Used Handtmann Vf-620 for sale (1,741)

Condition: like new (used), Year of construction: 2017, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,200 mm, table length: 3,500 mm, table width: 1,750 mm, spindle speed (min.): 24,000 rpm, Heidenhain iTNC 530 control Main spindle HSK-A 63 Speeds: 1-24,000 rpm Tool changer for 50 tools Through-spindle cooling Dsdow S T Iqepfx Anzewa 5-axis milling machine with simultaneous milling head (Gabelkopf)

Condition: excellent (used), Year of construction: 2018, operating hours: 20,000 h, fuel type: gas, output voltage: 6,300 V, output frequency: 50 Hz, Jenbacher J620 natural gas generator. Complete power plant: - Generator - Heat exchanger - Control panels - High-tension (HT) and low-tension (LT) pumps and valves - High-tension (HT) radiator and low-tension (LT) cooling tower - Gas train - Silencer - Oil pumps - Circuit breakers Dwsdpfxjzdtzye Anzja All official reports are available. Borescope photos are available. If you are interested, please do not hesitate to arrange an inspection at any time. Status: Currently dismantled and stored in a warehouse.

Year of construction: 2012, condition: good (used), Offered from an insolvency proceeding is a ready-to-use extraction and filtration unit from ULT. Model ACD 1000 VF Year of manufacture 2012 230 volts Intake connection 150 mm Extraction connection 200 mm Dododucl Nepfx Anzowa Dimensions in mm approx. 1250x680x800 Weight 125 kg Rated capacity 1000 m³/h The extraction system is suitable for extracting and filtering fumes and odors. Dry chemical gases and fumes, not explosive. It can be used directly as a machine extraction system, as well as an extraction system with articulated arms.

Condition: ready for operation (used), Year of construction: 2006, number of axes: 3, This 3-axis HAAS VF-8 vertical machining center was manufactured in 2006. It operates on a voltage of 360-480, with a phase 3 and frequency of 50/60 Hz. The full load capacity is 20 AMPS, with a largest load of 35 AMPS. Consider the opportunity to buy this HAAS VF-8 vertical machining center. Contact us for more information. • Voltage: 360–480 V • Phase: 3 Djdjx D Ep Aopfx Anzewa • Frequency: 50/60 Hz • Full-load current: 20 A • Largest load current: 35 AInternal cooling 21 barSpiral chip conveyorProgrammable coolant nozzleNew gearbox and spindle installedIn June and July 2024, the following components were renewed:GearboxVector drive, spindle driveDecember 2024: Double arm tool arm

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,163 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 794 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HAAS VF-3SS was manufactured in 2017 and features a robust Haas CNC Control. It offers X-axis travel of 1,016 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine supports a spindle speed of 12,000 rpm and a rapid traverse of 30.5 m/min. If you are looking to get high-quality milling capabilities, consider the HAAS VF-3SS machine we have for sale. Contact us for more information. • Machine hours (as shown on the screen): • Power On: 25,416 h • Cycle Start: 8,164 h • Table: • Size: 1,372 × 457 mm Dwjdpfx Ajx D I Stsnzoa • Tool changer: 30+1 positions (side-mount) • CNC control: Haas CNC Control

Condition: ready for operation (used), Year of construction: 2022, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, This 3-axis HAAS VF-2SSYT with Pallet Pool 3+1 was manufactured in 2022. It features a 30 hp, 22.4 kW in-line spindle, capable of 12,000 rpm, and a 50+1 tool changer. It includes a 15" screen and a 3+1 pallet pool with 900x450 mm pallets. If you are looking to get high-quality milling capabilities, consider the HAAS VF-2SSYT machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Tool changer: 50+1 tool changer • Extra coolant: 360 liters • Pallet pool: 3+1 pallet pool with 900x450 pallets Dedpfx Aex Hbluenzewa • 21 bar trough spindle • 15" screen Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,792 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 794 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HAAS VF-3SS vertical machining center was manufactured in 2015. It features a 1,372 × 457 mm table, a maximum load of 794 kg, and a spindle speed of 12,000 rpm. The machine includes a 30+1 side-mount ATC and a rapid traverse of 30.5 m/min. If you are looking to get high-quality milling capabilities, consider the HAAS VF-3SS machine we have for sale. Contact us for more information about this machine. • Electrical: • Voltage: 354 / 488 V • Phase: 3 • Frequency: 50/60 Hz • Full load: 40 A • Largest load: 70 A • Short circuit interrupting capacity: 10,000 A • Short circuit current: 5,000 A RMS symmetrical • Machine hours (from control): • Power on time: 19,635 h Dwsdpfx Anex D I Smszsa • Cycle start time: 8,564 h • Table: • Size: 1,372 × 457 mm • Tool changer: 30+1 side-mount ATC • Control unit: Haas CNC Control

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-5SS was manufactured in 2016. It features an X-axis travel of 1270 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine is equipped with a spindle speed of 12,000 rpm and a 24-position tool magazine. If you are looking to get high-quality machining capabilities, consider the HAAS VF-5SS vertical machining centre we have for sale. Contact us for further details. • T-slots: 7 • Max spindle torque: 122 Nm @ 2000 rpm • Rapid feed: 30 m/min • Tool magazine: 24 positions Technical Specification Dodpfx Anoypb A Dezowa Taper Size ISO 40

Condition: as good as new (ex-display), Durkopp adler -3-TRANSPORT -1 NEEDLE WITH TRIM-KNIFE Dwsdpfx Anohc Nbfezoa -THREAD TRIMMER

Condition: used, Year of construction: 1986, Schmidt VF5 ZL Front-Mounted Snow Blower Year of manufacture: 1986 Specifications: Attachment plate size: 3 Discharge chute with hydraulic side adjustment Drive via PTO shaft Dwsdpfxsx Svwcs Anzsa Clearing width: 2,600 mm Weight: 1,650 kg Sale in current condition and only to businesses! Our business hours: Mon-Thu: 07:00 - 15:30 Fri: 07:00 - 15:00 Offer based on our general terms and conditions! Sale to commercial customers only! Used vehicles/equipment are sold without liability for material defects according to our T&Cs! If you have any further questions, I am at your disposal. For viewings and/or test drives, please arrange an appointment in advance! Vehicles/equipment are not always available on site.

Condition: excellent (used), Year of construction: 2007, Vacuum sausage filler, Handtmann VF 608. The filler is in very good condition. Includes 10 different filling tubes. Djdpfeyu Tzvjx Anzjwa

Condition: excellent (used), Connection: mains plug 230 / 12 V max. 620 g e=0.01 g min. 0.1 g d=0.001 g Dwodpfey Edaxox Anzsa

Condition: used, Year of construction: 1990, max. counting speed sheets 2000 /min Dwedpfxoy Tpmme Anzsa max. paper size 50 x 70 cm

Condition: used, Year of construction: 2017, AWEA FCV 620 year 2017 FANUC OiMF Manual Guide 2x Tool probe Renishaw X-axis travel: 635 mm Y-axis travel: 535 mm Dodpfx Anovy H U Nszjwa Z-axis travel: 460 mm B-axis rotary range: -50° ~ +110° C-axis rotary range: 360˚ Table diameter: Ø 650 mm Spindle taper: BT40 Spindle speed :Direct drive 12,000 Cooling through the spindle Spindle motor (cont./min): 11/15 kW (FANUC 12,000 rpm) X / Y / Z axes rapid feed rate: 36 m/min. Tool magazine capacity: 32T Weight 8500kg

Condition: used, Year of construction: 2023, Crackerboard distance front 180 sttt 285 mm track loosener air brake shaft / for rear roller / Dsdor Ty Nzjpfx Anzjwa

Condition: used, Year of construction: 2024, Tined harrow DSTS roller Lighting Traction booster d=40mm mechanical / stone safety device Telescopic drawbar Cat III Drawbar bracket f. traction booster / coulter set tip+guide 25mm Roller level board DSTS 40km DSTS roller Running gear / 40km/h Compressed air brake Dodpfxsrxutcs Anzewa

Condition: used, Year of construction: 2023, Chassis 40km/h Tined Weeder DSTS-Roller Lighting Expert opinion for operator / 40km/ AB:2158642 15.06.2023 hydraulic stone protection telescopic drawbar Cat / III/IV coulter set HMSpitze+Leitbl 25 coulter set Flügelsch flat 30m / roller level board DSTS Djdpfet Dnuhox Anzewa

Condition: used, Year of construction: 2000, pressure 100 t throat 620 mm stroke 0-100 mm hole diameter in sheet thickness 40 in 20 mm Djdpfeyv Ncyox Anzewa no. of strokes 49 Hub/min total power requirement 15 kW weight of the machine ca. 3.500 kg

Condition: used, functionality: fully functional, used battery 80 Volt type 4 PzS620 Dimensions: 1025 x 708 x 784 mm Refurbished in KW 19 / 2026 with test report Capacity test (C5 discharge test) Remaining capacity: 96% Ready for operation, filled and charged incl. cable and Euro 320 A connector incl. Aquamatik Other sizes (24V, 48V, 80V) available on request! Djdpjy Rfcljfx Anzewa

Condition: ready for operation (used), A Haas CNC vertical milling center is available. Travel X/Y/Z: 1010mm/508mm/635mm, table dimensions X/Y: 1200mm/450mm, max. table load: 1500kg, rapid traverse: 25m/min, feed rate: 16m/min, tool stations: 20, machine dimensions X/Y/Z: approx. 3500mm/2500mm/2800mm, weight: approx. 6000kg. An on-site inspection is possible. Dwjdpsyv H Hiefx Anzea

Condition: ready for operation (used), Filling opening diameter: 98mm, material: stainless steel, max. output: 1400kg/h, perforated disk: 3mm, dimensions X/Y/Z: approx. 1000mm/850mm/1400mm, weight: approx. 300 kg. Dsdpjtryk Nofx Anzowa

Year of construction: 1992, condition: ready for operation (used), Turrets: 2, tool stations: 12, tool holder: VDI 40, max. turning diameter: 320mm, max. swing diameter: 390mm, spindle bore: 61mm, speed: 5000rpm, spindle power: 15kW, travel X/Z: 230mm/430mm, machine dimensions X/Y/Z: 3900mm/2000mm/2900mm, weight: approx. 8600kg. Including robot. Documentation available. On-site inspection is possible. Dsdpfxoyhgpaj Anzowa

Condition: like new (used), Year of construction: 2011, functionality: fully functional, operating hours: 1,013 h, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, controller manufacturer: Siemens, table length: 1,100 mm, table width: 560 mm, controller model: 840d SL ShopMill Operate, rotational speed (max.): 12,000 rpm, operating hours of spindle: 203 h, For sale is a machining center of the brand Spinner and the type P3-620 The machine has an internal 2 compartment pallet changer, which makes it possible to set up during the work process. Dwedpfxot Sftwo Anzja Particularly noteworthy are the 203 spindle hours and the very good condition of the machine Technical data: Year of construction: 2011 Control: Siemens 840d-SL ShopMill Operate Spindle speed: 12,000 1/min Spindle holder: SK 40 Table dimensions: 1,100*560 mm Travel X 620 mm Travel Y: 520 mm Z travel: 460 mm Tool changer: 32 pockets (chain) Tool changer head: double arm Pallet changer: 2-fold (180 °) Machine lighting, Chip conveyor in the milling area, Chip conveyor scraper belt with coolant device Belt filter system with IKZ 40 bar Hydraulic oil cooling system, Rotary feed-through in the table On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Year of construction: 2008, HAAS VF-5D / 40 MACHINING CENTER TRAVELS : X : 1,270 mm Y : 660 mm Djdevf Nw Dspfx Anzewa Z : 635 mm DISTANCE BETWEEN PLANE – TABLE AND SPINDLE NOSE : 178 – 813 mm TABLE : DIMENSIONS : 1,321 x 584 mm LOAD CAPACITY : 1,815 mm NUMBER AND SIZE X PITCH OF T-SLOTTS : 7.14 X 80 mm SPINDLE : ROTATIONAL SPEED : 8,000 RPM SPEED RANGES : 2 SPINDLE NOSE : ISO 40 HIGH PRESSURE / INTERNAL COOLANT FEEDS : RAPID SPEED : 18,000 mm / min. WORKING SPEED : 12,700 mm / min. JOG : 0 – 1,260 mm / min. TOOL MAGAZINE : 24 POSITIONS POWER : 15 KW WEIGHT : KG. 7,000 YEAR OF FIRST INSTALLATION : 2008

Condition: ready for operation (used), Year of construction: 2008, operating hours: 23,838 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, rotational speed (max.): 7,500 rpm, Submitting a bid obligates you to collect the item on time by 30.01.2026! TECHNICAL DETAILS Travel X-axis: 1,270 mm Travel Y-axis: 508 mm Travel Z-axis: 635 mm Spindle speed: 7,500 rpm Table size: 1,320 mm x 455 mm T-slots: 14 mm MACHINE DETAILS Operating hours: 23,838 h Tool changes: 300,000 EQUIPMENT SK 40 taper with 40-position automatic tool changer Note: The two vices are not included in the scope of sale and delivery. Dwedpfx Ansx Nvv Hjzsa