Used Hess Perforated Plate Press for sale (22,450)

Condition: good (used), Year of construction: 2021, operating hours: 7 h, functionality: fully functional, Vertical baling press HSM V-Press 860 plus, year of manufacture 2021 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of manufacture: 2021 Operating hours: 7 Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Kledpfx Ajy T E Iasgnjt Theoretical cycle time in idle mode: 25 s Theoretical pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, paper, cardboard Note: The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors that may occur. The offers are subject to change, prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale takes place from our location, without any warranty. Our payment terms are 100% advance payment.

Condition: used, Year of construction: 1973, pressure 28 t distance between columns 510 mm dayligth 380 mm stroke 260 mm weight of the machine ca. ca. 750 kg Klsdpfxsv Svc Te Agnjt

Condition: good (used), Baling press, Schleicher, 16 S – used - : Ex-works price: only €1,950 (net) Manufacturer: Schleicher Model: 16 S Serial number: 6150I1730E Year of manufacture: 20 Height: 2000mm / Width: 1500mm / Depth: 900mm Weight: 1,850kg Ksdpfx Agjyzcwhsnslt 380V, 3-phase, 10.3 AMP, 4kW Condition: good Available: immediately Location: Husum Operating manual not available.

Condition: good (used), Year of construction: 2008, pressing force: 30 t, Baler presses, Bramidan, 4-x 30 SLD, 30 tons pressing force – used - : Kodpfjyzcvwsx Agnslt Price ex location: only €3,950 (net) Manufacturer: Bramidan Model: 4-x 30 SLD Number: PEY297206-3 Year of manufacture: 2008 H: 2300mm / W: 1800mm / D: 1500mm Weight: 1,850kg 3x230/400V, 25/16 Amp, 4kW Condition: good (the photo with the warning tape is simply to indicate that the press is not being used anymore as a new, larger one has been purchased) Available: immediately Location: Husum Operating manual available

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: Straightening plate with support ribs and adjustable feet -Length: 3000 mm Kjdpfx Agoy S Rnijnjlt -Width: 1250 mm -Sheet thickness: 48 mm -Adjustable feet: Ø 300 x 670 mm -Transport dimensions: 3000/1255/H900 mm -Weight: 3500 kg

Condition: good (used), Year of construction: 2013, operating hours: 12,110 h, Just arrived Baling press Paal Konti 325 G, year of manufacture 2013 Technical data: Manufacturer: Paal Type: Konti 325 G Year of manufacture: 2013 Operating hours: 12110 Pressing force: 100 t Drive power: 2 x 55 kW Feed opening: 1020 x 1750 mm Bale dimensions: 750 x 1100 mm, length variable Tying: 5-fold automatic Throughput at: 35 kg/m³ approx. 13.5 t/h 60 kg/m³ approx. 21.5 t/h 100 kg/m³ approx. 33 t/h Bale weight up to 800 kg Transport dimensions approx. 12216 x 2530 x 2800 mm (L x W x H) Kljdpfx Agjy Twt Uenjt Machine weight approx. 28,000 kg Materials: Paper, cardboard, lightweight waste, plastic waste Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors that may occur. The offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without any guarantee or warranty.

Condition: good (used), Year of construction: 2021, operating hours: 245 h, functionality: fully functional, HSM V-Press 860 plus vertical baling press, year of manufacture 2021 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of manufacture: 2021 Operating hours: 245 Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Theoretical cycle time in idle mode: 25 s Theoretical pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: film, paper, cardboard Note: The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any possible errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale takes place at our location, without warranty. Kodjy Tvzdopfx Agnelt Our payment terms are 100% prepayment.

Condition: ready for operation (used), length 6000 mm width 2500 mm total power requirement / kW Without PC and software Dimensions (L×W*H): 6000 × 2500 x 350 mm, without vacuum plate Manufactured according to DIN 876 / class II Ksdpfxjud Il Se Agnslt

Condition: used, total length: 2,500 mm, total width: 2,400 mm, total height: 2,400 mm, Weight: 4.000 kg - Documentation available: No - CE certificate present: No - Drive system: CNC - Press force [ton]: 40 - Max. working width [mm]: 2050 - Column gap [mm]: 2050 - Options: Finger safety guard - Transport dimensions: 2500mm x 2400mm x 2400mm (l x w x h) Klsdpfx Agexwmwbenet - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2011, functionality: fully functional, Available from June 2026 Bale press Presto HPK 50 BS, year of manufacture 2011, with Wirbulator and optional Horstmann chain belt conveyor Manufacturer: Presto Type: HPK 50 BS Year of manufacture: 2011 Drive: 30 kW Pressing force: 50 t Infeed opening: 1600 x 1050 mm (L x W) Channel cross-section: 700 x 1100 mm Infeed volume, max. 1.23 m³ Cycle time: 19 s Binding: 4-fold Throughput at 35 kg/cbm: 6 t/h 60 kg/cbm: 9.6 t/h 100 kg/cbm: 13.9 t/h Bale weight: up to 500 kg Machine dimensions: 8500 x 1700 x 2400 mm (L x W x H) Machine weight: approx. 12,000 kg Data for chain belt conveyor Ksdpjy Ticzefx Agnjlt Manufacturer: Horstmann Type: PK 1100/11 Year of manufacture: 2011 Belt width 1100 mm Speed: approx. 0.2 m/s (max. 0.3 m/s) Loading length approx. 3000 mm Rising section approx. 5000 mm Gooseneck approx. 1000 mm The press is still in operation and can be inspected under operating conditions. It will be available from the beginning of June 2026. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, prior sale is possible, and may be withdrawn at any time. Inspections can be arranged by appointment. The sale is made against prepayment, ex works, without any warranty.

Condition: used, Year of construction: 1980, pressure 100 t stroke 500 mm table surface area 4000x500 mm weight of the machine ca. 5,7 t HY – S 100 RH MAE hydraulic straightening press, complete with straightening unit Year of manufacture: 1980 Kledpfoy Tpr Aex Agnjt Approved in accordance with UVV Stroke: 500 mm Pressure capacity: 100 tonnes Table: 4000 x 500 mm Weight: 5700 kg

Condition: used, plate width 3000 mm plate depth 4000 mm plate height 370 mm no. of flutes 12 flute distance 210 mm Klodpshrrluefx Agnet

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame Klodpfsy R Nnfsx Agnet • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: used, workpiece height max. 2.320 x 1.010 mm Kljdpfx Aow Na Ulegnst output 33 kW Available 2 Stück Orma PM/AFT membrane press for coating single-sided profiled workpieces with automatic loading and unloading system

Condition: used, 1x bending knife from a VOEST press brake Ksdey Tbvmopfx Agnjlt Length: 4050 mm Weight: approx. 120 kg For further dimensions see pictures.

Condition: used, Punching force: 200 kN Thread, for example a 13 mm hole in 12 mm steel Viewfinder via handwheel Kledpormudgsfx Agnet Assortment of tools is included in the price

Condition: good (used), Year of construction: 2011, input voltage: 230 V, Pneumatic corner clamp. Knives for Reynaers systems, included. Kledpfxoy Twnxe Agnet

Condition: excellent (used), Year of construction: 2021, overall weight: 450 kg, input voltage: 230 V, The machine was used for approximately 8 hours per week. All necessary accessories for Reynaers systems (blades) are available. Kodpfx Aoy Twlqjgnolt

Condition: like new (used), Year of construction: 2022, functionality: fully functional, overall weight: 450 kg, input voltage: 230 V, The machine has hardly ever been used. It comes with all the necessary blades for the Reynaers range. Kledpfxjy Tv Rlj Agnot

Condition: good (used), Year of construction: 2005, functionality: fully functional, pressing force: 50 t, stroke length: 215 mm, Hydraulic press brake Manufacturer: TRUMPF, Type: TrumaBend V500 Year of manufacture: 2005 Technical data Manufacturer: Trumpf Type: TrumaBend V500 Year of manufacture: 2005 Capacity: 50 t Working length: 1250 mm Stroke: 215 mm Distance between uprights: 1040 mm C-frame overhang: 420 mm Installation height: max. 385 mm Working speed: 10 mm/s Return stroke speed: 220 mm/s Voltage: 3 x 400V Rated current: 21.5 A Connected power: 8.6 kVA Compressed air connection: 6 bar Dimensions: approx. L 2.00 x W 2.00 x H 2.40 m Weight: 4.9 t Equipment • Trumpf TASC 6000 control system • Pneumatic die shifting • Hydraulic tool clamping, top and bottom, Wila/Trumpf • Controlled axes: Y1, Y2, X, R, Z1, Z2 • Bend-Guard safety light curtain, front • Tool package: - Upper tool 202/K, straight, R1, H 120mm, L = 1,250mm, segmented Kljdpfx Agoy T Hx Tjnot - Lower tool EV/S W6/84°, L = 1,225mm, segmented - Lower tool EV005, W16/30°, L = 1,090mm, segmented - Lower tool V24/80°, L = 1,120mm, segmented All information is without guarantee. A live demonstration is possible at any time in our showroom.

Year of construction: 2026, condition: used, NEW – Year of construction 2026 Automatic loading and unloading station. Kodpfjy S S Htox Agnelt Suitable for solid wood, MDF, gypsum fiberboard, cement fiberboard, and panel materials. Examples: doors, boards, MDF panels, fronts, gypsum fiberboard, facade panels. Adaptations to other products are possible. The machine operates at a constant speed and with a set loading and unloading capacity. This allows you to easily automate your feeding and stacking processes and increase process reliability. The system operates with a 2-circuit vacuum system. Siemens control panel. Technical data: - Manufacturer: Ka-Ma - Type: KR-1300-1 - Working width: 1,300 mm - Including belt conveyor, length 3,000 mm - Working height: 930 +/– 50 mm - PLC control, operation via a touch panel, Siemens S7-1200 - Loading and unloading of parts using 2 suction plates, length 442 mm - Automatic signal after the loading process is completed - Max. horizontal speed: 0.5 m/s - Horizontal working stroke: 1,300 mm - Max. vertical speed: 0.5 m/s - Stack height: approx. 1,000 mm (including pallet under the stack of panels) - Loading side on the left when viewed in the direction of travel - Vertical working stroke: approx. 1,200 mm - Max. lifting weight: approx. 85 kg, continuous operation 65 kg - Max. component width: 1,300 mm - Max. component length: approx. 2,850 mm - Max. conveyor belt speed: continuously variable up to max. 10 m/min - Electrical motor power: 1.5 kW - Electronic components: Schneider Electronics and Siemens - Weight: 1,200 kg Optional: - 2-circuit vacuum system with 4 additional suction cups, which lifts the panels by 15 mm on one side before the vertical movement. This is required for all through-suction materials.

Condition: used, length 700 mm width 500 mm Klodpfjy S D Rwjx Agnet height 105 mm weight 260 kg The electro-magnetic clamping plate is in good, ready-to-use condition. Length: 700mm Width: 500mm Height: 105mm Weight: 260kg We have two identical magnetic chucks with the same dimensions. See S9063

Condition: used, Year of construction: 1994, sheet width 3000 mm plate thickness 16 mm distance between columns 3200 mm throat 310 mm Kodpfx Aoy S D Nmjgnslt stroke 300 mm table width 820 mm table height over floor 1215 mm Number of downholders 12 St. cutting angle 0,5 - 2,5 ° total power requirement 30 kW weight of the machine ca. 19 t Machine was overhauled in 2010 and was modernized with light barrier at table. Machine will be sold with automatic back stop with DRO. including flat belt conveyor

Condition: new, plate width 900 mm plate depth 600 mm plate height 55 mm weight 55 kg dimensions of the machine ca. 900 x 600 x 50 mm Clamping plate 900 x 600 x 55 mm If you have not found your desired size, you can also send us an e-mail with the completed PDF form. With this, we can have a plate made for you individually. Please note that (only) these plates are not symmetrical and not parallel. Number of slots: 3 Distance from edge: 140 mm Ksdpfx Agey S D Ehonolt Slot spacing: 270 mm Slot width: 14 mm Casting quality HT250

Condition: new, plate width 1000 mm plate depth 700 mm plate height 2000 mm weight of the machine ca. 1800 kg required space 1000 x 700 x 2000 mm The GERD WOLFF clamping bracket, with overall dimensions of 1000 x 700 x 2000 Kodpoy S D D Dsfx Agnjlt millimetres, is equipped with a T-slot plate. If you have not found the size you require, you can also send us an e-mail with the completed PDF form. We can use this to produce a customised panel for you. T-slots - width: 22 and 38 millimetres Panel thickness: 50 millimetres Number of grooves: 8 Surface finished according to DIN 876/III Weight: 1800 kg Material: EN-GJL-250 The cast iron grade EN-GJL-250, characterised by lamellar graphite, is characterised by high thermal conductivity, excellent damping properties and good dimensional stability. This material also combines good machinability with high compressive strength and vibration-damping properties. EN-GJL-250 is particularly suitable for mechanically stressed machine components, as it is also easy to machine and has an outstanding surface finish. Clamping cube - T-slot plates - Plate field