Climate test chamber with humidity

Weiss -72°C bis +180°C WK3-340/70

Condition: good (used), Dust extraction unit, extraction system, self-cleaning vacuum filter, absorber, dust collector for extracting graphite, metal, mineral, hard fiber, flammable, hazardous, and toxic dust, and for the effective collection of process dust, blasting dust, sanding dust, grinding dust, polishing dust, and all types of dry dust. Nsdog Rhfbopfx Aazodb The extraction unit has explosion hazard classes ST1 and ST2. The vacuum fan is located behind the filter on the clean air side, which minimizes the risk of explosion. Filter cartridge – multi-pocket design. 11 kW fan in a sound-absorbing housing. Capacity: 3500 m3/h. Vacuum: 7000 Pa. Filtration area: 24 m2. Automatic filter cleaning with an electric motor. The extraction unit was used during graphite processing.

Condition: excellent (used), CTS Type: C-40/350 Air-cooled Climate Test Chamber For sale is a professional CTS climate test chamber, model C-40/350. This device is designed for demanding environmental simulations in industrial applications and is ideal for material testing, electronics, automotive, aerospace, and research. Temperature Testing: - Temperature range: -40°C to +180°C - Temperature deviation: ≤ ±0.3 K over time - Temperature change rate according to IEC 60068-3-5: - Heating: 3.5 K/min - Cooling: 4 K/min - Heat compensation: - Approx. 3500 W at +20°C - Approx. 2000 W at -20°C Climatic Testing: - Temperature range: +10°C to +90°C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to +78°C - Temperature deviation: ≤ 1.0 K over time - Humidity deviation: ≤ ±3.0% r.h. over time Technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without heat compensation, and without additional accessories. Options may influence performance data. Nodpszizmzsfx Aazodb Technical Specification: - Refrigeration unit: Air-cooled, low-noise, fully hermetic, infinitely variable performance adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A - Test chamber floor load: 150 kg/m² - Shelf: Stainless steel, support surface 620 x 600 mm - Maximum load per shelf: 35 kg - Total load with maximum number of shelves: 100 kg Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numeric entry of setpoints - Plain-text error messages - RS 232 interface - Ethernet interface - Free switching channels for external test sample control Dimensions: - Test volume: 350 liters - Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm - External dimensions: Height 1800 mm × Width 920 mm × Depth 1670 mm Operating Data: - Electrical connection: 400V 3/N, 50 Hz - Rated power: 7.1 kW - Rated current: 11.5 A - Protection class: IP 54 - Sound pressure level:

Condition: used, Year of construction: 2007, total height: 1,750 mm, total length: 1,000 mm, total width: 1,810 mm, Colour: Grey Weight: 1.240 kg - Year: 2007 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 100658 - Main motor power [kW]: 7.5 - Arbor saw blade diameter [mm]: 30 - Voltage [V]: 400 Nedpfewniuajx Aazsdb - Power [kW]: 8.0 - Transport dimensions: 1000mm x 1810mm x 1750mm (l x w x h) - Transport weight [kg]: 1240kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Type: ARS-1100-AE Temperature and climate testing chamber with humidity control Air-cooled Temperature and humidity chamber Temperature range: -70°C to +180°C Rate of temperature change up to 5 K/min. Humidity range: 10 to 98% RH Internal dimensions: 1100 W x 1000 H x 1000 D mm Ndjdezvdk Nepfx Aazeb External dimensions: 1300 W x 1955 H x 2005 D mm Approx. 1100 liters AC 400 V 3-phase, 50 Hz, 29 A Weight: approx. 765 kg Refrigerant: R404A and R23 For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are reserved!) We would be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Weiss Type: WK11 - 600/70/5 Weiss Climate Chamber Water-Cooled The Weiss climate chamber WK11-600/70/5 with approximately 600 liters usable volume is suitable for temperature and humidity testing, as well as for the conditioning of samples and materials in a range from −70 °C to +180 °C. Simcon/32 - Net controller Technical Data: Test chamber designation: WK11-600/70/5 External dimensions with hinges and door lock: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock: Height 1995 mm, Width 1000 mm, Depth 800 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Feedthroughs: 2x R1 NW 125 mm ∅ 1x L1 NW 50 mm ∅ Test chamber volume: approx. 600 liters Temperature Test Data: Temperature range: -70 °C to +180°C Temporal temperature deviations at the center of usable space: ±0.1 to ±0.5 K Spatial temperature deviations: ±0.5 to ±2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 6 K/min Cooling: 6 K/min Heat compensation: At +20 °C: 5000 W At -20 °C: 5000 W Climate Test Data: Temperature range: +10 to +95 °C Humidity range: 10 to 98% r. H. Temporal temperature deviations at the center of usable space: ±0.1 to ±0.3 K Spatial temperature deviations: ±0.5 to ±1 K Temperature gradient: 1 to 2 Humidity fluctuation (temporal, center of usable space): ±1 to ±3% r. H. Heat compensation: 500 W 3/N/PE AC 400V ±10% 50Hz Rated power: 16.5 kW Rated current: 29 A Main fuse (to be provided by customer): 32 A slow-blow Permissible test material weight: Total load of racks: 80 kg Test chamber floor: 80 kg, Insert rack: 40 kg Weight: 675 kg Refrigerants: R452A / R23 Important Note: Ndsdpezimg Hefx Aazeb "The table shown in the photos is not included in the sale." For your safety as a buyer, please note the following information: The following points are completed on our offered chambers beforehand: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical specifications subject to change and errors excepted!) We are happy to answer any further questions over the phone.

Condition: used, Year of construction: 2009, negative pressure: 16,000 Pa, filter area: 40 m², volume flow: 5,800 m³/h, RUWAC dust extractor, extractor, dust collector, vacuum filter, self-cleaning, dust collector for extraction of metal dust, mineral dust, hard fibers, combustible, hazardous, toxic substances and efficient collection of process dust, sandblasting, sodding, grinding, polishing and all kinds of dry dust. Thanks to the wide performance range, these devices are perfectly suited for almost all applications applications - both as a single-station solution and as a central solution. All dust collectors are equipped with large-size filters for dust class M. The unit in the version with dust explosion protection (ATEX zone 22) - EX II 3D , T= 70 °C The high-pressure fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Pocket filter cartridge - multi-pocket (area of 40 m2) 20 Kw fan. The unit has a frequency converter (Danfoss VLT). Capacity 5800m3/h Vacuum 16,000 Pa Electromotive cleaning of the filter by means of vibrating motors. Nedpfx Aotqt Uxeazsdb Complete with dispenser (for sticky dusts) for automatic addition of filter additives to protect filter cartridges. Inlet diameter - 300 mm

Condition: excellent (used), Weiss WK3-340/70 Climate Test Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: WK3-340/70 Machine Type: Climate Test Chamber / Temperature and Humidity Test Chamber Test Chamber Volume: approx. 335 liters For sale is a used Weiss WK3-340/70 climate test chamber with programmable touch panel control. The unit is suitable for temperature and humidity tests, environmental simulation, material testing, electronics and component testing, quality assurance, as well as development, aging, and stress tests. Technical Data: Temperature range: -72 °C to +180 °C Cooling rate: approx. 3 K/min Heating rate: approx. 3 K/min Nsdpoz A A T Hefx Aazodb Climate range: +10 °C to +95 °C Humidity range: 10 to 98 % RH Dew point range: -3 °C to +94 °C Test chamber volume: approx. 335 liters Refrigerant: R404A / R23 Refrigerant quantity: 2.5 kg / 0.55 kg Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 5.5 kW Rated current: 16 A Dimensions: Internal dimensions (H × W × D): approx. 750 × 580 × 765 mm External dimensions (H × W × D): approx. 1,775 × 870 × 1,600 mm Equipment: Programmable touch panel control Temperature and humidity control Air-cooled design Stainless steel interior Large viewing window Test chamber lighting Specimen port on the right, NW 125 mm Specimen port on the left, NW 85 mm Stainless steel inserts Adjustable feet Program and manual operation Shipping Information: Dimensions (H × W × D): approx. 1,775 × 870 × 1,600 mm Weight: approx. 585 kg Shipping via freight forwarder possible Condition: Used Optical condition as shown in the pictures. Scope of delivery: Weiss WK3-340/70 climate test chamber Touch panel control Stainless steel inserts as shown in the pictures Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: 'The table shown in the photos is not included in the sale.' Condition: used Ndsdpfx Aszimgtjazsb Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Year of construction: 2014, condition: excellent (used), Vötsch VCS³ 7034-5 Climate Testing Chamber / Temperature and Humidity Testing Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VCS³ 7034-5 Machine Type: Climate Testing Chamber / Temperature and Humidity Testing Chamber Test Chamber Volume: approx. 335 liters For sale is a used Vötsch VCS³ 7034-5 climate testing chamber with temperature and humidity control, programmable touch panel control, and water-cooled design. The system is suitable for professional temperature and climate testing, humidity testing, environmental simulations, material testing, electronics and component testing, as well as for research, development, and quality assurance. Technical Data: Manufacturer: Vötsch Industrietechnik GmbH Temperature Range: -70 °C to +180 °C Humidity Control: included Water-cooled design Test Chamber Volume: approx. 335 liters Power Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 9 kW Rated Current: 20 A Refrigerant 1: R404A, 2.50 kg Refrigerant 2: R23, 0.75 kg Equipment: Programmable touch panel control Temperature control Humidity control Water-cooled design Stainless steel interior Large viewing window Test chamber lighting Separate digital temperature and humidity display Several stainless steel inserts in the test chamber Program mode and manual mode Test specimen port Ø 125 mm Additional test specimen port Ø 50 mm Front main switch Electrical connection with approx. 3.5 m connection cable Connection for condensate drain / overflow Cooling water connection Connection for demineralized water Compressed air connection Dimensions: External Dimensions (W × D × H): approx. 872 × 1,758 × 1,800 mm Internal Dimensions (W × D × H): approx. 580 × 765 × 750 mm Weight: approx. 585 kg Transport Data: Njdpjz Akcfsfx Aazodb Dimensions (W × D × H): approx. 872 × 1,758 × 1,800 mm Transport Weight: approx. 585 kg Condition: Used Optical condition as shown in the pictures. Scope of Delivery: Vötsch VCS³ 7034-5 climate testing chamber Programmable touch panel Stainless steel inserts as shown in the pictures Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.