Used Gannomat Proline 50 for sale (34,742)

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Djdpfx Apey Hkd Hsbjcn Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Automatic Sheet Feeder A-20-P (Pile Table, Mabeg Suction Head, Double Sheet Control, Suction Belt Table) Automatic Laminating Unit EK 102 (Waterbased & Thermal) Seperating Unit TM-102-K: Automatic Sheet Seperator with Quadruple Round Knife Seperating Unit: Quadruple Round Knife, Perforating Device Dcsdpfxozvn Hzs Apbjn Jogging Table (Delivery)

Condition: excellent (used), Year of construction: 1994, tool diameter: 60 mm, spindle mount: MK 5, rotational speed (max.): 1,460 rpm, total width: 1,100 mm, total length: 2,300 mm, total height: 2,400 mm, table width: 580 mm, table length: 1,400 mm, overall weight: 2,700 kg, Arm Length: 1200mm Max. drill Ø cast: 60mm Max. tap Ø: 40M Max. drill Ø steel: 50mm Stroke pinole: 110mm Max. distance spindle - table:1165mm Min. distance spindle - table:300mm Floor / table area: 1400 x 580mm Speeds / ranges: 1460Rpm Spindle Taper: 5ISO/Bt/Mk Length: 2300mm Width: 1100mm Height: 2400mm Weight: 2700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Dodezvfn Nopfx Apbscn

Condition: used, Clyde Denseveyor Model 50/12/6 Denseveyor Features the "dome valve" on the feed inlet and product outlet for optimum performance and reliability. Capacity: 1420 litres Inlet: 300 mm dia Conveying Pipeline: 150 mm (6”) NB Vessel No. 5669/2 Djdpfezvgu Rsx Apbecn Year of Manufacture: 2007 Includes dome valves on inlet, outlet and vent line. Overall height of vessel including isolation valve above inlet: 2960 mm. Dense phase pneumatic conveying of powders and granules. 2 machines available. Also, a 70/12/6 Denseveyor.

Condition: excellent (used), functionality: fully functional, Gear shaper Tos OHA50A v, No. 0440253 Dcsdpfx Aozxnuwopbon In very good condition, rated 9/10.

Condition: used, mileage: 1,065,972 km, power: 220 kW (299.12 HP), first registration: 01/2009, fuel type: diesel, number of seats: 50, gearing type: automatic, next inspection (TÜV): 12/2026, emission class: euro5, color: white, Year of construction: 2009, Equipment: ABS, air conditioning, parking heater,

Condition: good (used), Year of construction: 1991, operating hours: 49,637 h, functionality: fully functional, machine/vehicle number: 9666, ram adjustment: 64 mm, conveyor belt width: 203 mm, pressing force: 50 t, control cabinet length: 940 mm, control cabinet width: 760 mm, stroke length: 1,651 mm, input voltage: 380 V, overall weight: 9,000 kg, control voltage: 24 V, sheet thickness steel (max.): 4 mm, input frequency: 50 Hz, sheet thickness aluminum (max.): 4 mm, Technical Data Manufacturer: BRUDERER AG Model: BSTA 50 EL CNC Machine Type: CNC High-Performance Punching Machine Year of Construction: 1991 Machine Number: 9666 Press Force: 500 kN (50 t) Connected Load: 40 kW Main Motor Power: 25 kW Supply Voltage: 380 V / 50 Hz Control Voltage: 24 V DC Compressed Air Connection: 6–10 bar Operating Hours: approx. 49,637 h Adjustable Stroke: 16–51 mm Mounting Space/Clamping Plate: 760 x 940 mm Main Drive: 22 kW Power Supply: 400 V / 50 Hz Table Area: 940 x 580 mm Strip Feed Height (adjustable): 50–140 mm Max. Strip Width: 203 mm Max. Material Thickness: 4 mm Dimensions of machine with BBV 202: 2390 x 1270 x 3090 mm Machine Weight: approx. 9000 kg Configuration 2 x BRUDERER BBV 202/120 DOUBLE strip feeder KOHLER leveling machine 100.180/2.500.2M, year of construction 1992 Unwinding reel / coil reel Soundproof cabin Conveyor belt for part removal Lifting and sorting device for containers Dcodpfszuur Ujx Apbon Roller conveyors and stacking racks Technical documentation available Description Complete BRUDERER high-performance punching line consisting of a precision punching machine BSTA 50 EL, BRUDERER strip feeder BBV 202/120, KOHLER leveling machine, unwinding reel, soundproof cabin, and discharge and conveying equipment. The system is designed for the efficient processing of strip material in high-speed punching operations. Extensive technical documentation is available.

Condition: used, maximum load weight: 28,180 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 01/2014, loading space volume: 50 m³, Equipment: ABS, Kempf Large Dump Trailer Load volume: 50 m³ 3 axles, air suspension with a lifting axle, BPW axles, aluminum rims, standing platform, roll-up cover, ABS. Payload: 28,180 kg Unladen weight: 6,820 kg Dodjzxvrkopfx Apbecn

Condition: used, Year of construction: 2001, travel -x axis 1800 mm travel -y axis 520 mm travel -z axis 520 mm tool taper SK 40 table load 3 t tool piece magazine with 30 Plätze spindle drive 22 kW max. torque on the spindle 220 Nm *Machine in very good condition* + Loading door windows have been replaced + Linear guide carriages on X and Y axes have been replaced - Heidenhain iTNC 426-M control system - Partition wall for pendulum operation - Chip conveyor - Filter system - Spindle up to 8000 rpm - Rapid traverse x/y/z: 30/30/30 m/min Djdpfxovh R Txs Apbjcn - Year of manufacture 2001 Control on: 93212:52:14 Machine on: 82284:39:36 Program run: 42385:36:11

Condition: new, I - beam section - flat steel 100 x 15 (d 450) mm I-beam section - upend 60 x 10 (d 500) mm L-beam 50 x 6 (d 1000) mm round material 35.0 (d 600) mm bar material dia. max. 70 x 2 (d 1000) mm square material 50 x 50 x 3 mm bending speed 4.5 m/min roll diam. toproll 155 mm bore 50.0 mm total power requirement 1.5 kW weight 400 kg range L-W-H 990 x 750 x 1350 mm Dcjdpjzx Hd Refx Apben Equipment: - robust electro-motorized ring/profile bending machine - machine base frame, with rear shelf - horizontal and vertical work possible - 1x freely movable foot switch - segmented standard rollers (divided) - 2x motor-driven rollers - manual delivery of the top roller - analog position display of the top rollers (scale) - manually adjustable side/straightening rollers - CE mark / declaration of conformity - operating instructions in German

Condition: new, bore capacity in steel (diameter) 60.0 mm threading M 42 throat 350 mm bore stroke 200 mm turning speeds 60 - 1530 U/min table: 720 x 510 mm bore spindles - Morse Taper 4 Kurzspindel MK column diameter 200 mm feed 0.15-0.2-0.3-0.36 mm/U distance spindle /table 159 / 884 mm engine output 3.6 / 4.3 kW Dodpfx Aexabgiopbscn weight 605 kg Machine height 1950 mm Furnishing : - automatic feed with electromagn. Feed clutch - 4 feed levels 0.15 / 02, - 0.3 - 0.36 mm / rev - stepless speed adjustment - digital speed display - Feed overload protection - Spindle protection with electr. validation - digital speed display - machined base plate including special equipment: - Coolant device mounted in the foot pos. 24. - Thread cutting device pos. 20.0 - LED machine light pos. 12.

Condition: new, pressure 50.0 t stroke 200 mm table surface area 730 x 205 mm dayligth 75 - 1050 mm column travel between the guideways 730 mm weight of the machine ca. 292 kg Dcodpfxoxaa Ixe Apbon range L-W-H 1040 x 800 x 1880 mm Description : - Standard with cable winch - for easy height adjustment of the support table - Piston delivery either manually or pneumatically - Powerful workshop presses for craft and repair businesses - Optimum price-performance ratio thanks to rational design - The standard foot pedal keeps your hands free for the workpiece - Increased range of application thanks to the optionally . available pressure mandrel set (10 pieces). - Pressure cylinder with integrated return spring for piston return - Welded steel frame for heavy use and high stability - Versatile in use thanks to the pressure cylinder that can . be moved to the left and right

Condition: new, Year of construction: 2025, Complete compact vertical packaging system including volumetric dosing unit, 1 cup, single bucket conveyor and outfeed conveyor. Suitable for granulate-type products such as sugar, rice, beans, nuts, etc. The vertical packaging machine (VFFS) is equipped with PLC (control via color touchscreen user interface, different languages available e.g. English, German, etc.), date printer, automatic program set-up, mark sensor registration control, quick change former assembly, pneumatic sealing unit, servo motor film pulling, double pulling possible, air exhausting device, supporting device of finished bags, hole punching device, suitable for OPP and PE film (possibly additional costs for the PE unit). - Specifications of VFFS packaging machine: filling range: up to 3000ml; film width: max. 520mm; bag size (mm): min.-max. L(80-400)xW(80-250); max. speed of the machine in neutral: 50 cycles/min; stainless steel 304; 220V, 4kW; 6bar, 0.4m³/min; packaging machine dimensions LxWxH: approx. 1150x1790x1650mm; machine weight: 600kg. Capacity of dosing hopper is up to 50l. Single bucket conveyor has a material capacity up to 50l. The container is filled manually in the bottom position. In the top position it will be emptied automatically (complete cycle: 1 minute). - Specifications: height: 3-5m; 220V, 1kW; stainless steel; dimensions: L1400xW700xH3500mm. Generally it has to be customized to meet individual customer/product requirements. Therefore deviations of shown specifications are possible. The outfeed conveyor has a stainless steel 304 frame. - Specifications: conveying speed 30m/min; 220V, 0.55kW; conveyor dimensions LxWxH: approx. 1850x550x1230mm; weight: 80kg. Total dimensions of complete system approximately L1150xW5040xH3500mm, depending on final layout. Generally the system has to be customized to meet individual customer/product requirements. Therefore deviations of shown specifications of modules and machines are possible. Main components: Color touchscreen SIEMENS, PLC controller SIEMENS, servo motor SIEMENS, cylinder AIRTAC, solenoid valve AIRTAC, relay OMRON, film pulling motor SIEMENS. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Dedpfx Apev Nmkcebocn Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Complete dosing and packaging system for liquids including tank, liquid pump and outfeed conveyor. Suitable for viscous and non-viscous liquids such as cosmetic cream, tooth paste, skin lotion, shampoo, mayonnaise, ketchup, honey, fruit jam, edible oil, vinegar, juice, milk etc. The vertical packaging machine (VFFS) is equipped with PLC (control via color touchscreen user interface, different languages available e.g. English, German, etc.), date printer, automatic program set-up, mark sensor registration control, quick change former assembly, pneumatic sealing unit, servo motor film pulling, double pulling possible, air exhausting device, supporting device of finished bags, hole punching device, suitable for PE film (possibly additional costs for the PE unit). - Specifications of VFFS packaging machine: filling range: 150-1200ml; film width: max. 420mm; bag size (mm): min.-max. L(60-300)xW(60-200); max. speed of the machine in neutral: 50 cycles/min; stainless steel 304; 220V, 2.2kW; 6bar, 0.3m³/min; packaging machine dimensions LxWxH: approx. 1080x1300x1400mm; machine weight: 500kg. - Specifications of tank and liquid pump: Tank capacity approx. 50l (individual customizing possible); height: approx. 70mm; liquid pump is in different versions available such as: 10~150ml, 150~500ml, 500ml~1L, 1L~2L, 2L~5L etc. The pump system can be customized to meet individual customer/product requirements (possibly additional costs), dimensions of tank and pump depends on it. The outfeed conveyor has a stainless steel 304 frame. - Specifications: conveying speed: 30m/min; 220V, 0.55kW; conveyor dimensions LxWxH: approx. 1850x550x1230mm; weight: 80kg. Total dimensions of complete system approximately L1080xW3150xH1470mm, depending on final layout. Generally the system has to be customized to meet individual customer/product requirements. Therefore deviations of shown specifications of modules and machines are possible. Main components: Color touchscreen SIEMENS, PLC controller SIEMENS, servo motor SIEMENS, cylinder AIRTAC, solenoid valve AIRTAC, relay OMRON, film pulling motor SIEMENS. Dedpfx Asv Nmk Nopbjcn That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, machine/vehicle number: 85163, machine: new piston hydraulic membrane pump type: Abel HMD-G-50-500 Flow rate: max. 50 m³/h Discharge pressure: 15 bar Motor: 30 KW, 400 V, 50 Hz, 1500 rpm, - with blower : Dcsdpfxjd Ey I Ee Apben The pump is controlled via frequencly converter.:

Condition: new, machine/vehicle number: 85163, Attachment: Electro-hydraulic piston diaphragm pump (feed pump / filling pump) NEW! Type: Abel HMD-G-50-500 Identification No.: 85163 Flow rate: 50 m3/h Motor power: 30 kW Motor speed: 1465 rpm Piston diameter: 200 mm Suction side connection flange: DN 125 PN 16 DIN 2633 Pressure side connection flange: DN 100 PN 40 DIN 2635 Application: Filter press feeding Suction flow stabilizer: including vacuum breaker 0.5 bar Air feed valve: on the suction and pressure sides, including pressure reducer, solenoid valve, check and throttling valves Other accessories: such as drain valve, pressure gauge, etc. Photo: similar design Djdpfjd Ey Rgox Apbjcn The Abel hydraulic diaphragm simplex piston pump in horizontal design is double-acting, slow-running, self-priming, and dry-run safe. The pump's flow rate is energy-efficiently controlled by a speed-controlled drive, depending on the delivery pressure, using a frequency converter. We also offer our piston diaphragm high-pressure pumps in a special design for tunnel construction. Do you have special requirements? Please ask us.

Condition: used, mileage: 638,000 km, power: 355 kW (482.67 HP), first registration: 03/2023, fuel type: diesel, overall weight: 28,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2027, color: white, gearing type: automatic, emission class: euro6, total length: 11,100 mm, total width: 2,600 mm, total height: 4,000 mm, loading space length: 8,150 mm, loading space width: 2,500 mm, loading space height: 2,750 mm, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, tail-lift, Information in English: DAF XG 480 FAR 6X2 50 CC COMBI TRS COOLING 2x VALVES CAMERAS EXCELLENT CONDITION Superstructure: Refrigerated/Freezer, Ebo Rhoon Tail lift: 2,000 kg Dhollandia under-mount tail lift Refrigeration: TRS Carrier Iceland, Electric, temperatures from -30 to +30 Date of first registration: 2026 APK (roadworthiness test): Mileage: 638,000 km Engine power: 355 kW (483 hp) 13 liters Transmission: AS-Tronic Wheelbase: 670 cm (axle 1 to 3), 530 cm (axle 1 to axle 2) Cargo box dimensions (lxbxh): 815 x 250 x 275 cm internal Truck dimensions (lxbxh): 1110 x 260 x 400 cm external Unladen weight: 13.9 kg Payload: 14,107 kg GVW (Gross Vehicle Weight): 28,000 kg Max. weight on front axle: 9,000 kg GCW (Gross Combination Weight): 50,000 kg Color: H3279 Emission standard: Euro 6 E Suspension: Front parabolic, rear air Axle configuration: 6X2 Front tires: 385/65 R22.5 L90% R90% Michelin Tires on axle 2: 295/80 R22.5 L70% R70% Michelin Tires on axle 3: 385/65 R22.5 L30% R30% Michelin Cab type: XG Extras: MX Engine Brake, Motor PTO, Air conditioning with climate control, Auxiliary air conditioning, Auxiliary heater, 9-ton front axle, Refrigerator, Luxury radio, 2x air-suspended seats, 2 beds, 2x 600-liter tanks, 130-liter AdBlue tank, Last axle is a lift axle (no steering axle), Predictive Cruise Control, Alarm B3, Wheelbase is 530 (axle 1 to axle 2), Rear overhang of 2.90 m, Side view camera, Rear view camera on the rear of the cargo box, Connection for camera on the trailer, 45-degree cooling, Fully insulated superstructure built by Ebo Rhoon, 5x rails against the ceiling and in the floor, 1x horizontal load-lock rail, Stainless steel bumper in the box, LED lighting in the box, TRS Iceland cooling with EcoDrive and start-stop, 2,000 kg Dhollandia under-mount tail lift, Pneumatic fifth wheel coupling, Light and air connections, Immediately available and ready for use, Truck has always had a maintenance contract with DAF dealer Blom Katwijk, Complete maintenance history available, etc., etc. Can be supplied in combination with: DRACO TRAILER EBO RHOON BODY TRS COOLING TAIL LIFT 24 CC Superstructure: Refrigerated/Freezer Martini EBO Rhoon Make and type of chassis: Draco MZS 218 Refrigeration: TRS Carrier Iceland incl. EcoDrive and start-stop system Date of first registration: 11-2022 APK (roadworthiness test): 11-2026 Dimensions (lxbxh): 760 x 250 x 290 cm internal Djdjzr Dflepfx Apbocn Adjustable length of the triangle: 40 cm Unladen weight: 6,930 kg Payload: 11,070 kg GVW (Gross Vehicle Weight): 18,000 kg Suspension: Air suspension Types of axles: SAF axles with disc brakes Tail lift: Dhollandia 2,000 kg under-mount tail lift Tire size: 445/45 R19.5 Axle 1: L80% R80% Axle 2: L80% R80% Spare wheel for trailer: 100% Extras: Adjustable length triangle (40 cm), Dhollandia 2-ton tail lift, ABS, EBS, SAF axles with disc brakes, Chassis with crossmember reinforcement, Wheel chocks, Fully insulated EBO Rhoon, 5x stainless steel rails in floor and ceiling, 1x Horizontal securing rail in the side walls, TRS Iceland cooling with EcoDrive and start-stop system, temperatures from -30 to +30 (runs on 380V or on the truck's cooling system), Nice flat evaporator, Various LED reversing lights, Ferry-compatible, Immediately available and ready for use, Suitable for 24 CC, 14 pallet spaces Further information: * Payload: 14107 kg * Type | First axle: Michelin R * Tire size | First axle: 385/65 R22.5 * Tire tread depth inside left | First axle: 90% * Tire tread depth

Condition: new, Year of construction: 2026, machine/vehicle number: 20260303017, fuel type: diesel, motor manufacturer: Perkins 1103A-33TG1, General information Dsdpfxsyxkv Hj Apbecn Field of application: Construction Weights Empty weight: 1.055 kg Functional Generator capacity: 50 kVA Dimensions of cargo space: 228 x 95 x 125 cm CE mark: yes Other information Fuel consumption: 8.2 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A42F Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 87 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: excellent (used), Year of construction: 2021, Mileage: 2.021 km Drive: Wheel Empty weight: 408 kg Dimensions of cargo space: 310 x 150 x 195 cm Technical condition: very good Visual appearance: very good Production country: NL Please contact Vink Machinery for more information Frisian Motors Leffert FM-50 * 2021 * Lithium battery drive * 1833 km * Dutch license plate * 3 speeds * Top speed 50 km/h Dcodpfx Apex I Rawsben * Glass windshield with wiper * Polycarbonate rear window * Tow bar * Built-in charger

Condition: like new (used), Year of construction: 2020, operating hours: 1,670 h, load capacity: 5,000 kg, lifting height: 300 mm, fuel type: electric, Manufacturer + model: LINDE P 50 Tow tractor - 1F Djdpezuug Sjfx Apbecn ID: 26060.6269 Category: Used Mast: 1F300 Lifting height: 300 mm Capacity: 5000 kg Year: 2020 Operating hours: 1670 hours Battery: 24 V /

Condition: used, Year of construction: 2014, Used Machine Year of Manufacture: 2014 Dodpfxjzlbp Uo Apbocn Features and Technical Specifications: - X-axis working range: 3,740 mm - Y-axis working range: 1,570 mm - Z-axis travel: 350 mm - 4th axis: available - 5th axis: 5-axis spindle, 12 kW motor - with additional locking mechanism for the C-axis - Tool change stations: 24 with turret changer; 10 on the left side of the machine column - Vertical drilling spindles: 12 - Machine table: cantilever table - Automatic table positioning: available - 6 e-motion workpiece supports - Special workpiece clamping system for frames - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 machining areas for alternating setup - With automatic central lubrication - With mobile control console featuring a PC monitor - With air conditioning for the control cabinet - With a 90 m³/h vacuum pump - With handheld control unit - Includes: 12 frame clamps, 8 large and 4 medium suction cups

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 725 h, load capacity: 5,000 kg, lifting height: 4,030 mm, free lift: 1,230 mm, fuel type: electric, mast type: triplex, construction height: 2,250 mm, fork length: 2,000 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Automatic Condition: As new Technical condition: very good Front tire type: Non-marking Front tire condition: New Rear tire type: Non-marking Rear tire condition: New Battery voltage: 80V Battery capacity: 930Ah Battery type: PzS Battery year of manufacture: 2016 Description: Price includes a new UVV inspection, 4x SE non-marking tires NEW, lighting according to STVZO, paintwork in as-new condition (original), the 2016 battery will be regenerated with a power cycler including Kappa test (a new or recently refurbished battery can be purchased for an extra charge), charger included with plug, ex-rental unit from Still Germany. We will gladly arrange cost-effective transport for you. A lease-purchase option is generally possible. We are an official Jungheinrich partner. Dsdpfx Aszwacwspbecn Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, STVZO compliance, full cabin, full free lift, CE certificate, scale, rotating beacon, Mini lever, Bluespot

Condition: used, mileage: 9,298 km, power: 100 kW (135.96 HP), first registration: 01/2025, fuel type: electric, color: grey, gearing type: automatic, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Standard equipment: Driver-side airbag Drive type: Front-wheel drive Audio controls on the steering wheel Audio system BT (Bluetooth/USB interface) Bluetooth hands-free system Electric vehicle Electric motor 100 kW (continuous 57 kW) Electronic stability program (ESP) Dcodpfx Apjzyxdlobsn Driving assistance system: Hill start assist (HSA) Speed control system (cruise control) Transmission for electric vehicle Rear wing doors without glazing Body/superstructure: Box van Charging cable with Schuko plug (Mode 2) On-board charger (11 kW) Wheel hub covers Wheelbase 2785 mm Halogen headlights Sliding door, right Central locking with remote control Optional equipment: Electrically operated front windows with anti-pinch protection Electrically adjustable and heated exterior mirrors, electrically foldable Luggage compartment lighting (LED) Inductive charging cradle for smartphone (wireless charging) 2-zone automatic climate control Visibility package, driving assistance system: High beam assist, windshield wipers with rain sensor, large info display, vehicle key (2), both foldable Charging cable with Type 2 connector (Mode 3) Load compartment partition with window Metallic/mineral effect paint Fog lights Opel Connect Rear parking pilot system Tire pressure monitoring system Keyless Open locking/starting system Airbag driver/passenger side We create our advertisements carefully and conscientiously. Nevertheless, we ask for your understanding that we cannot guarantee or be liable for any errors in the advertisement. Changes, prior sale and errors are subject to change!

Condition: used, Year of construction: 2025, load capacity: 5,000 kg, lifting height: 5,530 mm, total length: 6,000 mm, Bedienertyp Sitzen · Max. Tragkraft 5000 kg · Lastschwerpunkt 600 mm · Lastabstand, Mitte der Antriebsachse bis zur Gabel 773 mm · Vorderachslast (beladen) / Hinterachslast (beladen) 11520 kg / 1805 kg · Vorderachslast ohne Last / Hinterachslast ohne Last 3285 kg / 5040 kg · Bereifung Pneumatisch · Anzahl der Vorderräder / Hinterräder 2 / 2 · Anzahl der Antriebsräder 4 · Vorderspur 1620 mm · Abstand zwischen den Hinterrädern 1740 mm · Höhe Schutzdach (Kabine) / Gesamthöhe mit niedrigem Fahrerschutzdach (Buggie-Ausführung) 2486 mm / 2486 mm · Sitzhöhe 1455 mm · Gabelträger DIN 15173 A/B 4A Dedpoy E Uhmsfx Apbjcn · Gangbreite für Palette 1000 x 1200 quer 6812 mm · Gangbreite für Palette 800 x 1200 längs 6812 mm · Wenderadius 4640 mm · Fahrgeschwindigkeit (beladen / unbeladen) 10 km/h / 22 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.40 m/s / 0.40 m/s · Absenkgeschwindigkeit (beladen / unbeladen) 0.50 m/s / 0.40 m/s · Festellbremse Hydraulik · Nennleistung Verbrennungsmotor 55 kW · Hersteller / Motor Modell / Motornorm Deutz / TCD 2,9 / Stage V · Nenndrehzahl 2300 rpm · Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 2925 cm³ · Arbeitsdruck Zusatzsteuerkreis für Anbaugeräte 230 bar · Ölmenge für Anbaugerät 97 l/min · Geräuschpegel am Ohr des Fahrers gemäß DIN 12 053: 78 dB

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 6,233 h, load capacity: 5,000 kg, lifting height: 5,450 mm, free lift: 560 mm, fuel type: diesel, mast type: simplex, construction height: 3,550 mm, power: 65 kW (88.38 HP), fork carriage width: 1,300 mm, fork length: 1,400 mm, empty load weight: 8,300 kg, total length: 4,480 mm, drive type: Diesel, construction width: 2,150 mm, Side loader Load center: 500 Fork width: 150 mm Fork thickness: 60 mm ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Standard Transmission: Torque converter Speed class: 20 Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 300-15 Rear tire type: Superelastic Dodpfxszz Dv Ne Apbjcn Rear tire size: 300-15 Description: Operating hours recorded. Inspection possible by appointment. Transport options available. For further questions, please call. Rear work lights, front work lights, roof protection, windshield, half cab, heater, full cab, rotating beacon, windshield wiper, seat.