Used Engel Duo 17060/2000 for sale (9,003)

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 Dwsdpfx Aszizkyjggsb For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 11,337 h, functionality: fully functional, machine/vehicle number: 234917, clamping force: 1,600 kN, screw diameter: 30 mm, Equipment: documentation/manual, The machine comes from a cleanroom production environment and has been operated exclusively with PP material. As a result, the screw is in very good and well-maintained condition. TECHNICAL DETAILS Dodpfoy A Exdjx Aggjwb Clamping force: 1,600 kN Screw diameter: 30 mm MACHINE DETAILS Weight: 8,400 kg Operating hours: 11,337 h EQUIPMENT Documentation/Manual Comprehensive special equipment

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, Beschreibung: 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ENGEL Typ: ES650H/200W-200HL-2F Baujahr: 2001 Schließkraft: 200 Tonnen Holmabstand Holmlos Djdpfx Aozl T Snsggjwb Einbauhöhe min.: 550 mm Öffnungsweg: 700 mm Schnecken DN 1: 40 mm Max. Hubvolumen: 251 cm³ Spritzteilgewicht in PS: 216 g Schnecke DN 2: 25 mm Max. Hubvolumen: 69 cm³ Spritzteilgewicht in PS: 60 g Steuerung: CC200 Technische Ausstattung: -Roboter Engel, Typ: ERC23/1-E -4 Stück Kernzüge -Drehtischsteuerung

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 350-2000 AX / Electric Machine / Production line with the Krauss Maffei LRX150-1018 robot Year of manufacture: 2011 Dsdpfszy Ipksx Aggowb Injection unit: Screw diameter: 60 mm Shot weight: 720 g Injection pressure: 2420 bar Dosing volume: 792 ccm Clamping unit: Clamping force: 350 t Tie bar spacing: 810x730 mm Mold size: 1110x1030 mm Ejector: electric Clamping unit: toggle Control system: MC6 - Touchscreen Additional equipment: Electric machine: energy-saving and very quiet Euromap 67 Robot interface Air core puller x 2 on the side of the fixed mold platen Hydraulic core puller x 3 on the side of the moving mold platen Control system with hot runner system x 10 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by an inverter - energy saving Central lubrication Parallel movements Automatic tool height adjustment Robot Krauss Maffei LRX150-1018 Year of manufacture: 2011 5-axis robot: 4 axes are driven by servo motors (electric): X, Y-telescopic, Z, B-rotation; Axis C – pneumatic Travel distances in axes: X-900, Y-1800, Z-2500 Safety package for robot Robot with adapter, conveyor belt and protective housing Purchase of the robot and the conveyor belt at an additional cost Dimensions: Weight: 22600 kg Length/Width/Height: 8.00x2.35x2.30 m All machines offered will be started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: good (used), Year of construction: 2012, Machining center Eumach TVMC 2000 - 5-axis XYZ: 2000 x 750 x 750 mm A: 360 degrees B: 120 degrees Dedjzy D Dqjpfx Aggewb Spindle speed: 14,000 rpm Spindle: SK 40 Weight: 22,000 kg

Condition: good (used), Year of construction: 2000, functionality: fully functional, Used FELDER CF 731 S Professional combination machine, manufactured in 2000. Compact and versatile woodworking machine with a panel saw, table router, jointer, and thickness planer. The machine features a sliding table with a cutting length of approximately 2,700 mm, as well as a large extension table with a rip fence. The planing unit is equipped with a 4-knife cutterhead. The router spindle is pivotable and has a router fence with a protective cover. Thanks to its extensive features, the machine is particularly suitable for carpentry shops, joineries, and smaller workshops. Technical data / Equipment Manufacturer: FELDER Type: CF 731 S Professional Year of manufacture: 2000 Machine No.: 80-02/140-00 Voltage: 400 V Frequency: 50 Hz Motor power: 4 kW Rated current: 8.6 A Speed: approx. 3,400 rpm Panel saw: Sliding table Cutting length approx. 2,700 mm Extension table Rip fence with measuring scale and fence flap Parallel fence Saw unit pivotable Height adjustment via handwheel Table router: Pivotable router spindle Router fence Router guard Height and angle adjustment Dust extraction connection Jointer/Thickness planer: 4-knife cutterhead Jointer fence Jointer tables can be folded up Thickness planer Dsdszzaw Aopfx Aggewb Mechanical height adjustment The machine is in used condition with corresponding signs of wear. The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Transport is possible for an extra charge! Technical data and equipment may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Condition: excellent (used), Year of construction: 2002, Engel ES 750/300 HL Year of manufacture: 2002 Screw diameter: 55 mm Clamping force: 300 tons Dwjdpsxvm Scjfx Aggeb

Condition: used, Year of construction: 1998, operating hours: 129,241 h, functionality: unexamined, machine/vehicle number: 37064, clamping force: 800 kN, overall weight: 5,900 kg, Year of manufacture: 1998 Serial number: 37064 Weight: 5,900 kg Operating hours: 129,241 hours (as of 02/2025, continued operation until 12/2025) with ERC handling arm Dodjzv Rdiopfx Aggswb with Piovan material separator C10IX, SN: 3AL 9945 / Year of manufacture: 1998 with 2x Piovan temperature control units ETM09 with Engel ERC 23/3-CL, serial number 93996, year of manufacture 1998 Functionality and technical data have not been verified. without any further items/without any further accessories, unless explicitly stated as part of the item. If interested, please contact us via email!

Condition: excellent (used), Year of construction: 2003, Engel ES,1350/250 HL Clamping force: 250 tons Dwodpfexvmndox Aggsb Year of manufacture: 2003 Screw diameter: 55 mm Injection volume: 618 cm³ Enlarged mounting platen 1050x900 mm Crane traverse x3 Air valve x3 Plus: Engel robot E - PIC Z Year of manufacture: 2017

Year of construction: 2006, condition: used, 6 beer dispensing tanks, manufactured by DUOTank, each with a capacity of 10 hectoliters, 3 bar, but without documentation. Each set consists of 2 tanks stacked on top of each other in a frame. The tanks are insulated and equipped with pressure fittings and a yeast outlet. Dodpfxezkah Hj Aggowb 1 spray head with a manhole cover for all tanks. Year of manufacture: 2006/2007.

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Dodpsxxb Rrofx Aggowb Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2016, condition: excellent (used), MASA hydraulic press for slabs Year: 2016 Dsdpfx Ageyhlkpogowb Type: Uni 2000-600/7, 7 stations, pressing force 600 tons Moulds: 60x60 cm, max thickness 10 cm Transport system (finger car) to curing chamber 3,000 steel curing pallets; 250 galvanized control conveyors 8 curing chambers with ventilation and steam pipe Pallet brushing unit with filtering unit, max width 400 to 600 mm Manual packaging system REX-2000 calibrating station, 2 workstations 6-head grinding machine Kraft Energy curing system Chamfer grinding machine, 12 m drying line, 8 fans Complete Teka concrete plant (2 mixers: 750 L and 325 L) with 8-compartment storage bin with extraction belt, bucket weigher on load cell External storage silo with 50-meter belt conveyor. Reversible belt on top 8-bin storage hopper Laminating system for special tiles for bonding steel sheet under the slab Stacking device for curing chambers

Condition: excellent (used), Year of construction: 2007, Engel Victory 3550/400Tech Clamping force 400 tons Year 2007 Screw 90 mm Shot weight approx. 2228 g CC 200 Enlarged clamping platen 1200x1100 mm Plus Engel Robot ERC/1-F Year 2009 The machine is in two parts: 20 tons + 7.5 tons Dwjdpowyb Szjfx Aggeb

Condition: excellent (used), Year of construction: 2004, Engel Victory 330/80 Phoenix Clamping force: 80 tons Year of manufacture: 2004 Dwsdexq Ti Ropfx Aggjb Screw diameter: 40 mm

Condition: excellent (used), Year of construction: 2016, operating hours: 9,000 h, functionality: fully functional, turning length: 510 mm, turning diameter: 360 mm, spindle speed (max.): 5,000 rpm, spindle bore: 76 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, bar diameter (max.): 66 mm, CNC turn-mill center DMG MORI NLX 2000 / 500 SY Year of manufacture: 2017 Control system: Celos with Mitsubishi M 7300 Operating hours: 24,800 h Program running hours: 9,000 h Main spindle speed: 0 - 5,000 rpm Drive power: 11/15 kW Counter spindle speed: 0 - 4,500 rpm Drive power: 7.5/11 kW Bar diameter (main spindle): 66 mm Bar diameter (counter spindle): 43 mm X-axis: 260 mm Y-axis: +/- 50 mm Z-axis: 590 mm Turret: 20 stations Speed: 0 - 10,000 rpm Drive power: 3.5/5.5 kW Accessories: - High-pressure system 40 bar - Tool measurement system - Chip conveyor Djdpfozfguvjx Aggswb - Bar loader LNS - Workpiece collection tray

Condition: used, Year of construction: 1993, Engel ES 80/50 HL (1993) Dwsdpfezu R Hzjx Aggjb

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: N70089, MACHINE SPECIFICATION Swing over bed 400mm Swing in gap 585mm Swing over cross slide 246mm Distance between centres 1250mm Dwjdezx R Hpopfx Aggjb Spindle nose (Camlock) D1-6 Spindle bore 54mm Spindle motor 7.5kW Spindle speeds (programmable) 15-2700rpm Tailstock quill taper No. 5 MT Approximate nett weight 2200Kg Machine Equipped with Fanuc OiTC CNC Control System Hydraulic 3 jaw chuck 8 Station turret 8 off VDI toolholders Guarding Coolant system Lighting

Condition: excellent (used), Year of construction: 2004, Engel Victory 1350/220 Tech, clamping force 220 tonnes, year of manufacture 2004. Clamping plate dimensions (W x H): 860x830 mm. Screw diameter: 55 mm, volume: 618 cm³, center distance: 200 mm. Minimum mold height: 250 mm, maximum: 730 mm. Dedpfx Aexu Rlksggowb

Condition: good (used), Year of construction: 2006, operating hours: 107,027 h, functionality: fully functional, Clamping force 200 kN Screw diameter D55 mm Max. injection volume 511cm³ Mounting plates 860 x 860 mm Dsdpfx Agjyvt Ugjgewb Total weight 12.9 t

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, clamping force: 980 kN, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 100 t Dodpey Ewmxofx Aggewb Note: When purchasing multiple items from the same location (see offers below), you will only be charged the lower costs for dismantling and loading.

Condition: used, Year of construction: 2010, Losma Darwin 2000 D Dust Extraction Systems 5 units with pre-filter, 2 units with turbine only The systems are sold as is, see pictures. Dsdpjzwlvcjfx Aggowb The systems were fully functional until dismantling. The systems are available immediately. The Darwin series is a range of centrifugal dust extractors for cleaning air containing oil-based mists, micro-mists, and vapors that are generated during the use of coolants (emulsions and neat oils). It can be used on all types of machine tools and in all machining processes. The Darwin series uses a double combination of filtration: dynamic (through the rotation of the centrifuge) and static (with the integrated post-filtration system) to guarantee high performance.

Condition: like new (used), Year of construction: 2015, operating hours: 5,609 h, load capacity: 1,600 kg, lifting height: 3,340 mm, fuel type: electric, mast type: duplex, construction height: 2,230 mm, Manufacturer + model: LINDE E 16 - 386 / 02 evo * EX * Proplan 2G / Zone 1 * Mast: 2F3340 ID: 26042.5302 Category: Used Mast: 2F Lowered height: 2230 mm Lifting height: 3340 mm Capacity: 1600 kg Year: 2015 Hours: 5609 hours Capacity: Complete NEW * 48v / 500ah * Manufactured 05/2026 Options: * EX * Proplan !!!!! System / Certificate = INERIS 08 ATEX 3022 X Gas group = IIB Type = Cat 2G (allowed in ZONE 1 and 2) Temperature class = T4 Equipped with: - LINDE control system - Duo pedal !!! - 2 D - FFL mast - Roof window - LOW cabin < 2000 MM !!! Dsdezutu Ijpfx Aggewb

Condition: used, Year of construction: 1997, _Engel ES 1050/200 HL_ Clamping force: 200 t Year of manufacture: 1998 Control system: CC 100 Screw diameter: 45 mm Screw type: GF Min. mold height: 250 mm Max. opening stroke: 700 mm Max. platen distance: 950 mm Ejector stroke: 150 mm Tie-bar spacing (H × V): 820 × 750 mm Dwsdsztadgepfx Aggjb Platen size: 500 × 570 mm Quick clamp: Yes Extras: Software gate separation

Year of construction: 2019, condition: used, For sale: a partial injection molding cell consisting of a hydraulic press, a linear Cartesian robot, and a perimeter safety fence. This system is ideal for those seeking a ready-to-use package for molding and automatically unloading parts. Djdpfx Agjzw H Dbjgewb The package includes only the 3 items listed below: 1. HYDRAULIC INJECTION MOLDING MACHINE Brand and Model: ARBURG ALLROUNDER 520 C 2000-675 Year of manufacture: 1998 Clamping force: 2,000 kN (200 tons) Screw diameter: 50 mm Distance between columns: 520 × 520 mm Platen size: approximately 715 × 715 mm Opening stroke: approximately 650 mm Control: SELOGICA Machine weight: approximately 6,500 kg 2. LINEAR CARTESIAN ROBOT Brand and Model: STAR AUTOMATION XW-1000VI 2V Year of manufacture: 2019 Configuration: 3 servo-assisted linear axes (brushless motors), space-saving telescopic vertical arm. Included: Control cabinet, original operating keyboard (remote control) for programming, and manuals. 3. PERIMETER SAFETY FENCE Manufacturer: Star Automation Europe Features: Modular structure with a metal mesh to protect the work area. Access door equipped with safety microswitches and an interlocked electric lock. Included: External control panel for access requests and emergency chain reset.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 199583, clamping force: 1,800 kN, screw diameter: 35 mm, injection pressure: 1,595 bar, ejector force: 80,000 N, opening stroke: 1,050 mm, TECHNICAL DETAILS Clamping force: 1,800 kN Platen size (H x V): 880 x 830 mm Minimum mold height: 300 mm Maximum opening stroke: 1,050 mm Maximum ejector stroke: 180 mm Ejector force: 80 kN Injection unit Screw diameter: 35 mm Shot volume: 154 cm³ Maximum screw speed: 320 rpm Injection pressure: 1,595 bar Injection rate: 151 cm³/s Nozzle stroke: 500 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,720 x 1,350 x 2,020 mm Net weight (incl. control cabinet): 11.7 t EQUIPMENT Dsdpfxsxuqh Ss Aggjwb ENGEL ecodrive SHV2 (servo-hydraulic drive) Quick-clamping system Core pull control Thermoset package ENGEL Viper 40 robot integrated with RC200-A03 control ROTOFEEDER BMC50 with frequency converter and dedicated programming interface Microcomputer CC200 with 15'' TFT color touchscreen