Used Grasso Screw Compressor Unit Amonia/R717 for sale (34,230)

Condition: excellent (used), Offer consisting of: complete compressed air system comprising SCC Flexi 55kW screw compressor, air-cooled, SCC DRA 480 refrigerant dryer, only about 2000 load hours, compressed air tank 1000 litres (OKS brand), year of manufacture: 2021 Iisdpfsyl S Ebex Am Eja

Condition: good (used), overall weight: 1,200 kg, volume flow: 890 m³/h, Manufacturer: Worthington Model: RLR100V6 Max. working pressure: 9,5 Bar Iijdpfx Asuf Nibem Eoa Power: 100Hp / 75KW 75 kW screw compressor with frequency inverter, with a flow rate of 880 m3/hour. Flow rate: 890 m3/hour. Three-phase 380V 3000 rpm Weight: 1200 kgs.

Condition: good (used), WSM Stationary Screwing Unit Assembly and testing of components for car radios and navigation systems. The assembly station is enclosed in a protective housing. The service doors are equipped with monitoring switches with interlocks. The doors are locked during automatic operation and can only be opened during automatic stop or manually after pressing the "Doors" button on the control panel. Automatic operation cannot be started with a door open. Operational Sequence The station is loaded with the pre-assembled component via the transfer belt. The following describes the operation steps of the automatic station with a transfer belt. In normal operation, all three stations operate in parallel. - Positioning the test unit (WT) with the pre-assembled module in station 2.1 - Lowering the carrier with the scanner and vision sensor - Scanning the 3 codes (front panel, front PCB, SD PCB), comparison with the database - Checking the correct locking of the FFC in the connector - Raising the carrier and lowering the test unit onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.2 - Positioning the screwdriver and screwing the front PCB in place - Lowering the test unit (WT) onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.3 - Lowering the light shield and making contacts, adjusting the carrier with the test sensors from below - Type-dependent testing of the SD + CD slot lighting and buttons - Functional test of the CD eject button - Lowering the test unit (WT) onto the conveyor belt > continue If errors occur during testing, they are displayed on the screen. and can be repaired if possible. For this, the system is switched to manual operation and the doors are opened. After the repair and restarting the automatic system, the workpiece carrier is tested again in the station. Iisdpfx Aoibichem Eja If a repair is not possible (e.g., due to a screw error), the workpiece carrier is marked as NIO (Not Okay) in the control system and is not processed further. Manual NIO marking and rejection is also possible. Financing through our bank is also available. komplett-konzept.leasingo.de More assembly stations, new and used, can be found in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2010, operating hours: 7,637 h, overall weight: 1,970 kg, ALMiG Direct 75 screw compressor Iiodpfx Ajttucgsm Esa The DIRECT 37 - 315 series is designed in such a way that it can be operated extremely economically in any kW class thanks to its unique design concept and can therefore be used for a wide range of applications. These fixed-speed compressors are particularly suitable for use as base load compressors. Separation system - highest compressed air quality thanks to proven multi-stage separation Air Control P - the intelligence of the compressor; thinks, monitors, documents. With the option of connecting to the Internet, there are virtually no limits to communication. Drive system - highly efficient, reliable direct drive Compressor - powerful, excellent efficiency Cooling unit - large-area coolers for the lowest compressed air outlet temperatures and optimum cooling liquid temperatures System fan - powerful, efficient, high-performance Drive motor - robust drive motor designed for reserve capacity ALMiG Direct 75 Year of construction 2010 Final pressure 11 bar Motor output 75 kW Volume flow according to ISO 1217 (Annex C-1996):11.58 m3/min Length 2300 mm Width 1400 mm Height 1860 mm Weight 1970 kg Operating hours 7637 h Load hours: 6317 h Downtime hours 167714 Total delivery volume 4506000 m³ Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more ALMiG compressors - new and used - in our store! International shipping costs on request!

Condition: good (used), Year of construction: 2011, operating hours: 10,337 h, overall weight: 3,830 kg, ALMiG Gear 132 screw compressor The screw compressors in the GEAR series are particularly suitable for very high compressed air requirements. The maintenance and service-friendly drive concept of the GEAR compressors includes a robust drive motor with strong power reserves. The highly efficient gearbox works with minimal slip, high operational reliability, is virtually loss-free with an efficiency of > 98% and is gentle on the drive. In addition, highly efficient separation of the cooling medium enables a minimum residual oil content of just 2-3 mg/m³. The encapsulated design of the gear set makes these systems ideal for use under the toughest operating conditions. Ideal for very high compressed air requirements Robust drive unit with high power reserves Virtually loss-free concept with efficiency > 98% Maintenance and service-friendly drive concept ALMiG Gear 132 Iodpjttv Ibsfx Am Esia Year of manufacture 2011 Final pressure 10 bar Motor power 132 kW Volume flow : 18,04 Length 2800 mm Width 1400 mm Height 2025 mm Weight 3830 kg Operating hours 10337 h Load hours: 9378 h Downtime hours 13887 h Total delivery volume 11333000 m³ Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more ALMiG compressors - new and used - in our store! International shipping costs on request!

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1.9764.5/3960, overall weight: 290 kg, total length: 784 mm, total width: 820 mm, total height: 1,017 mm, power: 15 kW (20.39 HP), operating pressure: 8 bar, type of cooling: air, Equipment: compressed air system, compressor, type plate available, The KAESER SK26 lubricated compressor from 2004 is a reliable solution for your compressed air requirements. Renowned for its durability and efficiency, this model is ideal for industrial environments that demand consistent performance. Even as a pre-owned unit, the SK26 remains a popular choice for those seeking both cost-effective and high-performing solutions. The KAESER SK26 features proven technologies to optimize energy efficiency while reducing operating costs. Its cooling and lubrication systems are engineered to extend the compressor’s service life, ensuring long-lasting and trouble-free operation. This makes it a smart option for any business looking to streamline operations while keeping expenses under control. Iiodpfxjx Tt Arj Am Eoa With its robust design and ability to deliver a continuous airflow, this compressor is suitable for a variety of industrial applications. Whether for continuous operation or specific requirements, the 2004 KAESER SK26 delivers reliable performance to help maintain high productivity within your company.

Condition: ready for operation (used), Year of construction: 2020, overall weight: 467 kg, total length: 1,885 mm, total width: 650 mm, total height: 1,425 mm, space requirement length: 2,100 mm, space requirement width: 1,000 mm, space requirement height: 1,800 mm, power: 7.5 kW (10.20 HP), fuel type: electric, volume flow: 60 m³/h, operating pressure: 10 bar, The BOGE Solid Air screw 7BDR is a high-performance oil-lubricated Rotary screw Air Compressor designed for use in most industrial operations. The Compressor features a 7.5kw motor, mounted on a 250 Litre Air Receiver, and a pre-installed refrigeration air dryer, making this one of the easiest plug-and-play compressed air solutions available. Isdpfjxqx Daox Am Eoia

Condition: excellent (used), Year of construction: 2016, operating hours: 54,737 h, functionality: fully functional, Screw compressor Atlas Copco GA250 250 kW 8.5 bar 41.70 m³/min Iodpfxeym Npto Am Eoia

Condition: good (used), Year of construction: 2012, Ingersoll Rand screw compressor Iodpfxsu Ic Rys Am Eeia 225 Kw Year 2012

Condition: excellent (used), Year of construction: 2008, For sale: Atlas Copco GA90 rotary screw compressor, year 2008. The unit is in full working order, well-maintained, and has been serviced regularly. Ready for operation, ideal for industrial and production applications. Technical data: - Manufacturer: Atlas Copco - Model: GA90 - Year of manufacture: 2008 - Type: rotary screw compressor Iiedpfx Amjyggtie Esa - Motor power: 90 kW - Operating pressure: 7.5–13 bar (depending on setting) - Output: approx. 15–16 m³/min - Condition: used, very good - Power supply: 400V Advantages: - Reputable Atlas Copco brand – reliability and durability - Fully functional, serviced, ready for immediate use - High performance – ideal for large industrial plants - On-site inspection possible

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Iedeuzn Nnjpfx Am Esia Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: excellent (used), 11 kW 2016 with dryer, 1000 l tank, 1600 l/min Iijdpfx Amsyk Iyfo Eja

Condition: good (used), Year of construction: 2007, operating hours: 9,600 h, functionality: fully functional, Kaeser SK21 screw compressor from 2007 in excellently maintained condition. Maintenance kit (oil separator cartridge, replacement filter, air filter, and oil) is included. Maintenance records and compressor logbook are available. Power: 11 kW Iiodpfex H Ulujx Am Eoa Pressure: 8 bar Load hours: approx. 9,600 h #8442

Condition: excellent (used), Year of construction: 2016, volume flow: 3.62 m³/h, operating pressure: 8 bar, Boge C 30 FD Screw Compressor Variable speed (inverter-controlled) With refrigerant dryer Motor: 22 kW Output: 3.62 m³/min Pressure: 8 bar Year of manufacture: 2016 Operating hours: 11,260 h Iijdoywz Hmopfx Am Eoa COMPRESSOR IN FULL WORKING ORDER.

Condition: used, Year of construction: 1999, serial number 711- 00 37 48 Iiodpoq Awinofx Am Esa total power requirement 11 kW

Condition: used, Year of construction: 2014, power capacity 3 kW feed pressure 7 bar liter capacity / l weight 286 kg Chicago Pneumatic CPVR15 CE screw compressor - Year of manufacture 2014 The CPVR15 CE impresses with its robust design, long service life and low operating costs. Whether in workshops, workshops or industrial applications - this compressor reliably supplies you with the compressed air you need. Drive power: 3 kW Delivery pressure: 7 bar Air output: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50-58 dB(A) Voltage/frequency: 415 V / 50 Hz Application: Workshops, craft businesses, industrial applications with medium compressed air requirements Iiodpsh A Sfdsfx Am Eoa Included in delivery: 1x compressor - Chicago Pneumatic CPVR15 CE 1x refrigeration dryer - OMI ESD 108 - 0.70kW 1x Beko Öwamat 2 - oil-water separator Technical data was taken from publicly available sources

Condition: used, Year of construction: 2009, Speed / U/min. intake pressure / bar weight / kg total power requirement / kW Complete compressed air system - screw compressor + refrigeration dryer (Drypoint RA 500) + 2x compressed air boilers (3,000 litres each) Isdpfx Amjud Iwzo Eoia Make: COMPAIR Motor power: 75 kW Type: LL80 7.5A Year of manufacture: 2009 Serial no.: CD1000057200 Control system: Delcos 3100 Refrigeration dryer: Drypoint RA 500 Compressed air tank: 2x galvanised tanks, 3,000 l each - total volume 6,000 l Load hours: 79,495 This compressed air system from COMPAIR offers a powerful and efficient solution for industrial applications with high air requirements. LL80 7.5A screw compressor: The compressor with a motor output of 75 kW is robust, low-maintenance and designed for continuous use. Its modern technology ensures a stable and consistent compressed air supply even under high loads. Ideal for production facilities, workshops or other industrial areas. Delcos 3100 control unit: This intelligent control unit makes it easy to operate, monitor and adjust the compressor. It ensures optimum operation, energy efficiency and protection of the system against damage. Drypoint RA 500 refrigeration dryer: An integrated refrigeration dryer is essential for removing moisture from the air. This protects downstream machines and tools from corrosion and extends the service life of the entire system. Compressed air tank - 2x galvanised tanks with a volume of 3,000 l each: The two robust, galvanised tanks offer a large storage capacity of 6,000 litres in total. This keeps the pressure stable and maximises performance.

Condition: used, engine 220/380/420 V ampere 4.75/2.75 A motor speeds: 1420 U/min. engine output 1,1 kW weight 100 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Iisdpjhm Ucpsfx Am Eja Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1995, feed pressure 8 bar total power requirement 11 kW Year 1995 +++++ Iodpfsid Npusx Am Eeia Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Year of construction: 2017, overall weight: 403 kg, volume flow: 2 m³/h, operating pressure: 13 bar, input voltage: 400 V, KTC KME 15 kW Screw Compressor Iisdpfx Amsyb Dbme Eea Mounted on a 500 l pressure vessel With refrigeration dryer. 15 kW motor Capacity 2.00 m3/min Pressure 10 bar Year of manufacture: 2017

Condition: excellent (used), Year of construction: 2006, Screw Compressor Manufacturer: Kaeser Model: BSD 72 Year of manufacture: 2006 Ijdpjyi A Stsfx Am Eoia Power: 37 kW Volume flow: 7.2 m³/h Max. pressure: 11 bar Idle hours: approx. 33,245 h Load hours: 17,940 h

Condition: good (used), functionality: fully functional, Description: Screw compressor ZR 250 1998 Characteristics: Capacity 7.50 bar Power 245 kW Iedpfx Amevyrq As Ejia Voltage 500 V

Condition: good (used), functionality: fully functional, Description: Screw compressor with drum dryer ZR 250 1997 Characteristics: Capacity 7.50 bar Power 245 kW Ijdpfx Aevyrtdom Ejia Voltage 500 V

Condition: good (used), functionality: fully functional, power: 250 kW (339.91 HP), Description: Iiedpfx Aevyrlaem Eoa Screw compressor ZR 4-52 with drum dryer Characteristics: Capacity 8.00 bar Power 250 kW Voltage 500 V Air flow rate l/min 634 Running hours at last maintenance: 50307

Condition: good (used), Year of construction: 2001, functionality: fully functional, power: 305 kW (414.68 HP), Description: Screw compressor with drum dryer ZR315VSD Characteristics: Capacity 8.60 bar Power 305 kW Voltage 500 V Running hours at last maintenance: 46383 Iodpfxsvyq Tpe Am Eeia