Used Lcd Monitor for sale (5,222)

Condition: new, mileage: 1,200 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 4,325 mm, overall weight: 5,500 kg, first registration: 01/2026, emission class: euro6, color: black, suspension: steel-air, tire size: 205/75r16c, number of seats: 21, Year of construction: 2025, Equipment: ABS, additional headlights, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, parking heater, power assisted steering, soot filter, summer tires, traction control, Minibus Mercedes Benz Sprinter 519 CDI HD Tourism - Euro 6 - 19+1+1 VIP seats Engine output 190 HP Euro VI 9G-TRONIC automatic transmission Metallic paint MB 9197 Obsidian Black Dimensions: 200 x 320 x 770 cm ABS, ESP, ASR, EBD Original MB 3rd brake light Light sensor & Crosswind Assist Digital tachograph EG - VDO original MB Speed limiter 100 km/h original MB Rain sensor Pre-installation for retarder Cruise control Alternator 14 V / 250 A - original MB Height and tilt adjustable multifunction steering wheel Podiums under the seats and last row elevated Rear air suspension Anti-corrosion underbody protection Doors and windows: Electric glass entry door with recessed step Luggage compartment lid Large panoramic front window with electric sunblind High panoramic double glazing, tinted Upper rear window Electric window lifters Electrically adjustable and heated exterior mirrors Luggage compartments and extension: Recessed luggage compartment with lid & side compartments left and right Luggage compartment capacity 4.1 m³ Luggage compartment lighting Seats and interior features: 19 Bus Comfort 4020 VIP seats, adjustable (backrest + side), with Top Flair seat and backrest, and adjustable/foldable comfort headrest 2- and 3-point seatbelts Seat nets Tables with cup holders Footrests 5 double seats on left side 5 single seats on right side 4 seats in last row Comfort floating driver's seat, original MB Tour guide seat Original MB armrest for driver's seat Original MB seat heating for driver's seat Original MB comfort headrest for driver's seat Air conditioning, heating, and lighting: Original MB auxiliary heater 5 kW 2 convectors with boosting pump & fans Original MB driver's air conditioning 7 kW VIP service sets with reading lamp and air vents Luggage racks with air ducts and lighting (2 colors) Passenger cabin air conditioning SPHEROS VALEO 13 kW LED ceiling lights LED at entrance step LED on podiums LED lighting between windows LED lighting below windows Interior trim: Interior trim + thermal and sound insulation in passenger compartment Window surrounds Thermal and sound insulation Ceiling in Alcantara Anti-slip PVC flooring in wood or marble look Grab pole behind driver Curtains Dashboard with graphics Armrest finishing in graphic style Accessories and interior features: Ijdpfxey D Sf Tj Ag Uoic Radio CD, MP3, DVD player with microphone and amplifier MBUX multimedia system with 7-inch touchscreen Dynamic gooseneck microphone 19'' LCD monitor Reversing camera 12 dual USB sockets Dual USB socket for driver Refrigerator under dashboard Digital clock and thermometer Main switch for additional installations Accessories and exterior features: LED headlights Fog lights with cornering light Reversing warning system Chrome wheel covers Other features: COC (Certificate of Conformity) Fire extinguisher Lettering, stickers, and decals MB service booklet Emergency exits / roof hatch as emergency exit Emergency hammers Available immediately

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 4,140 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 275 mm, number of axes: 5, This 5-axis BIESSE Rover A 1242 was manufactured in 2021. It features a working range of 4140 mm in the X-axis, 1270 mm in the Y-axis, and 275 mm in the Z-axis. The machine is equipped with brushless motors and a PC-based control system for enhanced performance. If you are looking to get high-quality CNC wood machining capabilities, consider the BIESSE Rover A 1242 machine we have for sale. Contact us for further details. • Working range • Y (5-axis): 1270 mm • Y (4-axis): 1260 mm • Z (with H=74 mm vacuum modules): 230 mm • Z (with H=29 mm vacuum modules): 275 mm • Axes and drives • X & Y: Rack and pinion drive; accuracy class 6 • Z: Ball screw with preloaded nut; accuracy class ISO C7 • Motors: Brushless motors with digital drives via Mechatrolink system • Control system and PC hardware • Control: BH660 (PC-based) with WRT (Windows Real Time) technology • CPU: Intel Core i5 or higher • RAM: 16 GB • Storage: 256 GB SSD or higher • Monitor: 21.5-inch LCD color screen • Operating system: Windows with real-time process management extension • Connectivity: Ethernet card; USB ports • Electrical and pneumatic • Power supply: 380 / 400 / 415 V – 50/60 Hz • Control voltage: 24 V DC (stabilized power supply) • Cabinet cooling: Air conditioning system for operation up to 40°C (104°F) • UPS (uninterruptible power supply): 7–10 minutes runtime for data protection • Workpiece support (ATS system) Iisdpfx Agjyt Rrve Usc • Workpiece supports: 8 ATS aluminum supports on linear guides • Module carriers: 24 carriers (132 × 132 × H41.5 mm) with pneumatic clamping • Set-Up Assistant (SA): Manual positioning with LED indicators; ±1.5 mm precision • Vacuum zones: 2 independent work areas in X; 2 independent clamping areas in X • Software and licensing • Primary software: NC-HOPS 7 MacroCAM • Safety and maintenance • Safety system: Bumper system (front and rear) for immediate stop upon collision • Protection: Polycarbonate transparent front plate and sound-absorbing cover • Lubrication: Automatic lubrication system for linear guides and rack/pinion Additional equipment • Vacuum pumps (supported/optional): Up to two units, 90/100 m³/h or 250 m³/h each

Condition: ready for operation (used), Year of construction: 2018, number of axes: 3, This 3-axis Coord3 ARES NT-L 10.7.5 CNC was manufactured in 2018. It features a high-precision RENISHAW PH20 motorized indexing probe head, RENISHAW UCC controller, and a robust aluminum alloy frame. The machine includes a black granite worktable with threaded holes for secure workpiece fixation. Ideal for detailed 3D measurements with a maximum speed of 500 mm/sec and acceleration of 1700 mm/sec². Contact us for further details regarding this machine. Additional equipment • Air-cooled drying system Iodpfxeyaiz No Ag Usic • CE compliance certification • Equipped with an air filter and regulator system • High-precision RSF optical scales and sensors Machine Benefits Technical Machine Benefits • Air cushion bearings for structure support and increased measurement accuracy • Pneumatic counterbalance for the vertical probe holder • Automatic fall protection for head in case of air outage • All geometric and measurement checks executed under stable temperature conditions (20°c) as per iso 10360/2 standards • Resolution: 0. 0001 mm • Measurement accuracy: iso 10360/2 mpee = 2. 1 + 3. 0l/1000 μm • Maximum speed in 3d measurement: 500 mm/sec • Acceleration in 3d measurement: 1700 mm/sec² Extra Information Control Unit RENISHAW UCC controller kit TouchDMIS measurement software DELL AIO computer with 24” LCD TouchScreen monitor Tools RENISHAW PH20 motorized probe head 3 RENISHAW TP20 magnetic probe modules RENISHAW TCR20 probe changer RENISHAW 23-piece stylus kit 25 mm diameter ceramic calibration sphere with certification Mount Position (Assembly) Machine frame made from aluminum alloy Slide surfaces hardened with a special process Black granite worktable with high wear resistance and threaded holes

Condition: reconditioned (used), functionality: fully functional, Refurbished, automatic leveling wide belt sander suitable for calibration and sanding of solid wood. The CB 1030 belongs to the higher class of automatic wide belt sanders, distinguished especially by its very robust and rigid machine frame and excellent sanding quality. Iiedpfxsxgq Nae Ag Uoc Equipped with 2 units: roller + roller and platen with a shared 11 kW motor: 1. Calibration roller with hard rubber 2. Sanding roller with soft rubber + mechanically adjustable sanding platen Sanding width: 1030 mm 2 feed belt speeds Motorized thickness adjustment + fine manual tuning LCD display of working thickness Ammeter for monitoring motor load Automatic workpiece thickness measurement Worktable lift on four screws Pneumatic oscillation (6 bar), electronically controlled Infeed and outfeed table extensions Required extraction: approx. 3500 m³/h The machine is fully overhauled, set up, and tested. Price: 5,300 EUR

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, The BS-25 concrete block making machine is an excellent solution for plants producing concrete blocks, bricks, paving stones, and bims, offering high efficiency and flexible production capabilities. Developed in line with modern production concepts, this machine can easily produce various products such as paving stones, curb stones, and hollow blocks using different molds thanks to its single-layer structure. Thanks to its scalable facility structure, investors can quickly and economically increase their production capacity according to their needs. The BS-25's fully automatic PLC control system allows a single operator to manage the entire production process. The touchscreen LCD control panel offers the ability to monitor and print production data in real time with its user-friendly interface and advanced reporting system. With its remote access feature, the system can be controlled via LAN or internet connection, allowing for easy detection of potential malfunctions and remote software updates. This smart automation technology ensures consistent quality and maximum production in every shift. BS-25 - Concrete Block Machine Technical Specifications Production Capacity: 110–120 pallets/hour Pallet Size: 1,200 x 980 x 230 mm Control: PLC Automation System (Schneider) Iijdpoxp Uursfx Ag Usc Bunker Capacity: 1.5 m³ Hydraulic Oil Capacity: 500 liters Upper Vibration: 3 kW x 2 Lower Vibration: 4 kW x 4 Total Electrical Requirement: 150 kW Total Vibration Power: 30,000 Production Capacity in 8 Hours: 10,000 concrete blocks / 25,000 interlock blocks Why Should You Choose the BS-25 Concrete Block Machine? CONSTMACH stands out in the production of concrete block, brick, and paving stone making machines with its reliability, engineering quality, and after-sales support. The BS-25 model reduces your production costs while increasing your capacity with its energy-efficient design, long-lasting components, and smart control system. Each machine is delivered after passing quality control tests and can be customized upon request. For investors seeking high durability, minimal maintenance requirements, and world-class production performance, the BS-25 is a symbol of long-term profitability and reliability. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: like new (used), Year of construction: 2018, operating hours: 9,251 h, functionality: fully functional, type of input current: three-phase, We offer this used Haas ST-10 CNC turning-milling center, year of manufacture 01/2018. Iodpoy D Eprsfx Ag Usic Serial number: 3109692 On timer: 9,251 h Cut in move timer: 2,484 h Max. capacity: 14" x 16" (356 x 406 mm), 1.75" (44 mm), 16.25" (413 mm) bore, 15 hp (11.2 kW) vector drive, 6,000 rpm, A2-5 spindle, 6.5" (165 mm) chuck, 12-position bolt-on turret, 15" color LCD monitor, Memory lock switch, expanded memory, USB port Direct tapping, synchronized tapping, Automatic tool probe, Swarf conveyor, Hydraulically operated tailstock, Oil mist extraction, Haas Visual Quick Code, 12-piece holder set. If you have any further questions or need more information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2018, The machine has never been broken, the accuracy is according to the tables, used in 1 shift. > CNC Vertical machining center, 762 x 406 x 508 mm (30" x 16" x 20"), taper ISO 40, > vector drive 30 hp (22.4 kW), 8100 rpm, direct drive "inline", 20 position carousel tool changer, rapid feeds 1000 ipm (25.4m/min), power failure detection module, WiFi connection, software memory 32 GB, 15" color LCD monitor, USB port, memory lock switch, direct threading and 55-gallon (208 L) cooling system > 32GB Extended memory allows you to store, run and edit large programs directly on the machine. > The tool changer on this machine allows the use of CAT tool holders, DIN-69871-1 and ISO-7388/1. > Allows data to be transferred between the Haas machine and a network or computer via ethernet interface. The high-speed data transfer in DNC mode files at up to 1,000 blocks per second. > HaasConnect allows you to monitor your Haas machine remotely. Isdpfxsikl U Ae Ag Ujic > The Haas M130 Media Display M-Code feature is an operator communication tool machine and programmers with the Haas control system while the program is running. Use code M130 to call up setup instructions, tool lists, CAD images, machining information and more. > Synchronized threading eliminates the need for expensive shims thread holders and prevents deformation of the lead thread and the beginning thread. > Lateral tool changer, ISO 40 taper, 24+1 tools > Machines ready for spindle center cooling are preset to allowed for the installation of a Haas spindle center cooling system. > Variable flow coolant pump. Allows checking coolant flow and pressure using the P values of the M-code. > The WiFi option provides a wireless link between the Haas control system and local network. > Haas window blowing > advanced kit: Includes wireless probe system, screw chip conveyor and coolant maintenance package.

Condition: excellent (used), functionality: fully functional, Commissioning: as Okuma stock machine 09.2017 Control OSP P300S Machine Equipment ▪ Enlarged main spindle KK size 11 Front bearing Ø 160 mm Speed range 3,000 rpm Bore Ø 112 mm Motor with 32 kW output Torque 955 Nm ▪ Hollow clamping cylinder Ø 127 mm SMW VNK 320-127 with bore Ø 127 mm ▪ Pressure reducing valve Adjustable range 8-70 bar ▪ Tailstock ▪ Turning length approx. 1500 mm ▪ H1 turret (1 station) ▪ Y-axis ▪ B-axis 0.001° ▪ 40-station tool magazine ▪ Additionally: lower turret with 12 stations ▪ Tool spindle 12,000 rpm ▪ Hinged belt chip conveyor: high-performance chip conveyor with low-maintenance self-cleaning function ▪ Drum sump filter TMF300 with clean tank 980 l ▪ Supply pump TC160/740, 8 bar ▪ Supply pump RSP 20/32-070-1-1-0, 70 bar ▪ Self-centering steady rest on the lower turret (not possible in combination with driven tools for the lower turret) ▪ Automatic door ▪ Robot interface type E for connecting other loading and unloading systems to single-spindle machines ▪ 3D machine model for simulation in a CAM system Technical Details ▪ Main drive (Okuma motor spindle): 22 kW / 700 Nm / 50–4,200 rpm Spindle nose KK size 8 Front spindle bearing Ø 140 mm Spindle bore Ø 91 mm Speed range: 2-stage Range switching at full speed ▪ Lower turret: 12 stations In ZB-axis with cylindrical roller guide In XB-axis with slide guide ▪ Real-time collision avoidance system CAS ▪ 19" color LCD TFT (1280x1024) with 3D color graphics as touchscreen/panel with vertical display and tiltable keyboard (adjustable angle) ▪ Second operating system Windows 7 for operation and data communication, open and freely usable for Windows 7 compatible applications ▪ Programmable tailstock on W-axis with hydraulic quill ▪ Tool magazine 40 stations ▪ C-axis 360° Positioning in 0.001° steps ▪ Y-axis with travel +150/-150 = 300 mm ▪ B-axis 240° Positioning in 0.001° steps ▪ Tool spindle (Okuma motor spindle): 22 kW / 120 Nm / 12,000 rpm ▪ Internal coolant supply for rotating tools, pump with max. pressure 20 bar Including bag filter, external cooling tool spindle, pump with max. pressure 3 bar ▪ Tool system HSK-A63 ▪ Tool monitoring system for tool life and breakage ▪ Tool measurement system (with standard chuck) for safe setup ▪ Machine management MacMan with integrated BDE (operating data acquisition) ▪ Parts program memory 2 GB ▪ Max. length individual part program 2 MB ▪ 2 USB 2.0 ports ▪ Ethernet interface with browser and DNC-T1 for program transfer ▪ Harmonic speed oscillation via periodic speed change ▪ Tool height correction in Y-axis for turning tools ▪ Circular thread milling X/Z/Y/B (helical interpolation) Iiedpfx Agsyviige Uec Including eccentric milling X/Y/C ▪ Hi-Cut Pro high-speed control for rotating tools ▪ 10 workpiece zero points (coordinate system selection) ▪ Coordinate conversion (shift, rotate) ▪ Electronic spindle orientation + / - 0.1°

Condition: used, CNC tool milling machine MAHO type MH 400 E Machine No. 43072 Year of construction 1989 travel X: 400 mm Y: 250 mm Z: 375 mm table size 700 x 270 mm distance spindle nose / table max. 410 mm tool holder ISO 40 with draw pin type B spindle speed 80 - 4000 rpm. 18 steps feed speed 1-1500 mm/min. infinitely variable Rapid traverse (X, Z and Y) 2,5 m/min. Pinol shift vertical 50 mm spindle drive 2,2 kW Iedpfjh Ic Ufsx Ag Usic mains connection 400 Volt, 50 Hz, 19 kVA - swivelling control panel with CNC path control PHILIPS 432 - LCD monitor VISCOTECH - hydro-mechanical tool clamping - swiveling device for the vertical milling head - Splash guard cabin as table enclosure with 3 folding doors - Electrical control cabinet fixed to the machine - Interface V24 (RS 232) for data transmission - 52470 operating hours, main switch on - rigid angular table - coolant unit with coolant pump adjacent under the machine - central oil lubrication Vogel - operator's manual, electrical circuit diagram space requirement L x W x H 2250 x 1800 x 1850 mm weight approx. 1,5 ton. good condition

Condition: used, Year of construction: 1996, pressure 130 t chamfer lenght 3060 mm distance between columns 2690 mm column arm 410 mm stroke 215 mm dayligth 385 mm ajustment speed 200 mm/sec working feed 1-10 mm/sec return speed 135 mm/sec table width 120 mm table height 1050 mm tiltable up to +/- 10 mm Number of working hours 53.820 h compressed air 5.0 - 7.0 bar oil volume 250 l operating pressure 340 bar voltage 400 V total power requirement 16.0 KVA weight of the machine ca. 11250 kg range L-W-H 3640 x 2210 x 2375 mm - in checked condition - machine video - ?v=23IbxRaZ2KA Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control model DA 65 * swiveling control panel, front left * 2D graphic programming & product display * tool & program library * including new TFT-LCD industrial monitor - CNC controlled axes: Y1 + Y2 / X / R - CNC electro-motor / controlled back stop (X axis) - CNC electro-motor / controlled height adjustment (R axis) - manual adjustment of the 2x stop fingers, from the front (Z axes) - manual adjustment of the die displacement, from the front (I axis) - WILA manual table crowning, including analog value display - TRUMPF hydraulic upper tool clamp - TRUMPF manual lower tool clamp Isdpfjxabqbjx Ag Ueic - 1x freely movable 2 hand / foot control - Safety device at the rear (sliding door) - Safety device at the side (swinging door) - Original operating instructions + CE declaration + circuit diagram

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 12,000 W, travel distance X-axis: 2,030 mm, travel distance Y-axis: 4,050 mm, travel distance Z-axis: 370 mm, DESCRIPTION ST4 High-powered Fiber Laser Cutting Machine The ST Series is a high-powered fiber laser cutting machine independently developed and produced by Baison Laser, suitable for cutting metal sheets such as carbon steel, stainless steel, aluminum alloy, titanium alloy, and galvanized aluminum-zinc. It meets various cutting needs for medium and thick sheet metals. Technical specifications Features • Electric Control for door and platform. Flexible and Efficient • Dual monitoring LCD displays (video cameras + controller) • Loading weight up to 2.500 kgs • Fully Enclosed Protective Cover with CE • Back panel control for pallet with emergecy button • Auto-focus laser head with automatic detection • Industial components with high durability • Emergency botton on remote control Ijdpjxfq Sxsfx Ag Usic Processing Format & Working Range Processing Area (L×W): 4.050 x 2.030 mm X-axis Stroke: 2.030 mm (1.7 kW motor) Y-axis Stroke: 4.050 mm (2 x 2.4 kW motors) Z-axis Stroke: 370 mm (0.75 kW motor) Max Single Lifting Platform Loading: 2.500 kg Accuracy X/Y Axis Positioning Accuracy: ±0.03 mm/m X/Y Axis Repositioning Accuracy: ±0.03 mm Speed Max. Moving Speed: 120 m/min Max. Acceleration Speed: 1.5 G Power Parameters Power Supply: 62.8kW/97A (380V/50Hz/3Phases) Protection Grade: IP54 Weight & Size Machine Size: 10.615*3.540*2.520 mm Machine Weight: 9.000 kg

Condition: excellent (used), CTS Type: T-40/2000 Air-cooled temperature test chamber Technical design: Refrigeration unit: air-cooled, low-noise, fully hermetic, infinitely variable power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A Door: fully opening door, door hinge left, one-handed operation, lockable. Shelf: Stainless steel, support surface 970 x 980 + 500 mm Max. load per shelf 35 kg Total load with max. grid load 100 kg Test area lighting: 3x halogen lamp 20 W, 12 V Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoint values Error messages in plain text RS 232 interface Iijdpfx Agsup T Uqs Uec Free switching channels for on-site test material control Temperature range: -40°C to +180°C Nominal voltage: 400V 3/N 50Hz Rated power: 10.4 kW Nominal current: 17.2 A Compressor: TFH2516Z Pipe feed-through NW 50 Control panel Window 570x710 mm Electrical connection, cable length 5m Technical performance data: Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 1.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2100 W at ± 0°C approx. 1500 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume: 2000 liters Test chamber dimensions: Height 900, width 975, depth 2200 mm External dimensions: Height 1950, width 1290, depth 3145 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain unpressurized R 1/2" internal thread Sound pressure level (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) < 55 dB(A) Weight: approx. 1200 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Temperature test chamber T-55/1000 Li water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Nominal current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 Iedpjvba Rasfx Ag Usic The type designation of the CTS cabinet series is composed as follows: z. e.g. type T -55/1000/Li 1) T means: temperature 2) -55 means: lower temperature -55 °C 3) 1000 means: 1000 liter test chamber volume 4) Li means: special equipment for tests with lithium-ion accumulators Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for on-site test material control Test room lighting: energy-efficient, high-intensity LED light strip mounted on the door Insert grid: Stainless steel, support surface 970 x 980 mm Load per shelf max. 35 kg Total load with max. grating load 100 kg 1a Feed-through NW50 1b Feed-through 2x NW125 1c Entry port 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation approx. 4000 W at +20°C approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without heat compensation and without additional equipment. Options may affect the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, width, approx. 860 mm, depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, width, approx. 1270 mm, depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Nominal current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) Mass approx. 1000 kg Heat output to the installation room 10.4 kW Cooling unit: water-cooled, low-noise, fully hermetic Infinitely variable output adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), CTS Type: TSR-30/1000 Water-cooled The type designation of the CTS enclosure series is made up as follows: z. e.g. type TSR -30/1000 1) T means: Temperature 2) S means: stress screening 3) R means: external conditioning 4) -30 means: lower temperature -30 °C 5) 1000 means: 1000 liter test chamber volume Technical performance data: A) TSR-30/1000 basic device without hose connections, i.e. when used as a stand-alone temperature test chamber Temperature tests: Temperature range -40°C to +180°C Final temperature -45°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 6.0 K/min Cooling 5.0 K/min Heat radiation approx. 5000 W at +20°C approx. 4200 W at ± 0°C approx. 3000 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Air volume flow approx.2000m³/h B) TSR-30/1000 basic unit with hose connections, for connection to an external test room provided by the customer Temperature tests: Temperature range -30°C to +170°C Temperature deviation ≤ ±0.1 to 0.5 K in time Average rate of temperature change, measured with short-circuited circuit Heating 4.0 K/min Cooling 4.0 K/min in the range from +150°C to -10°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment, measured with short-circuited circuit Attention: The external test chamber provided by the customer must be absolutely tight and appropriately insulated, any feed-throughs must be optimally sealed on site. Dimensions: Test volume 1000 liters Air circulation connection Ø 200 mm Test chamber dimensions Height 900 mm Width 1000 mm Depth 1100 mm External dimensions Height 1950 mm Width 1270 mm Depth 2245 mm Technical design: Refrigeration unit: water-cooled, low-noise, fully hermetic Infinitely variable capacity adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A Door: Fully opening door, door hinge on the left, one-handed operation, lockable. Shelf: Stainless steel, support surface 970 x 980 mm Max. load per shelf 35 kg Total load with max. shelf load 100 kg Test area lighting: Halogen lamp 20 W, 12 V Control: - 32 bit controller - LCD control panel Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 13.3 kW Protection class IP 22 Sound pressure level < 60 dB(A) Weight approx. 850 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Isdpfxjrivfcj Ag Ueic Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, KB Prüftechnik hardness tester type: KB 750 BVRZ Machine type: KB 750 1 kg - 750 kg UNIVERSAL DIGITAL KB universal hardness testing machines for automatic and standard-compliant hardness testing. Suitable for all hardness testing methods in the load level range HV 0.2 1 - 3000 kgf, Vickers, Brinell, Rockwell, Super-Rockwell, Knoop (HK 1 only), ball indentation hardness (plastics) and depth measurement according to Vickers and Brinell. Fully automatic test sequence, evaluation of the impressions on the built-in LCD monitor using a built-in video camera and zoom lens guarantee maximum evaluation accuracy in accordance with the standard. All hardness values are immediately displayed digitally. User-friendly and powerful control panel with color LCD monitor, high-contrast and glare-free. The indentation is measured without parallax. The test forces are electronically controlled and applied with maximum precision. The video image can optionally be output as a BMP file. All KB hardness testing machines are supplied with basic equipment that enables immediate commissioning with the indenters ordered. A selection of fixtures, test tables, indenters, lenses, hardness reference blocks etc. are available. Connection to a PC or central computer is possible with all KB hardness testing machines. In conjunction with the fully automatic software and motorized cross table, the machine can be operated as a fully automatic machine. Fully automatic test sequence Optical evaluation via integrated video evaluation Extremely user-friendly and powerful large LCD color display industrially designed membrane keyboard Variable software customization zoom lens 1:7 parallax-free measurement load cells, controlled load application, LED illumination Rockwell resolution 0.025 HRC Extremely powerful 200 freely definable test programs Calibration machine accuracy (option) Innovative LED ring light (option) Automatic image evaluation (option) 2 interfaces parallel + serial, as well as keyboard connection extended load range XL (option) freely switchable language selection German, English, French, Italian KB750 BVRZ: Test load 3-750 kgf Brinell ISO 6506 HB depth measurement Vickers ISO 6507 HV Depth measurement Rockwell ISO 6508 Rockwell ISO 6508 Superrockwell Test table ∅80 mm Motor zoom 1:7 Objective 4x for HV10-HB5/750 NOT suitable for HV5 Operating function: Programmable digital panel with the following functions: Measurement of the hardness impression on the LCD display, with movable measuring marks, parallax-free Logically structured, simple operator guidance Creation and storage of any of 200 test programs Automatic force selection by selecting the test method Freely selectable test force application times Freely selectable holding times of the test forces Online help Automatic correction for curved surfaces in accordance with DIN EN ISO Control of the fully automatic test sequence Direct, digital hardness value display Tolerance display Conversions according to DIN 50150 table B1 Report generation in DIN A4 format with standard printer via parallel interface Ijdpfx Agsu Hy Ime Uoic Serial interface for data output to PC Optional network 4 languages German-English-French-Italian Statistics functions, such as Number of tests Min / Max Mean value Range Standard deviation cp / cpk Histogram (Subject to changes and errors in the technical data!)

Year of construction: 2024, condition: like new (used), Compact Instrument for Automated Nucleic Acid Purification The Perkin Elmer Chemagic 360 is an automated benchtop system for isolating nucleic acids (DNA and RNA) from a wide variety of sample materials. It utilizes Chemagen's magnetic bead technology to obtain high-purity nucleic acids for various downstream applications. With dimensions of only 80 x 80 cm and its unique sample volume flexibility, the Chemagic 360 is an innovative instrument that can be adapted to almost all your nucleic acid purification needs. Utilizing proven M-PVA magnetic bead technology, the Chemagic 360 delivers high yields of high-purity nucleic acids suitable for a wide range of downstream applications such as NGS, MLPA, genotyping, and PCR. ``` Features at a Glance • Optimized design to prevent cross-contamination • Sample volume from 10 µl to 10 ml • Throughput of 96 to 4000 samples per day • Compact design • Ultra-fast DNA purification protocols available • Flexible reagent dispensing to keep operating costs low • User-friendly interface enables quick and easy installation • Easy integration into liquid handling platforms Benefits at a Glance • DNA isolation directly from human whole blood or plasma samples: No primary sample pretreatment is required • Ready-to-use DNA with high yield and purity • Fast processing times: 96 samples in less than 60 minutes • Long DNA fragments: up to 200 kb, suitable for NGS • High recovery rates • Autonomous system with respect to downstream assays Specifications: Manufacturer: Perkin Elmer Type: Chemagic 360 Iijdpfx Aeyk Uy Sjg Uec Throughput: approximately 96 samples per run Sample capacity: 12, 24, and 96 Volume: 10 microns to 10 ml Extraction heads (chemagic rod heads): 96 Number of samples: 1–96 Sample volumes: 10 µl to 400 µl Tube plates: 96-well plates Extensive kit portfolio – whole blood, saliva, serum/plasma, etc. No cross-contamination Revolutionary, compact table design LCD monitor, keyboard, mouse Power supply: 100–240 V~ (AC), 50/60 Hz Size/Dimensions: 800 x 800 x 900 mm Weight: 140 kg Year of manufacture: 2024 Video link: Chemagic 360 Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 2024, condition: like new (used), PerkinElmer Chemagic 360-D Nucleic Acid Extraction System The PerkinElmer Chemagic 360-D is an automated benchtop system for isolating nucleic acids (DNA and RNA) from a variety of sample materials. It utilizes Chemagen's magnetic bead technology to obtain high-purity nucleic acids for various downstream applications. Key Features and Specifications Technology: The system is based on the patented Chemagen M-PVA magnetic bead technology. Metal rods are magnetized to collect the beads containing the bound nucleic acids and transfer them between different process solutions, minimizing cross-contamination. Sample Volume Flexibility: It offers various rod heads (magnetic rod heads) for different volume ranges and throughputs: 12-Rod Head: For sample volumes from 1 ml to 10 ml. 24-Rod Head: For sample volumes from 200 µl to 4 ml. 96-Rod Head: For sample volumes from 10 µl to 400 µl. Applications: The isolated nucleic acids are suitable for a wide range of applications, including next-generation sequencing (NGS), genotyping, PCR, and MLPA. Software: The intuitive Chemagic software enables easy protocol setup, process status tracking (runtime, remaining time), and the generation of LIMS-compatible protocol files for quality assurance. Accessories: An optional Chemagic Dispenser 360 is available for quick and accurate reagent pre-filling, thus reducing manual labor. Dimensions: The device measures 800 x 800 x 900 mm (L/W/H). Iiedpoyk Upmefx Ag Ujc Certification: The 360-D version is a CE-IVD registered and FDA-listed instrument intended for in vitro diagnostic use (in combination with the appropriate kits). ``` The advantages at a glance • DNA isolation directly from human whole blood or plasma samples: No pretreatment of primary samples is required before extraction • Ready-to-use DNA with high yield and purity • Fast processing times: 96 samples in less than 60 minutes • Long DNA fragments: up to 200 kb, suitable for NGS • High recovery rates • Autonomous system with respect to downstream assays Specifications: Manufacturer: Perkin Elmer Type: Chemagic 360-D Throughput: approximately 96 samples per run Sample capacity: 12, 24, and 96 Volume: 10 microns to 10 ml Extraction heads (Chemagic rod heads): 96 Number of samples: 1–96 Sample volumes: 10 µl to 400 µl Tube plates: 96-well plates Extensive kit portfolio – whole blood, saliva, serum/plasma, etc. No cross-contamination Revolutionary compact table design Computer workstation with Chemagic software LCD monitor, keyboard, mouse Power supply: 100–240 V~ (AC), 50/60 Hz Size/Dimensions: Width: 900 mm (1500 mm with display attached and door open) Depth: 820 mm (1000 mm with door open) Height: 900 mm Weight: 140 kg Year of manufacture: 2024 Video link: Chemagic 360-D Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: new, Year of construction: 2026, The CORMAK H500SA automatic bandsaw is a technologically advanced double-column metal bandsaw designed for precise and efficient cutting of large steel components, tubes and profiles. With complete process automation, high cutting power and a durable structure, it performs perfectly in serial production and heavy-duty industrial operations. Main Advantages Automatic cutting cycle – the full cutting sequence from loading to arm return is performed without operator involvement. Hydraulic vice and material feed – ensuring fast, firm and precise clamping and feeding of the workpiece. High cutting capacity – suitable for materials up to Ø500 mm or 500 × 500 mm. Hydraulic blade tensioning – automatically maintains optimal tension for stable cutting performance. Cooling system and powered cleaning brush – extend blade life and improve surface quality. Construction and Technology The machine is based on a heavy-duty cast-iron and steel structure providing high rigidity and minimising vibrations during operation. The double-column design of the H500SA ensures cutting precision and long-term durability. Equipped with a 7.1 kW main motor and an independent hydraulic system, it delivers reliable performance under continuous use. The frame is inclined at a 3° angle to the work surface for more effective cutting of profiles and sections. The blade is guided by carbide-insert and roller bearings that ensure perfect blade tracking. The movable guide head automatically adjusts to the material width, enhancing stability and reducing blade wear. Precision and Productivity Hydraulically controlled arm feed with smooth pressure adjustment allows precise adaptation to the material being cut. The LCD control panel enables programming of the number and length of cut pieces, as well as real-time monitoring of cutting parameters. The machine automatically detects the end of material, faults, and operation status, ensuring uninterrupted production with maximum efficiency. Applications The CORMAK H500SA is an industrial metal bandsaw recommended for: Steel structure fabrication plants Serial production in metal workshops Cutting heavy steel pipes and profiles Large-scale steel processing and tool steel cutting operations Standard Equipment Full automatic cutting cycle Arm and vice position memory Hydraulic unit and feed system Hydraulic blade tensioning Powered blade cleaning brush Coolant circulation system Bimetal bandsaw blade CE Declaration of Conformity Technical Data Cutting range Ø500 mm or 500 × 500 mm Blade dimensions 5550 × 41 × 1.3 mm Blade speeds 40 / 60 / 80 m/min Main motor power 7.1 kW Hydraulic power unit 1.5 kW Coolant pump 0.09 kW Blade tensioning Hydraulic Feeder stroke 500 mm Load capacity 3 t Iedoyctwmepfx Ag Usic Table height 600 mm Machine dimensions (L × W × H) 2900 × 2200 × 1900 mm Weight 2400 kg

Year of construction: 2011, condition: excellent (used), Wölco Lupo VPAB-53 labelling machine  Isdpfxjh N Sa Re Ag Ueic Fully automatic labelling machine for professional labelling Wide-belt multi-labeler Manufacturer: Wölco Machine. Type: Lupo VPAB-53 Year 2011 Connection: 400V Current 3 x 16 A Power: 2,5 kW Air: 6 bar Wide-belt multi-labeler Wölco Lupo VPAB-36 Manufacturer: Wölco Machine. Type: Lupo VPAB-36 year 2011 Connection: 400V The Lupo VPAB-36 is the ideal machine for permanent industrial operation, if precise and variable label printing with position-accurate application is required. Sato printer S84 ex label printing system The SATO S84-ex/S86-ex printer is a very powerful, automated label printing system with a user-friendly design and a wide range of functions. This printer with its solid design is designed for continuous operation. The main functional features of the printer are: - Two-colour LCD backlight and two-colour status LED for optimised print status monitoring. - Solid design for harsh environments - Very fast print throughput with a maximum print speed of 16 ips and adjustable retract speed control - Printhead can be easily replaced without tools - Newly developed sensor cover with a non-stick surface that can be easily removed and cleaned without tools - Easy upload/download to/from SD card or USB memory and without using the SATO "All In One Tool" application - Supports external printer settings via the SATO "All In One Tool" application or a web browser - Supports multi-language display menu and Asian font printing - Supports emulation in standard firmware - Supports various communication interfaces - Supports SNTP protocol Financing through our bank is also possible. komplett-konzept.leasingo.de More items - new and used - can be found in our shop! International shipping costs on request!

Condition: like new (used), functionality: fully functional, Cooking Modes AC (Automatic Cooking): Automatic cooking system with recipe images. Manual Cooking: Fan-assisted (30–300 °C), Steam cooking (30–130 °C), Combination (30–300 °C). Programmable Operating Mode: Up to 15 cooking cycles can be saved, with name, image, and recipe information. Iiodpov Hztajfx Ag Uec Clima®: Automatic humidity control. Fast-Dry®: Rapid dehumidification of the cooking chamber. Functionality Display: Customizable, frequently used programs are displayed prominently. One-Touch Start: Automatic start of cooking. Recipes: Folder structure with preview and intelligent recognition. Screen: 7" high-resolution LCD TFT touchscreen. Operation: Scroll wheel with push function. Controls & Features Auto-reverse: Fan reverse for even cooking. Delta T: Monitors cooking chamber and core temperatures simultaneously. Steam Regulation: Automatic condensation adjustment. Settings: Programmable user parameters. Delayed Start: Scheduled cooking times. Fan Speeds: 6 selectable speeds, automatic heat adjustment. Core Temperature Probe: Four-point probe with external interface. USB Port: HACCP data, software updates, cooking programs. Energy Optimization: SN system (optional). Service Program: Diagnostics, maintenance indicator. Self-Diagnosis: Pre-use check, audible/visual warnings. LED lighting for improved visibility. EcoSpeed: Optimized cooking temperature, reduced fluctuations. EcoVapor: Automatic steam regulation for water conservation. Cleaning & Maintenance LCS (Liquid Clean) System: Automatic cleaning with recyclable capsules. 7 cleaning programs. Manual cleaning: Optional hand shower. Technical specifications Capacity: 7 × 2/1 GN – 14 × 1/1 GN Insert spacing: 70 mm Space for croissants: 70 / 180 pieces Dimensions: H x W x D 850 × 1170 × 950 mm Weight: 180 kg Power: Total 19 kW, Cooking chamber 18 kW, Fan 0.55 kW Power supply: 3N-AC 400 V, 50/60 Hz, 30 A Base frame Material: Stainless steel Mobile: Yes (with casters) Dimensions: H x W x D 860 × 1170 × 800 mm Financing through our bank is also available. komplett-konzept.leasingo.de

Condition: used, functionality: unexamined, machine/vehicle number: AA40 WN, overall weight: 240 kg, volume flow: 42 m³/h, input voltage: 220 V, Used Ebara AA40 WN Dry Vacuum Pump Manufacturer: Ebara Model: AA40 WN Iodpfjxlikmjx Ag Ujic Ultimate Pressure: 0.2 Pa Capacity: 4200 L/min Power: 200/220 Volt, 50/60 Hz (3Ph.) The Ebara AA40WN dry pumping system is a microprocessor-controlled, modular dry pump package that offers exceptional control and monitoring capabilities. The AA40WN pump system can be locally operated via a handheld or mounted LCD control panel.

Condition: used, CNC 3D coordinate measuring machine, MORA type Pico 0245.04.05.06 Machine No. Year of manufacture 2005 Measuring range X = 600 mm, Y = 500 mm Measuring height Z-axis 400 mm Machine table = granite slab 1250 x 1200 mm Slab thickness 200 mm Clearance in machine column 720 mm Axis travel speed - setup max. 65 mm/sec. Axis travel speed - rapid traverse max. 250 mm/sec. Mains connection: 400 volts, 50 Hz - Granite worktop with 200 mm threaded grid - RENISHAW PH10T motorized rotary/tilt head with interchangeable TP20 measuring probe - 1 probe head holder with manual adjustment - Various probe heads - Gemodek Microspeed 10 axis control in adjacent control cabinet - Manual control via handheld control panel with joystick and LCD display - Reference sphere on the table - PC for measuring software: Intel Pentium 4, 512 MB RAM, mounted in the machine base - 22-inch TFT monitor - Windows XP operating system - INCA 3D measuring software (license expired) The measuring machine was operated with a rental license and maintenance contract. Measuring machine footprint: W x D x H 1950 x 1800 x 2450 mm Measuring machine weight: 1250 kg Control cabinet weight: 120 kg Ijdpsrdlrxsfx Ag Ueic Very good condition

Condition: new, Year of construction: 2025, AVEREX HS-540i GTS 2-APC, New Machine Horizontal Machining Center with the option to adapt an optional pallet rotary magazine (6-APC or 8-APC) Standard equipment - AVEREX MPro1 (FANUC 0i-MF Plus) - 15" color LCD display, MANUAL GUIDE i, QWERTY* keyboard - iHMI – Intelligent Human-Machine Interface - Program memory with 2 MB and up to 1,000 programs - 4-axis simultaneous operation (X, Y, Z, B) - AICC II Control with 200-block Look Ahead function - HRV3+ servo drives (digital servo current control) - JERK Control (jerk regulation) - Fine Surface Technology (High-Speed High Quality) - Extended workpiece coordinate system G54.1 P1 - P300 - Workpiece coordinate system G52 - G59 - Memory card (PCMCIA Flash Card) and USB slot - Network interface RJ45, Embedded Ethernet - Enhanced embedded Ethernet - Week timer: Auto. Power On/Off for the machine - High-speed skip function - Tool Offset Memory C - 400 pairs of tool corrections - 1,000 storable programs - Programmable data input (G10) - Programmable spindle load monitoring M37/M38 - Tool life management - Extended macro variables (#100–#199, #500–#999) - Program restart - Helical interpolation - Cylindrical surface interpolation (G07) - Fixed drilling cycles - Synchronous tapping (G84/G74) - Rigid tapping with bell-shaped acceleration/deceleration - Programmable mirroring, scaling - Polar coordinate programming (G15/G16) - Chamfering or rounding corners (,C / ,R) - Optional skip blocks, up to 9 - User-defined macro programming Axis Travel - Travels X/Y/Z: 800/800/860 mm Speeds - Rapid traverse X/Y/Z: 74/74/74 m/min - Feed rate during milling: 0–40,000 mm/min - Rapid traverse B: 66.6 min-1 - 1G+ acceleration Pallet Changer - Rotary changer - Number of pallets 2-APC: 2 (machine / setup station) - Pallet size: 500 x 500 mm - Hole grid: 5 x 5 M16 x 25 mm deep, 100 mm pitch - Loading capacity: 550 kg per pallet - Workpiece size 2-APC: Ø800 x H1,000 mm - Workpiece size 6-APC/8-APC: Ø800 x H900 mm - Mechanical locking of pallet clamping - Pallet clamping force: 9.8 kN x 4 cones (39.2 kN) - Pallet height from floor: 1,100 mm - Standard preparation for retrofit of 4-way pallet storage (HS-540i GTS 2-APC ==> 6-APC, 2 + 4 pallets) High-Speed Tool Changer - Tool holder: BBT-40 (optional SK-40 DIN69871 or HSK-A63) - Number of magazine positions: 80 - Max. tool diameter: Ø95 mm - Max. tool diameter with adjacent spaces free: Ø185 mm - Max. tool length: 400 mm - Max. tool weight: 8 kg - Type: Fixed place / random - Speed: 16 s for 80 tools - Tool change time: 0.9 s / 2.1 s (heavy tool) - Chip-to-chip time: 3.0 s / 3.5 s (heavy tool) Spindle Rotary Axis - Manufacturer: PARKSON™ Iiodpfx Aswxdpgeg Usc - Axis: full 4th axis - Max. rotation: 66.6 rpm - Indexing: 0.001° - Clamping torque: 5,000 Nm - Holding torque: 1,973 Nm Linear Guides - Manufacturer: THK™ - Width: 45 mm - Guide shoes X/Y/Z: 190 x 120 / 120 x 70 / 154 x 86 mm Ball Screws Coolant, chip, and compressed air management

Year of construction: 2013, condition: excellent (used), functionality: fully functional, HIGHLIGHTS - camera system connected to a 19" screen for monitoring the cabin - interchangeable pallet table allows loading and unloading of the machine outside the working area - compact design - smoothing function for small holes and cut-outs for better cutting quality - complete databases for cutting technologies - CAM CONCEPT FINEST Professional software - Significantly lower maintenance costs compared to CO2 laser technology TECHNICAL DETAILS sheet size: 3000 x 1500 mm positioning speed up to 100m/min positioning accuracy +/- 0.03 mm laser source: 2,0 kW cutting capacity steel: max. 17 / 14 mm cutting capacity stainless steel: max. 10 / 5 mm cutting capacity aluminum: max. 8 / 6 mm Cutting power: max. 6 / 5 mm Iodpfxjl D Rp To Ag Usic Cabin: with sliding door; complies with laser protection class 1 Control system: ECK-827 (based on Windows XP), multi-process control system Control connections: 2 LCD displays, 4 USB ports, LAN adapter Control functions: simple and intuitive software, diagnostics of machine operation, advanced functions such as scaling, rotation, mirror image of cutouts, database of cutouts, complete databases for cutting technologies Software: CAM CONCEPT FINEST Professional (automation/NC programs, many data interfaces, cutting optimization) Laser source: fiber laser source from the company IPG (Ytterbium Laser YLS 2000) Special features: Fiber optic conduction of the laser beam, low power consumption, low cost of cooling, life expectancy of the source up to approx. 100,000 hrs. Cutting head: PRECITEK Functions: Anti-collision system, error recording system, function of precise positioning, enables quick change of focal length. pallet table: 2 pieces Filter system: noise level

Condition: good (used), mileage: 121,500 km, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, number of seats: 3, loading space length: 3,700 mm, loading space width: 1,650 mm, loading space height: 1,750 mm, Year of construction: 2020, Equipment: ABS, air conditioning, airbag, central locking, cooling unit, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, power assisted steering, soot filter, Nationwide delivery possible Refrigerated van Refrigerator: Carrier Xarios 300 Auxiliary cooling 230 V Mud flaps Driver's airbag ABS, ESP, ASR USB / AUX Multifunction steering wheel Power steering Storage compartment under passenger double seat Center armrest Cruise control Electrically heated mirrors Isdpfxjvliyxo Ag Ujic Electrically operated windows On-board computer Seats: fabric, black Central locking with remote control Air conditioning Radio multimedia (DAB digital radio, MP3 player, 5-inch LCD color touchscreen) Hands-free system Interior lighting Rear view camera HD with additional monitor (extra charge) The information provided on the Internet is non-binding descriptions. It does not represent guaranteed properties. The seller is not liable for tips and data transmission errors / changes / input errors. Please check the accuracy of the equipment features directly on the vehicle before purchasing. Errors / prior sale reserved. This advertisement is to be understood as an invitation to submit an offer.