Used Mössner , 520 - 2001 for sale (2,964)

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) • Drive, hydraulics, and cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) Fpjdpfx Aoyxdwdodcoh • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface

Condition: used, Year of construction: 2006, operating hours: 60,000 h, clamping force: 200 kN, displacement volume: 154 cm³, injection pressure: 2,500 bar, overall weight: 9,500 kg, screw conveyor diameter: 35 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Fjdpfoyzt R Sjx Adcoph

Condition: used, Year of construction: 2001, Automatic tenoner 1 saw with diameter 500mm 2 plate-type spreaders 2 cups with diameter 40mm Pneumatic pressers Automatic carriage advancement Digital display Fsdpfx Aoyr Ri Sedcsph Speed variator Total power 35 kW 400V Weight 3500kg

Year of construction: 2022, condition: used, functionality: fully functional, TRAUB Stone Dry Saw MULTI-STONE 520 MULTI-STONE 520 — Year of manufacture 2022 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 3,750 plus VAT | EXW Einbeck | Delivery upon request Fpjdpfx Asy A E Nijdcoh

Condition: excellent (used), Year of construction: 2009, operating hours: 78,099 h, functionality: fully functional, screw diameter: 25 mm, total height: 2,800 mm, overall weight: 10,700 kg, Equipment: documentation/manual, Arburg 520S 1600 290/70 2-component 12.3 million cycles 86,565 hours manual operation 78,099 hours automatic operation Injection unit 1 horizontal 290, diameter 25, max. 71 cm³ Injection unit 2 vertical 70, diameter 18, max. 21 cm³ Opening stroke 925 mm Electric index rotation 12-zone hot runner integrated 3x core pull 2x air blow (control for needle shut-off) Various customer inputs and outputs Fodpfx Adexzix Ajceph Interfaces: ALS Temperature control units Dryers Multilift H 6kg: 2x vacuum 5x double-acting grippers Z-axis servo 800mm C, G, X, and B-axes pneumatic Various customer inputs and outputs (gripper monitoring, etc.) Important Notice!!! Current update – Tax note and benefit for used machinery From 01.07.2025, used machines can also be considered for tax purposes with a special depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth Booster (§ 7 Section 2 EStG-E)

Condition: excellent (used), Year of construction: 2009, operating hours: 78,100 h, functionality: fully functional, screw diameter: 25 mm, Arburg 520S 1600 290/70 2-Component 78,099 hours, automatic Injection Unit 1: horizontal, 290mm, diameter 25mm, max. 71 cm³ Injection Unit 2: vertical, 70mm, diameter 18mm, max. 21 cm³ Opening stroke: 925 mm Electric table indexing 12-zone integrated hot runner 3x core pulls 2x air blow (control for needle shut-off) Various customer-specific inputs and outputs Interfaces: - ALS Fedsx A Dy Ropfx Adcoph - Temperature control units - Dryers Multilift H 6kg: - 2x vacuum - 5x double-acting grip - Z-axis servo 800mm - C, G, X, and B axis pneumatic - Various customer-specific inputs and outputs (gripper monitoring, etc.) At Maschinen-Handel, we offer a commissioning guarantee for every machine purchased from us, meaning the machine will be started up by the manufacturer. This offers you, as a customer, maximum security on the used machinery market. Important Note!!! Current legal update – Tax advantage for used machinery Effective from 01.07.2025, used machines can also be subject to an annual special depreciation of 30%. In addition to the lower price compared to a new machine, you can benefit from the same depreciation allowances as with a new machine. Keyword: growth booster (§ 7 Paragraph 2 EStG-E)

Condition: good (used), Laminator Bagel Digifav 520 B2 automatic laminating machine The machine is 100% functional, in perfect condition, ready for production. Very low mileage. Fpsdpjy Nfh Sefx Adceh It is an advanced, high-performance machine dedicated to digital printing houses. Production Spain. Technical data: Max sheet size: 520mm x 720mm Min sheet size: 220mm x 220mm Min weight: 130 gsm Max grammage: 350 gsm Operating temperature: 80-145°C Max working speed: 22m/min Weight: 750 kg Power supply 380V Additionally, 6 Bar air A steel, chrome-plated cylinder with a large diameter, filled with oil for greater operational stability. Pneumatic pressure, separation and automatic feeding from a high stack. Adjustable pressing force. Expanding shaft for attaching the foil, mounted on a tilting arm. Touch panel for easy operation. Sheet straightening module. Receiving table. Ask about the product

Condition: used, Year of construction: 2001, Folding machine Heidelberg Stahlfolder KD 66/ 4KTL - FD Year 2001 Description: - 16 page folder Feeder - Flat pile feeder - Pump Folding unit Heidelberg Stahlfolder KD 66.1/4 - Parallel fold unit with 4 buckle plates: 66cm - Perforating shaft Fpjdpfx Adeykz Sbsceh - First cross fold - Buckle fold underneath first cross fold - Second cross fold to the left Delivery Heidelberg Stahlfolder - Stream delivery

Condition: ready for operation (used), A compact screen printing machine Thieme is available. Print dimensions X/Y: 750mm/1050mm, max. screen frame dimensions X/Y: 1200mm/1400mm, max. print material height: 40mm, squeegee speed: 75m/min, printing speed: 950cycles/h, machine dimensions X/Y/Z: approx. 1800mm/1700mm/1350mm, weight: approx. 700kg. An on-site inspection is possible. Fpodpfx Aey Duqrodceh

Year of construction: 2013, condition: ready for operation (used), Offered is a precision lathe: Distance between centers: 1500mm, Center height: 265mm, Swing diameter over bed: 530mm, Speed range: infinitely variable up to 2000rpm, Weight: approx. 2135kg, Inspection by appointment possible. Fodpfoy Dgq Rsx Adceph

Condition: used, Year of construction: 2001, Folding machine Heidelberg Stahl folder KD 78/4KLL Year: 2001 Description: - 32 page folder Feeder - Flat pile feeder - Pump Folding unit Heidelberg Stahl folder KD 78/4KLL Fpjdpfoyi Ub Tex Adcoh - Glue unit - Parallel fold unit with 4 buckle plates - Perforating shaft - First cross fold - Second cross fold to the left - Third cross fold (left) - Excluding noise hoods Delivery Heidelberg - Stream delivery

Condition: new, roll diameter 520 mm throat 520 mm workpiece height 310 mm cutting speed 25 - 500 m/min table surface area 600 x 500 mm band length 3.880 x 3-16 mm mm Table tiltable up to 15° Grad work height max. 1000 mm total power requirement 1,5 kW Fpodpjxaazxsfx Adcsh weight of the machine ca. 500 kg. dimensions of the machine ca. 1,3 x 0,76 x 2,14 m Furnishing: - Solid gray cast iron table - Safe working is guaranteed by the large contact surface - Standard with band welding device, annealing device - Scissors and sharpening stone - As standard with continuously adjustable cutting speed - Machine body made of robust steel construction for smooth running - Precision blade guide for optimal cutting results - Ideal for sawing complicated contours and shapes - Work table can be swiveled by 15 ° in all 4 directions - Blow-out device with compressor included in delivery - For radius sawing saw bands from 3 mm wide available scope of delivery: - saw band - Tape welding device with annealing device - halogen light - Scissors - grindstone - Chip brush - blow-out device - LED digital display - Longitudinal table groove

Condition: good (used), Roots blowers Manufacturer: Leybold Type: RUVAC WSU 2001 Cat.-No.: 11741 Fpodednv D Sspfx Adceh Suction capacity: approx. 2000 m ³/h Status: Rebuilt Warranty: 12 months (image)

Condition: used, This listing is for a Watson Marlow 520S Peristaltic Pump. (1 of 7 Available) Fpsdpfsxv A Uysx Adceh The unit is in full working condition and is ready for immediate release. Peristaltic pumps are the simplest possible pump, with no valves, seals or glands to clog or corrode. The fluid contacts only the bore of a tube, eliminating the risk of the pump contaminating the fluid, or the fluid contaminating the pump. Peristaltic pumps can operate dry without risk. Easy to install, simple to operate and inexpensive to maintain, peristaltic pumps are ideal for most fluids, including viscous, shear-sensitive, corrosive and abrasive fluids, and those containing suspended solids. Suitable for metering, dosing and dispensing applications. 520S drive offers manual control via a large-key membrane keypad: speed adjustment; run and stop; forward/reverse; "Max" key for rapid priming and purging. Supply voltage/frequency: 100-120V/200-240V 50/60Hz Flow rates from 4 micro-litres/min up to 2.4 liter/min Precise 2,200:1 speed control range from 0.1 to 220 rpm in 0.1 rpm increments Large speed/flow display and easy to use tactile membrane keypad. Incorporates keypad lock Manual control and flow rate calibration MemoDose for accurate single shot dispensing

Condition: used, Year of construction: 2001, Perfect binding line Muller Martini Year: 2001 Consisting of Gathering machine Muller Martini 3691 Description: Fedpfxjyitabj Adcsph - Hand feeding station - Number of gathering stations: 21 - ASAC automatic self adjusting calliper - Pump(s) - Set up element - Reject gate for incomplete products: 3614 - Side stitching unit - Criss cross delivery - Book block feeder - Transfer into the binder Perfect binder Müller Martini Trendbinder (3018/27) Description: - Number of clamps: 27 - Main milling station - 1st spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Hotmelt spine glue unit, interchangeable - 1st premelter for spine glue unit - Cold glue spine gluing, interchangeable - Base for 2nd spine glue system - 2nd hotmelt spine glue unit, interchangeable - 2nd premelter for spine glue unit - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit - Gauzing station - Cover feeder - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system - Transport system, length (approx): 35 mtr Three knife trimmer Müller Matini Zenith-S (3672) Description: - Infeed conveyor from the left - Automatic hopper feeder for inline production - Knife pre-setting device - Sets of knives: 1 - Exchangeable cutting tables (standard set): 4-17 Book stacker Müller Matini CB 16 (3631)

Condition: used, Year of construction: 2001, Overview This Krones rinser-filler-capper block was manufactured in 2001 and consists of a Volumetic filling system combined with a Variojet rinser and a screw-capping machine. The machine is designed for PET multiway bottles (GDB PET-MW) in 1.0 L and 0.5 L formats. The system is equipped with 120 filling valves and 88 rinsing stations. The rinser operates with 2 rinsing channels, currently configured for ClO₂ and fresh water. The machine runs clockwise and achieves a production capacity of up to 32,000 bottles per hour at 1.0 L. The machine will be available from October 2026 and will be exchanged parallel to the installation of the new line.  Technical Data manufacturer: Krones model: Volumetic (filler) / Variojet (rinser) year of manufacture: 2001 filling valves: 120 rinsing stations: 88 rinsing channels: 2 (currently ClO₂ and fresh water) formats: 1.0 L GDB PET-MW 0.5 L GDB PET-MW POC 1810 closures production capacity: 32,000 bph at 1.0 L direction of rotation: clockwise availability: beginning of October 2026 Fodpfxjyluwte Adcjph

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: N2205881, GEM 520 CARTON SEALER WITH SIDE DRIVE BELTS FOR UNIFORM CARTON SIZES CARTON DIMENSIONS: - Length: min. 150 mm - max. ∞ - Width: min. 100 mm - max. 520 mm - Height: min. 100 mm - max. 520 mm TECHNICAL DATA: - Drive & guide belts: vertical - Carton size adjustment: manual - Sealing unit: bottom & top - Standard version: T22 / T23 - Tape width: from 38 to 50 mm depending on unit - Adjustable tension Fjdpfx Adeykuk Receph - Max. tape roll diameter: 360 mm - Tape roll core: 76 mm - Power supply: 400V, 3-phase, N, PE - 50/60 Hz - Consumption: 0.25 kW - Protection rating: IP 54 - Working environment: +5°C to max. +35°C - Conveyor speed: 22 m/min - Average output: 1,000 cartons/hour - Working height: 650 mm - Weight: 144 kg - Machine dimensions (L x W x H): 1,170 x 880 x 1,450 mm The illustration may show options subject to a surcharge.

Condition: used, We offer you Oerlikon Leybold WSU 2001. Fodpfx Asrf T Dyjdcsph The pump is used. If you are interested, just send us a message. We will then get in touch with you.

Condition: new, We offer you Oerlikon Leybold WSU 2001. Fsdpfsrf T Aqex Adcoph The pump is new. If you are interested, just send us a message. We will then get in touch with you.

Year of construction: 1999, condition: used, End sheet tipping machine Hunkeler VEA 520 KS - HHS Year: 1999 Description: - Offline production - Photocell protection - Cold glue: HHS C-210 (nozzle) Fodpfx Aox Eblpjdcsph - Hotmelt - Premelter: Robatech Concept 4/2 - Inserting - End sheet tipping - Pressing station - Delivery Max. mechanical speed: up to 8.400 cycles/h Outside gluing max. size: 520 x 310 mm Outside gluing min. size: 100 x 70 mm Inside gluing (inserting) max. size: 360 x 260 mm

Condition: reconditioned (used), Year of construction: 1978, functionality: fully functional, machine/vehicle number: 1025, Surface Grinding Machine Jung JF 520 DS No. 1025 with 1 Year Full Warranty - Geometrically overhauled; accuracy according to Jung standard less than 0.003mm - Electrical system tested, fully functional, relevant components replaced - Mechanics overhauled - All wear parts replaced - Color: reseda green; paint condition ok Equipment: Electro-permanent magnet 500x200mm including retrofitted Wagner control unit 756 2-axis digital readout for Y and Z axes Automatic feed for Y and Z axes Spark-out: 0 to infinite Y-axis with zero shutoff via stepper motor Roughing-finishing feed adjustment Manual hand dresser Infinitely variable spindle speed V-constant through wheel wear compensation Fjdpfxjy D I Idj Adcoph Paper band filter unit, used, fully functional Max. grinding area: 600x250mm Max. load incl. magnet: 100kg Total weight: 2.5t

Condition: used, Year of construction: 2011, Decoiler Coil weight: 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1600 mm Expansion range: 460 - 530 mm Leveller / Straightener Material width : 20 - 400 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pull out rolls: 4 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 3,5 mm Feeding speed: 2 - 10 m / min Roll feeder Material width max.: 310 mm Material thickness: 3,0 mm Material thickness at max. width: 2,8 mm Material thickness at max. cross section: 850 sq mm Number of feeding rolls: 2 pcs. Diameter of feeder rolls : 80 mm Feeding speed: 104 m / min Required power: 1,5 kW Standard configuration Coil loading unitStroke 500 mm Load capacity 5000 kg Fpjdpjuqfa Isfx Adcoh Material width max. 500 mm

Condition: excellent (used), mileage: 349,000 km, power: 382 kW (519.37 HP), first registration: 09/2015, fuel type: diesel, fuel: diesel, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,450 mm, loading space width: 2,550 mm, Year of construction: 2015, Equipment: central locking, retarder, trailer coupling, = Additional Options and Equipment = - Low noise - Intarder - Alloy wheels - Air suspension - Reversing camera Fpedpfx Aoytr Ixjdcjh - Sun visor - Xenon lighting - Power Take-Off (PTO) - Central lubrication - Towing hitch = Further Information = Unladen weight: 23,345 kg Payload: 13,655 kg Gross vehicle weight: 37,000 kg Body manufacturer: HMF 6020 K7 CE marking: yes Technical condition: very good Visual condition: very good Price: On request

Condition: ready for operation (used), Year of construction: 2016, operating hours: 9,171 h, clamping force: 1,600 kN, screw diameter: 45 mm, controller manufacturer: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force • Extended clamping program with 2 stages • Hydraulic, servo-controlled ejector on moving platen • Injection/plasticizing unit: • Screw diameter: 45 mm (without nozzle) • High wear-resistant version • Sinter-metal check ring • CrN coating on screw and check ring • Suitable for abrasive, corrosive, and high-temperature thermoplastics • Technology level 2 – servo-controlled, dual-circuit pump system: • Two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control system: • Touchscreen operation with process editor • 15-inch (38.1 cm) display • Multilingual interface (German, English, local language) • Heating capacity zones 1–6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • Connectivity/interfaces: • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • EUROMAP 67 robot interface • Prepared for ARBURG MULTILIFT robot system • Utilities: • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • 400 V / 50 Hz, with neutral conductor • Hours: 9,171 Additional equipment • None included in the listing • Note: Machine is prepared for robot integration (EUROMAP 67 interface; prepared for ARBURG MULTILIFT), but no robot/automation is included. Fjdpfx Aeyg I Ihjdcoph

Condition: ready for operation (used), Year of construction: 2016, operating hours: 13,361 h, clamping force: 1,600 kN, screw diameter: 45 mm, controller manufacturer: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN, a screw diameter of 45 mm, and a servo-controlled dual-circuit pump system for precise movements. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force; extended clamping program with 2 stages • Hydraulic, servo-controlled ejector on moving platen • Screw diameter: 45 mm (without nozzle) • High wear-resistant version; sinter-metal check ring; CrN coating on screw and check ring • Suitable for abrasive, corrosive and high-temperature thermoplastics • Technology level 2: servo-controlled, dual-circuit pump system with two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure Fpedpfeyg I Egex Adcoh • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control system with touchscreen process editor • 15-inch (38.1 cm) display; multilingual interface (German, English, local language) • Heating capacity zones 1–6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • Electrical: 400 V / 50 Hz, with neutral conductor • Hours: 13,361 Additional equipment • None included as listed • Robot/automation readiness: EUROMAP 67 robot interface; prepared for ARBURG MULTILIFT robot system