Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 0-240-10-3388, functionality: fully functional, operating hours: 565 h, cutting width (max.): 4,250 mm, controller model: POWER CONTROL CADmatic 4 PROFESSIONAL, section length (max.): 4,300 mm, working height: 920 mm, Lightly used machine! TECHNICAL DETAILS Cutting length: 4,300 mm Cutting width: 4,250 mm Saw blade projection: 95 mm Folhccjyla I Roqmjfw Working height: 920 mm Speeds Saw carriage feed forward: 1–150 m/min Saw carriage feed backward: max. 150 m/min Program pusher speed forward: 90 m/min Program pusher speed backward: 90 m/min Angle cutting package Maximum panel thickness: 48 mm Leg length at 45°: min. 115 mm Angular accuracy at 1,000 mm: 0.1° Cutting angle: min. 0.0° MACHINE DETAILS Control system: POWER CONTROL CADmatic 4 PROFESSIONAL Main unit motor power: 13.5 kW Scoring unit motor power: 2.2 kW Mains voltage: 400 V Frequency: 50 Hz Required air pressure: 6 bar Compressed air consumption: 120 NL/min Extraction connection speed: approx. 26 m/s Negative pressure: 1,200 Pa Exhaust air volume: 3,800 m³/h Extraction connection—chip duct: 1 x 200 mm Extraction connection—pressure beam: 1 x 150 mm Operating hours: 565 h EQUIPMENT Power Concept Angle cutting package Groove-cutting package Automatic ejector rule Labelling package Data linkage to storage systems Note: Further details regarding machine configuration can be found in the attached document.

Condition: used, Year of construction: 1988, 105 twinband linear pm for upto 300mm round logs 4mtr length, this is a complete round to finish sawing system, breaking round logs down to return and resaw everything to a finished product, high production and minimum waste Folhjm Rhfdjccqmofw

Condition: good (used), Year of construction: 2005, machine/vehicle number: 05-01-540, functionality: fully functional, operating hours: 10 h, power: 5.5 kW (7.48 HP), cutting height (max.): 800 mm, cutting width (max.): 1,200 mm, saw blade diameter: 305 mm, tilt adjustment saw blade: 90 °, height adjustment type: electric, rotational speed (max.): 5,000 rpm, rotational speed (min.): 3,000 rpm, Equipment: rotational speed infinitely variable, saw blade guard, scorer, Great working saw Ffjlsynf Uuohccqmew

Condition: good (used), Year of construction: 2017, Multi-Sheet Machining For Maximum Output Automatic Loading System CNC Bandsawing, Routing & Drilling CNC Control Of The Bandsaw Movement +/- 90 Degrees The MZ Pluris is recognised as the machine of choice for all sofa and chair frame manufactures. The machine can work with OSB, Plywood, MDF, Chipboard (good quality), solid wood and also some composite materials. It has a number of key advantages over standard CNC nesting machines that include the possibility to stack multiple sheets high eg 5 x 12mm thick sheets, thanks to the use of the bandsaw sheet yield is much better, no vacuum is used so the machine is able to cut small shaped parts without difficulty and lastly cut parts are coming off on to the side discharge conveyor as the machine is still working, thus maximising machine output. Increased working capacity of 2550mm 1550mm Sheet size = 1220 x 2,440mm (8' x 4 ') and 1525 x 1525mm Standard equipment / features: CNC bandsaw specification - Maximum depth of curve 800mm - Minimum radius of cut 50mm - Maximum cutting height 100mm - Automatic angling of blade +/- 90 degrees Ffslhccqetqfv Ismsw - Blade size 5900 x 13mm - Automatic sawblade tensioning - Cast aluminium saw pulleys 900mm dia - Self braking motor 11kw CNC router specification: - Maximum working height / cutting depth 60mm - Electro spindle power S6 9KW - Variable rotation speed 7000 - 24000 rpm - HSK 63F tool holder Fence / grippers / supports: - Programmable pusher fence with 6 x pneumatic panel grippers - 8 x panel support arms General: - Automatic centralised lubrication system consisting of 3 x oil pumps - Internal conveyor belt for removal of dust / waste cuts - Free standing electrical control cabinet with PC and keyboard - Hand held remote control CNC vertical drilling unit: - Maximum drilling depth 70mm - 5 x independent drilling spindles in line. (Drills not included). - 1.7kw motor Plus package: - 5 position automatic tool changer - Automatic movement of clamps and support arms - set through the program Lifting table: - 4 screw - Capacity 2550 x 1525mm - Max load capacity 3000kg approx - Max panel pack height 700mm - PIT REQUIRED Year - 2017 CE Serial nr - 22/2017

Condition: used, total width: 900 mm, total length: 1,400 mm, total height: 1,600 mm, Weight: 500 kg Price: On request - Documentation available: No - CE certificate present: No - Main motor power [kW]: 3.0 - Max. cutting height [mm]: 120 - Max. saw blade diameter [mm]: 400 - Saw blade tilt angle [°]: 90 - Transport dimensions: 1400mm x 900mm x 1600mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Ffslhceytclzscqmew Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total height: 1,850 mm, total length: 950 mm, total width: 700 mm, Weight: 200 kg - Documentation available: No - CE certificate present: No - Serial number: 28359 Ffolhccsytbx Hsqmsw - Saw direction: vertical - Max. total opening [mm]: 600 - Max. cutting height [mm]: 280 - Table length [mm]: 490 - Table width [mm]: 480 - Max. saw band width [mm]: 15 - Suction nozzle diameter [mm]: 100 - Voltage [V]: 400 - Fuse [A]: 16 - Transport dimensions: 950mm x 700mm x 1850mm (l x w x h) - Transport weight [kg]: 200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2006, total width: 1,600 mm, total length: 1,700 mm, total height: 1,700 mm, Weight: 500 kg Price: On request - Year: 2006 - Documentation available: No - CE certificate present: No - Serial number: 15600600437 - Main motor power [kW]: 5.5 - Max. cutting height [mm]: 130 - Max. cutting width at 90° [mm]: 470 - Max. saw blade diameter [mm]: 550 - Saw blade tilt angle [°]: 45 - Voltage [V]: 400 - Current consumption [A]: 12 - Fuse [A]: 16 - Power [kW]: 5.5 - Transport dimensions: 1700mm x 1600mm x 1700mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Folheytbgdjccqmefw VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2005, total length: 5,450 mm, total width: 2,740 mm, total height: 1,590 mm, Weight: 750 kg Price: On request - Details: - └ Description: Slats of back wall are in poor condition - Year: 2005 - Documentation available: No - CE certificate present: No Felhceyr It Iocqmsfw - Serial number: 23677 - Max. cutting height vertical [mm]: 2060 - Max. cutting height horizontal [mm]: 1960 - Max. cutting width [mm]: 4300 - Max. cutting depth [mm]: 80 - Min. saw blade diameter [mm]: 300 - Max. saw blade diameter [mm]: 300 - Arbor saw blade diameter [mm]: 30 - Horizontal cutting: Yes - Vertical cutting: Yes - Transport dimensions: 5451mm x 2749mm x 1594mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1998, Price: On request - Year: 1998 Ffolhccsyrruvsqmow - Documentation available: No - CE certificate present: No - Serial number: 6605/9-811 - Max. cutting height vertical [mm]: 1900 - Max. cutting height horizontal [mm]: 1800 - Max. cutting width [mm]: 4000 - Max. cutting depth [mm]: 40 - Horizontal cutting: Yes - Vertical cutting: Yes - Voltage [V]: 400 - Fuse [A]: 16 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1998, total height: 2,550 mm, total length: 1,800 mm, total width: 1,800 mm, Price: On request - Year: 1998 - Documentation available: No Fsleyrpmcshccqmsfw - CE certificate present: No - Serial number: At10548 - Saw direction: vertical - Main motor power [kW]: 18.5 - Wheel diameter [mm]: 900 - Max. cutting to feed roller opening [mm]: 240 - Max. cutting to stop opening [mm]: 230 - Max. cutting width to column [mm]: 270 - Max. total opening [mm]: 470 - Max. cutting height [mm]: 350 - Table width [mm]: 900 - Table length [mm]: 760 - Max. band saw width [mm]: 80 - Feed roller type: Manual - Extraction port diameter [mm]: 180 - Options: Tiltable fence - Voltage [V]: 400 - Current consumption [A]: 32 - Fuse [A]: 40 - Power [kW]: 19.5 - Transport dimensions: 1800mm x 1800mm x 2550mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), total height: 3,340 mm, total length: 4,500 mm, total width: 1,950 mm, throat depth: 660 mm, Type: ONL 660x700 ACN Heavy duty double column bandsaw specific for high-alloy steels CNC touch control with saw parameters for various types of high-alloy steels cap round: dia 660 mm cap square: 660 x 700 mm bundle cap: 555 x 700 mm autofeed with stroke of 500 mm (with unlimited repositioning) sawing power: 18,5 kW the in-feed and sawing speeds are frecquency controlled enlarged height of sawblade: 67 mm chipconveyor equipped with fully motorized Weisshaupt rollerconveyors: - 10,3 meter in-feed rollerconveyor (outside) with 2 hydraulic clamps for aligning workpiece - 9 meter in-feed rollerconveyor (inside) with 2 hydraulic clamps for aligning workpiece - max workpiece width: 900 mm - each roll is motorized - cap of one roll is 4 ton - 4 meter out-feed rollerconveyor: Ffslheygywusccqmjw one rollerconveyor is equipped with scales to weigh workpiece after cutting (Sartorius system) Max height of workpiece: 700 mm Sawspeed: 10 > 120 m/min Length of band saw: 8660 x 67 x 1,6 mm Power needed: 27 kW (58 amp) Weight: 8,5 ton (only machine)

Condition: ready for operation (used), total height: 3,020 mm, total length: 3,300 mm, total width: 5,100 mm, throat depth: 1,060 mm, zware dubbelkoloms lintzaag voor het zagen van hooggelegeerde staalsoorten automatische invoer van het werkstuk met automatische herpositionering CNC-gestuurde variabele snelheid voor invoer en zagen spaantransportband uitgerust met volledig gemotoriseerde Weisshaupt-rollenbanen: - 10,3 meter invoerrollenbaan (buiten) met 2 hydraulische klemmen voor de contouren van het werkstuk - 9 meter invoerrollenbaan (binnen) met 2 hydraulische klemmen voor de uitlijnen van het werkstuk - Maximale werkstukbreedte: 900 mm - elke rol is gemotoriseerd - de capaciteit van één rollenbaan is 4 ton - 4 meter uitvoerrollenbaan: één rollenbaan is uitgerust met een weegschaal om het werkstuk na het snijden te wegen (Sartorius-systeem) Ffolhccqsv Sfp Asmsw Max height of workpiece: 860 mm Sawspeed: 16 > 80 m/min Length of band saw: 10260 x 80 x 1,60 mm Power needed: 32 kW (100 amp) Weight: 9 ton (only machine)

Condition: ready for operation (used), total height: 1,915 mm, total length: 2,500 mm, total width: 1,290 mm, empty load weight: 950 kg, nominal power: 6 kW (8.16 HP), throat depth: 400 mm, Rond materiaal: Ø 400 mm Rechthoekig: 400 x 400 mm Maximaal materiaalgewicht: 1000 kg/m Snijsnelheid: 20 tot 110 m/min Afmetingen zaagblad: 5090 x 41 x 1,3 mm Hydraulische klemming spaantransportband Max height of workpiece: 400 mm Ffolhoxpymajccqmow Sawspeed: 20-110 m/min Length of band saw: 5700 x 41 x 1.3 mm

Condition: ready for operation (used), total height: 1,400 mm, total length: 2,300 mm, total width: 2,300 mm, empty load weight: 2,000 kg, nominal power: 5 kW (6.80 HP), throat depth: 260 mm, cap round: dia 260 mm cap square: 260 x 260 mm Feljxqr Urohccqmsfw Max height of workpiece: 260 mm Sawspeed: 17 > 120 m/min Length of band saw: 4100 x 32 x 1,1 mm

Condition: used, Year of construction: 2000, functionality: fully functional, Robland Z320 Sliding Table Panel Saw - YoM: 2000 Machine is in well used condition, but fully working. Machine would benefit from a good clean. £1,500 (GBP) + VAT. 3200mm Sliding table saw. Ffolhccoynkm Njqmsw 1250mm Rip Fence x 3200mm Cross fence stops. Main Saw Blade Max Dia 400mm Scoring blade. Manual 0-45 Deg Blade tilt. Manual Rise and fall on blade. Manual adjustment of the Scribing blade.

Condition: used, Automatic Horizontal Bandsaw Year: 2011 Serial Number: 11042134 Model: LX – 460AE Blade Size: 4770MM x 41 MM x 1.3MM Hydraulic Ffelhoydv Rrjccqmsw Cutting Capacity: 460MM x 430MM

Condition: good (used), Year of construction: 2003, Tilting panel saw Altendorf F45 with ELMO IV-plus package, 2-axis scorer, 3m table, and Control-Plus control Sliding table length: 3000 mm Saw blade tilting from 0 to 45 degrees Speeds: 3000, 4000, 5000, and 6000 rpm with electronic speed display Drive motor: 5.5 kW with automatic motor brake Ffjlhsxw Ii Ssccqmew Control panel at eye level with Control-Plus control 4-axis CNC controlled Cutting of chain measurements and grooves on the rip fence and crosscut fence Cutting width correction on the rip fence and crosscut fence with tilted saw blade 600 cutting programs Calculator function with direct transfer of results to the respective axis Tool management Saw blade diameter up to 450 mm Max. cutting height: 150 mm Cutting width up to 1040 mm, electrically adjustable Tilting angle and height adjustment electrically adjustable Crosscut fence rail up to approx. 3210 mm, electrically adjustable, automatic coupling of the second stop flap for large dimensions Folding rip fence Extraction outlets: 120 + 80 mm Sliding carriage lockable Additional mitre fence rail 2 used saw blades and one scorer blade 2 riving knives 2-axis scoring unit, electrically adjustable during operation 2 blade guards 3 emergency stop switches Clipboard at the control panel CE marking Machine shows signs of wear. No cuts in the sliding table. Original paint (special paint finish), partially repainted in some areas. Machine has 18,985 operating hours. It originates from a furniture factory and has been regularly serviced and well-maintained. Condition as per original photos. A video of the machine in operation can be provided upon request. Approx. dimensions: 3150 x 3750 x 1900 mm (L x W x H). Weight approx. 1400 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this seller".

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Horizontal thin-cut band saw 300 mm working width, tillable 12 degrees New 2025 model with bigger wheels and inverters on wheels. Touchscreen Schneider, PLC and Inverters Schneider Germany 22.0 KW saw motor Bigger wheels for higher cutting speed Ffolhccoym Sdaeqmjw Frequency controllers on the wheels for adjustable cutting speed. For slats from 2 mm

Condition: new, Bandsaw HOLZKRAFT HBS 433 - Exhibition machine - Saw blade guide top, Saw blade guide at bottom, Quick clamping device via eccentric lever ----- Technical data ----- Rollers Ø: 430 mm, max. cutting height: 270 mm, max. cutting width with fence: 370 mm, max. cutting width without stop: 410 mm, max. belt length: 3,345 mm, Table size: 610 x 431 mm, Table inclination: -10 - +45 °, Motor 400 V: 1.5 kW, suction nozzle Ø: 2 x 120 mm, Cutting speed: 900 / 450 m/min, Dimensions (LxWxH): 768 x 512 x 2,048 mm, Weight: 130 kg Scope of delivery: 3 band saw blades 6 / 16 / 25 mm Ffolhccqou R S Akomew - new exhibition machine -

Condition: new, HOLZKRAFT sc 2c sliding table saw - Exhibition machine - pivoting, rip fence with fine adjustment ----- Technical data ----- Extraction nozzle Ø: 120 / 60 mm, Work table height: 900 mm, Speeds: 4,000 rpm, max. saw blade Ø: 315 mm, Cutting width with rip fence: 900 mm, Cutting height 90/45°: 100 / 79 mm, cutting length: 1,600 mm, Swivel range: 90 - 45 °, Dimensions (LxW): 1,020 x 325 mm, Weight: 295 kg - new exhibition machine - Ffolhccqeu R Sy Nemsw

Condition: new, HOLZKRAFT sc 3c 26 sliding table saw - Exhibition machine - pivoting, rip fence with fine adjustment ----- Technical data ----- Trimming length: 2,600 mm, max. cutting height 90°: 100 mm, max. cutting width to the left of the saw blade: 2,310 mm, Ffoleu R S Dhehccqmow Cutting width with rip fence: 900 mm, max. saw blade Ø: 315 mm, Main saw blade speed: 4,000 rpm, Motor power 400 V: 5.0 kW, Extraction nozzle Ø: 120 / 60 mm, Work table height: 900 mm, Table dimensions: 840 x 560 mm, Format sliding carriage dimensions: 270 x 124 x 2,600 mm, Transport width: 900 mm, Weight: 385 kg - new exhibition machine -

Condition: new, - Practical clamping system for panels, for trimming the underside and processing without intermediate storage of cut-offs - Comfortable height adjustment of the clamping jaws via control panel - Smooth and ergonomic operation - Modular welded machine frame, torsion-resistant and self-supporting - Scoring device for tear-free cutting quality - Automatic retraction of slatted frame during sawing - Central workpiece support for maximum flexibility - Easy switching between vertical and horizontal processing - Digital stop gauge - Transport wheels liftable via pedal for easy moving of heavy panels - Durable and precise material support for stable workpiece position - Pneumatic locking of the saw carriage - Large opening for saw blade change Extraction connection: - Extraction nozzle diameter: 100 mm - Extraction air requirement min.: 1800 m³/h - Air speed min.: 20 m/s Fslhswnrf Ueccqmofw Equipment: - Lower material support: metal rollers - Retractable slatted frame: automatic - Vertical measurement display: digital - Horizontal measurement display: digital - Panel clamping system - Locking of saw carriage: pneumatic - New exhibition machine -

Condition: used, Year of construction: 2018, total length: 5,000 mm, total width: 1,500 mm, total height: 1,650 mm, Weight: 1.450 kg Price: On request - Year: 2018 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 1408 - Max. cutting length [mm]: 3800 - Max. cutting height [mm]: 95 - Max. saw blade diameter [mm]: 350 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 125 - Controlled axes: Tiltable, Rip fence - Electrically adjustable axes: Rip fence, Tiltable - Spindle speed: - └ Max. spindle speed [rpm]: 4000 - Schuinstelbare zaagaggregaat: - └ Min. tilt adjustable [°]: 0 - └ Max. adjustable [°]: 45 - Voltage [V]: 400 - Current consumption [A]: 19 - Transport dimensions: 5000mm x 1500mm x 1650mm (l x w x h) - Transport weight [kg]: 1450kg - Transport packages [pcs.]: 2 Ffslhjx Igaysccqmsw Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1996, total length: 3,900 mm, total width: 2,100 mm, total height: 1,520 mm, Weight: 1.500 kg - Year: 1996 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: V233567 - Roller table length [mm]: 3200 - Table width [mm]: 1300 - Min. saw blade diameter [mm]: 200 - Max. saw blade diameter [mm]: 450 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Controlled axes: Tiltable - Manually adjustable axes: Cutting height - Options: Scoring unit - └ Pre-cutter saw blade diameter [mm]: 120 - └ Arbor pre-cutter saw blade diameter [mm]: 22 - Spindle speed: - └ Min. spindle speed [rpm]: 2800 - └ Max. spindle speed [rpm]: 5500 - └ Spindle speed control: Incremental Ffjlhccjxdlx Rjqmow - Voltage [V]: 400 - Current consumption [A]: 13 - Fuse [A]: 16 - Transport dimensions: 3900mm x 2100mm x 1520mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: as good as new (ex-display), Year of construction: 2018, The TAC CNX is a fully automatic machine that can cross cut straight or angled, coupled with a CNC vertical drilling unit and vertical hopper feed loading leading device. This means a combined operating cycle of feeding, drilling and cutting with no manual operator intervention. The TAC can also just be used for crosscutting if so required. The saw unit cutting angle automatically adjusts to the required angle from the program, while the drilling group is controlled in 3 axis with a 5 spindle point to point head. Programming is quick and simple thanks to the integrated colour graphic touch screen controller. The saw and drilling units are both located in an enclosed safety cabin with electrically interlocked doors, this giving the operator the highest level of protection. The machine is ideal for cutting and drilling for sofa / chair frame rails / parts, general furniture parts, plastics and / or aluminium extrusions. Specification - Heavy duty thick steel monobloc frame electro welded. - Automatic vertical loading system with length capacity upto 1350mm (longer on request). - Feeding via self centering grippers. - Special grippers to allow loading of / feeding of 2 pieces together (on top of each other). - Automatic step advancement movements of the material to be drilled / cut controlled by the NC on the X axis. Programmable movement from 1 to 1050mm, advancement speed max 60 mt/min (adjustable). Special 'macro' for back movement of the piece for material saving. - Outfeed motorised exit conveyor belt for cut / drilled parts 600mm long x 75mm wide. - Saw unit with 4kw motor/ 2800mm adjustable through inverter up to 4000 rpm. Automatic rotation of the sawblade +/- 60 degrees controlled by the CN. - 5 spindle in line vertical point to point drilling unit controlled on 3 axis by CN. - Easy programming with dedicated software with 12" screen an operator interface - Total protection of the the working cabin, interlocked doors with inspection windows. - In conformity with CE safety rules. Working dimensions - Length feeding in one operation 1 to 1000mm (can be increased by setting more positioning steps of the loader. - Width 10 to 200mm cutting at 90 degrees. - Width 10 to 150mm cutting at 34 degrees. - Thickness 10 to 80mm. - Productivity approx 3 seconds per operation (feeding, drilling, cutting = 9 seconds) Complete with optional Vertical hopper feed loader with 3m length capacity Fslsv Aalyshccqmjfw Year - 2018 CE Condition - As new ex display [ only used for demonstrations.]