B axis: 1350 mm C axis (1, 2): 360° (0.001° increments) Rapid traverse: X axis: 30 m/min Z axis: 30 m/min Y axis: 10 m/min B axis: 30 m/min C axis: 200 rpm 5) Bed and Saddle Slant bed, tilt angle: 30° Bed guideway (Z axis): 437 mm Saddle (X/Y axis): 321/325 mm Sub-spindle stroke: 335 mm 6) Tooling System Tool holders: BMT 65P Number of tools: 12 Tool size: 25 x 25 mm Max. drill diameter: 50/32 mm (main/sub-spindle) Driven tool motor power (5 min/Cont): 7.5/1.5 kW Driven tool speed: 5,000 rpm Driven tool max. torque: 95.5 Nm Driven tool collets (ER32): Φ3–Φ20mm (option) Turret indexing time: Single position: 0.15 s (1.2 s full station) Max. driven tool drilling diameter: φ20 mm, M20 x P2.5 7) Hydraulic System Tank capacity: 20 l Flow rate (60/50 Hz): 25 / 20.8 l/min Power/Pressure: 2.2 kW x 5.0 MPa 8) Coolant Tank capacity: 250 l Flow rate: 30 l/min Power/Pressure: 0.7 kW x 0.15/0.1 MPa (60/50 Hz) 9) Machine Accuracy Positioning: 0.01 mm Repeatability: 0.02 mm C Axis Positioning: 0.0167° Linear repeatability (axes X/Z/Y): ±0.002/±0.003/±0.003 mm C Axis repeatability: ±0.006° 10) Control System Full electric control for X, Y, Z, C axes For further questions or additional information, please feel free to contact us by message or phone.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, turning length: 1,050 mm, turning diameter: 465 mm, spindle speed (max.): 3,250 rpm, overall weight: 7,600 kg, controller manufacturer: Heidenhain, TECHNICAL DETAILS Maximum turning diameter: 465 mm Maximum swing diameter: 680 mm X-axis travel: 300 mm Z-axis travel: 1,050 mm Turning length: 1,050 mm Maximum spindle speed: 3,250 rpm Spindle bore: 76 mm Torque at 40% duty cycle (ED) max.: 630 Nm Torque at 100% duty cycle (ED): 420 Nm Number of tool positions in tool turret: 12 stations Chuck diameter: 250 mm Gujdpfx Asz Apdusn Ijg Maximum workpiece weight between centers: approx. 350 kg MACHINE DETAILS Control system manufacturer: Siemens Spindle power at 40% duty cycle (ED): 33 kW Spindle power at 100% duty cycle (ED): 22 kW Electrical connection: approx. 50 kVA Mains connection: 400 V Frequency: 50/60 Hz Dimensions & Weight Dimensions with chip conveyor: approx. 5,300 × 1,900–2,200 × 1,700–2,000 mm Machine weight: approx. 7,500 kg EQUIPMENT Chip conveyor

Condition: ready for operation (used), Year of construction: 2020, operating hours: 7,597 h, functionality: fully functional, machine/vehicle number: NL257200651, turning diameter: 366 mm, spindle speed (max.): 4,000 rpm, controller model: Mitsubishi 730UM CELOS, working length: 700 mm, number of slots in tool magazine: 12, TECHNICAL DETAILS Maximum machining length: approx. 700 mm Maximum turning diameter: 366 mm Workpiece length with tailstock: max. 728 mm Spindle speed: max. 4,000 rpm Tool turret: 12-position BMT60 star turret Tool drive: 40 / 14 Nm Speed of driven tools: max. 10,000 rpm Overhang length of driven tools: 100 mm Chuck: 10" hollow chuck, Ø 254 mm Chuck cylinder: hollow chuck cylinder BB210A821 Tailstock: NC tailstock Tailstock taper: MK 5 MACHINE DETAILS Coolant type: water-miscible coolant / emulsion Coolant pressure: 5 bar Extraction connection: Ø 150 mm Mains voltage: 380 V Frequency: 50 Hz Transformer power: 45 kVA Phases: 3 phases Isolation transformer: 400 V ± 5 % Current: 65 A Control system: Mitsubishi 730UM CELOS User interface: CELOS with ERGOline touch panel Machine operating time: 7,597 h Program runtime: 2,138 h Last maintenance: April 2024 Weight: 5,800 kg EQUIPMENT DMG MORI M730UM control system with CELOS ERGOline touch panel 12-position BMT60 star turret with driven tools 10" hollow chuck, Ø 254 mm Hollow chuck cylinder BB210A821 Double foot switch with protective cover NC tailstock with MK-5 mount Oil-air cooler for circulating spindle coolant Hinged belt chip conveyor High-pressure coolant system, 5 bar Oil mist separator AFS 1100 including interface Manual, swiveling tool pre-setter Gjdozy Hx Dopfx An Ijug SCHNEIDER transformer 45 kVA Technology cycle "Alternating Speed" Further technical data can be found in the document attached!

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 15,794 h, machine/vehicle number: A3231E0676, controller manufacturer: Siemens, controller model: Sinumerik 840D SL, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 12001, laser hours: 5,111 h, laser power: 12,000 W, laser wavelength: 1,030 nm, sheet thickness steel (max.): 50 mm, sheet thickness stainless steel (max.): 50 mm, sheet thickness aluminum (max.): 40 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 16 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, positioning speed: 280 m/min, workpiece weight (max.): 1,800 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, TRUMPF TruLaser 5030 fiber (L76), 12 kW (2024) Gsdpfx Anozz Shye Ioug High-spec 2D fiber laser cutting machine, one owner from new, installed September 2024. 3000 x 1500 mm working area, Siemens Sinumerik 840D SL control. In daily production and under TRUMPF service contract from new. Key data Machine No.: A3231E0676 Year of manufacture: 09/2024 Laser source: TruDisk 12001 with smart beam control Laser power: 12,000 W Working area: 3000 x 1500 mm Max. sheet thickness (thick-sheet package fitted): mild steel 50 mm / stainless 50 mm / aluminium 40 mm / copper 16 mm / brass 12.7 mm Max. simultaneous speed: 280 m/min Machine weight (rating plate): 7,650 kg Supply: 400 V 3~ / 50 Hz, 74.0 kVA, 3 x 125 A Hours: 15,794 h operating / 5,111 h laser-on Gas mixing Onboard gas mixer fitted - hardware mixing system for two gases, with additional cutting gas connection and gas mix cutting data (N2/O2). No external mixer unit needed. Machine Box frame. Gantry drive with linear direct drives. Longitudinal conveyor belt. Transverse conveyor belt with tipping container (left). Process cooler for machine and laser (water/air). Work area illumination. Pilot laser. Spraying equipment. Automatic nozzle changer, cleaning and centring. Closed beam guidance via laser light cable (LLK). Machine status light. Integrated electrical cabinets. Transport and installation device supplied. Cutting unit Single cutting-head strategy. Protective glass with online condition checking. Dynamic Focus Control. Universal cutting unit with fully adaptive lens system. Control and software SINUMERIK control, 21.5" wide-screen multi-touch display. Integrated technology data. Production plan. Multi-sheet processing. Condition Guide. Cutting Guide. Quick post-production. Auto-shutdown. Programmable cutting gas / pressure selection. Microweld. Online Update Manager. Remote support interface. Functions and cutting packages AdjustLine, BrightLine fiber, ControlLine, DetectLine, Drop&Cut, FastLine, FlyLine, FocusLine, NitroLine, PierceLine, PlasmaLine, Smart nozzle automation, Smart Rerun. Integrated camera for process viewing. Fusion cut performance package, Highspeed cutting package, Highspeed Eco cutting package, cutting package for thick sheets, copper cutting package, brass cutting package. Pallet changer / automation Automatic pallet changer in longitudinal direction, max. workpiece weight 1,800 kg per pallet (2,200 kg across both). LiftMaster Compact interface prepared; loading automation not fitted. Safety and extraction CE marking, EC Machinery Directive. Light barriers. Enclosed protective housing with certified door viewing panels left and right. Electrical rolling roof. Multi-chamber compact dust extractor. Data transfer USB, RJ45 network interface, Central Link, remote support, TRUMPF monitoring software connection. Installation Installed on a mezzanine; steel structure not included. Condition and availability One owner from new, in daily subcontract production in Braintree, Essex. Under TRUMPF inclusive service contract from new - two services a year, parts included - and still covered. Full service history available. Can be viewed cutting under load on any working day by appointment; cut tests welcome. Offered ex works, decommissioned by TRUMPF-certified engineers and loaded onto your transport. Export packing available. Enquiries Order confirmation, service history, hours report, cut samples and video on request.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0220A1818, laser power: 3,200 W, overall weight: 11,700 kg, TECHNICAL DETAILS Laser power: 3,200 W MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Input current: 125 A Control voltage: 24 V Required fuse rating: 3 × 125 A Compressed air connection: 7–10 bar Nitrogen connection (N₂): 30 bar Oxygen connection (O₂): 20 bar Connected power: 73 kVA Dimensions & Weight Dimensions (L x W x H): 9,229 x 6,145 x 2,200 mm Gujdpfx Anjz Ahrws Isg Total weight: 11,700 kg EQUIPMENT CE marking Documentation / Manual Dust extraction Emergency stop switch Safety light curtain

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 80 mm, turning diameter: 400 mm, center height: 220 mm, turning length: 1,500 mm, quill stroke: 230 mm, quill diameter: 90 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 25 rpm, swing diameter over cross slide: 240 mm, bed width: 400 mm, Equipment: rotational speed infinitely variable, Production Lathe MEXPOL TUS 400 – Available from Stock The MEXPOL TUS 400 is a high-performance production lathe ideal for precise and efficient machining tasks. With its robust construction, powerful main drive, and comprehensive standard equipment, this machine is perfectly suited for continuous industrial operation. Technical Specifications • Center height: 220 mm • Swing diameter over bed: 400 mm • Swing diameter over cross slide: 240 mm • Distance between centers: 1,500 mm • Bed width: 400 mm • Spindle bore: 80 mm • Spindle mount: DIN 55027 / 8 • Main drive: 11 kW with frequency inverter • Speed range: 25 – 2,000 rpm (3 gear stages) • Maximum spindle torque: 1,200 Nm • Max. workpiece weight: o Between centers: 150 kg o In chuck with tailstock: 600 kg o With steady rest: up to 1,300 kg • Accuracy according to DIN 8606 • Electrical equipment: 400 V / 50 Hz • Noise level: max. 84 dB(A) Feeds and Thread Cutting • Longitudinal feed: 0.04 – 12 mm/rev Gsdpfxoyhzgqs An Isug • Cross feed: 0.02 – 6 mm/rev • Rapid traverse longitudinal / cross: 3,800 / 1,900 mm/min • Metric, imperial, module, and DP threads without change gears Slides • Cross slide travel: 315 mm • Top slide travel: 130 mm Tailstock • Quill diameter: 90 mm • Quill taper: Morse taper MT 5 • Quill stroke: 230 mm Weight • Machine weight: approx. 2,500 kg Standard Equipment (excerpt) • Frequency-controlled main drive • Multifix quick-change tool post, size C • Central lubrication for carriage, headstock, and feed gearbox • Coolant system • Safety chuck guard with interlock • Travelling chip guard and rear chip wall • CE marking and declaration of conformity • Machine color: RAL 7035 / RAL 7011 Options • FAGOR INNOVA 30iT digital readout

Condition: used, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S – 25 mm stroke with Heidenhain measurement system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50 / 60 Hz Connected load: 22 KVA Welding current types: AC / DC Output current: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (independent removable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Error monitoring and process control - Monitoring of current, voltage, power, energy - Test pulse for part recognition - Program memory for 99 programs Inverter dimensions (W x H x D): 216 x 420 x 560 mm Inverter weight: approx. 21 kg Guedpepy Uzyjfx An Iog Spot welding head MIYACHI PECO F160S Rated current: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force ignition from 1.2 to 550 N - Heidenhain distance measuring system Welding unit with 5 pneumatic cylinders and Festo valve terminal Type CPX Welding head mounted on horizontal guide rail and can be moved 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 units with 46 mm stroke, 1 unit with 20 mm stroke). Throat depth (distance from welding tip to frame): 300 mm Welding tip height above floor: 315 mm Welding unit dimensions (W x H x D): 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 nearly identical units available, price per complete unit.

Condition: used, TECHNICAL DETAILS - Cutting strength : 1700 [daN] - Max. slide travel : 75 [mm] - Max. approach speed : 315 [mm/s] - Slide stopping time : 50 [ms] LOWER EXTRACTOR - Diameter : 16 [mm] SUPPLY Gjdpfx Anouhai Ds Ioug - Supply voltage : 3x400 [VAC] - Frequency : 50 [Hz] - Rated current : 5.5 [A] - Installed power : 2 [kW] FLOOR SPACE - Floor dimensions : 1300 x 1100 [mm] - Machine height : 1900 [mm] - Machine weight : 575 [kg] MACHINE HOURS - Working hours : 669 [h]

Year of construction: 2012, condition: excellent (used), functionality: fully functional, 1 x Marden Edwards Limited semi-automatic shrink wrapper and heat tunnel. Supplied with new belt. Manufacturer: Marden Edwards Limited Shrink wrapper: Model - ES 60. Serial number - W3710. Heat tunnel: Model - M25-40T. Serial number - W3708. Date of manufacture - 2012. Tunnel aperture dimensions - 515mm wide x 410mm high. Guodpszwxv Nofx An Isg Film roller - 595mm long. Sealing bar - 640mm long. Cutting knife - 620mm long. Height between sealing bar and rollers at maximum height - 345mm high. Electrical requirements - 230 V / 50 hz / 1 phase.

Condition: used, mileage: 945,600 km, power: 315 kW (428.28 HP), first registration: 12/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 04/2026, brakes: retarder, gearing type: automatic, emission class: euro6, total length: 9,650 mm, total width: 2,600 mm, total height: 3,730 mm, loading space length: 7,357 mm, loading space width: 2,497 mm, loading space height: 2,180 mm, Year of construction: 2013, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, VOLVO FM 420 - FRIGOBLOCK - FULL AIR SUSPENSION - 2.5T PALFINGER - VEHICLE HISTORY GERMAN VEHICLE VIDEO AVAILABLE UPON REQUEST ----Volvo FM 62 TR Refrigerated Box Trailer - Features & Technical Data Vehicle Data Manufacturer: Volvo * Type / Model: FM 62 TR * Vehicle Class: N3 * First Registration: 17.12.2013 * Year of Manufacture: 2013 * Mileage: approx. 945,600 km * Fuel: Diesel * Emission Standard: Euro VI * Emission Regulation: EU 595/2009?64/2012B * Power: 315 kW / approx. 428 hp at 1,800 rpm * Engine Displacement: 12,777 cm³ * Top Speed: 90 km/h * Automatic Transmission * AdBlue * 3-Axle * 1 driven axle * 2 seats * HSN: 9101 * TSN: Weights Technically Permissible Gross Vehicle Weight: 26,100 kg * Permissible Gross Vehicle Weight: 26,000 kg * Weight in Running Order: 12,980 kg * Technically Permissible Gross Combination Weight: 44,000 kg * Permissible Gross Combination Weight: 40,000 kg * Up to 44,000 kg Gross Combination Weight in combined transport according to registration * Permissible Trailer Load (braked): 26,900 kg according to registration with continuous braking system * Additional registered trailer load: 14,100 kg with SDAH/ZANH * Trailer load field O.1: 3,500 kg * Trailer load unbraked field O.2: 750 kg * Permissible Vertical Load: 1,000 kg Vehicle Dimensions Overall Length: 9,650 mm * Overall Width: 2,600 mm * Overall Height: 3,730 mm Axle 1 - Front Axle Air Suspension * Single tires * Tire size: 315/80 R22.5 * Load/Speed Index according to documents: 152 / G * Technically Permissible Axle Load: 7,100 kg * Permissible Axle Load: 7,100 kg Axle 2 - Drive Axle Air Suspension * Twin tires * Tire size: 315/80 R22.5 * Load/Speed Index according to documents: /145 G * Technically Permissible Axle Load: 11,500 kg * Permissible Axle Load: 11,500 kg Axle 3 - Lift Axle Lift Axle * Air Suspension * Single tires * Tire size: 315/80 R22.5 * Load/Speed Index according to documents: 154 / G * Technically Permissible Axle Load: 7,500 kg * Permissible Axle Load: 7,500 kg Brakes / Driving Assistance Retarder * Differential Lock * TCS / Traction Control * Hill Start Assist Trailer Coupling Fixed Trailer Coupling * Towing device registered in the vehicle documents * Trailer coupling test mark: E1 00-0350 * Technically Permissible Gross Combination Weight up to 44,000 kg according to registration Gujdpfozv Hbqjx An Ieg Refrigerated Box Body Insulated Refrigerated Box * Body Manufacturer: ROHR Commercial Vehicles * Year of Body Construction: 2013 * Box Type according to Nameplate: RA-B * Body No.: 305 298-4 * Order No.: 154 D1 805 * Paint Finish: RAL 9010 * Vehicle registered in the documents as a truck with a closed box / loading area as well as an insulated refrigerated body * Goods transport vehicle over 12 t * Storage compartments Internal Dimensions of Refrigerated Box Internal Length: approx. 7,357 m * Internal Width: approx. 2,497 m * Internal Height: approx. 2,18 m FRIGOBLOCK Refrigeration Unit Manufacturer: FRIGOBLOCK Grosskopf GmbH * Type: FK 13 * Year of Manufacture: 2013 * Device No.: 1044.215 * Refrigerant: R410A * Refrigerant Charge: 4.3 kg * Volume Flow: 23.6 m³/h * Max. Pressure: 42 bar * M.O.P.: 4.8 bar at -15 °C * Operating Voltage: 400 V * Power Consumption: 17.5 A * Frequency: 50 Hz * Control Voltage: 24 V * V-Belt 1: XPA 1430 * FRIGOBLOCK FK13 also registered in the vehicle documents * Refrigeration unit registered as part of the insulated refrigerated body Tail Lift Manufacturer: PALFINGER / MBB Palfinger * Type: 2500K * Lifting C

Condition: used, Used Alfa Laval model PX60VGD-140G stainless steel separator centrifuge. Bowl speed max. 6240 rpm. Equipped with 18.5 kW/50 Hz/1500 rpm motor. Some tools available. New in 2003. Gujdozvyi Iopfx An Ieg

Condition: used, Single-column – Eccentric press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture 1962 Pressing force 63 tons Stroke 260 mm Table area 630 x 530 mm Table opening Ø 210 mm Slide area 315 x 260 mm Adjustable slide stroke 8-100 mm Slide adjustment 63 mm Tool holder bore Ø 40 mm, with clamping piece Installation height max 450 mm Stroke rate 115 strokes / min Compressed air requirement min. 4.5 bar Motor power 4 kW Gujdjk S Htxjpfx An Ieg Power connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electrical stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination by WEINGARTEN friction-thread clutch with top dead center through-drive protection - Front crankshaft support bearing - Press table adjustable in height via 2 threaded spindles - Manual centralized lubrication - Control cabinet positioned beside the press - UVV (German trade association for accident prevention) for manual feeding operations Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons Good condition

Condition: used, Used Spiroflow AMC 3 with a tube size (OD) of 75mm, conveyor length 3,400mm. Stainless steel contact parts in 304. Unit is driven by a 1.5kw Sew-Eurodrive motor operating at 400v, 50 Hz, output speed 251rpm. Unit includes HMI controls. Unit includes a 200mm butterfly valve with air purge. Gjdoy Aaxfopfx An Ioug

Condition: used, mileage: 945,600 km, power: 315 kW (428.28 HP), first registration: 12/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 04/2026, brakes: retarder, gearing type: automatic, emission class: euro6, total length: 9,650 mm, total width: 2,600 mm, total height: 3,730 mm, loading space length: 7,357 mm, loading space width: 2,497 mm, loading space height: 2,180 mm, Year of construction: 2013, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, VOLVO FM 420 – FRIGOBLOCK – FULL AIR SUSPENSION – PALFINGER LBW 2.5 T + RZK THROUGH-LOADING ----VEHICLE HISTORY * GERMAN VEHICLE * VIDEO AVAILABLE UPON REQUEST VOLVO FM 420 REFRIGERATED TRUCK Vehicle Data* Manufacturer: Volvo * Type / Model: FM 62 TR * Vehicle Class: N3 * Registration Date: 17.12.2013 / Year of Manufacture 2013 * Mileage: approx. 945,600 km * Diesel / Euro VI / AdBlue * Power: 315 kW / approx. 428 hp * Engine Capacity: 12,777 cm³ * Automatic Transmission * Maximum Speed: 90 km/h * 3 Axles / 1 Driven Axle * 2 Seats * Permissible Total Weight: 26,000 kg * Technically Permissible Total Weight: 26,100 kg * Unladen Weight / Ready to Drive: 12,980 kg * Permissible Total Train Weight: 40,000 kg * Up to 44,000 kg in combined transport according to registration * Permissible Vertical Load: 1,000 kg * External Dimensions L/W/H: approx. 9,650 / 2,600 / 3,730 mm Chassis / Axles* Full Air Suspension * Front Axle: 7,100 kg * Drive Axle: 11,500 kg * Lift Axle: 7,500 kg * Tires all around: 315/80 R22.5 * Rear Axle with Twin Tires * Lift Axle with Single Tires * Retarder * Differential Lock * TCS / Traction Control * Hill Start Assist * Fixed Trailer Coupling Refrigerated Box Body* Manufacturer: ROHR Commercial Vehicles * Year of Body: 2013 * Insulated Refrigerated Box * Box Type: RA-B * Body No.: 305 298-4 * Order No.: 154 D1 805 * Paint: RAL 9010 * Storage Boxes * Internal Dimensions L/W/H approx.: 7,357 / 2,497 / 2,180 mm FRIGOBLOCK Cooling Unit* Type: FK 13 * Year of Manufacture: 2013 * Unit No.: 1044.215 * Refrigerant: R410A / 4.3 kg * Volume Flow: 23.6 m³/h * Max. Pressure: 42 bar * Operating Voltage: 400 V * Frequency: 50 Hz * Control Voltage: 24 V * Cooling unit registered in vehicle documents Tail Lift* PALFINGER / MBB Palfinger * Type: 2500K * Load Capacity: 2,500 kg * Year of Manufacture: 2013 * Serial No.: 83463693 * Registered in vehicle documents Gusdpfxjzv Hb Re An Ijg Cab / Comfort* Automatic Climate Control * Auxiliary Heater * Seat Heating * Multifunctional Steering Wheel * Leather Steering Wheel * Electric Windows * Heated Exterior Mirrors * Reversing Camera * Manual Sunroof ----RZK THROUGH-LOADING REFRIGERATED TRAILER Vehicle Data* Manufacturer: ROHR Commercial Vehicles * Type: RZK/18 IV * Vehicle Type: 2-Axle Through-Loading Refrigerated Trailer * Registration Date: 10.02.2014 / Year of Manufacture 2014 * Order No.: 361 D1 808 * Body No.: 305 821 * Box Type: RA-B * Permissible Total Weight: 18,000 kg * Axle Load: 2 x 9,000 kg * Vertical Load: 1,000 kg * External Dimensions L/W/H approx.: 9,330 / 2,600 / 3,780 mm * Internal Dimensions L/W/H approx.: 7,275 / 2,493 / 2,280 mm Body* Insulated Refrigerated Box Body * Through-Loading Design * Pneumatically / Air-Operated Opening Front Wall * Swing Door Front * Swing Door Type DLE 31-A, Year of Manufacture 2014 * Aluminum Floor * Code-XL Body / Load Securing * Storage Box * Underrun Protection * Reversing Camera Cooling Unit* Frigoblock EK 13 U * Year of Manufacture: 2013 * Refrigerant: R410A / 6.5 kg * Max. Pressure: 42 bar * 400 V / 50 Hz * Control Voltage: 24 V Chassis / Brakes* 2 Axles * Air Suspension * Disc Brakes * Tires: 385/65 R22.5 160J Tail Lift* MBB Palfinger GmbH * Model: 2500K * Load Capacity: 2,500 kg * Year of Manufacture: 2013 * Serial No.: 83464752 Coupling* WAP Drawbar * Type: WLZD210TK / Version A1K * D-Value: 140 kN * Vertical Load: 1,000 kg * V-Value: 56 kN * Ident No.: 2711612-2 Drawbar Coupling* Ringfeder / VBG Group * Type: D40-S / Type 440 * D-Value: 125

Condition: excellent (used), Year of construction: 2017, REF: MM6171 1 X Audion CS-Matic 100 shrink wrapper. The Audion CS-Matic 100 offers flexibility for diverse product sizes. Its continuous side-seal system  accommodates a wide range of heights and widths, alongside unlimited product lengths. Smart integrated sensors automatically determine the perfect bag size, while the adjustable, PTFE-coated seal bar ensures high-speed packaging, achieving up to 4200 pristine packs per hour. Technical specification: ⚙️ Manufacturer - Audion Packaging Machines ⚙️ Model - CS-Matic 100 ⚙️ Year of manufacture - 2017 ⚙️ Power - AC Input 380-415V | 50-60 Hz | 2330 W | 10A Benefits: ✅ Very fast cycle - Up to 4200 packs per hour. ✅ Flexibility - Possibility of packing single packs or multipacks at any length. ✅Easy operation with touchscreen control systemm - Sealtime, seal temperature and belt speed can easily be adjusted. ✅ Automated sealing - Continuous cycle sealing. Gjdpfx Answ Euzme Ioug ✅ Motorized systems - Sealing bar and conveyors are controlled by an inverter and encoder. ✅ Wide film choice - The CS Matic 100 can handle polyolefin, polyethylene and pvc centrefolded film. ✅ User-friendly touchscreen - Easy navigation through the menu structure and safe control of all packaging parameters. ✅ Built-in safety features - An emergency stop button is standard equipped.

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 2,500 rpm, travel distance X-axis: 340 mm, travel distance Z-axis: 1,100 mm, overall weight: 3,800 kg, number of axes: 2, Horizontal turning machine manufactured in 2007. This Weiler E55X1000 features maximum turning diameter of 315 mm and a a center distance of 1100 / 2100 mm. It is equipped with a Sauter 8-fold tool system and a spindle speed range of 1 – 2500 rpm. If you are looking to get high-quality turning capabilities, consider the Weiler E55X1000 machine we have for sale. Contact us for further details regarding this machine. • Internal taper: Metric 90 • Spindle diameter in front bearing: 120 mm • Spindle bore: 83 mm • Flange diameter: 500 mm • Maximum turning diameter: 315 mm • Maximum torque: 1600 Nm • Tool system: Sauter 8-fold • Number of tool positions: 8 • Tool shank size: 32 x 25 mm • Turret interface: Capto C4 • Number of face slides: 1 • Center distance: 1100 / 2100 mm • Turning length: 340 mm • Tailstock taper: MK 5 Gjdpfx Ansy Em A Aj Ieug • Tailstock quill diameter: 80 mm • Tailstock quill stroke: 200 mm • Maximum tailstock travel: 1000 / 2000 mm • Continuous duty speeds (S1):Gear stage I: 89 rpmGear stage II: 355 rpm • Emission level: 80 dB(A) • Operating voltage: 400 V • Control voltage: DC 24 V • Connected load: 30 kVA • Nominal current: 43 A • Frequency: 50 Hz • Main fuses: 50 A • Condition note: Ball screw in Z axis makes noise, but dimensional accuracy is not affected Additional equipment • Extraction system Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, total length: 495 mm, total height: 780 mm, total width: 585 mm, overall weight: 17 kg, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading are to be arranged by the buyer! The unit will be available from October 2026! TECHNICAL DETAILS Build volume X-axis: 230 mm Build volume Y-axis: 190 mm Build volume Z-axis: 200 mm Layer height: 0.06–0.4 mm Build plate: Heated glass plate Build plate temperature: up to 120 °C Filament diameter: 2.85 mm Nozzle temperature: up to 280 °C Print speed: up to 150 mm/s Material flow: up to 24 mm³/s Compatible Print Cores: AA 0.4; BB 0.4; AA 0.25; AA 0.8; BB 0.8; CC 0.4; CC 0.6; DD 0.4 MACHINE DETAILS Technology: Fused Deposition Modeling (FDM) Software Print preparation: UltiMaker Cura, Cura Cloud Printer management: UltiMaker Digital Factory Supported operating systems: Windows, macOS, Linux Environmental conditions Operating temperature: 15–32 °C Operating humidity: 10–90 % RH, non-condensing Storage temperature: 0–32 °C Non-operating humidity: 10–90 % RH, non-condensing Placement: Away from direct sunlight Power supply: 100–240 V AC Mains frequency: 50–60 Hz Power consumption: 350 W Operating noise: < 50 dB(A) Connectivity: WLAN 2.4 GHz, LAN, USB Monitoring: HD camera Dimensions & Weight Dimensions: 495 × 585 × 780 mm Net weight: 14.4 kg Weight in operation: approx. 17 kg Gusdpezx S Dvsfx An Isg EQUIPMENT Dual-extrusion print head Automatic nozzle lifting system Interchangeable Print Cores Dual-gear feeder Filament flow sensors Dual spool holder with NFC detection Color touchscreen HD camera Heated glass plate PEI print bed Spool holder with material guide Power cable Ethernet cable USB stick User manual CE marking Print Core AA 0.4 – 2 pieces Print Core BB 0.4 – 1 piece Nozzle cover – 3 pieces

Condition: used, Year of construction: 2007, For sale: Bystronic Beyeler P225/410 hydraulic press brake, manufactured in 2007 in Germany. This high-quality CNC press brake offers a 225-ton pressing force and a 4,100 mm bending length, making it ideal for precision sheet metal fabrication in steel, stainless steel, and aluminum. The machine is renowned for its robust construction, reliability, and accuracy, making it suitable for both small batch production and high-volume manufacturing environments. Technical Specifications General Information - Manufacturer: Bystronic Beyeler - Model: P225/410 - Year of Manufacture: 2007 - Country of Origin: Germany - CE Marked: Yes Capacity - Press Force: 225 tons (2,250 kN) - Maximum Bending Length: 4,100 mm - Stroke: 400 mm - Throat Depth: 250 mm - Daylight Opening / Installation Height: 917 mm Speed - Fast Approach Speed: 150 mm/s - Working Speed: 1 - 10 mm/s - Return Speed: 150 mm/s Dimensions & Weight Guodpszwg Imsfx An Ijg - Overall Length: 5,475 mm - Overall Width: 2,257 mm - Overall Height: 3,310 mm - Machine Weight: 20,500 kg Electrical Specifications - Main Motor Power: 30 kW - Connected Load: 40 kW - Power Supply: 380 V, 3 Phase - Frequency: 50 Hz - Control Voltage: 24 V DC Hydraulic System - Maximum Hydraulic Pressure: 315 bar - Hydraulic Oil Capacity: 600 liters - Maximum Oil Temperature: 65°C Pneumatic System - Minimum Air Pressure: 6 bar - Operating Air Pressure: 6 bar Tooling - Maximum Upper Tool Weight: 400 kg - Maximum Workpiece/Tool Weight: 13 kg Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! * Manufacturer: Bystronic Beyeler * Model: P225/410 * Year of Manufacture: 2007 * Press Force: 225 tons (2,250 kN) * Maximum Bending Length: 4,100 mm * Working Speed: 1 - 10 mm/s * Machine Weight: 20,500 kg * Stroke: 400 mm * Throat Depth: 250 mm Working hours: 16159

Condition: used, Used GEA Westfalia CSA 160-47-076 separator centrifuge. Working speed of bowl up to 6800 rpm. Maximum temperature up to 100°C. Machine is driven by Atex rated electric motor 30 kW, 50 HZ. Also includes tools. Gedpfx Aszvychon Isug

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, 1 used CNC turning machine DMG Gildemeister NEF 600 - Year of manufacture: 2010 Operating hours: approx. 40,600 h - Spindle hours: approx. 17,900 h Refurbished by DMG Mori in 2025: Electronic control unit Control system: Siemens Sinumerik 840D (ERGOline) Max. turning diameter: 600 mm Swinging diameter over slide: 490 mm Turning length: 1,190 mm | Distance between centers: 1,335 mm Bar capacity: 75 mm | Spindle bore: 90 mm Travel X / Z: 398 / 1,250 mm Spindle nose A8 DIN 55026 | Chuck 250 / 315 mm Max. speed: 3,000 rpm Power (100 % / 40 % duty cycle): 27.5 / 39.4 kW Torque S1 / S6: 600 / 845 Nm Tool turret, 12 stations, VDI mounting (static and driven) Tailstock, hydraulic, travel 1,150 mm, max. 1,250 daN, MK 5 Connection: 400 V / 50 Hz / 42 kVA Includes: Chip conveyor Hydraulic 3-jaw power chuck SCHUNK Extensive tool package: numerous VDI holders, static and driven (including boring bar holders, drilling and collet chuck holders), mostly brand Holex, without cabinet Technical documentation (German) Footprint: L x W x H: 3,697 x 2,687 x 1,936 mm | Total weight approx. 7,000 kg Gujdpfx Anjzfafzs Iog Technical data subject to change, prior sale reserved. Used machines and accessories are always sold without warranty!

Condition: new, functionality: fully functional, machine/vehicle number: 1.286-960.0, operating pressure: 250 bar, high-pressure hose length: 10,000 mm, empty load weight: 70 kg, input voltage: 400 V, warranty duration: 24 months, The HD 10/25-4 S Plus cold water high-pressure cleaner is ideal for ergonomic and user-friendly operation. With the Kärcher EASY!Force Advanced trigger gun, it can be operated comfortably without holding the gun. Pressure and water flow can be adjusted using the Servo Control regulator between the lance and trigger gun. The pressure reduction allows for quick response to sensitive surfaces – without changing the nozzle. In addition, the Vibrasoft rotor nozzle significantly reduces vibrations on the spray lance. Assistance systems and an LED status display simplify operation. Technical Specifications: Condition: NEW Catalog Number: 1.286-960.0 Current Type (Ph/V/Hz): 3 / 400 / 50 Flow Rate (l/h): 500-1000 Working Pressure (bar): 80 - 250 Gujdpfxjxpf Hxo An Iog Maximum Pressure (bar): 280 Inlet Temperature: max. 60°C Power Rating (kW): 8.8 Connection Cable (m): 5 Weight (with accessories) (kg): 70.3 Dimensions (L × W × H) (mm): 607 x 518 x 1063 Included: Handgun: EASY!Force Advanced + Softgrip Insert Hose: 10m DN8, 315 bar - Premium Quality Spray Lance: 1050 mm Power Nozzle Dirt Blaster Servo Control Features: 4-pole three-phase motor with air and water cooling 3-piston axial pump: with stainless steel pistons Pressure shut-off Integrated fine water filter Oil level sight glass Brass water inlet Design: - Compact upright design concept thanks to vertically mounted motor and pump unit - Small footprint and space-saving external dimensions. Easy to maneuver and transport. Maximum stability ensures the device remains stable. - Slow-running 4-pole motor with water and air cooling, robust pump with stainless steel pistons and brass cylinder head - Long service life with low maintenance costs. High performance with high efficiency. With suction function and water temperature up to 60°C. Advantages: - Ergonomic Vibrasoft dirt blaster, reduces vibrations by up to 30%. Reduces noise and sound levels. Enables effortless and extended work with the rotary nozzle. - Assistance systems and LED status display - Pressure and water flow are adjustable using the servo control regulator between the lance and gun.- EASY!Force Advanced for fatigue-free work without holding forces.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Technical Specifications: Manufacturer: Thompson Meat Machinery. Model: 4200 M/M single-shaft mixer grinder. Serial Number: TMG.4200.259. Guedpszuzl Ujfx An Iog Date of manufacture: 2002. Output capacity - up to 4,000 kg/h (depending on product). Hopper capacity - 390 litres. Mix capacity - up to 200 kg. Head size - #56. Supplied with various hole plates and other spare parts. Motors: Voltage (V): 415 V (for all motors). Frequency (Hz): 50 Hz (for all motors). Total Ampage: 35.8 A.