Used Hundegger Throughfeed Machining Center for sale (69,883)

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC-Steuerung Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics Bwjdpfex Hn D Rjx Al Asu The machine can be viewed under power by appointment.

Condition: excellent (used), Year of construction: 2004, operating hours: 19,000 h, functionality: fully functional, coolant supply: 40 bar, number of slots in tool magazine: 300, Equipment: documentation/manual, This machine was used solely for precision finishing and is in very good condition. Bwjdoz Hzymepfx Al Asu

Condition: used, Year of construction: 1995, Storage location: Nattheim Bjdpfxowkirqj Al Ajwu

Condition: good (used), Year of construction: 1998, Ref. -No.: 10664 Manufacturer: HEDELIUS Type: BC 100 Performance Year of construction: 1998 Type of control: CNC Control: Heidenhain 426 Storage location: Halberstadt Country of origin: Germany X-Travel: 3500 / 2 x 1450 mm Y-Travel: 1000 mm Bwjdpfx Ajz D Skdjl Asu Z-Travel: 700 mm Tool Taper: SK50 DIN 69871 Numbers Of Tools In Magazin: 30 Turning Speeds: 20 - 5000 RPM Rapid Travel X/Y/Z: 30 mm / min Spindle power: 50 kW Minimum distance between spindle nose and table top: 190 mm Further information: - NC software version: 28047629 - PLC: bc80_426_3:07 - Setup 286197 37 The machine can be viewed while powered on by appointment.

Condition: like new (used), Year of construction: 2023, operating hours: 268 h, functionality: fully functional, controller manufacturer: Siemens Sinumerik one, total height: 2,900 mm, total length: 3,000 mm, total width: 2,700 mm, table width: 550 mm, table height: 510 mm, table length: 550 mm, overall weight: 5,600 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 485 h, spindle motor power: 13 W, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, DMG MORI IoTconnector and NETservice Chip conveyor Renishaw probing kit Coolant spray gun Job Shop package for SIEMENS SINUMERIK ONE Tropical package Option includes: • Active cooling unit for the control cabinet • Additional fan in the operator panel Recommended for ambient temperatures from 35°C up to a maximum of 45°C Tool holder for SK40 DIN69871 Tool holder SK 40 for pull stud DIN 69872 Electronic handwheel External electronic handwheel Software option: DXF import Software option - DXF Import Allows opening DXF files directly on the controller to extract contours and import them into the program. RMS device (Relocation Machine Security) Bodpez E U A Esfx Al Aswu Documentation - 1, German Screen display, German/English

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 620, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Note: The machine is located on the first floor. The main difference between the MTRent MTcut v60 and the MTRent MTcut v60D lies in the inclusion of an additional rotary axis ("D" stands for rotary table or integrated 4th axis for extended machining capabilities). TECHNICAL DETAILS Travel in X-axis: 600 mm Travel in Y-axis: 420 mm Travel in Z-axis: 450 mm Distance from spindle nose to table: 120–570 mm Spindle speed range: 60 – 12,000 rpm Torque: 70 Nm (S6, 40 %) Spindle power: 11 kW (40 %) Spindle cooling: Oil/Air Tool interface: SK40 Pull stud: DIN 69871/72 Table dimensions: 750 × 420 mm Number of T-slots: 5 T-slot width: 14 mm H8 T-slot spacing: 65 mm Rapid traverse X/Y/Z: 32 Feed rate: 1 – 12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool positions: 30 Tool change time: 1.5 s Bjdpszzlhaefx Al Aswu Maximum tool weight: 6 kg Maximum tool diameter: 76 mm Maximum tool length: 250 mm MACHINE DETAILS Control system: Heidenhain iTNC 620 Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air connection: 3/8" Compressed air: 6–8 bar Power supply: 400 V Fuse rating: 63 A Connected power: 25 kVA Coolant tank: 160 l Linear guides X/Y/Z: 30/35/35 mm Machine bed: Meehanite casting Machine weight: 4,000 kg EQUIPMENT Rotary table or integrated 4th axis Heidenhain iTNC 620 CNC control Digital Heidenhain drive technology Ceramic-bearing precision spindle Separate spindle cooling for constant temperature Integrated chip conveyor Maintenance-free Siemens spindle motor THK linear guides in all three axes 30-position tool changer with dual gripper Central lubrication Large access door to the work area Loading option from above using an overhead crane Two waterproof work area lights CE certification • The height and weight of the asset must be considered when selecting the transport vehicle. • A forklift is available for loading. • If the item is not collected on time, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. • The sale is made without any warranty or guarantee. • The information on the technical specifications comes from the original offer. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the item on site before the end of the auction.

Condition: good (used), Year of construction: 2010, functionality: fully functional, Phantomatic T3A incl. swivel device for angled head Machine features: - CamPlus - Barcode reader - Touchscreen - Overlength function up to 8000 mm - 6-sided machining - Swivel device for angled head - Angled head Travel range X-axis (longitudinal axis): 4300 mm Travel range Y-axis (transverse axis): 270 mm Travel range Z-axis (vertical axis): 300 mm Electric spindle 1 HSD – max. 18,000 rpm – power 5.5 kW Bwjdpfx Aoz Adx Hjl Aju Tool magazine capacity: 9 Angular gearbox for side machining, rotatable Number of clamping devices: 4 incl. automatic positioning of the clamping devices Weight: 1,950 kg

Condition: good (used), Year of construction: 2008, Ref. -No.: 10564 Manufacturer: TOYODA Type: FH 630 SX Year of construction: 2008 Type of control: CNC-Steuerung Control: Fanuc 31i - A Storage location: Halberstadt Country of origin: Japan Serial no.: NS2XXX X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 850 mm B-Axis: 360 ° Max. Workpiece Weight: 800 kg Max. Tool Weight: 27 kg Max. Tool Length: 545 mm Max. Tool Diameter: Ø 120 mm Max. Size Of Workpiece Lxwxh: Ø 1000 x 1000 mm Tool Taper: BT - 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 6000 RPM Machine length: 7000 mm Machine width: 3500 mm Weight Of The Machine Ca.: 20,1 t Further information: - Equipped with IKZ and chip conveyor - NC rotary table 360,000 * 0.001° Bwjdpfxoxvw Izo Al Aou Machine can be inspected under power by arrangement.

Condition: excellent (used), Year of construction: 2020, MACHINING CENTER GANNOMAT "PROTEC 0571" working width 1300 mm Drilling, grooving, milling Base machine complete in standard version according to price list 01/19/D: For detailed technical data, please refer to the datasheet for PROTEC Type 0571 - Machining unit with: PowerBlock with 21 spindles and 1 slotting saw (BK 1341) - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y - Milling unit Profit F3 HSK63F with 3-position magazine for automatic tool change, 5.5 kW motor (S1), 1,000–20,000 rpm with frequency converter, clockwise and counterclockwise rotation, tool holder HSK63F with collet 462E, cutter length up to 130 mm. - INCLUDES OPTION: Additional safety device with lamella curtain for processing Lamello P-System. Required for horizontal milling for Lamello P-System with groove cutter Ø 100.4 x 7 x 30 mm. - Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1300 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 263 mm in through-feed mode, max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg. - Air connection: 7 bar Machine No. 435.046 Electrical connection: (400V, 3Ph, 50Hz, (12kVA, 17.5A)) - Pressure device from above for working width 1300 mm - 765 mm roller table (Y-axis), foldable, for machine front, W 500 mm - 765 mm roller table (Y-axis), foldable, for machine rear, W 500 mm - Auxiliary stop 600 mm with integrated rollers for roller tables - Extraction distributor Ø 160 mm / Ø 80-80-80 mm, spacing 196 mm - Documentation in German: Operating manual: GERMAN Programming manual: GERMAN Operator software: GERMAN Operating system: ENGLISH Keyboard: GERMAN Bodpfxow Sguwj Al Aewu Location: ex stock 54634 Bitburg - immediately available -

Condition: repair required (used), Year of construction: 2009, 5-axis CNC machining center – universal – Manufacturer: RÖDERS Machine model: RXP 800 DS Year of manufacture: 2009 TECHNICAL DATA Travels - X-axis (mm): 475 - Y-axis (mm): 600 - Z-axis (mm): 400 - A-axis (swivel table): +/- 95 - C-axis (rotary table): 360 Bwjdpfszt Rd Dox Al Asu EQUIPMENT FEATURES + RC 4 automation + Chip conveyor

Condition: new, functionality: fully functional, Fast universal talent for furniture construction and more 9 controlled axes High axis speeds: 130 m/min / X-axis 75 m/min / Y-axis Bwjdpfx Astu I Ntjl Aju Machining of even the smallest parts (from 70x35 mm) Genuine 6-sided machining 2 automatic, independently controlled clamping grippers Horizontal machining also from the gripper side 3 independent drilling heads with a total of 47 drilling spindles grooving saw unit Milling spindle top and bottom Air cushion table in the infeed and working area Panel return in the outfeed Barcode scanner

Condition: used, Year of construction: 2011, Working size in X-direction: 2770 mm Working size in Y-direction: 1220 mm Working thickness (Z-dimension): 80 mm Machine design: Gantry-type machine Main spindle power: 11.0 kW Main spindle speed: 1500 - 24000 rpm Vector controlled spindle: Yes Clamping system: HSK 63 F Spindle cooling: Air cooling Number of axes: 3 Tool changer: Yes Tool changer positions: 10 Keyboard: Yes Mouse: Yes Programming system: Xilog Plus DXF interface: Yes Online connection possible: Yes CD-ROM drive: Yes Table type: Matrix table Stop system: Stop cylinders Number of vacuum pumps: 1 Vacuum pump capacity: 250 m³/h Safety: Safety tread mats Bwedsvvi Htspfx Al Aju Storage location: Sonnefeld

Condition: good (used), Year of construction: 2008, Vertical machining center Machine type: UVA 1030 plus Control: Heidenhain iTNC 530 Year: 2008 SPECIFICATIONS Travel Bwjdpfjz Dkrtjx Al Aou X-Axis: 1.030 mm Y-Axis: 610 mm Z-Axis: 560 mm Rapid motion: (X/Y/Z): 30 m/min. Max. revolution: 10.000 rpm Spindle power: 13,5 kW Tool: SK40 Tool capacity: 24 Table size: 1.000 x 500 mm Max. Table Load: 700 kg Equipment Chip conveyor Electronical handwheel Caliper Internal cooling: 20 bar

Condition: good (used), Year of construction: 2008, Ref. -No.: 10628 Manufacturer: AUERBACH Type: IA 5B 3200 RT Year of construction: 2008 Type of control: CNC-Steuerung Control: Heidenhain Storage location: Halberstadt Country of origin: Germany X-Travel: 3200 mm Y-Travel: 2000 mm Z-Travel: 1600 mm Rotary Table (Lxw): 2500 x 2000 mm No. Of Working Stations: 60 Machine length: 7300 mm Machine width: 7700 mm Machine Height: 4350 mm Weight Of The Machine Ca.: 28 t Bwodpfxezc D D Ro Al Aou Further information: - with -H / V- head Machine can be viewed under power by arrangement

Condition: used, Year of construction: 2012, x-travel 760 mm y-travel 460 mm z-travel 460 mm control TNC 620 Heidenhain turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 14 / 10 kW Torque 89 / 63,7 Nm tool taper SK 40 table surface area 900 x 410 mm max. table load 350 kg T-slots 4x number of toolpositions 24 pos. max. tool diameter 130 mm max. tool length 200 mm max. tool weight 8,0 kg rapid traverse ( X / Y / Z ) 36 m/min total power requirement 20 kVA weight of the machine ca. 3,3 t dimensions of the machine ca. 3,0 x 2,5 x 2,9 m Bwjdpfx Aszgibuel Asu CNC Machiningcenter Vertical SPINNER - VC 750

Condition: used, Year of construction: 2009, x-travel 2.360/2x 930 mm y-travel 600 mm z-travel 600 mm table surface area 2.750 x 600 mm Control Siemens 840 D spindle tunring speed 30 - 6.000 U/min Bsdpfxez Ek D Ss Al Aowu tool taper SK 50 number of tool places 26 Pos. Number of working hours ca. 50.884 h connected load 69 KVA weight of the machine ca. 20 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Handwheel, Heidenhain HR 410 - Chip conveyor - External belt filtration system Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: good (used), Year of construction: 2002, functionality: fully functional, 3-axis machine Working area: X-axis: 3,000 mm Y-axis: 1,200 mm Height above the top edge of the suction plate: 100 mm 6 work piece supports, each with 2 tubeless vacuum suction cups, each with 1 rear and 1 front work piece stop 1 work piece stop in the Y direction (left and right) 4 lifting rails for placing heavy work pieces, automatically lowerable 1 vacuum pump, 100 cbm/h Machining units: Main spindle, 5 kW Speed: 1,500 - 24,000 RPM water-cooled Rotation direction: left & right Automatic tool magazine with 8 positions moves directly along with the milling spindle for milling tools only Vertical drilling unit with 14 spindles Spindle spacing: 32 mm All spindles can be controlled individually Speed: 6,000 - 9,000 RPM Horizontal drilling/sawing unit 4 spindles Feed stroke: 80 mm Drilling diameter: max. 12 mm Grooving saw diameter: max. 125 mm Unit can be swiveled 0 / 90 degrees Bwodpfx Ajz D A Rbol Aju Control / Software IMAWOP 5.0

Condition: used, Year of construction: 2005, x-travel 880 mm y-travel 630 mm Bsdpfxovn Ur Ej Al Aewu z-travel 630 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 / 82 Nm tool taper HSK-A 63 swivellable B: +30° / -120 ° table surface area Ø 700 / 1.250 x 700 mm max. table load 650 kg rotatable C: 360 ° max. workpiecediameter 850 mm max. workpiece height 550 mm number of toolpositions 32 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool weight 8,0 kg change-time chip to chip 10 sec feed speeds max. 30.000 mm/min rapid traverse 30 m/min Accelaration 5 m/s² total power requirement 48 kVA weight of the machine ca. 14,0 t dimensions of the machine ca. 6,5 x 5,0 x 2,9 m 5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 monoBLOCK - NC-Rotary Table (C-Achse) integrated in rigid-table - Swivel-Milling-Head (B-Axis) - only 6.100h Spindle Hours

Condition: good (used), Year of construction: 1998, Used Kitamura machining centers Type: Mycenter 2X Yasnac CNC control Max. spindle speed: 10,000 rpm Excl. clamping on the table Tool holder: SK 40 Bwedpfx Asy U I H Iol Asu X: 610 mm Y: 510 mm Z: 510 mm Tool changer

Condition: used, Year of construction: 2012, No. 3274 CNC machining center HOMAG PROFI BAZ 222/40/F/K Used, year of construction 2012 Working range X max. 4000 mm Working range Y max. 1550 mm Workpiece thickness max. 300 mm (incl. clamping devices) 5-axis main spindle HOMAG DRIVE5+ Spindle power 15 kW (S6) / 12 kW (S1) Spindle speed 1000 - 24000 rpm Tool clamping system HSK-F63 18-position rotary tool changer Bwsdpfxoy S Edxo Al Asu Pickup station for saw blade Ø 350 mm Drilling head with 21 spindles 17 vertical drilling spindles 2 horizontal drilling spindles in X-direction 2 horizontal drilling spindles in Y-direction Grooving saw swivelling 0° / 90° Edge banding unit HOMAG POWER EDGE 360° edge banding Pre-cutting station 2-position edge roll magazine 2 independent Y-axes for main spindle and edge banding unit Console table with 8 consoles Vacuum clamping devices 2 vacuum pumps, total capacity 2x 100/140 m3/h Control HOMAG powerControl PC85 Programming system woodWOP 6.0 (according to original order configuration) woodWOP Premium package incl. 4 single-user licenses / woodWOP Wizard / woodWOP technology database / woodWOP CAD/CAM Standard interface / DXF interface / woodMotion machining simulation / woodScout diagnostic system / collisionControl collision monitoring / Schuler MDE Basic machine data acquisition Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: used, Year of construction: 2004, machine/vehicle number: IntNr231232, Hermle C600 U, year of manufacture 2004 Spindle new, with commissioning report Control system: - Heidenhain iTNC 530 - Control system operating hours: 68026 - Machine operating hours: 81237 - Spindle operating hours: 12429 Spindle: - Speed: 16,000 rpm - Tool holder: SK-40 - 30 tool magazine positions Equipment: - Rigid clamping table - NC rotary table, 4th axis (iTNC) - Coolant system - Chip conveyor: none - Electronic handwheel (iTNC) - Tool breakage monitoring - Chip flushing nozzle - Foot switch for clamping/unclamping - Hydraulic unit for clamping/unclamping Travel paths: - X-axis (longitudinal): 600 mm - Y-axis (transverse): 450 mm - Z-axis (vertical): 450 mm Table: - Clamping area: 800 mm x 465 mm - Maximum table load: 250 kg Axes: - Axis rapid traverse: 35 m/min - Acceleration: 5 m/s² - Measuring system X/Y/Z: 0.1 µm Dimensions & Weight: - Machine weight: approx. 6.8 t - Machine dimensions (W x D x H): 2.5 m x 2.4 m x 2.43 m The machine can be inspected under power by appointment. Subject to changes, errors in technical data and specifications, and prior sale! Bwedpfxez E Rb Ds Al Aju

Condition: used, Year of construction: 2011, AXES Working area X-Y-Z axes * mm 3050-1300-180 Workpiece length in swivel machining mm 1390 Stroke X-Y-Z axes mm 3460-1735-250 Max. travel speed of the X-Y axes m/min 60 WORKING TABLE Number of workpiece supports and vacuum cups 6 / 2 Standard type Standard End stops / Position 1 / rear Vacuum pump m3/h 90/108 DRILLING UNIT Vertical spindles Std/Number/Speed 1/min 12 (8X-5Y) / 4000 Horizontal spindles Std/Number/Speed 1/min 6 (4X-2Y) / 4000 Integrated slotting/sawing unit in X Ømm/1/min 120 / 6000 Motor power kW (HP) 2.2(3) ELECTROSPINDLE Motor power Std. / Opt. (S6) kW (HP) 7.5(10) / 11(15) Max. speed 1/min 24000 Tool changer mounted on the unit carrier in X 4 positions, pneumatic INSTALLATION Installed power KVA 23÷28.5 Compressed air requirement Nl/min 450 Extraction air requirement m3/h 1900+1900 (3400) Required extraction air velocity m/sec 30 Extraction nozzle diameter mm 150+150 (200) Machine weight Kg 3000 * X Distance between the stops - Y Milling center as reference point; Z Workpiece passage GENERAL FEATURES CNC-controlled boring and milling center, in C-frame design and working table with adjustable workpiece supports and vacuum cups, for performing: - Vertical drilling on the surface of the panel - Horizontal drilling on all four sides of the workpiece - Slot milling with disc cutter in "X" direction - General milling operations Self-supporting structure and working table Structure made of a steel welded construction with the control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or TV supports. Movable unit carrier Box construction made of cold-rolled steel with internal reinforcing ribs, protective devices with bumpers. Working unit Consisting of a drilling head with vertical spindles, horizontal spindles, an integrated slotting and sawing unit and an SCM electrospindle with tool quick-change system type HSK 63 F. Travel paths of the portal and the unit carrier Movement in the X, Y and Z axis takes place on linear prismatic ball-bearing guides with the aid of pre-tensioned linear guides. The power transmission of the X-axis (movable stand) takes place via a pre-tensioned, backlash-free rack and pinion drive with diagonal movement. The movement of the unit carrier in Y and Z direction takes place via pre-tensioned linear guides. The positioning of the working units and the control of the machine functions takes place via "Brushless" three-phase servomotors and digital drives. CNC CONTROL The control unit consists of a numerical control for the milling and drilling machines and a pre-connected personal computer with a graphical user interface "XILOG PLUS". Bedsyymz Uepfx Al Aswu PC -Office- operating system Windows XP - LCD color screen 17 - Qwerty keyboard - Swiveling control panel - Machine interface software Xilog Plus Xilog Plus features Programming - parametric, graphical and ISO programming - Import of DXF and ASCII files - Linear or circular interpolation in three axes, linear in space, spiral in the chosen plane - Supported programming with graphic and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool changes - cycles - Possibility of plate zero-point shift for performing drilling on inclined or curved plate sides - Complete compatibility with CAD/CAM Routocam (SCM) - AlphaCam Integrated additional functions - Calculator for direct transfer of the calculated data.

Condition: used, Year of construction: 2009, Automatic central lubrication Milling unit 7833 2-stage, 11 kW power 1000 - 24000 rpm 1 double drilling spindle in X-direction 1 integrated sawing unit for sawing / grooving in X-direction, traveling Tool changer 7892, 16-way Linear Pick-up changer, permanently installed on the right-hand side of the machine Laser pointer consisting of 2 laser pointers for positioning the vacuum suction cups or tracing the workpiece contour Automatic console - suction cup positioning 6 consoles including 3 suction cup holders per console including 1 vacuum suction cup 80x80 mm per suction cup holder including 4 feeding aids Additional processing fields at the front for 6 consoles Basic unit pneumatics for frame clamping system 7974 (6 consoles) 2D barcode scanner Video camera in the processing head Vacuum pump 140 m³/h Vario tool Change changing unit package consisting of Consists of: Vector axis 7899 (C-axis), fully interpolating, 0-360° continuously rotatable, including pneumatic tool changer 7890, single-slot magazine pick-up system, permanently installed in front of the machine frame on the left. Tool changer 7894, 6-slot pick-up magazine specifically for Vario Tool Change tool holders, permanently installed in the machine frame on the left, can be equipped with a Vario Grip KSJ F 40 collet chuck, 3 Vario Grip KSJ F 40 tool holders (for 2-20 mm ER32 collets), 1 saw blade holder, 3 collets according to customer selection, 1 carbide circular saw blade, max. 220 mm diameter. Bsdpfx Alsvvi Spo Aowu Storage location: Nattheim

Condition: used, Year of construction: 1994, Storage location: Nattheim Bsdowmm Nrspfx Al Aewu

Condition: good (used), Year of construction: 2020, 5-axis CNC machining center - universal - Manufacturer: MAZAK Machine model: Variaxis J-500 Control system: Mazatrol SmoothG Year of manufacture: 2020 Number of controlled axes: 5 TECHNICAL DATA Travel ranges - X-axis: (mm) 350 - Y-axis: (mm) 550 - Z-axis: (mm) 510 - Swivel range A-axis: (degrees) -120 / +30 - C-axis (rotary and swivel table): (degrees) 360 Feed rate X/Y/Z: (mm/min) 8,000 Rapid traverse rates - X-axis (mm/min) 30,000 - A-/C-axis: 10,800 degrees/min Spindle - Spindle speed max.: (rpm) 12,000 - Drive power (ED) 100 / 40: (kW) 7.5 / 11.0 Tool magazine - Tool holder: BT40/CAT40 - Pull stud: Yamazaki ANSI type - Tool positions: 30 - Tool diameter: (mm) 90 - Tool length: (mm) 300 Machine table Swivel rotary table Pallet system - Pallet changer: 2-position - Clamping table dimensions: (mm) 500 x 400 Swivel rotary table - Rotary table diameter: (mm) 500 x 400 - Max. workpiece weight: (kg) 200 Bedpozr Uudjfx Al Aewu EQUIPMENT FEATURES + Internal cooling system 70 bar + Chip conveyor with scraper band + Oil mist extraction + Tool length measurement and tool breakage monitoring + Additional interior lighting + Signal light (3-color) Subject to changes and errors in the technical data and specifications.