Used Hurco Vmx 24T for sale (263)

Condition: ready for operation (used), Year of construction: 1992, A Bridgeport CNC vertical machining center is available. Travel X/Y/Z: 1020mm/510mm/500mm, rapid traverse: 40m/min, feed rate: 10m/min, table dimensions X/Y: 1150mm/490mm, max. table load: 900kg, tool holder: BT40, tool stations: 30, machine dimensions X/Y/Z: approx. 2700mm/2550mm/2450mm, weight: approx. 3800kg. Documentation vorhanden. An on-site inspection is possible. Djdpfx Apoyw Sv Sebocn

Condition: good (used), Year of construction: 2000, pressing force: 15 t, table width: 300 mm, table length: 400 mm, Hydraulic clutch CE-Safety 2e hand opperator system Adjustable stroke / ram  Full set books / drawing / CE-Mark Note in the Neck / Throath machine is repaired ! Only EUR 5500 Dcodpfx Asyc R Nmspbsn Capacity Kg: 15000 Table Length: 400mm Table Width: 300mm Hole in table:150mm Working height:280mm Throat: 2170mm Stroke: 50mm Ram adjustment:4 - 80mm Length: 1500mm Width: 1500mm Height: 2100mm Weight: 1200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: unexamined, input voltage: 220 V, Eccentric press TT, 220V, with lighting and adjustable stroke Dodpfx Aox Dkzdepbscn

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, power: 1.15 kW (1.56 HP), Equipment: CE marking, documentation/manual, SANGIACOMO T15 TECHNICAL SPECIFICATIONS: Press Model: T15 CE Serial Number: 11637 Year of Manufacture: 2003 Djdpfx Apoy Nx Ncjbocn Nominal Force: 150 kN Nominal Stroke: 1.8 mm Adjustable Stroke: 7÷60 mm Stop Position: TDC (Top Dead Centre) Ram Adjustment: 40 mm Stopping Time: 79 ms Strokes per Minute: 165 Safety Distance (1.6 m/s): 127 mm Maximum Die Area: 260 x 360 mm Maximum Shut Height: 226.5 mm Minimum Shut Height: 200 mm Upper Die Mass: 25 kg Flywheel RPM at 1st: 165 Max Insertions at 1st: 70 Installed Power: 1.15 kW Voltage: 400 V Auxiliary Voltage: 24 V Working Air Pressure: 5.5÷6 bar Weight: 630 kg • Work table reconditioned on CNC machine. Complete with user manual, CE conformity certificate, and 6 months warranty (excluding electronic parts). INSTALLED NEW COMPONENTS: • Magnetic safety sensors on guards; • Flywheel bearings; • Electrical panel with touch screen;

Condition: good (used), Year of construction: 2007, For sale: well-maintained Holland Lift aerial work platform. Working height: 14m. Dsdpfxsz Eg Ako Apbecn Rubber pads. Trade-in and transport options available – please inquire. For more information, call or send a message.

Condition: good (used), Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Manufacturer: Paul Müller, single-column eccentric press type ExP 45 Dcedpezytmbsfx Apbon -Pressure capacity: 45 tons -Clutch: Manual operation -Stroke: adjustable 4 - 80 mm -Table size: 465 x 690 mm -Table cutout: 220 x 175 mm -Protrusion: 230 mm -Punch hole: Ø 38 mm -Insertion height 300 mm -Dimensions: 1300/950/H2050 mm -Weight: 2220 kg

Condition: excellent (used), Pressure: 10 tons Table size: 500x280 mm Dodpfx Aemnnqkepbocn Stroke length: 155 mm

Condition: good (used), Year of construction: 2000, Capacity Kg 15000 Table Length 400 mm Table Width 300 mm Hole in table 150 mm Working height 280 mm Throat 2170 mm Stroke 50 mm Ram adjustment 4 - 80 mm Hydraulic Clutch CE-Safety 2e hand opperator system Adjustable stroke / ram  Full set books / drawing / CE-Mark Length:1500mm Width:1500mm Dcsdpfxeyc R Uis Apbsn Height:2100mm Weight:1500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), functionality: fully functional, Offered is a knee lever press/foot press including a set of calibration tools. The machine was used in the manufacture of wedding rings. The calibration tools have European ring sizes from 82-39. The press and the tools are used, but in fairly good condition. The press weighs approx. 150 kg. Dcjdpfevy Dutjx Apbsn

Condition: good (used), Year of construction: 1964, Pressing force: 5 t Stroke adjustable: 8 - 50 mm Ram adjustability: 25 mm Weight: approx. 500 kg Accessories / Special features: • Adjustable table Dcedpfxoy D Abfj Apbon • Foot release Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, empty load weight: 3,570 kg, maximum load weight: 10,030 kg, overall weight: 13,600 kg, axle configuration: 2 axles, first registration: 10/2017, loading space length: 6,300 mm, loading space width: 2,470 mm, suspension: other, tire size: 205/65R17,5 ---/124J, color: other, gearing type: other, front tire size: 205/65R17,5 ---/124J, rear tire size: 205/65R17,5 ---/124J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading height approx. 820 mm, 10 x lashing eyes, , --  Subject to printing errors, mistakes and changes, Sample images --, More information at: !, More details: ! Dcedsz Ndmhopfx Apbon

Condition: good (used), Pressing force: approx. 10 tons Table size: 500 x 300 mm (W x D) Pedal size: 110 x 105 mm (W x D) Installation height: approx. 150 mm (large stroke at the top) Stroke: 5...29 mm Pedal adjustment: 25 mm Other • Rotating wedge coupling • Foot release • Control and protective screen as new, only used very little • Without table Dcodpfx Aovnrhwjpbjn

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 12501, functionality: fully functional, pressing force: 10 t, table width: 222 mm, table length: 322 mm, overall weight: 450 kg, installation height: 197 mm, ram adjustment: 30 mm, stroke adjustment: 42 mm, Used San Giacomo eccentric press T 10V CE in very good condition, with a base frame for pallet truck transport. Further details available upon request. Dcjdpfox A Ah Tox Apbjn

Condition: like new (used), 24000 kg length 5000 mm width 2500 mm Dsdpexcuyusfx Apbscn loading area height 700 mm

Condition: reconditioned (used), Year of construction: 2018, overall weight: 30,000 kg, Doppstadt DW 3060K Biopower Type F M Shaft - Year of manufacture: 2018 - Engine: MTU R61300 with 490 hp - AD BLUE Dedpfx Aezx Rz Tepbecn - Weight: 30,000 kg - Remote control - Humidification system - Rear conveyor belt 7m - Over-band magnet - Track chassis - Central lubrication system - Limiter - Roller: M 3000mm x 800mm - Teeth: 124 The machine is in its original condition, not repainted, only workshop-reconditioned.

Condition: used, maximum load weight: 33,481 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 03/2010, next inspection (TÜV): 03/2027, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, total length: 14,000 mm, total width: 2,600 mm, Year of construction: 2010, Cooling unit brand: Thermo King Additional information: * Maximum axle load | First axle: 9,000 kg * Maximum axle load | Second axle: 9,000 kg * Maximum axle load | Third axle: 9,000 kg * Position | First axle: Rear * Lift axle | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Lift axle | Third axle: Yes Additional equipment: * Rear doors * Homepage * Tail lift * Lift axle * SemCollection * SemStars Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | We kindly request that you inquire about the costs and procedures for your respective country in advance. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale, and errors. Djdpfxsz Hhu De Apbscn The prices quoted exclude BPM and apply only to exports.

Condition: good (used), Year of construction: 1994, pressing force: 25 t, working width: 1,200 mm, working range: 1,200 mm, High Quality Used AMADA PROMECAM ITS2 25-12 1.2metre x 25ton cnc pressbrake for sale Year 1994 Specification 25 TONS X 1250 HYDRAULIC UP STROKING 3 AXIS CNC PRESS BRAKE COMPLETE WITH HURCO AUTOBEND 7 CNC CONTROL description TYPE HYDRAULIC UPSTROKING CONTROL HURCO AUTOBEND 7 BENDING PRESSURE 25 TONS BENDING LENGTH 1250 STROKE LENGTH 100 TABLE WIDTH 60 NO. OF AXIS 4 AXIS CONFIGURATIONS Y X AND R Dcsderhirzopfx Apbon SIDE FENCING REAR INTERLOCKED

Condition: used, empty load weight: 6,820 kg, maximum load weight: 32,180 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 10/2017, next inspection (TÜV): 09/2027, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 91 m³, total length: 13,620 mm, suspension: air, tire size: 385/65 22,5, tire condition: 80 %, color: blue, Year of construction: 2017, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference no. for inquiries: 41577 Koegel, Tautliner * Year of manufacture: 2017 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension * Used tarpaulin * Edscha / Sliding roof cover * Load securing certificate DIN EN 12642 Code XL * VDI 2700 EN 12195 * Lashing eyelets in the outer frame (Multilock outer frame) * DCE 9.5 Daimler Chrysler certificate * Portal door * Air connection, coupling head (red + yellow) * Spare tire holder * Connecting plug, 2x7-pin * Connecting plug, 15-pin * Lifting and lowering device * Storage box / Toolbox * Document box * Suitable for rail transport - can be lifted by crane * Inspections: MOT / Emissions test valid until 09.2027 * Suspension: Air * Gross vehicle weight: 39,000 kg * Unladen weight: 6,820 kg * Payload: 32,180 kg Dcodpfx Ajz Hiufopbon * Permissible gross vehicle weight: 39,000 kg * Axle manufacturer: BPW * Tire condition 1st axle: 70% - 60% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 80% - 80% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 90% - 90% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Internal dimensions: L = 13620 mm, W = 2480 mm, H = 2700 mm * Internal volume*: 91 m³ * Pallet spaces: 34 Disclaimer: Subject to changes, prior sale and errors. You can find more pictures and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Quick and uncomplicated financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Transportation of commercial vehicles Please ask our trained specialists, we will be happy to advise you.

Year of construction: 1980, condition: good (used), machine/vehicle number: 3253-80, Offer 22045 Approximate technical data: - Pressing force 10 t - Overhang 150 mm - Table size 520 x 320 mm - Adjustable table height 160 mm - Through-hole in the table 165 x 125 mm - Overall installation height 220 mm - Ram area 240 x 150 mm - Dowel hole in the ram 30 mm - Ram adjustability 40 mm - Stroke adjustment 4 - 60 mm - Stroke rate 130 1/min - Hydraulically actuated clutch Dedpfx Ajktg Dhopbecn - Two-hand operation - Electric foot switch - Separate control cabinet - Drive 380 V / 1.1 kW - Space requirement approx. W 1000 x H 1800 x D 1100 mm - Weight approx. 1300 kg

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT34002026850, empty load weight: 5,875 kg, maximum load weight: 33,125 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2020, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 75 %, color: silver, - Chassis: semi-trailer, general haulage - Fine-grain steel welded frame, fifth-wheel plate with replaceable 2" kingpin - Slightly tapered outer frame, new design, "Load-Lock-Profil" for strap lashing - 24t 2-speed landing legs, single-side operation, straight foot, no shift compensation - Note: rear corner clearance / swing radius approx. 1930 mm - Rear pull-out ladder - 2 side door retainers - 2 wheel chocks with holder - Aluminium side impact protection - Galvanised steel rear underrun protection - Quarter-shell mudguards front/rear of axle unit - EC anti-spray flaps on 3rd axle - Rear corner impact protection Dsdpszzkrdsfx Apbecn - 1 lockable plastic toolbox, 600x425x460 mm # Axles & Suspension - 3x BPW drum brake axles - Axle/chassis laser-aligned - lower tyre wear & fuel use - Air suspension - Axle 1: auto lift axle, forced lowering, traction assist via "3x brake pedal" (active up to 30% axle overload, max. 25 km/h) # Braking System - 2-line air brake system - Colour-coded lines for easy servicing - Spring-loaded parking brake - 2 mismatch-proof coupling heads, front, no hose - 24V EBS with front socket, no cable - Caution: tow only with tractor units ensuring ABS effectiveness! - Raise & lower valve - Vehicle stability system # Wheels & Tyres - 385/65 R22.5" - Steel wheels, factory silver # Electrics - 24V multi-chamber lamps, yellow LED side markers - 2 white LED front position lamps - 2 white/red outline marker lights, rear - 2x 7-pin mismatch-proof front sockets, no cable # Floor - Screen-printed plywood approx. 30 mm, longitudinal bearers, forklift axle load up to 7,100 kg # Front Wall / Front Corner Posts - 2,580 mm high, box-section steel corner posts, front curtain release, "Crash-Blocker", steel impact guard approx. 140 mm high, lower inside # Centre Posts - 3 pairs sliding posts, full-length adjustable, 4 insertion pockets + long bottom pocket (bottom pocket omitted with side boards) - 3 pairs of post positions # Insertion Slats - 5 rows of aluminium insertion slats # Rear Wall / Rear Corner Posts - Steel rear corner posts to roof edge, curtain fixing with round tube & tensioning ratchet - 2-leaf rear barn doors, each with 2 internal rod locks # Curtain - Curtain with welded-in horizontal/vertical straps - Stainless steel tensioning locks # Roof - Sliding roof, rear bow lifts up, curtain slides rear-to-front, L-section roof rail (automotive-grade), internal width approx. 2,490 mm, white curtain - Non-elastic roof, minimal roof rail deflection when loading - Optimised rain channel at rear, above doors on end bow # Operating Notes - When forming a combination, observe the legal max. overall vehicle height! - If overall height exceeds 4,000 mm, note the following: - The haulier is liable for any damage incurred. - The delivery driver must obtain their own permit under § 29 StVO - We accept no liability for vehicle delivery/transfer. # Country of Registration / Plates - Germany - DEKRA inspection & report (per §13 EC-FGV) - 24/7 service hotline - Fliegl body-strength certificate to EN 12642 XL (payload up to 27,000 kg) - Prepared for single-row plate holder - Warning plate per ECE-70 - Reflective strips: white, continuous along bottom of side curtains, top corners (with side boards fitted: strip at bottom, on boards) - Reflective strips: red, all around rear doors

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 1,400 kg, input voltage: 400 V, total length: 1,150 mm, total width: 900 mm, total height: 1,910 mm, 16T OPEN BACK ECCENTRIC PRESS Professional 16-ton eccentric press designed for punching, stamping, bending and forming metal components. The open back frame construction provides easy access to the working area and comfortable machine operation. The rigid and durable construction ensures stable operation even during intensive industrial use. The machine is equipped with a dry pneumatic friction clutch and modern safety systems. Main machine features: • Open back frame design • Rigid and durable construction • Fixed working table • Transversely mounted crankshaft • Horizontally mounted crankshaft • Dry pneumatic friction clutch • Lifting balance device • Safety valves • Manual control • High production efficiency TECHNICAL SPECIFICATIONS: • Pressing force: 16 t • Stroke under load: 2 mm • Slide stroke: 0–70 mm • Number of strokes: 125 strokes/min • Maximum die height: 170 mm • Distance from slide block to frame: 170 mm • Working table dimensions: 320 × 480 mm • Table hole diameter: Ø100 mm • Opening dimensions: 160 × 240 × Ø210 mm • Slide dimensions: 180 × 200 mm • Shank hole size: Ø40 × 60 mm • Distance between columns: 220 mm • Table thickness: 60 mm • Maximum tilt angle: 25° • Motor power: 1.5 kW • Machine dimensions: 1150 × 900 × 1910 mm • Weight: 1400 kg Equipment: • Light curtains • Mechanical guards • Ejector in lower table Delivery conditions: • Delivery to customer possible • Shipping cost calculated individually • Brand new machine • 12-month warranty • Warranty and after-sales service • CE declaration of conformity Additional delivery information: • Delivery can be arranged throughout Europe Dedpsyrr E Iofx Apbjcn • Shipping cost calculated individually depending on customer location • Fast order processing • Personal collection possible • Machine professionally secured for transport

Condition: good (used), Year of construction: 1988, pressure 15 t throat 180 mm stroke 6 - 60 mm no. of strokes 145 Hub/min ram adjustment 40 mm table surface area 400 x 270 mm hole in the table 100 mm ram surface 120 x 100 mm dayligth 250 mm total power requirement 1,1 kW weight of the machine ca. 1150 kg Djdpfx Apet Tqgljbocn dimensions of the machine ca. 0,96 x 1,34 x 1,88 m

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, turning length: 503 mm, turning diameter: 190 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 135 mm, travel distance Z-axis: 503 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 16 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 40 m/min, type of input current: three-phase, torque: 75 Nm, overall weight: 6,200 kg, spindle nose: A2-5, CNC Lathe NAKAMURA-TOME WT100 TECHNICAL CHARACTERISTICS: Year of manufacturing: 2012 CNC control: FANUC 31i-B Distance between spindles: 735 [mm] Max. cutting diameter: 190 [mm] Max. turning lenght: 503 [mm] Stroke Y axis: -31 / +31 [mm] Stroke Z1 axis: 503 [mm] Stroke X1 axis: 135 [mm] Stroke Z2 axis: 503 [mm] Stroke X2 axis: 135 [mm] Rapid traverse rate X1 axis: 16000 [mm/min] Rapid traverse rate X2 axis: 16000 [mm/min] Rapid traverse rate Z1 axis: 40000 [mm/min] Rapid traverse rate Z2 axis: 40000 [mm/min] Rapid traverse rate Y axis: 6000 [mm/min] Spindle nose: A2-5" Max. bar diameter in turning spindle: 42 [mm] Spindle throughbore: 56 [mm] Max. spindle speed: 6000 [rpm] Increment C-axis: 0.001 [°] Spindle power: 11 [kW] Spindle torque: 75.4 [Nm] Counter spindle nose: A2-5" Counter spindle throughbore: 56 [mm] Counter spindle stroke: 525 [mm] Max. counter spindle speed: 6000 [rpm] Counter spindle increment C-axis: 0.001 [°] Counter spindle power: 11 [kW] Counter spindle torque: 75.4 [Nm] Max. tool holder cross-section: 20 x 20 [mm] Number of tool stations - Turret 1: 12 Number of tool stations driven - Turret 1: 12 Max. speed driven tools - Turret 1: 6000 [rpm] Dcsdszhvwlopfx Apben Number of tool stations - Turret 2: 12 Number of tool stations driven - Turret 2: 12 Max. speed driven tools - Turret 2: 6000 [rpm] Live tools power: 7.1 [kW] Total power required: 55.2 [kVA] Supply voltage: 400 [V] Weight: 6200 [Kg] INCLUDED EQUIPMENT: x1 IEMCA BOSS 545 E Type 32 L bar feeder (3 m bar capacity) x1 SMW-AUTOBLOK Mario Pinto PPBE-42 A5 collet chuck (S1 spindle) x1 Collet chuck (S2 spindle) x4 Radial driven tool holders x2 Axial driven tool holders x16 Static tool holders x1 Foot pedal control for chuck open/close x1 Parts catcher on upper turret with conveyor belt x1 Chip conveyor x1 Automatic lubrication system x1 Three-color status indicator lamp x1 Transformer x1 USB memory stick for parameter backup Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine tool similar to turning and milling centers, machining centers and milling machines, including brands such as Schaublin, Index, Mori Seiki, Traub, Tsugami, Star, Tornos, Biglia, Nakamura, Miyano, DMG and Mazak. CNC lathe, CNC turning center, CNC turning machine, machining center, CNC milling machine, CNC machining center, Fanuc, iTNC, TNC, Heidenhain, Mori Seiki, Mazak, Hurco, Nakamura, Takamura, Hardinge.

Year of construction: 2023, condition: new, pressure 20 t throat 155 mm stroke 6-60 mm no. of strokes 84-210 Hub/min ram - range of adjustment 50 mm Dcsdpfsp Ududsx Apbon 300 mm table surface area 300x450 mm table height 840 mm hole in the table Ø 90 mm ram surface 190x278 mm tool hole in ram Ø 25 mm total power requirement 1,5 kW weight of the machine ca. 1,0 t dimensions of the machine ca. BxTxH 1100x1100x1900 mm

Condition: used, functionality: fully functional, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2017, loading space length: 13,360 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, suspension: air, color: white, Equipment: ABS, Schmitz Cargobull SKO24 Frigo Deep-Freeze Trailer, Blumenbreit ///// !!! Interior wall on the left side damaged // Doors damaged !!! ///// Schmitz axles with disc brakes Lift axle Air suspension, raise/lower function Dsdoyml Ryopfx Apbscn Schmitz S.CU Diesel/Electric Operating hours: Diesel 5,491h / Electric 615h Temperature recorder Fully insulated 45mm wall thickness Pallet box 1x 15-pole 24V power connection 2x 7-pole 24V power connections ABS/EBS Aluminum rims, Alcoa Cargo space dimensions: L 13.36m, W 2.49m, H 2.65m Tires: 385/65 R22.5 Tread depth: 1st axle, left 7mm, right 12mm 2nd axle, left 15mm, right 15mm 3rd axle, left 7mm, right 8mm