Used Gf Agie Charmilles Wire Eroding Machine for sale (67,714)

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, TEUREMA EHS-110 WIRE DRAWING LINE Year of manufacture: 1999 Maximum speed: 10 m/s Total installed power: 230 kW TEUREMA EHS-110 wire drawing line with robust construction, equipped with a Tecno Impianti drawing bench and prepared for industrial use. The machine has undergone a complete electrical modernization, including a new main electrical panel, Siemens S7-1500 PLC, Siemens 1200 HMI screen, 100% new wiring, and new push-button stations, which significantly improves the reliability, maintenance, and operability of the unit. LINE COMPOSITION Coil stands - 2 tilting winders - Maximum capacity per winder: 3,000 kg Vertical winding tower - 6-meter tower - Lifting and lowering carriage with a hoist Mechanical decaling unit Soaping unit - Motor: 1.5 kW - Speed: 1,500 rpm TECNO IMPIANTI DRAWING BENCH - Number of steps: 2 - Two-ring coil: - 1st ring: Ø 610 mm - 2nd ring: Ø 760 mm - 3-speed gearbox: - 3.90 m/s - 7.20 m/s - 10.00 m/s - Power: 160 kW - Frequency: 50 Hz Horizontal coiler - Horizontal drive - Maximum coil capacity: 3,000 kg - 2-speed gearbox: - 7.3 m/s - 10.0 m/s - Maximum coil diameter: Ø 1,200 mm - Core diameter: Ø 600 mm - Usable width: 900 mm - Power: 45 kW TECHNICAL DATA - Inlet diameter: 5.5 to 14 mm - Outlet diameter: 4 to 12 mm - Number of blocks: 1 vertical - Maximum line speed: 10 m/s - 2 CL30 A 33 Eurolls cassettes - Rollers: Ø 150 x Ø 90 x 15/20 mm - Total machine power: 230 kW - Frequency: 50/60 Hz ELECTRICAL AND AUTOMATION UPGRADE Gjdpfxezycaks Aayjbt - Completely new main electrical panel - Siemens S7-1500 PLC - Siemens HMI 1200 screen - 100% new wiring - New push-button stations - New programming AVAILABLE SERVICES Possibility of supply with: - installation - assembly - commissioning - technical assistance - adaptation according to customer needs

Condition: used, Drahtheftmaschine - Wire Stitching Machine Polygraph 103Serial-No. 6875 Manuals Included Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Godpeh Ax Ufsfx Aayobt

Condition: used, Year of construction: 1992, machine/vehicle number: 190121, Wire Stitching Machine AGRAFIX BX1-head wire stitcher for block- and saddle stapling. Year 1992 - Serial-No. 190121 Online-Video-Inspection by Skype-Video Gbedpfxsh Ayf Tj Aayet We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1991, machine/vehicle number: 91040170, 2 Head Wire Stitching Machine Hohner ACCORD 25/402-head wire stitcher for block- and saddle stapling Year 1991 - Serial-No. 91.040.170 Online-Video-Inspection by Skype-Video Gbjdjn Apntepfx Aayst We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 8170126, Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Polygraph 781Kartonagenhefter / Carton Stitcher Typ / Model 781/1L75FR Serial-No. 8170126 Armlänge / Arm length 75cm Gedpfxjiiilqs Aaysbt Fußpedal / Foot pedal Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Wire Stitching Machine Polygraph 703/1T Drahtheftmaschine / Wire Stitching Machine Polygraph 703/1T 1-head wire stitcher for block- and saddle stapling. Year - Serial-No. 21/4 Gjdpfxjyywzxs Aayobt Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Block- und Broschüren-Drahtheftmaschine Gbodpfx Aajzkwa Hjyjt Pad and Booklet Wire Stitching machine Drahtheftmaschine / Wire Stitching Machine AGRAFIX BX Serial-No. 1268 1 Drahtheftmaschine für Block- und Sattelheftung. 1-head wire stitcher for block- and saddle stapling. Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Polygraph 781/1L50 FR Serial-No. 1793 Gsdoxvdmdjpfx Aayobt Heftdicke / Staple thickness 0-8mm Heftarmlänge / Staple Arm length 50cm Heftarmbreite vorn / Handle width at the front 10mm Klammerrückenlänge innen / Bracket Back Length Inside 12mm Heftdraht Runddraht Nr. 21 - 23 / Flachdraht II - IV Staple Wire Round Wire No. 21 - 23 / Flat Wire II - IV Heftgeschwindigkeit 250 Klammern pro min / Stapling Speed 250 staples/min Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2003, condition: good (used), functionality: fully functional, machine/vehicle number: 03234, 6 Brush ( 3 pairs) descaling machine for steel wire size 5.5mm - 16.0 mm max (low carbon) Brush pairs arranged in a 60 degree offset for maximum effect. A very clean looking machine. Gbjdox R Uzdepfx Aayst On site viewing and inspection recommended

Condition: used, Mitsubishi Wire EDM Machine, Spark Erosion Machine, Mitsubishi DWC 150 SZ, Used Machine Manufacturer: Mitsubishi Type: DWC 150 SZ Year of Manufacture: 1994 Overall Dimensions (Main Unit): Width: 1860 mm Depth: 2050 mm Height: 2400 mm Electrical Data: 400V; 21.5A Weight: 3500 kg Water Tank Size: 750 x 780 mm Electrical Cabinet Dimensions: Width: 1150 mm Depth: 2700 mm Height: 1050 mm Wire Feeder Unit Dimensions: Width: 320 mm Depth: 580 mm Height: 1380 mm Godpfx Ajyxfqrjayjbt Transformer Dimensions: Width: 510 mm Depth: 590 mm Height: 640 mm Water Treatment System Dimensions: Width: 1320 mm Depth: 1460 mm Height: 1360 mm Condition: Untested, sold in "as-is" condition. The machine is available for sale with the accessories and in the aesthetic condition shown in the photos.

Condition: like new (used), Year of construction: 2008, operating hours: 1,120 h, Controller ARISTECH (similar as FANUC) Number of axes: 4 Gjdpfx Aajvvl Uaeyjbt Table size 640 x 470 mm X Axis Travel 425 mm Y Axis Travel 300 mm Z Axis Travel 250 mm Max workpiece size 800 x 600 x 250 mm U Axis Available:standard Weight cca 3000 kg Dimensions LxWxH = 1860 x 2050 x 2100 mm The machine consist of following units 1. EDM machine 2. Controller cabinet 3. Water tank and pump 4. Water cooler 5. Transformer 6. Transformer Nr.2 (power supply) The machine was barelly used. Still unter power. It will be due to company liquidation.

Condition: used, Roll guiding device WITELS-ALBERT Berlin, type ER 7 Guiding roller width: 30 mm Guiding roller diameter: 30 mm Belt cross-section: approx. 1.5 x 10 mm or 0.5 x 25 mm - Individual adjustment for the 3 upper guiding rollers via wing nut and lock nut - Quick-release mechanism via eccentric lever for the 4 lower guiding rollers - 2 pre-forming guiding rollers, Ø 32 x 13 mm, mounted with a 90° offset - For guiding strip steel, last used for a belt cross-section of approx. 1.5 x 10 mm Gbodpezczvdefx Aayjt Space required L x W x H: 250 x 100 x 150 mm Weight: 5 kg Good condition

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 101D1902, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, workpiece height (max.): 300 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 775 mm, Equipment: documentation/manual, We are selling a wire erosion machine. Condition: used, fully functional Technical specifications: Manufacturer: FANUC Model: Alpha 1iD CNC control: FANUC 310i-WA Operation: Touchscreen; Editor Manual control panel: yes Travel ranges: X 600 mm × Y 400 mm × Z 310 mm U/V axes: ±100 mm (total travel of 200 mm) Wire diameter: 0.10–0.30 mm Max. workpiece size: approx. 1,050 × 775 × 300 mm Automatic wire threading (AWT) Machining under water; full immersion machine Ethernet and USB connection The FANUC Alpha 1iD offers reliability, very good cutting quality, and low maintenance requirements. High-quality clamping devices, Hirschmann System 4000, can also be included. Gbjdezlg Agspfx Aayet The machine can be inspected and tested by appointment. If you have any questions or are interested, please do not hesitate to contact us.

Condition: good (used), Year of construction: 1997, High-speed EDM drilling machine, KOTON Type: EDM-KTH-202A.. In good condition with cooling and filter unit. Machine documentation available. See data sheet for specifications. Godpfx Aaowmn Szsyjbt

Condition: excellent (used), Year of construction: 2004, WIRE BELT BLAST MACHINE MANUFACTURER: RÖSLER WIRE BELT BLAST MACHINE BRAND: RÖSLER Manufacturer: Rösler Type: RDGE 800-4 Year of manufacture: 2004 Passage width: 800mm Passage height: 550mm Spinning wheel: 4 pieces with frequency converter, Filter system: wet filter system With several inlet and outlet belts. Incl., control cabinet, complete documentation, etc. TOP condition! System is dismantled! WIRE BELT BLAST MACHINE BRAND : RÖSLER Brand: Rösler Type: RDGE 800-4 Year: 2004 Belt Width : 800mm Inlethigh: 550mm Turbine: 4 Pieces with Drivers Filter: Wet Filter With many inlet- and outlet transport belt Incld. Main Panel, complete Doku Very good condition! Machine it s now desmantly Price: Loading on Truck Price: Loading on Truck Warranty: 6-month function and warranty guarantee when commissioned by DECK Sarl. Gjdpfxsv Idf Ij Aayobt Spare parts supply for the next 10 years Warranty: 6-month Functions- and warranty from DECK Sarl. When DECK Sarl. make the assembly OPTIONAL: Delivery to your factory: Assembly / commissioning / training Assembly by foreman We also offer spare parts for Rösler, Schlick, Wheelabrator, Gietart etc. blasting machines! We can offert for spare parts for Rösler, Shot Blasting Machines!

Condition: excellent (used), For sale is a professional wire cutting machine, the AAT Microfil, from the renowned German manufacturer Aston Abisolier Technik GmbH, Nuremberg. This device is designed for precise cutting of wires and cables to a specified length. Thanks to its adjustable feed speed and piece counter, it is ideal for use in electrical workshops, production facilities, and for the manufacture of cable harnesses. The manufacturer has specialized in wire processing equipment for many years. Technical data: Manufacturer: Aston Abisolier Technik GmbH (AAT) Model: Microfil Country of manufacture: Germany Power supply: 220 V / 50 Hz Motor power: 90 W Drive with stepless speed control (Minidrive) Speed range: approx. 15–135 rpm Cutting length adjustment Length adjustment range on the panel: approx. 40–7200 mm Cut counter Stable, metal construction Applications: cutting electrical wires, cutting single- and multi-strand cables, preparing wires for further processing, cable harness production, electrical and electronics workshops. Condition: Used device, in good visual condition. It has normal signs of wear resulting from use. When connected to the power supply, the indicator light illuminates, and the machine starts. Sold in the exact condition as shown in the photos. Gbsdpfx Ajzkb T Roayot Included in the set: AAT Microfil machine, power cord.

Condition: new, Year of construction: 2026, functionality: fully functional, operating pressure: 6 bar, inner dimension width: 600 mm, inner dimension height: 400 mm, volume flow: 10,500 m³/h, Equipment: documentation/manual, New Wire Mesh Belt Shot Blasting Machine RB-600 AH 4 Description: The RB-600 AH 4 wire mesh belt shot blasting machine from ABRAZIV Kft. is designed for the economical and continuous surface treatment of small to medium-sized workpieces. The machine is suitable for descaling, derusting, cleaning, and surface preparation of aluminum and steel castings, forgings, and workpieces that cannot be shot blasted in bulk. The machine is manufactured to order and can be configured individually according to customer requirements. The RB-600 AH 4 is equipped with four ABR-380 shot blasting turbines. Two turbines are located above and two below the wire mesh conveyor belt. This arrangement ensures optimal coverage of the cross-section and a uniform blasting result. The turbines operate at an angle of approximately 70° to the direction of travel and have eight blasting blades and a pre-accelerator. The active blasting area is lined with highly wear-resistant manganese steel. Other internal areas are protected by wear-resistant, noise-reducing rubber. The wire mesh belt is made of highly wear-resistant spring steel. A closed blasting media circuit with a screw conveyor, bucket elevator, blasting media cleaning system, and dosing system ensures reliable operation. Three-layer rubber curtains reduce blasting media leakage. An adjustable high-pressure blow-off system cleans the workpieces after the blasting process. The extraction and filter system with cartridge filters achieves a dust emission of max. 3 mg/m³. Technical Data Passage Passage width: 600 mm Max. workpiece height: 400 mm Min. workpiece length: approx. 1,000 mm Gbodpfxozkivts Aayet Shot Blasting Turbines Number: 4 Type: ABR-380 Turbine diameter: 380 mm Speed: 2,800 1/min Blasting media output per turbine: 120 kg/min Wire Mesh Conveyor Belt Load capacity: 500 kg/m Speed: 0–4 m/min Power Consumption Base machine: 45.5 kW Cartridge filter: 7.5 kW Compressed air: min. 6 bar Compressed air consumption filter: 12.5 m³/h Other Data Blasting media capacity: approx. 1,000 kg Blasting media grain size: 0.4–1.2 mm Extraction capacity: 10,500 m³/h Filter area: 252 m² Dust emission: max. 3 mg/m³ Electrical Data Mains voltage: 3 × 400 V Control voltage: 220 V Frequency: 50 Hz Optional accessories available Magnetic drum separator Frequency converter Automatic blasting media dosing Special paint finish Transport Assembly Commissioning Operator training Spare parts supply Maintenance and service Applications Aluminum and steel castings Forgings Small steel components Single and series components Descaling Derusting Cleaning Surface preparation Location / Production Lichtenfels (Germany) / Kecskemét (Hungary) As a manufacturer, we produce shot blasting machines individually according to customer requirements. Other sizes and special designs are available. We will be happy to provide you with a non-binding offer. Price on request

Condition: repair required (used), Manufacturer: FANUC Type: A04B-0221-B201 The condition of the machine is unknown; it is not functioning. It is being sold in its current condition. !! We do not know what the problem is! Gbsdpeik Hb Tsfx Aayst

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, total length: 1,050 mm, total width: 650 mm, workpiece height (max.): 250 mm, AGIECUT Excellence 3 eCut Year of manufacture: 2005 Travel paths: X = 500 mm, Y = 350 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.10 µm Available wire diameters: 0.10 – 0.33 mm Submerged tank machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Including AGIEJOGGER hand box for convenient machine setup Gbsdoyu Iq Espfx Aayet Including AGIESETUP 3D AGIEVISION control system AGIE IPG generator with eCut technologies Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be cleaned, overhauled, and thoroughly tested by us upon receipt of order. Includes user training at Techma on your overhauled machine Optional services available on request: - Transport - Commissioning - Chiller unit - Clamping devices

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, The GF AgieCharmilles CUT 30P, built in 2011, is a powerful and precise used wire EDM machine specifically designed for demanding machining applications in the metalworking industry. Thanks to state-of-the-art technology and intelligent control, the CUT 30P offers the highest cutting quality, low maintenance requirements, and an excellent return on investment. Main Features & Benefits: ✅ Large work area: Workpiece size: max. 1050 x 800 x 350 mm Maximum workpiece weight: 1000 kg Travel paths: X/Y/Z: 600 x 400 x 350 mm U/V: ± 50 mm Conical machining up to ± 25° / 80 mm ✅ High-precision machining: Positioning accuracy thanks to glass scales Automatic wire tensioning for consistently precise cutting results Surface quality up to Ra < 0.25 µm ✅ Efficient wire system: Wire diameter: 0.15 – 0.30 mm Automatic wire feeding and rethreading 25 kg wire spool for long operating times ✅ Intelligent control & user-friendliness: Windows-based control with intuitive user interface 15" LCD display for easy programming DXF import & 3D graphic check for precise simulations Gedpsv S Ua Defx Aayebt ✅ Reliability & low operating costs: Energy-efficient generator with low power consumption (9 kVA) Low maintenance costs thanks to robust construction and durable wear parts Integrated collision protection for maximum safety Ideal for: ✔ Tool & mold making ✔ High-precision components ✔ Series production & prototyping Experience maximum productivity with the GF AgieCharmilles CUT 30P – The perfect choice for precise and economical wire EDM! 📌 Our used machine, built in 2011, is cleaned, overhauled, and comprehensively tested before sale to ensure the highest quality and reliability. 📩 Contact us for a customized quote or demonstration! We are also happy to offer commissioning and training on the machine.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Challenge 2 eCut Year of manufacture: 2005 Travel ranges (X/Y/Z): 350 x 250 x 256 mm Travel ranges (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface finish: 0.2 µm Ra Available wire diameters: 0.10 - 0.33 mm Includes AGIE universal clamping frame Includes AGIE JOGGER handbox Includes console with USB port Gsdpfxoxyxfpj Aayjbt The machine will be cleaned, overhauled, and tested by us after receipt of the order. Commissioning and training can also be provided upon request.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Challenge V2 Year of construction 2007 Travels (X/Y/Z): 350 x 250 x 256 mm Travels (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface: 0.2 µm Ra Gbodswqcm Ujpfx Aayot Available wire diameters 0.10 - 0.33 mm Incl. AGIE universal clamping frame Incl. AGIE JOGGER handbox Incl. console with USB connection The machine will be cleaned, overhauled and tested by us upon receipt of order. We are also happy to offer commissioning and training.

Year of construction: 2006, condition: refurbished (used), AGIECUT Challenge 3 eCut Year of manufacture: 2006 Travel ranges: X = 500 mm, Y = 350 mm, Z = 256 mm Gsdpfx Aegfm Rreayobt Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 – 0.33 mm Wire EDM machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Incl. AGIEJOGGER hand box for convenient setup Incl. AGIESETUP 3D AGIEVISION control AGIE generator with eCut technologies for faster and more efficient machining Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg After receiving your order, we will clean, overhaul, and thoroughly test the machine. Subsequently, we will commission the machine at your facility. You will receive a 6-month warranty on the machine. We would be pleased to offer you the following additional services: - Control and maintenance training - Cooling unit - Programming system - Consumables - Clamping devices - Transport

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, AGIECUT Classic 2S Year of manufacture 2001 Travel paths: X= 350 mm, Y= 250 mm, Z= 256 mm Travel paths U/V axis: +/- 70 mm Maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achieveable surface quality: Ra: 0.30 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Gjdpfx Aaev Dkvroysbt Water bath machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for convenient setup AGIE HSS-C generator AGIEVISION control Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and overhauled after we receive the order. A test cut is then carried out with the best surface for acceptance. You receive a 6-month warranty on the machine. We are happy to offer you commissioning and training on site.

Year of construction: 2008, condition: refurbished (used), AGIECUT Challenge V3, Year of manufacture 2008 travels: X= 500 mm, Y= 350 mm, Z= 256 mm travels U/V-axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Gbsdpom Amf Dsfx Aayjt Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Incl. AGIEJOGGER- hand box for comfortable set-up Incl. AGIESETUP 3D AGIEVISION 5 control system AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine is cleaned, overhauled and extensively tested by us after receipt of order. Incl. user training at Techma on your overhauled machine Optional: transport, commissioning, training, cooler