CNC turning

**Used Colchester Multiturn** 2000 CNC Lathe

Condition: excellent (used), Year of construction: 2006, x-travel 750 mm y-travel 210 mm z-travel 1150 + 100 mm control Fanuc MSX-701III Maximum turning diameter 660 mm Max. turning length 1498 mm Diameter over cross slide max. 400 mm number of spindle speeds 3000 U/min tool piece magazine with 40 Plätzen turret 10 Fach Ibodpfxey Spuue Afhsb total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm

Condition: excellent (used), Year of construction: 2014, operating hours: 68,000 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,200 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 30 m/min, torque: 167 Nm, overall weight: 35,000 kg, Initial commissioning: December 2014 Control system: Fidia X-axis: approx. 2,200 mm Y-axis: approx. 3,500 mm Z-axis: approx. 1,200 mm A-axis: ± 100° C-axis: ± 275° Machine operating hours: approx. 68,000 h Total spindle hours: approx. 26,500 h Clamping table: 2,000 x 3,500 mm with T-slots 2-axis fork milling head Spindle power: 70 kW Spindle speed: max. 15,000 rpm Torque: max. 167 Nm Tool holder: HSK 100A Tool clamping: hydraulic Linear axis drives Feed rate X, Y, and Z axes: up to 50 m/min / 30 m/min Connection data Voltage: 400 V Frequency: 50 Hz Dimensions, weights Required space for machine without peripherals: approx. 8,000 x 6,000 x 5,000 mm Total weight: approx. 35,000 kg Additional equipment - Coolant system - 26-place tool changer - Work area enclosure - Chip conveyor Available at extra charge: - Wireless touch probe Isdeyrc Akepfx Afhobb - BLUM laser Condition of the machine Fully operational, very good condition. Can be inspected under power.

Condition: good (used), Year of construction: 2015, functionality: fully functional, turning length: 650 mm, turning diameter: 400 mm, Fanuc Oi-TD control 3-jaw chuck diameter 250mm Iodpfx Afjvi Haqjhjbb 12-fold revolver tail stock chip conveyor The machine has only 4051 switch-on hours Technische Daten: / technical details Schwingdurchmesser / rotary diameter 650 mm Drehdurchmesser / turning diameter 400 mm Drehlänge / turning length 650 mm X-Weg / X-travel 230 mm Z-Weg / Z-travel 650 mm max. Drehzahl / max. spindle speed 4500 UpM /rpm Anzahl der Revolverplätze / number of tool places 12 Antriebsleistung Spindel / drive capacity spindle 11/15 kW Gewicht ca. / weight ca. 5400 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2012, x-travel 2100 mm y-travel 1020 mm z-travel 762 mm Control Fanuc MXP-200FP spindle speed 6000 U/min spindle capacity ca. 22 kW max. torque on the spindle ca. 550 Nm tool taper SK 50 table surface area 2300 x 1020 mm max. table load 3000 kg T-slots 6 x 22 mm T-slot - distance 150 mm 3-Axis CNC Machining Center Equipment/Accessories: - Automatic tool changer with chain magazine, 40 stations - max. tool-Ø: 120/240 mm - max. tool length: 350 mm - coolant system with internal coolant supply and filter Iedpfx Afjx Sr A Ushobb - emulsion mist extraction - electronic handwheel - 2 pcs. magnetic clamping plates 800 x 400 mm - various tool tapers SK50 - chip conveyor

Condition: excellent (used), Brand: DMTG DALIAN Model: CKE 6180 Z Cnc : FAGOR 8055 iT Turning diameter : 800 mm Turning length: 2.000 mm Center height over bed: 400 mm Face slide travel: 420 mm Longitudinal travel : 1.835 mm Spindle bore: 100 mm Spindle speeds: 40-1000 rpm Isdsu U Htcepfx Afhjbb Feed in X : 0-4000 m/min Feed range Z direction : 0-8000 m/ min Turret : 4 estaciones Chuck diameter 4 jaw: 400 mm Quill stroke: 260 mm Voltage : 400 v Total power requirement: 18,5 kw Machine dimensions : 4.500 x 2.000 x 1.800 mm

Condition: used, Year of construction: 2006, turning diameter Ø30/300mm mm turning length 3055mm +/-0.3mm mm weight of the machine ca. 4-6 t Iodougnxdopfx Afhebb

Condition: new, Year of construction: 2023, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,200 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 610 mm, workpiece weight (max.): 1,200 kg, total height: 24,920 mm, total length: 38,970 mm, total width: 30,700 mm, table length: 1,300 mm, table width: 650 mm, spindle motor power: 11 W, rapid traverse Z-axis: 24 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, spindle nose: Iso 40, spindle speed (max.): 8,000 rpm, spindle speed (min.): 40 rpm, tool diameter: 75 mm, tool length: 250 mm, tool weight: 7 g, Equipment: documentation/manual, rotational speed infinitely variable, NEW vertical machining center "AWEA BM-1200 II" with FANUC 0i-MF Plus CNC Accessories standard: Iederhi Rkopfx Afhsbb 4th axis interface Air blow system Left side auger chip conveyors Coolant through spindle ( CTS ) at 20 bar Coolant gun Fairing bottom washing system 390 liter refrigerant collection tank Automatic power-off system Alarm light & work light

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Heyligenstaedt Heynumill 2700-PF 3/5-axis CNC gantry milling machine with integrated C-axis and interchangeable milling heads. Control: Heidenhain TNC 430 Ijdoyaazmspfx Afhjbb X-axis Y-axis Z-axis 3,000 mm 4,000 mm 1,500 mm In 2018, the Heynumill underwent a complete overhaul of the hydraulic system, replacement of all electrical cables, renewal of the spindle cooling unit, both longitudinal conveyors were replaced, and the milling heads were completely refurbished. The entire refurbishment cost €160,000. In 2020, the milling gearbox was renewed.

Condition: used, Year of construction: 2010, swing dia. 440 mm max. turning diameter 220 mm turning length 450 mm travel -x axis 200 mm Ijdpjvzcplofx Afhjbb control FANUC - 18i TB max. helix angle 60 ° spindle bore 64 mm tool taper VDI 30 numbers of positions in the tool changer 12 CNC Lathe | COLCHESTER - TORNADO T6MS equipped with counter spindle and chip conveyor. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: T6 MS | T6-MS | T 6MS | T-6MS | T-6

Condition: new, Year of construction: 2026, CKT 320 × 750 CNC Lathe is an advanced CNC turning machine designed for precision machining of metal components in medium and large production facilities. Equipped with the Siemens Sinumerik 808D CNC control system and a hydraulic machine configuration, it delivers high productivity, reliability, and excellent machining accuracy. Key Features of the CKT 320 × 750 CNC Lathe The CKT 320 × 750 CNC metal lathe combines precision, flexibility, and durability, meeting the requirements of professional workshops and industrial production environments. As an advanced industrial CNC lathe, it enables complex machining operations such as turning, threading, grooving, and drilling while maintaining excellent component quality. Main Advantages High machining precision – maximum swing over bed of 320 mm, swing over cross slide of 90 mm (optional 135 mm), 51 mm spindle bore, and maximum bar diameter through spindle of 44 mm ensure accurate machining across a wide range of applications. Flexible spindle system – spindle speed range of 100–2500 RPM with an MT5 spindle nose allows machining of various materials, from steel to lightweight alloys. Advanced CNC control – Siemens Sinumerik 808D Advanced with Polish-language interface and Siemens servo drives improves programming efficiency and production performance. Rigid machine construction – net weight of 1040 kg (gross weight 1300 kg) and dimensions of 2370 × 1420 × 2000 mm provide excellent stability when machining workpieces up to 750 mm in length. Efficient tooling system – 4-position turret (optional 6 or 8 positions) with 16 × 16 mm tooling reduces tool change times and improves cycle efficiency. Hydraulic components – hydraulic 3-jaw chuck and hydraulic tailstock ensure fast, precise, and reliable workpiece handling. Long service life and reliability – automatic lubrication system for gears and guideways minimizes wear and extends machine lifetime. Optimized cooling system – protects tools and workpieces, ensuring stable machining conditions and high surface quality. Wide range of applications – suitable for precision turning in mechanical engineering, automotive, and tooling industries. Energy-efficient operation – 5.1 kW (S1) / 3.7 kW motor combines high performance with optimized energy consumption. Customizable configuration – optional features such as Fanuc Oi-TF control, tool probe, and CAD/CAM software integration allow adaptation to specific production requirements. Standard Equipment SIEMENS SINUMERIK 808 Advanced CNC control system with Polish-language interface Siemens servo drives Hydraulic 3-jaw chuck 4-position turret (optional 6 or 8 positions) Complete set of soft jaws Hydraulic tailstock with MT3 center Coolant system Automatic lubrication system for gears and guideways 24V halogen work lighting Technical and operating documentation CE Declaration of Conformity Technical Specifications Specification Value Swing over bed 320 mm Swing over cross slide 90 mm (optional 135 mm) Distance between centers 750 mm Spindle speed range 100–2500 RPM Spindle bore 51 mm Spindle taper MT5 Number of tools 6 Tool size 16 × 16 mm Maximum bar diameter through spindle 44 mm Tailstock taper MT3 Ijdpfxei Apg Uo Afhobb Maximum tailstock travel 100 mm Main motor power 5.1 kW (S1) / 3.7 kW Machine dimensions (L × W × H) 2370 × 1420 × 2000 mm Net / gross weight 1040 / 1300 kg