Used Elaflex Axial Compensator Dn125 for sale (1,507)

Condition: excellent (used), Weiss Type: WK3-2200/40/5/V Weiss Climate Test Chamber, Water-Cooled Specifications for Temperature Testing: Bjdpfx Aijziixrshewp Temperature range: -40°C to +180°C Temperature change rates: Heating: 6.0 K/min Cooling: 11.5 K/min Temperature deviation: Temporal ± 0.8 K Spatial ± 2.0 K Heat compensation max. 8000 W Specifications for Climatic Testing: Temperature range: +10°C to +95°C Dew point temperature range: +4°C to +94°C with closed floor element Humidity range: 10 to 95% rH Temperature deviation (temporal): ± 0.3 K Humidity deviation (temporal): ± 3% rH Temperature uniformity: Spatial ± 1.0 K Heat compensation max.: 500 W Test chamber volume: 2,160 liters Test chamber dimensions: Height 1,115 mm, Width 1,400 mm, Depth 1,400 mm External dimensions (lowered): Height 2,318 mm, Width 1,860 mm, Depth 3,658 mm External dimensions above shaker: Height 2,710 mm External dimensions max. stroke height: 3,038 mm Exchangeable floor dimensions: Width 1,600 mm, Depth 1,504 mm Operating Data: Rated voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 38.0 kW Rated current: 63.0 A Customer-side fuse: 80 A slow-blow Refrigerant: R 404A Weight: approx. 2,100 kg Important information for your safety as a buyer: The following points will be carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with refrigerant compliant with legal regulations 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) We are happy to answer any further questions you may have by phone.

Condition: excellent (used), Heraeus Vötsch Type: VT 7021 Air-cooled temperature test chamber 1 port, nominal width 80 mm, Test chamber volume: 210 liters Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.2 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (heating): 2.5 K/min Temperature change rate (cooling): 2.5 K/min Max. heat compensation: 800 W Test chamber dimensions: Width 560 mm, Depth 570 mm, Height 630 mm External dimensions: Width 850 mm, Depth 1250 mm, Height 1640 mm Electrical connection: 1/NPE AC 230 V ± 10% 50 Hz Rated power approx. 1.8 kW, rated current 12 A Refrigerant: R404A and R23 Weight: 355 kg Bwedpfx Aoziiw Isihop For your safety as a buyer, please note the following information! The following procedures are performed on the chambers we offer, in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors in the details!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Weiss Type: WK3-340/70 Weiss Climate Test Chamber, Air-Cooled Control Panel: "Touch Panel" Bwodpoziiwujfx Aihep All control and operating commands can be initiated on the "Touch Panel" control panel by simply touching the function symbols. Adjustable Feet To compensate for uneven floors and to ensure adequate ventilation of the machine, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be routed into the test chamber. Feedthroughs installed as standard: R1: 125 mm diameter L1: 85 mm diameter Volume: 335 liters Test chamber dimensions: Height: 750 mm, Width: 580 mm, Depth: 765 mm External dimensions: Height: 1775 mm, Width: 870 mm, Depth: 1600 mm Data for temperature tests: Minimum temperature: -72°C Maximum temperature: +180°C Temperature deviation, over time: ± 0.1 to ± 0.5 K Temperature homogeneity, spatially: ± 0.5 to ± 1.5 K Temperature change rate, cooling: 3 K/min Temperature change rate, heating: 3 K/min Data for climate tests: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% RH Temperature deviation, over time: ± 0.1 to ± 0.3 K Temperature homogeneity, spatially: ± 0.5 to ± 1 K Humidity deviation, over time: ± 1 to ± 3% RH Data for operation: Test chamber lighting: Halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 16 A, Rated power: 4.9 kW Fuse: 16 A slow-blow (to be provided by the customer) Refrigerant: R-452A/R23 Weight: Approx. 585 kg For your security as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: good (used), TRANE CVGAM100SDAABB0 Air-Cooled Liquid Chiller Manufacturer: TRANE Type: CVGAM100SDAABB0 Product Reference: VGA120SDAA Machine Type: Air-Cooled Liquid Chiller Cooling Capacity: approx. 25.2 kW For sale is a used air-cooled liquid chiller from the manufacturer TRANE. This unit is suitable for cooling process water, machines, production facilities, machine tools, as well as for industrial air conditioning and refrigeration applications. Technical Data Cooling Capacity: approx. 25.2 kW Refrigerant: R407C Refrigerant Charge: 7.5 kg Dimensions: approx. 1,070 × 1,100 × 1,800 mm (L × W × H) Weight: approx. 434 kg Low Pressure (LP): 21 bar High Pressure (HP): 30 bar Electrical Data Fan: 1 × Axial Fan Fan Power: 1.00 kW Fan Current: 3.1 A Compressor: 1 × Scroll Compressor Compressor Power: 11.7 kW Max. Compressor Current Draw: 30.0 A Mains Connection: 400 V / 3 Ph / 50 Hz Control Voltage: 24 V / 50 Hz Equipment Air-Cooled Condenser Hydraulic Module Integrated Scroll Compressor SWEP Plate Heat Exchanger Water Pump Expansion Tank Carel uC2 Controller Axial Fan Pressure Gauge Main Switch Water Connections Accessories as Shown in Pictures Bsdpfxezib A Nj Aihowp Application Areas Process Cooling Machine Cooling Machine Tools Industrial Plants Production Facilities Chilled Water Supply Air Conditioning Industrial Refrigeration Condition Used Unit was in operation. Visual condition as shown in pictures. Scope of Supply TRANE CVGAM100SDAABB0 Air-Cooled Liquid Chiller Integrated Hydraulic Module Accessories as Shown in Pictures Scope of supply as pictured. Subject to changes, errors and prior sale.

Condition: excellent (used), EA Elektro Automatik Model: EA-PS 8080-170 3U EA Elektro-Automatik EA-PS 8080-170 3U 19" Rack – Laboratory Power Supply 0-80V / 0-170A, 5000W For sale is a high-quality programmable laboratory DC power supply from the renowned manufacturer EA Elektro-Automatik GmbH & Co. KG. This is the EA-PS 8080-170 3U model with an output power of up to 5000 W. Key features: - Autoranging (flexible combination of V/A up to maximum power) - Remote sense (up to 2.5 V compensation) - Low ripple: < 10 mV RMS / < 100 mV pp Bedpfezibh Eex Aihewp - Multiple interfaces for external control: USB, RS-232, CAN, LAN (Ethernet), GPIB (IEEE488), Profibus - Analog control (0–5 V / 0–10 V) - Fan-cooled, robust industrial design Technical data: - Output voltage: 0 … 80 V DC - Output current: 0 … 170 A - Maximum power: 5 kW - Construction: 19" rackmount, 3U - Efficiency: approx. 93% - Weight: approx. 20 kg Scope of delivery (see photo): - EA-PS 8080-170 3U power supply - Power cable (Specifications and technical details subject to change and errors!) For further questions, feel free to contact us by phone.

Condition: excellent (used), EDAG EDAG Huf Endurance Test Stand Intended use: This test stand is intended exclusively for testing components that are capable of rotational and/or translational movement within the scope of an endurance test and within the limits of the following technical specifications. Technical data: Dimensions: Width 1565 mm x Depth 615 mm x Height 1655 mm Weight approx. 450 kg Operating voltage 400V / 50Hz Control voltage 5, 24 Preliminary fuse 16 A Testing device: Maximum stroke 194 mm Maximum axial force 500 N Maximum torque 5 Nm Breakaway force (manually operated slider) 15 N Displacement force (manually operated slider) 10 N Other equipment: P4, 24" TFT monitor (1900 x 1080) Operating system: Windows XP Measurement and control software: LabVIEW 2011 PC plug-in cards: 1 card, NI PCI-6251, 1 card, N1 PCI-7044 Drawer: 500 mm (full extension with automatic closing) Additional load: 500 N Drawer cabinet, lockable: 3 drawers The teach-in endurance test stand is a device for carrying out endurance tests on test objects that can rotate and/or move translationally, e.g., cylinder locks, door handles, key functions. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone. Bsdszh U Rdspfx Aihewp

Condition: excellent (used), Vötsch Type: VC 7018 Vötsch Climatic Test Chamber VC 7018 Water-Cooled Touch Panel Control Unit On the touch panel control unit, all control and operating commands can be triggered by simply touching the function symbols. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Ports The test chamber is equipped with port holes on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Feedthrough included in standard equipment R1: NW 125 mm L1: NW 50 mm Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Characteristics for temperature tests: Temperature range: -70°C to +180°C Temperature ±0.1 to ±0.5 K Spatial ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Characteristics for climatic tests: Temperature range: -10°C to +95°C Humidity range: 10% to 98% r.h. F. Temperature deviation over time in the center of the usable space ± 0.1 to ± 0.3 K Temperature deviation over space ± 0.5 to ± 1.0 K Temperature gradient 1 to 2 K Humidity deviation over time in the center of the usable space ± 1 to ± 3 %RH Electrical connection: Nominal voltage: 3/N/PE AC 400V ±10 50Hz Nominal power: 5.9 kW Nominal current: 12.0 A Connection cable: 3.5 m Fuse protection: 16 A slow-blow, provided by the customer Refrigerants: R-404A and R-23 Test chamber capacity: approx. 190 liters Weight: approx. 460 kg net Bwedpfxozh Huhe Aihsp For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, This listing is for the Jenway 3520 bench‑mounted laboratory pH/mV/temperature meter The unit is in full working condition and is ready for immediate use The Jenway 3520 is a bench‑mounted laboratory pH/mV/temperature meter designed for precise measurement and recording of hydrogen ion concentration (pH), redox potential (mV), and solution temperature in scientific, QC (quality control) and GLP environments. Key Features Measurement Capabilities - Measures pH, mV (redox potential) and temperature simultaneously. - High resolution: up to three decimal places (0.001 pH) for detailed accuracy. - Wide pH range: typically –2.000 to +20.000 pH units. - Temperature range from approximately –10 °C to +105 °C. Calibration & Buffer Recognition - Supports 1, 2, or 3‑point pH calibration for flexible accuracy. Bwodsyk Evqopfx Aihop - Automatic or manual buffer selection, compatible with DIN, JIS and NIST standards. Data & Logging - Built‑in data logger can store up to 500 readings, with options for printing or exporting via interfaces. - GLP support includes calibration reminders, security‑protected user data, and multiple alarm options. Display & Interface - Backlit LCD display shows readings clearly. - Communication via analogue output, RS‑232 serial port and optional IrDA (infra‑red) printer interface. Additional Functions - Multi‑language menu options. - Alarm outputs (audible and open‑collector) for set thresholds. - Option to wall‑mount or bench‑top install. ----- Typical What’s Included Depending on the specific kit or version you buy, the meter often comes with: - Glass combination pH electrode - Automatic Temperature Compensation (ATC) probe - Buffer sachets (pH 4, 7, 10) - Electrode stand and holder - Power supply (230 VAC / UK or 120 VAC versions available) ----- Typical Applications The 3520 is suited to: - Routine pH analysis in research and industrial labs - Quality control and regulatory compliance testing - Monitoring & logging in process environments - Scenarios where traceable, high‑precision data is needed ----- If you want detailed user‑manual specifications (e.g., calibration procedure, wiring diagrams), I can help find or summarize that too!

Condition: used, Year of construction: 2015, Overview This compact isobaric filler was manufactured in 2015 by Italian company Rizzolio. The Rizzolio RLV 2 ISO is designed for small breweries and artisanal beverage producers requiring precise CO₂ pre-injection and controlled filling of carbonated beverages such as beer. The machine has two filling heads and offers a robust, easy-to-maintain design. It is being sold because the owner purchased a larger filler. Recently, both electrical and mechanical parts were repaired. Technical data - Capacity: Approx. 250 bph Bwjdpjxd Ez Eofx Aihop - Formats: Adjustable for different bottle sizes - Filling system: Isobaric with CO₂ pre-injection into filling bell - Valves: 2 - Max. working pressure: 5 bar - Operation: Two manual levers for bottle lift and filling cycle; automatic gas compensation after first cycle - Electrical supply: Single-phase, 220 V  

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. The machine was meticulously maintained by the previous owner. It was sold due to a factory closure Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Bwedpfx Aiozikhbehop Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Year of construction: 1995, condition: good (used), Balancer, machine balancer, spring balancer, cable extension, weight compensator, winder -Manufacturer: Fein, Balancer Spring Balancer Bsdozhuglopfx Aihowp -Load capacity: 10-14 kg -Order No.: 90801029002 -Quantity: 1x spring balance available -Dimensions: 310/190/135 mm -Weight: 4 kg

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: Bwjdsy R Nnfjpfx Aihsp The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: used, Vötsch Type: VCS 7034-5 Water-cooled climate test chamber Test chamber volume: 335 liters Performance for temperature tests: Temperature range: -70 to +180°C Time-related temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 Bwjdpfx Ajzg Tx Reihjp Rate of change: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration values: +23°C and +80°C Performance for climate tests: Temperature range: +10 to +95°C Time-related temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Time-related humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration values: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580mm, Depth 765mm, Height 750mm External dimensions: Width 870mm, Depth 1595mm, Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R-404A / R-23 For your security as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions by telephone.

Condition: good (used), Vötsch Type: VCS 7034-5 Water-cooled climatic test chamber Vötsch VCS 7034-5 Test chamber capacity 335 liters Performance for temperature tests Temperature range -70 to +180°C Temperature deviation temporal K ±0.1 to ±0.5 Spatial temperature deviation K ±0.5 to ±2.0 Temperature gradient 1 to 4 Rate of change : Cooling 6.7 K/min Heating 6.8 K/min Heat compensation at +20 °C 3000 W / at -20°C 3000 W Temperature calibration values +23 °C and +80 °C Performance for climate tests Bodpfjzg Twgox Aihswp Temperature range +10 to +95°C Temperature deviation in time ±0.1 to ±0.3 K Spatial temperature deviation ±0.5 to ±1.0 K Temperature gradient 1 to 2 K Humidity range 10 to 98% Humidity deviation in time ±1 to ±3% Dew point range -3 to +94°C Heat compensation 400W Climate calibration values +23 °C / 50 % r.h. and +95 °C / 50 % r.h. Test chamber dimensions: Width 580mm Depth 765mm Height 750mm External dimensions: Width 870mm Depth 1595mm Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10kW Rated current: 21 A Sound pressure level: 64dB(A) Cooling water consumption: 1.4m³/h Refrigerant: R-404A / R-23 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Year of construction: 2015, Perfect binding line Kolbus KM 600 - ZU 805 - FA 650 - HD 143.P - Kl 301 Year: 2015 Consisting of Gathering machine Kolbus ZU805 Year: 2015 Description: - Hand feeding station: 2 - Number of gathering stations: 24 - ATC thickness control - Optical sheet control - Air center: Becker - Set up element - Reject gate for incomplete products: AS 805 Perfect binder Kolbus KM 600 Year: 2015 Product counter: +/- 25,3 mio Description: - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 21 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit - Base for side glue system - Hotmelt side glue unit, interchangeable - Pile cover feeder - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus Year: 2015 Description: - Transport system, length (approx): 45 mtr - Escape delivery - Conveyor tower Front cutter Kolbus FA 650 Bedpfjzf Izqsx Aihewp Year: 2015 Description: - TFT Touch screen - Straight infeed - Throughfeed - Belt delivery Three knife trimmer Kolbus HD 143.P Year: 2015 Description: - Co-Pilot with touchscreen - Infeed conveyor from the right - Automatic hopper feeder for inline production - Product counter - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4 - 18 Book stacker Kolbus KL 301 Year: 2015 Description: - Semi automatic setting - Compensating stacker - Delivery to the left and right

Condition: used, Year of construction: 2021, Overview The filling line was manufactured in 2021 by the German company ALWID. The filling line is new and can fill  chemical products into plastic containers. With the exception of the bottle feeder and Posimat, glass bottles can also be processed. Due to ATEX certification, explosive products can be processed with the line.  Technical details Bwedpfx Ajmfqm Doihop - Capacity: 9000 containers/h (varies according to bottle volume and product).  - Container  - Max. Diameter: 100mm  - Max. Height: 300mm  - Control Siemens S7 Single machines  Bottle Hopper | ALWID | POSIMAT-ACCESS-N15  - Bottle feeder with hopper 2000 l, in stainless steel, chassis and supports in mild steel painted - Positronic control system for optimal adaptation to downstream filler - Machine, completely internally wired with attached control cabinet in mild steel, painted - Machine according to CE guidelines; i.e. max. noise level of ≤ 80 dB +/- 2 Combined filling and closing machine (block machine) | ALWID | SUPERIOR-16MDM-5SK - Fully automatic rotary filler - Filling system: mass flowmeter system, type: Endress+Hauser LPG MASS - Number of filling stations: 16 filling stations - Filling valve diameter: Ø12mm - Max. tank dimensions: height: 50-300 mm, Ø: 20-100 mm - Fully automatic round capper - Number of capping heads: 5 - With torque adjustment via slip clutches - With fully automatic cap sorting and cap feeding via BONINO disc sorter with elevator - With inside drop switch to switch off the machine in case of missing closures Checkweigher | ALWID | OCS-HC-M-2000-1 - Applied safety and machinery directives CE compliant - Industrial load cell with stainless steel housing based on the principle of electromagnetic force compensation - Force shunt free current transfer at the load cell - Front protection to reduce interference on the weighing result - Stainless steel control cabinet - Graphics-capable color TFT touch screen, 10.4 inch, VGA resolution - Flexible operability due to tiltable stainless steel operator terminal - Freely configurable user interface with simple, intuitive operation Inkjet Printer | Domino | Ax350i  - Fast printing of text and multi-line codes at high speeds  Labeler | ALWID | SES-120-III - Tandem design - Max. Label height: 120mm  - Photocell for label scanning - 2 x automatic winding station incl. counter pressure plate - Mounting device with height adjustment for lateral label dispensers - With adjustable side guides - passage width up to 150mm

Condition: used, Year of construction: 2009, Perfect binding line Müller Martini Corona C15 S/35 (18") Year: 2009 Consisting of Gathering machine Müller Martini 3681 Description: - Chain tensioning station - Number of gathering stations: 12 - ASIR Automatic Signature Image Recognition: III - ASAC automatic self adjusting calliper - Stream feeders: 3738 - 10x (yr 08 06 & 03) - Bundle clamp: Gramatec CL 200 (yr 23) - Bundle clamp: Gramatec CL 200 (yr 23) - Gantry system: Pfaff (yr 23) - Pump - Set up element: 3641 - Reject gate for incomplete products: 3714 - Intermediate element with vibrating: 3643 - 2x - Transfer into the binder Perfect binder Müller Martini Corona C15 S/35 (18") Year: 2009 Description: Bwjdpjxdx Tnsfx Aihsp - Semi automatic setting - Commander with touch screen - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - 1st hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: ICS C80 - Base for 2nd spine glue system - 2nd hotmelt spine glue unit, interchangeable - 2nd premelter for spine glue unit: ICS C160 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: CLS 30 - Stream cover feeder - Scoring station - Pump - Nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system - Escape delivery Three knife trimmer Müller Martini Zenith S (3672) Description: - Colour monitor with touchscreen - Semi automatic setting - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4 - 17 Book stacker Müller Martini CB 16 (3631) Description: - Compensating stacker - Delivery to the left and right

Year of construction: 2026, condition: new, working width 1000 mm workpiece width - max. 0,5 - 50 mm sandingbelt width -- mm weight of the machine ca. 2,5 t With the SBM-L 1000 G1S2, which works in the dry process, in alternating operation Steel, stainless steel and aluminum can be machined. She deburrs and rounds the edges on the outer and inner contours of punched, laser, fine plasma or water jet cut workpieces with a thickness of up to 50 mm on both sides in just one operation. * Two sanding units, 1 each on the top and bottom, remove spatter and slight burrs on outside and inside edges of sheet metal. * A total of four sanding belts, 2 each on the top and bottom Underside, process the sheets on both sides at the same time. here All edges are softened or rounded, depending on the tool settings. * Machining on both sides saves time-consuming turning of the workpieces and edit twice. * All pairs of aggregates can be switched on/off separately depending on the application as well as to be set. * Including Siemens S7 control: - Easy and comfortable operation through intuitive user interface - High operating security through 3 password-protected user levels Bodsuia Dqepfx Aihewp - Integrated program memory - USB / RJ 45 interface for data exchange or connection of external Components (e.g. barcode scanner) - Direct entry of material thickness via touch panel - All axes automatically adjust to preselected material thickness - Standby position for deactivated aggregates - Service-friendly (e.g. plain text error messages) consisting of: - Grinding machine SBM-L 1000 G1S2 (kit) - 4x sanding belts SBM 1000 with bar P60 SiC - Sanding belt SBM-L 1000 L=3125 B=70 P80 Cubitron 2 784F - SBM-L tool wear compensation Siemens S7 - DDE 3002 dry suction - Standard piping DDE 3002 / WDE 3002 for SMD 123, SMD 133 Further detailed technical data on request. The machine is in stock Niederlangen available immediately.

Condition: excellent (used), Weiss Type: WKL 34/60 Weiss Climate Chamber, Air-Cooled Refrigerant converted to R-452A -60°C to 150°C Volume: 34 liters Installed in basic configuration: R1 NW 50 mm L1NW 120 mm Internal dimensions: Height 310 mm, Width 324 mm, Depth 300 mm External dimensions: Height 1740 mm, Width 630 mm, Depth 970 mm Performance data for temperature tests: Temperature range -60 to +150 °C Temperature differences in steady state, according to IEC 60068-3-5 Temperature fluctuation over time in the center of the usable space ± 0.3 to ± 1 K ± 1 to ± 2 K Temperature deviation spatially (corresponds to temperature gradient) 2 to 4 Temperature change rate (according to IEC 60068-3-5) Heating 2.5 K/min Cooling 3 K/min Heat compensation max. 550 W Performance data for climate tests: Temperature range +10 to +95 °C Humidity range 10 to 98 % RH Temperature and humidity differences (in steady state, according to IEC 60068-3-5) Temperature fluctuation over time in the center of the usable space ± 0.3 to ± 0.5 K Temperature deviation spatially ± 0.5 to ± 1.5 (corresponds to temperature gradient) 1 to 3 Humidity fluctuation over time in the center of the usable space ± 3 to ± 5 % RH Operating data: Test chamber lighting Halogen bulb 12V, 20W Rated voltage 1/N / PE AC 230 V ± 10 % 50 Hz Rated power 2.5 kW Rated current 11 A Fuse on customer side 16A slow-blow Heat dissipation of air-cooled test chambers Max. heat dissipation to the environment 1700 W Refrigerant: R-452A / R23 Weight: 140 kg For your safety as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate Bjdpfx Aezgr U Rsihjwp 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: new, Panel saw ALTENDORF F 35 Type 3 - 1000 5.5 kW (7.5 hp), 3 speeds, Motorized height and tilt adjustment, Large protective hood, Double roller carriage 3,200 mm, Scoring unit with LED lighting, CNC parallel fence, cutting width 1,000 mm, Angle-mitre stop 3,450 mm, without length compensation, Table extension/table widening:, With high-quality CDF surface ----- Technical data ----- Swivel range: 0 - 46°, Carriage length: 3,200 mm, Cutting length: 3,100 mm, Cutting width: 1,000 mm, Cutting height: 154 mm, max. saw blade Ø: 450 mm, Motor power: 7.5 kW, Bsdpfownr Ehjx Aihewp Screen size: 15 inches, Working table height: 910 mm, Suction connection Ø: 80 + 120 mm

Condition: new, Panel Saw ALTENDORF F 35 Type 3 - 1000 -Exhibition Machine- 5.5 kW (7.5 HP), 3 speeds, Motorized height and tilt adjustment, Large protective hood, Double roller carriage 3,200 mm, Scoring unit with LED lighting, CNC rip fence, cutting width 1,000 mm, Angle-mitre fence 3,450 mm, without length compensation, Bwjdpsw Imptofx Aihep Table extension/table widening, High-quality CDF surface ----- Technical Specifications ----- Tilting range: 0 - 46°, Carriage length: 3,200 mm, Cutting length: 3,100 mm, Cutting width: 1,000 mm, Cutting height: 154 mm, Max. saw blade Ø: 450 mm, Motor power: 5.5 kW, Screen size: 15 inch, Table height: 910 mm, Extraction port Ø: 80 + 120 mm - New exhibition machine -

Condition: excellent (used), turning diameter over cross slide: 300 mm, turning length: 510 mm, Model: 2100 LYB Control: Fanuc i Series Year: 2019 Turning Diameter: 300mm Turning Length: 510mm ‘X’ Axis Travel: 205mm ‘Y’ Axis Travel: 105mm ‘Z’ Axis Travel: 560mm Spindle Speed: 4500 RPM Spindle Power: 15KW Spindle Torque: 169N-M Machine With: 200mm Power Chuck Driven Tools (1-AxiaL -1- Radial) Tool Eye Parts Catcher Filtermist Bjdjy N Uqiopfx Aihewp Dimensions: 2880 x 1711 x 1921 High Weight: 3900 Kgs

Condition: good (used), Year of construction: 1996, Lifting device, adjustable traverse, crane traverse, crane hook traverse, load traverse, heavy-duty traverse, compensating traverse, lifting device, material hoist for lifting platform, overhead crane, column jib crane, workstation crane, chain hoist -Manufacturer: Korrmann, compensating traverse for transporting different loads Bjdpfxoy H Ipmj Aihswp -Type: TRV 12 -Loading capacity: 12 t -Transport dimensions: 260/10000/H560 mm -Empty weight: 980 kg

Condition: good (used), Year of construction: 1996, Lifting device, adjustable traverse, crane traverse, crane hook traverse, load traverse, heavy-duty traverse, compensating traverse, lifting device, material hoist for lifting platform, overhead crane, column jib crane, workstation crane, chain hoist -Manufacturer: Korrmann, compensating traverse for transporting different loads -Type: TRV 10-5 -Loading capacity: 10 t -Transport dimensions: 5400/360/H840 mm Bwedpfx Aiey D Hpaohjp -Empty weight: 580 kg

Condition: good (used), Year of construction: 1997, Lifting device, adjustable traverse, crane traverse, crane hook traverse, load traverse, heavy-duty traverse, compensating traverse, lifting device, material hoist for lifting platform, overhead crane, column jib crane, workstation crane, chain hoist -Manufacturer: LHS load handling equipment, compensating spreader beam for transporting different loads -Type: TIV 10-6 Bjdjy D Hk Rspfx Aihswp -Loading capacity: 10 t -Transport dimensions: 6030/410/H930 mm -Empty weight: 720 kg