Used Erlo Upright Drilling Machine for sale (66,107)

Condition: used, Year of construction: 2007, bore capacity in steel (diameter) 40 mm arm length 1050 mm turning speeds 15 - 2800 U/min feed range 0,075 - 0,45 mm/min dimensions 2450 x 1300 x 2300 mm Weight 1500 kg Equipment: Machine in top condition 2026 serviced and repaired by the factory customer service Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60 ? 40 GG 22 ? 50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % ED. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7,5 / 7,5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Dedpfx Asy Nd T Hepbocn Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 3 (X, Y, Z, ) Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides readable from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X,Y,Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphic Graphic display of drilling patterns

Condition: used, Year of construction: 1990, bore capacity in steel (diameter) 32 mm throat 300 mm bore stroke 140 mm taper MK 3 MK table-size 380 x 360 mm Dcodsy N D Hyspfx Apbon feeds über Handrad turning speeds 85 - 1100 U/min total power requirement 1,3 KW weight of the machine ca. 0,27 t dimensions 0,95 x 0,6 x 1,92 m Pillar drill with: - Feed via handwheel - Spindle speeds via belt drive

Condition: new, bore capacity in steel (diameter) 15 / 18 mm throat 180 mm bore stroke 80 mm turning speeds 200 - 4000 U/min 250 x 220 mm distance drilling head - clamping area max. 380 mm total power requirement 1,1 / 400 kW / Volt column diameter 65 mm tool taper MK 2 weight of the machine ca. 0,08 t dimensions 0,4 x 0,5 x 0,9 m Precise table drill: - high accuracy and quality - Drill table adjustable via rack and swiveling around the column Dcsdpfxefg U Tho Apbsn - Full engine protection - Star grip - 230 volt mains connection

Condition: used, Year of construction: 1992, bore capacity in steel (diameter) 32 mm throat 320 mm bore stroke 170 mm 4 speeds 60 - 1600 U/min table-size 570 x 480 mm total power requirement 1,6 kW weight 650 kg dimensions 1200 x 800 x 2200 mm Djdpfx Ajvuz T Nepbscn Features: - Automatic feed - Coolant device - Infinitely variable speed control - Adjustable fixed depth stop - Machine light - Drill chuck

Condition: used, Year of construction: 2011, Technical details: bore capacity in steel (diameter): 35 mm throat: 350 mm bore stroke: 180 mm threading: ST M 24 mm spindle taper MT: MK4 spindle speed:: 50 - 1450 U/min Distance spindle/table max.: 780 mm table clamping surface:: 560 x 560 mm weight of the machine ca.: 500 kg dimension machine approx.LxWxH: 0,73 x 0,56 x 0,22 m Heavy-duty, solid cast-iron construction Automatic gear lubrication via oil pump Dcsdsyli Sfopfx Apbjn Smooth and quiet operation thanks to precision-ground gears running in an oil bath High spindle concentricity thanks to the hardened and ground main spindle Thread-cutting device up to M24 in steel Main switch and motor protection switch Mechanical quill feed, 2 stages: 0.1 / 0.2 mm/rev. Coolant system Adjustable drilling depth stop 18 spindle speeds from 50 to 1,450 rpm 9 selectable speeds via gear selector levers in combination with a two-speed motor *

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 spindle turning speed range 80 - 1440 / 180 -3200 U/min Dsdpsfg U Tpofx Apbecn transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, bore capacity in steel 40 mm threading cutting capacity: M30 Dedpfx Apefg U Tqjbecn throat 310 mm bore stroke 175 mm spindle taper MK 4 feed range - spindle 20 - 400 mm/U spindle turning speed range 60 - 1250 / 120 -2500 U/min transmission ratio 2 Stufen column diameter 120 mm table surface area 550 x 400 mm total power requirement 1,5 / 3,0 kW weight of the machine ca. 0,45 t dimensions of the machine ca. 0,7 x 1,4 x 2,0 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, bore capacity in steel (diameter) 15 / 18 mm throat 180 mm bore stroke 80 mm turning speeds 200 - 4000 U/min 250 x 220 mm distance drilling head - clamping area max. 380 mm total power requirement 1,1 / 400 kW / Volt column diameter 65 mm tool taper MK 2 weight of the machine ca. 0,08 t dimensions 0,4 x 0,5 x 0,9 m precise bench drill: - Large speed range - Programmable thread cutting - high accuracy and quality - Drill table adjustable via rack and swiveling around the column - Full engine protection Dcsdpfxsfg U Tio Apbjn - Star grip - 230 volt mains connection

Condition: used, bore capacity in steel (diameter) 32 mm arm length 1230 mm table surface area 1200 x 500 mm bore stroke 180 mm feed - independent 0,10 - 0,15 - 0,20 - 0,30 mm turning speeds 45 - 1370 U/min taper MK 4 total power requirement 2,7 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,2 x 1,8 x 2,3 m Dcjdpjzwg Rujfx Apbon Quick radial with: - Feed - Thread cutting device

Year of construction: 1972, condition: used, Controls: Heidenhain 2-axis digital readout, without clamping systems or tools, with large table, an on-site inspection is possible. Djdsz Ea R Uopfx Apbecn

Condition: excellent (used), Year of construction: 1999, bore capacity in steel (diameter) 36.0 mm bore capacity in cast iron 45.0 mm throat 300 mm bore stroke 160 mm 4 speeds 120-900 / 240 - 1780 U/min column diameter 145 mm table-size 615 x 460 mm feed 0.1 / 0.2 / 0.3 / 0.4 mm/U total power requirement 1.75 / 2.5 kW weight 440 kg dimensions 1200 x 800 x 2300 mm well-maintained condition (!!) current new price approx. 18.000 Euro special price on request Equipment: - robust pillar drill (V-belt) Dcsdpfx Apey Agpqsbsn - electromagnetic feed clutch = spindle feed * with overload protection and electrical handle cross circuit - mushroom pushbutton (latching) for EMERGENCY STOP, in the front panel - electric stepless speed adjustment - Digital speed display - clockwise rotation of the drill spindle - pole-changing drive motor - Infinitely adjustable drilling depth stop - Work table with 2x T-slots - height-adjustable - Operating instructions in German

Condition: used, Second-hand machine Features and technical specifications: Drilling unit comprising a drilling motor with a holder for threaded drill bits with the option to accommodate 6 drill bits in accordance with the drilling pattern of which 5 are for a row of holes spaced 32 mm apart and 1 is offset to the rear at a distance of 32 mm from the Row of holes, e.g. for Häfele Varianta with roller conveyors to the left and right of the drilling machine Availability: at short notice Dcjdszk N Trspfx Apben Storage location: 63934 Röllbach

Condition: used, Year of construction: 1998, Technical details: Djdpfou Idutox Apbscn bore capacity in steel (diameter): 15 mm bore stroke: 100 mm threading: M16 number of drilling stations: 3 drill spindle - Morse Taper: 3x MK2 spindle throat: 220 mm spindle distance: 335 mm headstock adjustment: (vertikal) 290 manuell mm feed:: mauell mm/U spindle speed:: 220-1600 / 400-3200 / 800-6400 U/min distance between table/spindle: min./max.: 235/525 mm table surface area: 1270 x 315 mm table adjustment: fest / fix mm total power requirement: nicht bekannt kW weight of the machine ca.: 0,72 t dimension machine xH: 1,4 x 0,8 x 2,25 m incl. cooling water system operation by hand and foot The drilling spindles are equipped as follows: 1x drill chuck 13mm 2x quick chuck 10mm *

Condition: good (used), Year of construction: 1991, machine/vehicle number: 139607, Offer 26215 Technical Data: - Drilling capacity 28 mm - Drill spindle mounting MK 3 - Tapping thread M 12 - Drill spindle speeds: - Level 1: 120 / 215 / 360 / 600 / 1080 rpm - Level 2: 240 / 430 / 720 / 1200 / 2150 rpm - Drilling unit with height adjustment via hand crank - Smallest / largest distance between table and drilling/milling spindle: 60 / 390 mm - Drill spindle stroke 100 mm - Fine feed adjustment of the spindle via handwheel - Drill spindle overhang 260 mm - Coordinate table with 3 T-slots: 600 x 240 mm - Table travel: - X-axis: 350 mm Dcodsz Dtxcepfx Apbon - Y-axis: 160 mm - Drive: 400 V / 0.7 / 1.3 kW - Footprint: approx. W 800 x H 1800 x D 900 mm - Weight: approx. 300 kg

Condition: used, Year of construction: 1957, Technical details: Dodpju Id D Uofx Apbocn bore capacity in steel (diameter): 20 mm throat: 220 mm bore stroke: 85 mm Distance spindle/table max.: max. 260 mm range of revolution per miute: Keilriemen U/min spindle taper MT: 2 table surface area: 220 x 280 mm base plate surface area: 225 x 280 mm distance spindle center to floor plate:: max. 380 mm total power requirement: 0,33 kW machine weight ab.: 125 kg dimensions L x W x H: 0,8 x 0,4 x 0,8 m The machine is currently in the technical department. Table rotatable 380 V with connection cable 2500mm *

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Dsdpfjxwaz Hjx Apbjcn

Condition: used, Year of construction: 1997, Workbench Column Drilling Machine CINCINNATI PE 32 Year of construction: 1997 Spindle: CM3 Spindle exit: 150 mm Spindle speed: from 100 to 3800 RPM Table travel X: 290 mm / Travel Y: 150 mm Speed variator by belt variator Maxi height base/spindle nose: 500 mm Mini height base/spindle nose: 260 mm Throat depth: 300 mm Spindle sleeve diameter: Ø 80 mm Equipped with one cross table dimensions: L 430 x W 240 mm Voltage: 380 V Width: 900 mm Dcodpfjz I Dimsx Apbon Depth: 1100 mm Total height on base: 2000 mm Weight: approx 400 kg

Year of construction: 1990, condition: used, Controls: Heidenhain 3-axis digital readout, without clamping systems, tools and large table, with small table, machine makes noticeable operating noises, an on-site inspection is possible. Dcsdpfoz Ea R Iex Apbsn

Condition: new, bore capacity in steel (diameter) 14 /15 mm throat 180 mm bore stroke 70 mm turning speeds 420 - 2100 U/min 250 x 220 mm distance drilling head - clamping area max. 380 mm total power requirement 0,5/1,0 / 400 kW / Volt column diameter 65 mm tool taper MK 2 weight of the machine ca. 0,08 t dimensions 0,4 x 0,5 x 0,9 m Dodpsfg U Tgefx Apbocn Table Drilling Machine with: variable feed Tapping function. depth display Coolant system Belt-drive spindle protection machine light

Condition: good (used), table mounting size: 400 x 1500 mm table movement x: 1130 mm table movement y: 320 mm Dcedpfjg A Inwex Apbjn table movement z: 430 mm spindle taper: ISA 50 spindle turning speed range: Horizontal-/Vertikalspindel 32-1500/25-1200 rpm carriages longitudinal and cross: 15 - 600 mm/min carriages vertical: 6 - 240 mm/min space needed: 4000 x 1250 x 4100 mm weight: 12000 kg

Condition: good (used), Year of construction: 2006, Boring power 35.0 / 40.0 mm bore capacity in cast iron 50.0 mm threading M 30 bore stroke 150 mm Size of table plate 730 x 210 mm Center of spindle to wall or column 280 mm Speed 80.0 - 1.400 U/min distance spindle /table 85 - 755 mm spindle taper MT 4 MK column diameter 120 mm feed 0.1 / 0.2 / 0.3 mm/U voltage 400 V Motor output 1.3 / 2.3 KW weight of the machine ca. 350 kg range L-W-H 800 x 600 x 2020 mm Original price, including accessories: approx. 20.000 euros Special price available upon request Features: Dodpjzl E Ubsfx Apbocn - Heavy-duty, versatile column drill press - Electric table height adjustment - Cross slide 730 x 210 mm ... with digital display - Machined base plate with T-slots - Automatic spindle feed - Fixed drilling depth stop - Stepless speed adjustment - Pole-changing motor - Thread-cutting device - Quick-release drill chuck with tapered shank - User manual (PDF)

Condition: good (used), Year of construction: 1997, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 140 mm morse taper 3 MK table: 415 x 350 mm turning speeds 160 - 2.250 U/min Dcodpfxszl E T Ro Apbjn column diameter 115 mm total power requirement 1.45 / 1.90 kW weight 285 kg range L-W-H 500 x 800 x 1920 mm Features: - Heavy-duty column drill press - Continuously variable speed control (V-belt) - Pole-changing motor - Fixed drilling depth stop - Machine table with 2 T-slots * Height-adjustable via hand crank - Mushroom-head pushbutton (latching) for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation - User manual (PDF)

Condition: good (used), Year of construction: 1979, bore capacity in steel (diameter) 35.0 / 40.0 mm throat 300 mm bore stroke 180 mm turning speeds 110 - 1450 U/min table-size Ø 455 mm column diameter 155 mm feed 0.1 / 0.2 / 0.3 m/min spindle taper MT 4 MK engine output 1.5 kW weight 450 kg range L-W-H 800 x 650 x 1850 mm Features: - Heavy-duty column drill press (V-belt drive) - Automatic spindle feed - Infinitely variable speed control Dedpfjzl E Tkjx Apbscn - Fixed depth stop - Round machine table with T-slots * Height-adjustable via hand crank * Rotatable - Emergency stop button on the front - Coolant system with separate reservoir - Operatorâ??s manual

Condition: new, bore capacity in steel (diameter) 28 mm throat 250 mm bore stroke 130 mm morse taper 3 MK table: 380 x 380 mm turning speeds 75 - 3200 U/min thread M16 ST60 column diameter 98 mm engine output 1,1 kW dimensions 800 x 500 x 2000 mm weight 210 kg - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table Dcjdsprfbuspfx Apbsn - Movable work table - Integrated cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: used, bore capacity in steel (diameter) 20.0 mm bore capacity in cast iron 25.0 mm throat 210 mm bore stroke 100 mm turning speeds 240 - 3800 U/min table-size 300 x 425 mm morse taper MK 3 total power requirement 0.6 / 1.2 kW weight of the machine ca. 300 kg range L-W-H 500 x 700 x 1750 mm Machine from a vocational school (!!) - in checked condition - machine video - ?v=WGhTKBNBT2E Furnishing : Dcodpfx Ajxacbzopbon - Column drilling machine - Drive: V-belt - manual spindle feed - Pole-changing drive motor - Work table with T-slots - Height adjustable via hand crank - adjustable drilling depth stop - Keyless drill chuck including taper mandrel - Connection cable + 16A plug