Wire drawing machine
TEUREMA EHS-110

Name: TEUREMA EHS-110
Brand: TEUREMA
Availability: InStock

Year of construction

1999

Condition

Used (fully functional)

Location

Pedro Muñoz Spain

Basic data

Machine type:: Wire drawing machine

Manufacturer:: TEUREMA

Model:: EHS-110

Year of construction:: 1999

Condition:: ready for operation (used)

Functionality:: fully functional

Price & Location

Location:: Pedro Muñoz, Spain

Call

Details about the offer

Listing ID:: A22677512

Update:: 03.09.2026

Description

TEUREMA EHS-110 WIRE DRAWING LINE

Year of manufacture: 1999
Maximum speed: 10 m/s
Total installed power: 230 kW

TEUREMA EHS-110 wire drawing line with robust construction, equipped with a Tecno Impianti drawing bench and prepared for industrial use. The machine has undergone a complete electrical modernization, including a new main electrical panel, Siemens S7-1500 PLC, Siemens 1200 HMI screen, 100% new wiring, and new push-button stations, which significantly improves the reliability, maintenance, and operability of the unit.

LINE COMPOSITION

Coil stands
- 2 tilting winders
- Maximum capacity per winder: 3,000 kg

Vertical winding tower
- 6-meter tower
- Lifting and lowering carriage with a hoist

Mechanical decaling unit

Soaping unit
- Motor: 1.5 kW
- Speed: 1,500 rpm

TECNO IMPIANTI DRAWING BENCH
- Number of steps: 2
- Two-ring coil:
- 1st ring: Ø 610 mm
- 2nd ring: Ø 760 mm
- 3-speed gearbox:
- 3.90 m/s
- 7.20 m/s
- 10.00 m/s
- Power: 160 kW
- Frequency: 50 Hz

Horizontal coiler
- Horizontal drive
- Maximum coil capacity: 3,000 kg
- 2-speed gearbox:
- 7.3 m/s
- 10.0 m/s
- Maximum coil diameter: Ø 1,200 mm
- Core diameter: Ø 600 mm
- Usable width: 900 mm
- Power: 45 kW

TECHNICAL DATA
- Inlet diameter: 5.5 to 14 mm
- Outlet diameter: 4 to 12 mm
- Number of blocks: 1 vertical
- Maximum line speed: 10 m/s
- 2 CL30 A 33 Eurolls cassettes
- Rollers: Ø 150 x Ø 90 x 15/20 mm
- Total machine power: 230 kW
- Frequency: 50/60 Hz

ELECTRICAL AND AUTOMATION UPGRADE
- Completely new main electrical panel
- Siemens S7-1500 PLC
- Siemens HMI 1200 screen
- 100% new wiring
- New push-button stations
- New programming

Itjdpfx Ajzycakscpen
AVAILABLE SERVICES
Possibility of supply with:
- installation
- assembly
- commissioning
- technical assistance
- adaptation according to customer needs

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2026

2 listings online

Call

Send inquiry

Telephone & Fax

+34 669 4... show

These listings may also fit your interest.

Listing

Cut-to-length and slitting line STAM STAM-2000

Ciriè

1,372 km

Cut-to-length and slitting line
STAMSTAM-2000

Call

Condition: used, Year of construction: 2000, Manufacturer: STAM Model: Stam 2000-3 Year: 2002 Condition: Used Stock number: 0395 Uncoiler – max. weight (ton): 30 ton Uncoiler – max. width (mm): 2,000 mm Uncoiler – min. width: 400 mm Uncoiler – outer coil diameter: 1,800 mm Uncoiler – hydraulic expansion: 508 mm min. 610 mm max. Straightener – strip width: 2,000 mm Straightener – max. strip thickness: 3 mm Straightener – min. strip thickness: 0.6 mm Straightener – number of rolls: 17 Straightener – roll diameter: 46 mm Electronic feeder – min. pitch: 250 mm, max. pitch: 4,000 mm. Itsdpfeywd Akex Acpen

See details

Listing

Grafenstein

1,581 km

Tractor Valtra N155
ValtraN155

€110,000

ONO plus VAT

Call

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, operating hours: 313 h, power: 114 kW (155.00 HP), fuel type: diesel, maximum speed: 50 km/h, first registration: 01/2024, next inspection (TÜV): 07/2029, color: green, overall weight: 6,500 kg, front tire size: 540/65R28, rear tire size: 650/65R38, motor manufacturer: AGCO Power, gearing type: mechanical, Equipment: additional headlights, air conditioning, cabin, front power take-off, hydraulics, lighting, trailer coupling, Valtra N155 Forestry – Top-spec – 50 km/h – Front PTO – Olive Green Metallic For sale is a very well-maintained Valtra N155 forestry tractor in the exclusive olive green metallic paint finish. The tractor impresses with its extensive equipment and is ideally suited for both forestry and agricultural applications. Technical data: Manufacturer: Valtra Model: N155 Forestry First registration: 2024 Power: approx. 114 kW / 155 hp Fuel: Diesel Emission stage: Stage V Transmission: DPS Power Shuttle 30/30 Maximum speed: 50 km/h Total weight: 6,500 kg Next §57a/TÜV inspection: 07/2029 Tires: Front: 540/65 R28 Alliance Forest Rear: 650/65 R38 Alliance Forest Equipment: Cab with automatic climate control and footwell heater Front hydraulics and front PTO Isdpfx Acozi Erbepotn Rear linkage HD 4 hydraulic rear control valves Power Beyond 2 hydraulic front control valves Automatic trailer hitch (38 mm pin) Premium work lights 2 yellow rotating beacons Forestry equipment Roof-mounted work light and extensive lighting system The tractor is in very good condition and is ready for immediate use. Viewings are possible at any time by appointment.

See details

Listing

GUIDA Slitting line 1500 x 6 - Available as NEW in 2027 GUIDA Slitting line 1500x6

Madrid

1,666 km

GUIDA Slitting line 1500 x 6 - Available as NEW in 2027
GUIDASlitting line 1500x6

Call

Condition: used, Year of construction: 2026, Slitting line 1500 x 6, made by GUIDA Line composition: - Loading coil car - Uncoiler with sliding base and single expanding mandrel - Pressure arm Iodpfx Aeymciajcpetn - Feeding telescopic table with cutting edge and deflecting roll - Entry pinch roll - Crop shear - Tilting table - Mechanical centering device - Calming rolls - Slitting shear - Looping pit equipment (entry and exit saddles + connecting tables) - Felt press - Deflecting rolls - Titling table - Recoiler with single expanding mandrel - Separator arm - Electric equipment - Hydraulic equipment - Safety fences protection - Several tooling and accessories - Spare parts Material to be processed: Hot rolled carbon steel Material tensile strength: 400 N/mm² Coil width max.: 1.500 mm Thickness: 1 - 8 mm Coil weight: 20 Tn Coil inside diameter entry: 500/600 601 + steel spacers for bigger diameter Coil external diameter Entry/Exit: 1.700 mm Slitting shear mandrels diam.: 220 mm Blades diameter: 355 mm Line speed: 50/25 m/min with manual speed change gear Working Direction: From left to right Power supply tension: 380/50 Hz

See details

Listing

Đakovo

1,902 km

Wire Bending machine
VIBRAV 25

Call

Listing

Silvi

1,910 km

Guard Rail Roll Forming Line

Call

Condition: used, Guard Rail Roll Forming Line: • The production line for road safety barriers consists of: • Accessories and rollers for the production of 2- and 3-wave guard rails • Bending machine for 2- and 3-wave profiles • 19-station roll forming machine, complete with rollers and motorization Iodpfx Ajxnmmqjcpjtn • No. 3 punching stations • No. 1 cutting station • No. 7 hydraulic power units • No. 1 station with feeding rollers

See details

Listing

Berlin

1,140 km

Label printing machine
GallusTCS 250

Call

Year of construction: 2017, condition: used, Machine Configuration • Unwinder • Spot flexo UV printing unit • 5 × wet offset printing units with CABER system • Semi-rotary screen printing unit • 2 × semi-rotary hot foil stamping units • Additional semi-rotary screen printing unit • Spot flexo UV / hot air unit • Semi-rotary die-cutting unit • Flatbed embossing unit • Flatbed die-cutting unit • Buffer section • Rewinder Printing & Format Max. printing speed: up to 11,000 impressions/hour Web width: min. 130 mm / max. 265 mm Max. printing width: printing width: 254 mm Max. working width: 254 mm Repeat length: • min. 101.6 mm (4”) • max. 254 mm (10”) Repeat accuracy: 0.01 mm Unwind / Rewind Max. unwind diameter: 800 mm Unwind shaft: 3” (max. 300 kg) Optional shafts: 2” (max. 150 kg) 6” (max. 300 kg) Rewind configuration: • Dual rewind: max. 650 mm each • Single rewind: max. 780 mm Core diameter: 3” Itsdpfx Aoziatgocpen Drying System UV Drying (IST/UVITerno) UV power: 166 W/cm Air extraction per UV unit: approx. 550 m³/h Total extraction (UV system): up to 2450 m³/h Materials Suitable for Printing Paper: 80 – 180 g/m² Film (monofilm): 0.1 – 0.25 mm Carton: up to 300 g/m² (max. thickness 0.3 mm) Self-adhesive materials (SK): • PE, PP, PET Production Environment Minimum operating temperature: 18°C Recommended humidity: 40 – 60% Features & Advantages • Multi-process printing (offset + flexo + screen + hot foil) • High precision register control • Semi-rotary converting capabilities • In-line finishing (die-cutting, embossing) • Suitable for high-quality label production • Flexible configuration for complex label jobs

See details

Listing