Used Enflex F 1400 for sale (34,566)

Condition: good (used), Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake Gkedpfx Aljb A Nlrs Sec -Tool: for press brake -Tool radius: 5 mm -Dimensions: 45 x 220 mm -Length: 2400 mm -Weight: 120 kg

Condition: good (used), electric motor, three-phase motor -Power: 0.37 kW -Speed: 1400 rpm -Shaft diameter: 14 mm -Brake -Design: B5 -Protection class: IP 54 -Weight: 12 kg Godpjb A N Dhsfx Al Sskc

Condition: good (used), Forced mixer, agitator, stirring device, mixing tool, stirrer -Nominal input: 1400 watts -Connection: 230 volts -Speed: 150-470 rpm -Dimensions: 920/450/H220 mm Gjdpfx Aljb A Rgde Sjkc -Weight: 8 kg

Condition: good (used), electric motor, three-phase motor Gsdpfx Aob A R Dhel Sokc -Power: 1.15 kW -Speed: 500 rpm -Shaft diameter: 19 mm -Design: B5 -Protection class: IP 44 -Weight: 11 kg

Condition: good (used), electric motor, three-phase motor -Power: 0.37 kW -Speed: 1400 rpm -Shaft diameter: 14 mm Gsdpfxjb A R Dij Al Sjkc -Brake -Design: B5 -Protection class: IP 54 -Weight: 11 kg

Condition: good (used), Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck Gedpfx Aegp Tm Sel Sokc -Manufacturer: Forkardt, wedge bar chuck with clamping plate -Chuck size: Ø 250 mm -Bolt circle: Ø 235 mm -Mounting: Short taper 11 (196.8 mm) -Through hole: 60 mm -Total dimensions: Ø 400 x 265 mm -Weight: 67 kg

Condition: used, axle configuration: 3 axles, first registration: 05/2004, color: other, Year of construction: 2004, Empty weight: 4.740 kg Axle 1: left 8 mm right 8 mm Gkjdoynhvzjpfx Al Soc Axle 2: left 8 mm right 8 mm Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers!

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Meat Mincer Düker-Rex AW 98 / 1400 Complete V2A stainless steel construction. In very good condition with sorting device. See photos. Gksdpfx Aoynkb Hol Sec Year of manufacture: Würzburg 07 / 2021 Machine is plug-in ready and workshop-tested. Further details upon request. Payment by cash or advance bank transfer. Sale only to commercial buyers. No warranty, no liability.

Condition: good (used), 2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punch tool: Stroke 20 mm -Hole Ø 50 mm -Sheet width: up to 993 mm -Punch dimensions: 96 cutouts 22 x 3.5 mm -Individual components: see photos Gjdpoyv Aptjfx Al Sokc -Dimensions: 1400/820/H380 mm -Weight: 732 kg

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: SUDA, controller model: Raytools, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus 6000W, laser wavelength: 1,064 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 16 mm, sheet thickness aluminum (max.): 14 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 6 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, input voltage: 400 V, type of input current: three-phase, type of cooling: water, total length: 8,450 mm, total width: 2,950 mm, total height: 2,320 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Sale – 5% Off New and fully operational CNC fiber laser cutting machine designed for fast and precise sheet-metal processing. The MTP F-6000 is equipped with a 6000 W Raycus laser source, an automatic-focus cutting head and a 3000 × 1500 mm worktable. The solid, heat-treated machine frame provides high rigidity, resistance to deformation and consistent cutting accuracy over many years of operation. The machine is suitable for production plants, metalworking companies and manufacturers of steel structures. KEY SPECIFICATIONS: • laser power: 6000 W • laser source manufacturer: Raycus • technology: fiber laser • wavelength: 1064 nm • working area: 3000 × 1500 mm • control: CNC • cutting head: Auto Focus • cooling system: water-cooled • power supply: 400 V, three-phase • operation: automatic MAXIMUM CUTTING THICKNESS: • mild steel: up to approximately 25 mm • stainless steel: up to approximately 16 mm • aluminium: up to approximately 14 mm • brass: up to approximately 8 mm • copper: up to approximately 6 mm The maximum cutting thickness depends on the type and quality of the material, the assist gas used and the selected cutting parameters. KEY FEATURES: • automatic-focus cutting head • CNC control system • precision linear guides • helical rack-and-pinion drive • rigid and stable construction • automatic central lubrication system • water-cooling system • fully enclosed protective housing • fume extraction system • emergency stop • CE marking STANDARD EQUIPMENT: • Raycus 6000 W laser source • Auto Focus cutting head • CNC control system • water chiller • extraction system • 3000 × 1500 mm worktable • protective enclosure • central lubrication system • documentation and operating manual • safety light curtain OPTIONAL EQUIPMENT: • air compressor • dust extraction system • automatic exchange table ADVANTAGES: • high cutting speed and productivity • excellent edge quality and repeatability Gsdoyv Dx Ajpfx Al Sjkc • high positioning accuracy • low operating costs • simple and convenient operation • construction designed for industrial production APPLICATIONS: • sheet-metal processing and cutting • manufacturing of steel structures • automotive industry • HVAC and ventilation industry • production of enclosures, cabinets and metal components • serial and custom production MACHINE DIMENSIONS: • length: 8450 mm • width: 2950 mm • height: 2320 mm TRANSPORT: • free transport within Poland • transport to other European countries quoted individually Year of manufacture: 2026 Condition: new, fully operational Location: Fabryczna 1, 08-300 Sokołów Podlaski, Poland

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. Gkodpeyug Hxsfx Al Soc The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. Gsdpfx Aloyug R Rj Sskc The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: excellent (used), first registration: 03/2017, loading space length: 94,100 mm, loading space width: 2,550 mm, color: green, Year of construction: 2017, Unladen weight: 4,100 kg Payload: 14,900 kg Gross vehicle weight (GVW): 19,000 kg Loading platform height: 90 cm Technical condition: very good Visual condition: very good ACKERMANN 1-AXLE SEMI SPECIAL FOR CRANE TRUCK 1 AXLE, AIR SUSPENSION BPW AXLE CHASSIS FULLY HOT-DIP GALVANIZED ALUMINUM SIDE WALLS LOWBED HEIGHT 90 CM NECK LENGTH: 370 CM LOADING PLATFORM LENGTH: 590 CM TOTAL SEMI LENGTH: 940 CM TRAILER IS IN EXCELLENT CONDITION Gjdpfsyffpmox Al Sokc

Condition: good (used), mileage: 335,000 km, power: 367.75 kW (500.00 HP), fuel type: diesel, axle configuration: 4x2, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2021, Equipment: ABS, air conditioning, cruise control, differential lock, navigation system, onboard computer, parking heater, traction control, FORD F-MAX 500 / ACC / LED / 2021 / STANDARD Bought and serviced at Ford Poland, full documentation, tires 315/70R22,5 – 80% Year 2021 First registration 11.2021 Godsv T I Nzjpfx Al Sjkc Transmission: Automatic Mileage: 335 000 km Power 500 km Euro 6 2 fuel tanks Equipment: air suspension differential lock sleeping cab – 2 beds LED headlights refrigerator air conditioning webasto navigation Apple CarPlay adaptive cruise control lane departure warning hill start assistant emergency braking assistant axle load indicator The vehicle is available for viewing at our lot in Krakow. Please contact us before visiting to confirm availability and schedule a viewing. We can send additional photos and videos of the vehicle.  If you have any questions, please contact us by phone or WhatsApp  Additionally, we offer: -Export plates and insurance -Transport to any location within the EU -Preparation of export documents Ask the seller for details. Check out our full selection of vehicles in our other listings

Condition: used, Electric motor, three-phase motor Gkododd Ncqjpfx Al Sjc -Power: 0.48/0.3 kW -Speed: 700/1400 rpm at 50Hz -Shaft diameter: 14 mm -Construction: B5 -Protection class: IP 44 -Price: per piece -Number: 2x available -Dimensions: 315/150/H195 mm -Weight: 11.9 kg

Condition: used, Three-phase motor, electric motor -Power: 2.2 kW -Speed: 1400 rpm -Shaft: Ø 25 mm -Construction: B5 -Protection class: -Number: 2 motors available -Price: per piece -Dimensions: 380/310/H250 mm Gksdpfx Aljdkbfvj Sjc -Weight: 38 kg

Condition: good (used), electric motor, three-phase motor -Power: 0.37 kW -Speed: 1400 rpm Gksdpfxsb A Ha Hs Al Sjc -Shaft diameter: 14 mm -Brake -Design: B5 -Protection class: IP 54 -Weight: 12 kg

Condition: good (used), Year of construction: 2000, Tray trolley, paint drying trolley Gsdpfx Aleb A Hcms Sjkc -Total length: 1400 mm -Total depth: 960 mm -Total height: 2000 mm -Compartment height: 28 mm -Shelf load capacity: max. 15 kg -Number: 2 cars available -Price: per piece -Weight: 127 kg/piece

Condition: good (used), Year of construction: 1981, Radius/flush milling machine, edge milling machine, edge router, shaped parts milling machine For simultaneous upper and lower radius/flush milling of protruding edge materials on straight edges as well as curved workpieces with inside and outside radii. -Built-in milling cutters: 30° Gjdpfsb A Hfqjx Al Sokc -Dimensions: 1000/600/H1450 mm -Weight: 60 kg

Condition: good (used), Clamping plate, welding table, welding table, straightening plate Gksdpfob A Hu Djx Al Sec -Width: 1750 mm -Length: 1400 mm -Elevation: 840 -with: supporting ribs -Weight: approx. 1000 kg

Condition: good (used), Hydraulic pump, oil pump, gear pump -Recording wave: -Dimensions: 180/160/120 mm Gedeb A Sizjpfx Al Sekc -Weight: 4.5 kg

Condition: new, Stromab Matrix F Automatic Fully Programmable Cross Cutting & Notching Machine A heavy duty optimising upstroke crosscut and notching machine, designed for programmable and repetitive cutting and notching from standard and / or random lengths of timber. The saw unit has a pneumatic upstroke action with variable speed control, The notching unit is independent of the saw and therefore allows for programming of the saw or notching either as separate program's or as one single job. The pusher / feed is fitted with a heavy duty rack and pinion drive feeding system for fast positioning giving a high level of repeat cutting accuracy. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while giving the operator a clear view of the cutting area still gives complete protection. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. For additional operator safety the rear of the pusher system is guarded, while there is a full length safety pull cord on the front infeed table. Programming and entering of cutting lists is very simple through a colour touch screen controller with graphic representation of the cut pieces. The machine offers full optimisation and also has the added optional facilities of defect cutting and remote programming from PC or laptop with transfer vis USB key or network. Additional options also include - extended outfeed table and label printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Saw unit Self braking saw motor 10hp Saw blade diameter 500mm Max cutting width 360mm ( refer to chart ) Max cutting height 135mm ( refer to chart ) Dust extraction 4 x 100mm diameter Milling Unit Self braking milling motor 5.5hp Pneumatic milling stroke with adjustable speed Max milling stroke 400mm Max milling width 100mm Max milling depth 60mm Dust extraction 2 x 125mm and 2 x 100mm Push feed system 3000 to 13000mm Precision rack and pinion drive to pusher with magnetic reading tape giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Piece length reading photocell Positioning speed 100m/min Positioning accuracy + /- 0.4mm Touch screen control unit Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. - 6 optimising criteria - longest size, minimum waste, sequence, priority size, by volume or by value. - 1000 cutting lists - 10,000 lines per list. Gkjdpfjdy Hrdjx Al Ssc - Cutting list entered via controller key pad or via remote PC using PC or cable - Graphic description of the workpiece.

Condition: good (used), Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump -Drive: 1.5 kW 2910 rpm Gjdpfx Alsdzryke Sekc -Max. flow rate: 23.6 m³/h -Max. pressure: bar Maximum temperature: 100 °C Quantity: 1 piece available -Dimensions: 250/300/H755 mm -Weight: 60 kg

Condition: used, adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.37 kW -Speed range without angular gear: 170-1000 rpm -Speed range with angular gear: 22.5-133 rpm -Motor: adjustable -Hollow shaft: Ø 24 mm -Construction: B14 angle -Number: 1 piece of motors available -Price: per piece -Dimensions: 460/190/H200 mm -Weight: 17 kg Gkjdpjc I Rk Nsfx Al Ssc

Condition: good (used), Lightbus combination input/output module, input/output module, parallel input/output Gedpfx Aedngwhjl Sskc -Manufacturer: Beckhoff, input-output module -Type: M-1400 -Input voltage: 24V DC -Price per piece -Number: 9x available -Dimensions: 270/75/H70 mm -Weight: 1kg/pc.