Used Mains Filter Single Drive for sale (38,095)

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Left-hand machine (fixed stop on the left). Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Psdpozuykvefx Aazsrb Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. (not to be confused with processing speed) Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Machine length approx. 10,900 mm Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit for optional operation of straight edge or softforming gluing, by changing the glue application. Edge material: - Strips: up to 1.3 mm - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW 1 2-fold magazine only for edge material up to 3.0 mm thick, can be manually attached to the single-roll magazine 1 groove forming pressing unit for pressing the edge material into the groove with: - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order

Condition: used, Year of construction: 2010, - Application of release agent, top/bottom - Joint milling unit - Gluing unit - Trimming unit - Copy milling unit SKF-L - Profile trimming blade unit - Spray cleaning agent - Self-adjusting trimming blade unit - Buffing unit Single-sided edge banding machine Manufacturer: IMA Type: Advantage 310 Year of construction: 2010 Technical data Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65* / 150 mm *at a max. workpiece thickness of 25 mm - Workpiece thickness: min. 8 mm, 12 mm with profile trimming blades max. 40 mm (with MFA 08.346), 60 mm (with SKF) - Smallest workpiece: 65 x 300 / 150 x 150 x 19 mm - Machining allowance per workpiece edge: 0 - 5 mm (observe max. chip cross-section) - Workpiece shape: right-angled - Material: chipboard, MDF - Surface material: direct coating (melamine resin paper), paper, film, veneer Edge material - Roll material without film: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm - max. edge cross-section: 150 - 180 mm² - Cut edge strips: Strips: 3.0 - 8.0 mm - max. strip cross-section: 520 mm² - Edge height: min. 12 mm, max. 65 mm - max. upper edge overhang: 2 mm - Edge profiles Paper edge: approx. 0.4 mm, chamfer 15 Plastic edge up to 3.0 mm, radius depending on the tool Strip up to 8 mm flush milling (with interchangeable motor on MFA) Machine - Constant workpiece projection from the chain track: 35 mm + edge thickness - max. trimming cross-section 520 mm² - Throughput width: min. 65 mm (with projection of 35 mm) - min. workpiece length in feed direction: 150 mm Prjdjzuyp Eepfx Aazob - Overall height (top edge of chain track): 940 mm - Unit side: on the left in feed direction - Pneumatic connection: approx. 7 - 8 bar Application of release agent, top/bottom Joint milling unit 08.379 and blowing nozzle - with 2 motors, each 4 kW, 9000 RPM, 150 Hz Gluing unit 283.1513 with oil bath gearbox - Adhesive output 0.8 l, 60 mm high, with quick-lock system - can be used for hot melt adhesive or PU adhesive - with single roll / strip magazine, roll diameter 800 mm - with 3 main pressure rollers and 3 counter pressure rollers Trimming unit 08.415 - pneumatically swiveling to 0 or 8 degrees - with 2 motors 660 kW, 400 V, 200 Hz, 12000 RPM - 2 HM trimming saw blades 160 x 3.5 x 22, Z=36 Copy milling unit SKF-L - with 2 motors 180 W, 400 V, 200 Hz, 12000 RPM - and 2 motors 400 W, 400 V, 200 Hz, 12000 RPM - 1 set of DP profile milling cutter I 80x12xHSK25-R, Z = 4, with HSK25 shank - Profile length in the feed direction: max. approx. 50 mm - Workpiece thickness: max. 60 mm - Working speed: max. approx. 20 m/min - Distance between 2 workpieces: min. approx. 400 mm - min. workpiece projection = 35 mm + profile depth Profile trimming blade unit 08.519 - For finishing a top and bottom milled quarter-circle profile Spray cleaning agent Self-adjusting trimming blade unit 08.521 - for removing hot melt adhesive residue from the edge area of the top and bottom of the workpiece Buffing unit 08.617-2 - with an upper and lower motor: 180 W, 50 Hz, 1400 RPM - 2 polishing pads 50 x 160 x 19 mm

Condition: used, Candles: 12 cartridge height [inch]: 30 Podpfx Aasz Aizmezjrb cartridge type: code 41 with fin end, 3 locking tab ext 222 O-ring closure: parrotlip Fittings: draining outlet, manometer, deaeration

Condition: good (used), Year of construction: 1983, Offer 26245 Technical data: - max. pressing force 100 t - max. ram stroke approx. 500 mm - stroke speed 25 mm/s - return speed 125 mm/min - installation height approx. 800 mm - overhang to the center of the ram 380 mm - ram clamping surface 530 x 400 mm - ram clamping pin 40 mm - table size 750 x 560 mm - table bore / through hole in the table 200 mm - table height above floor 720 mm - oil filling volume approx. 200 l - drive 400 V / 11 kW Psdsz A Az Rspfx Aazerb - space requirement approx. W 1150 x H 2980 x D 1850 mm - weight approx. 4600 kg

Condition: good (used), Year of construction: 1981, machine/vehicle number: 027-006-20, Offer 26244 Technical data: - Max. pressing force 63 t - Max. ram stroke 500 mm - Stroke speed 200 mm/sec - Return speed 400 m/min Predpfxjz A Axvj Aazjb - Installation height 800 mm - Overhang to center of ram 360 mm - Ram clamping surface 530 x 460 mm - Ram clamping pin 40 mm - Table size 750 x 560 mm - Table bore / through hole 180 mm - Table height above floor 700 mm - Oil capacity (approx.) 300 l - Drive 380 V / 11 kW - Space requirement (approx.) W 1150 x H 3100 x D 1750 mm - Weight (approx.) 4300 kg

Condition: as good as new (ex-display), 1 x Fronius PT Drive manual welding torch for TPS 4000/5000 machines. 4,047,375.000. Compact Planetary drive. water-cooled. Neck can be supplied with additional cost. Un-used, selling off as old stock. Many other Fronius torches available. Please contact for details. Predpstqu Nrefx Aazjb Delivery not included.

Condition: good (used), mileage: 544,345 km, power: 375 kW (509.86 HP), first registration: 10/2021, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 6x2, wheelbase: 3,200 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 7,000 mm, total width: 2,550 mm, total height: 3,960 mm, Year of construction: 2021, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, traction control, = Additional Options and Accessories = - 2nd Diesel Tank - Heated Mirrors - Digital Tachograph - Driver's Tachograph (Recording Device) - Globetrotter Cab - Halogen Lamp - Manual - Radio/Cassette - Slider - Lane Keeping Assist - Fabric = Notes = Number of axles: 3, Configuration: 6x2, Tare weight: 9931 kg, Gross vehicle weight: 26500 kg, Total fuel tank capacity: 1000 liters, 2nd Diesel Tank, Height of fifth wheel coupling: 122 cm, Fifth wheel coupling: Slider, Number of locks: 1, Winch pulling capacity: 396 tons, Suspension type: Air suspension, Type of cab: Globetrotter, Cruise control, Driver's Tachograph (Recording Device), Digital Tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/Cassette, Color: White, Heated mirrors, Lighting type: Halogen lamp, Lane Keeping Assist, Climate control, Bluetooth, Engine power: 375 kW (503 hp), Fuel: Diesel, Euro: 6, Transmission type: I-Shift, Transmission type: Volvo, Gears: 12, Power steering, ABS, ASR, Central locking, Seat configuration: 1+1, Seat covering: Fabric, Seat adjustment: Manual = Additional Information = Transmission Transmission: VOL, 12 gears, Automatic Axle Configuration Tire size: 315/70R22.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 6 mm; Tire tread depth right: 3 mm; Suspension: Leaf spring suspension Axle 2: Double tires; Tire tread depth left inner: 7 mm; Tire tread depth left outer: 7 mm; Tire tread depth right inner: 6 mm; Tire tread depth right outer: 5 mm; Suspension: Air suspension Axle 3: Lift axle; Tire tread depth left: 7 mm; Tire tread depth right: 6 mm; Suspension: Air suspension Weights Unladen weight: 9,931 kg Payload: 16,569 kg GVW: 26,500 kg Pjdpfx Aozt Ik Uoazorb Condition Technical condition: good Optical condition: good Damage: none Number of keys: 3 Financial Information Leasing price: €1,154 per month (default, 72 months); Inquire for further information and conditions Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Support for import and transport • (Export) license plates can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: used, Year of construction: 2000, Filter area: 10m2 Instructions for use and spare parts list available Prodpfx Asz Ad I Ueazsb

Condition: good (used), Year of construction: 2004, The used filter dust collector Infastaub MKR 4/20 - 4/20 RO or industrial cassette filter, is a high-performance filter system for efficient process air dedusting. Thanks to its two-stage configuration, the system is perfectly suited for critical and fine dusts – such as pharmaceutical dusts in the particle range of 1 to 10 µm. The integrated rotational cleaning (RO) ensures constantly low differential pressures and maximum service life in continuous industrial operation. Name: Cassette filter Manufacturer: Infastaub Type: MKR 4/20 - 4/20 RO Year built: 2004 -Max. volume flow: Up to 6,000 m³/h -Filter area: Total 160 m² (80 m² in the 1st stage + 80 m² in the 2nd stage) -Number of chambers: 4 chambers -Filter classes: Stage (cleanable): H13 (HEPA – 99.95% separation efficiency) Stage (safety stage): H13 to U15 (ULPA – up to 99.9995% separation efficiency) -Residual dust content: values down to < 0.001 mg/m³ -Max. operating temperature: +80 °C -Cleaning: pneumatic via compressed air pulse (approx. 6 bar compressed air pressure) -Dimensions (approx.): length 3,800 mm × width 1,150 mm × height 2,300 mm -Net weight: approx. 4 tons -Voltage: operating voltage 400V / 50Hz, control voltage 24V DC -Material: stainless steel -Raw gas collecting duct ∅ D6: 315 mm, M6: 700 mm -Technical doc.: Yes -Accessories: Control -Condition: Used-good -Price: On demand Pedpfsmzat Hsx Aazerb

Condition: used, Chassis with friction wheel drive for DEMAG lightweight crane system, suitable for crane rails made from system profiles type KBK 2 and KBK II L. Type: DRF 200-B14-1-43, serial no.: 45950995. Travel speed: approx. 40 m/min = 0.67 m/sec. Motor power: 0.37 kW. Power supply: 400 Volt, 50 Hz. Drive motor: DEMAG, type ZBA 71 A2 B007. KBK 2 / KBK2L trolley for suspension in crane track. Wheel diameter: 82 mm, wheel width: 21 mm, trolley width: 78 mm. Pjdsw Nxyyjpfx Aazerb Space requirement (L x W x H): 410 x 320 x 470 mm. Weight: 28 kg. In good condition.

Condition: used, machine/vehicle number: WW12699, Product information "Oil mist filter Filtermist FX5002" Oil mist filter Filtermist Podpfx Aaozm Itvjzjrb Type/Model: FX5002 Condition: Used Technical data Air flow rate: 1675 m³/h (at 50 Hz) Motor: 1.5 kW / 400 V Dimensions (L x W x H): approx. 600 mm x 420 mm x 780 mm Weight: approx. 39 kg Inquiry item! Shipping costs will be provided in a separate quote.

Condition: new, functionality: fully functional, power: 235.36 kW (320.00 HP), axle configuration: 4x4, fuel: diesel, color: red, gearing type: semi-automatic, emission class: euro6, Year of construction: 2025, Equipment: air conditioning, airbag, all wheel drive, central locking, differential lock, trailer coupling, From our portfolio of new vehicles, we offer: TLF 4000 All-wheel drive on an off-road MAN TGM 18.320 all-wheel chassis Our Water Buffalo on MAN Hardly any terrain is too difficult for it. Calm and powerful, it reliably delivers its load to the destination. At the incident site, it demonstrates its full capabilities—transporting crew, equipment, and sufficient extinguishing agents to the scene, supported by a high-performance pump. Prsdpfxjxzu Eho Aazeb Chassis: • MAN TGM 18.320 4x4 EURO 6 with 320 HP (235 kW) • Automated transmission • Off-road tires • Single wide tires matched to track width for maximum off-road capability Cab: • Standard crew cab (1+5) in RAL 3000 (fire red) • Air conditioning and auxiliary heater • Standard 4 SCBA mounts in the crew compartment Superstructure: • High-quality frame-style superstructure made from stainless and corrosion-resistant materials • Folding steps for each side-mounted equipment compartment • Individually customised stainless steel equipment storage solutions • Walkable, non-slip vehicle roof Vehicle pump / Extinguishing agent tank: • Maintenance-free combined normal/high-pressure pump TITAN S40HP FPN 4000-10 • PUMP & ROLL capable • Output: 4,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, infinitely variable foam proportioning system • Water tank 5,000 l with integrated 500 l foam agent tank • Auxiliary heater in the pump compartment Firefighting equipment: • High-pressure rapid intervention reel with 50 m rigid hose • Roof-mounted foam/water monitor, 2,000 l/min • Self-protection system with 4 spray nozzles in front of the wheels Safety and lighting: • LED lightbar on the roof / 2 LED front flashers • Pneumatic special signal system Martin-Horn • 100 W PA system with announcement unit • Rear-view camera • Comprehensive LED lighting in crew and all equipment compartments • LED scene lighting on the superstructure and additional spotlight • Pneumatic LED light mast with remote control • Hygiene board available on request We would be happy to provide you with a detailed offer and present the vehicle to you at our site in Berlin. All details provided to the best of our knowledge and belief, without guarantee for completeness or accuracy. This advertisement constitutes information and is not a binding offer. Subject to prior sale!

Condition: used, Year of construction: 1969, Filter format: 600mm×600mm, throughput: approx. 45hl/h, number of plates: 17, number of frames: 16, number of end plates: 2, inlet and outlet pressure gauges: included, overall length: approx. 3200mm, overall width: approx. 800mm. The machine is equipped with all seals and is ready for use. An on-site inspection is possible. Psdpsz Atzkjfx Aazjrb

Condition: used, Year of construction: 2024, New machine – special price – year of manufacture 2024. HAND GUARD Edition Single Flex, unit. Image included. The HAND GUARD system is based on the early detection of a hazardous situation and thus protects the user from injuries. It functions in every camera-based system and initially warns the user visually to indicate an impending danger. If the danger persists, the saw blade is lowered without damaging the machine or the material. HAND GUARD supports the processing of various materials, such as wood, metal, and plastic. • Contactless and injury-free • Quick start-up • 100% damage-free • Works with concealed cuts • Does not need to be deactivated, permanent function • Max. 500 mm saw blade diameter, fully retractable under a single-sided pivoting saw unit. Pivoting range: 0 - 46°, equipped with a quick-change system for the main saw blade. Motorized height and pivoting adjustment and a maximum saw blade overhang of 179 mm. (Partial installation of the scoring unit required). In addition, there is the control unit at eye level, with which you can adjust the height and pivoting of the saw blade, plus, depending on the choice of the control package, the speed and other functions. The new, clear industrial design marks the exceptional position of the Altendorf brand: In this panel saw, distinctive design meets timeless aesthetics. The Altendorf double carriage is famous for its smooth running and precise movement. It can be locked steplessly at any position. The large double rollers keep the upper carriage in absolute connection with the lower carriage in the respective guide rods. This running quality is maintained even under decades of stress and contamination. The carriage construction is designed as an extremely torsion-resistant and dimensionally stable multi-chamber system. In addition, there is a front support roller with a width of 300 mm, which provides helpful support when cutting long workpieces on the parallel fence. Positionable 90° under the double carriage. 12" touchscreen with integrated keyboard • Automatic dimension correction on the parallel and mitre fence when pivoting the saw unit Pedpfxsyyap Ej Aazjrb • Stepless fine adjustment of the axes via +/# buttons • Easy calibration of the axis • Machine diagnostics, operating hour counter, USB interface • Calling up the last dimension input (back function) • Conversion from peak to butt dimension on the parallel and mitre fence • Shift-cut function with automatic determination of missing angles or dimensions • Extended tool management for max. 100 storable tools • Storage of the scoring position (3-axis scoring unit) • Storage of the thickness and cutting width of the main tool • Storage of the speed of the main tool Additional functions: • Grooving: with automatic step-by-step positioning of the parallel fence • Chain dimension function: cutting sequences with the same distance on the parallel fence • Miter cut with allowance • Calculator function with result transfer to the axes • Geometric shapes, determination of missing angles or dimensions • Bevel cuts, determination of missing angles or dimensions • 9999 storable cutting programs • Standard preparation for remote maintenance • Template holder directly next to the touchscreen Accessories included in the Edition Single Flex: • Double carriage with a carriage length of 3000 mm • Vario drive 5.5 kW (7.5 hp) VAR

Condition: excellent (used), Catalog number: 7734 TECHNICAL SPECIFICATIONS - Shaft width: 630mm - Max thickness of workpiece: 230mm - 4-knife planing shaft * Top: - Ratchets - Toothed infeed shaft, pulling - Pressure roller - Planing shaft - Pressure roller Pjdpfoztxg Tox Aazjrb - 2 smooth, pulling outfeed shafts * Bottom: - Adjustable roller in the lower bed - Motor approx. 7.5kW - Smooth feed speed adjustment - Diameter of dust extraction nozzle: 145mm - Dimensions L/W/H: 1250x1300x1300mm - Weight: 908kg ADVANTAGES - Made in Italy - Very good condition - Used thickness planer Net price: 19900 PLN Net price: 4630 EUR, depending on the exchange rate of 4.3 EUR (Prices are subject to change due to fluctuations in the exchange rate)

Condition: used, There are three May MKN1-100/6 toggle-type presses available, ram stroke: 60mm, pressing force: 100t, ram strokes: 60/min, flywheel speed: 620rpm, distance between bolster plate and ram, stroke at bottom/adjustment at top: 265mm, ram adjustment: 30mm, table surface: 640x404mm, ram surface diameter: 300mm, drive power: 5.5kW, operating voltage: 3~/380V, frequency: 50Hz, control voltage: 220V, lighting voltage: 220V, rated current: 17A, supply fuse: 25A, overhaul: 1984, an on-site inspection is possible. Prjdpez D Hzdofx Aazsb

Condition: used, Year of construction: 2001, Cutting width: 3300 mm Cutting length: 3350 mm Weight: approx. 4000 kg Saw blade projection: 100-(115) mm Saw carriage: Feed speed: 100-(130) m/min. Return speed: 100-(130) m/min. Main saw blade: 400-(430) mm Motor: 7.5-(11-13.2) kW Scoring unit: 215 mm Motor: 2.2 kW Pusher: Rapid feed: 160 m/min. Return speed: 60 m/min. Extraction: Air speed: 30-35 m/sec. Extraction nozzle: 200 mm / 115 mm Compressed air: Pressure: 5-6 bar Consumption: 20-30 l/min. Storage location: Nattheim Podpfjvvkqgsx Aazorb

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 227 kg, empty load weight: 1,179 kg, construction height: 1,970 mm, fuel type: electric, total length: 1,400 mm, drive type: Elektro, construction width: 810 mm, working height: 7,550 mm, Scissor lift Pedpfx Aasyr T H Tszorb Technical condition: New

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 227 kg, empty load weight: 1,179 kg, construction height: 1,970 mm, fuel type: electric, total length: 1,400 mm, drive type: Elektro, construction width: 810 mm, working height: 7,550 mm, Scissor lift Pedpfx Ajyr T Idjazerb Technical condition: New

Condition: used, Fanuc control with operating terminal Predpjyn R Tcjfx Aazjb Monitor: Fanuc series 180i-TB

Condition: used, Year of construction: 2005, FANUC Series Prodpfx Asyn R Uaeazsb Type: 160i-MB A02B-0281-B803 Welcome to the FANUC Series 160i-MB, Type A02B-0281-B803 – a top-quality product made in Japan, manufactured in 2005. This CNC control unit represents the advanced technology and reliability for which FANUC is renowned. It is the ideal choice for precision applications in manufacturing and automation. The FANUC Series 160i-MB delivers outstanding performance and versatility to meet the demands of challenging production environments. With its robust construction and advanced features, it enables precise control of machine tools and robots. As a product from Japan, a world leader in technology and quality, the FANUC Series 160i-MB stands for the highest standards in design and manufacturing. Every detail has been developed with the utmost care to ensure premium performance and durability. Experience the exceptional precision and performance of the FANUC Series 160i-MB and take your manufacturing processes to the next level. Discover the future of CNC control technology with this exemplary product from 2005, which continues to set standards even today.

Condition: used, Type:A06B-6127-H106 Works flawlessly. Psdpfxoyn R Uyj Aazsrb

Condition: used, FANUC A02B-0281-B803 controller Series 160i-MB Prjdpfx Aajyn R U Hjzeb Condition: Used (functional) incl. 7-day functional warranty

Condition: used, FANUC SERVO AMPLIFIER Condition: As good as new Predpfx Ajyn Sawjazeb Type: A06B-6290-H207

Condition: used, SIEMENS Drives Masterdrive MC Pedpfxoylcu Ho Aazorb Works flawlessly.