Used Manual Plate Shears for sale (22,307)

Condition: used, sheet width 2000 mm Nlodpfx Ahoxfwdzezsb plate thickness 3 mm rear stop von Hand, 750 mm dimensions ca. 2800 x 1120 x 1510 mm weight ca. 1800 kg

Condition: new, Lever shears for cutting of sheet metal, flat, round and square steel Working length ----- 200 mm Nodpfega T Hnox Ahzslb Sheet thickness ----- 5 mm Flat steel ----- 70 x 5 mm Round steel ----- 13 mm Weight ----- 19 kg

Condition: good (used), Year of construction: 1995, Max. cutting length 3050 mm Material thickness 37 kg/mm² 12 mm Material thickness 70 kg/mm² 8 mm Cutting angle 1.8 degrees Stroke rate 8 - 13 min. Number of hold-down clamps 12 Drive power 18.5 kW Dimensions L x W x H 4150 x 1950 x 1950 mm Weight 8000 kg Accessories / Special features: • ELGO Type 71 motorized NC positioning control for the backgauge, length approx. 900 mm Nljdpfxsvkw Dvo Ahzsb • If necessary, the toggle lever system allows the machine to operate with only one cylinder at a reduced cutting capacity of approximately 55% of the nominal capacity. This simultaneously increases the cutting sequence for more efficient work with thin sheet metal. Switching from fast to slow is done using a selector switch on the control panel. • Hydro-mechanical drive via a powerful toggle lever • Easy cutting gap adjustment on both sides • 2 cylinders mounted externally on the machine, easily accessible • Vertical, stable guides • Upper and lower blades each with 4 cutting edges • Hydraulic overload protection • Proportional force of the hold-down clamps • The machine frame is a fully welded construction and is machined in one setup (no screwed parts) • Portable electric foot switch • Blades suitable for black sheet metal and stainless steel • Ball transfer units in the table • 1 angle stop • 1 support arm • CE-compliant Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1997, sheet width 0610 mm plate thickness 1,5 mm distance between columns 650 mm front stop - adjustable 0- 300 mm Nodpfx Ahsxu Nrpszslb angle stop 45-90 Grad operating pressure 6 bar strokes per minute 60 total power requirement 3 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 1 x 1 x 1,5 m

Condition: used, Year of construction: 1971, sheet width 2000 mm plate thickness 16 bei St 42 mm passage width 2250 mm impact length 1000 mm blade length 2005 mm throat 600 mm cutting gap adjustment 0,05 - 0,95 mm cutting angle 1° 40' ° down holder 10 Stück back stop - adjustable 10 - 1000 mm table: 2500 x 700 table height over floor 800 mm quantity of oil 900 l weight of the machine ca. 10 t Nedpfjww Nccsx Ahzjlb dimensions of the machine ca. 3 x 2,3 x 2,3 m voltage 380 V Food switch, material support beams, spare knifes.

Year of construction: 2021, condition: new, - Capacity 1350 x 3 mm - Manually operated back gauge - Foot-operated Nlodpfx Ahjg Tmz Ujzsb - Photocell protection of the back gauge - Raised arms - Illuminated cutting line - Brake motor - Emergency stop - Documentations - 400V

Condition: new, back gauge: 750 mm, - Capacity 1050 x 6 mm - NC electric back gauge - Foot switch - Rear photocell protection - Support arms - Cutting line illumination - Brake motor - Emergency stop - Documentation - Weight 1800 kg - 400V Nljdpfx Ahogg N Hbezob

Condition: good (used), You are bidding on: a branded machine set – a folding machine from a renowned and well-known manufacturer – Schechtl HA and a guillotine shear RAS by Reinhard Maschinenbau Sindelfingen. Machine details: Folding machine: - Die rail bends cleanly – test possible on site - Angle display - Bending length slightly over 2.5m - Sheet metal capacity: 1.5 mm for steel – also suitable for aluminium, zinc, etc. - Standard die rail - Foot-operated closure - Current new price approx. €20,000 net Guillotine shear RAS: - Electrically operated guillotine shear up to 2mm steel – also suitable for aluminium, etc. - Cutting length: 2.5m - Extension table for special applications included in the price – can be mounted on the left side Nsdoyqytqepfx Ahzslb - Optional spare blades available - Adjustable depth gauge from the front - Many additional onsite tools and auxiliaries available as options - Machines can also be purchased individually Important: Optionally, you will also find a wide range of machines and equipment for sheet metal and steel processing on offer in our shop, including various rails, depth gauges – everything relating to bending and shearing, such as press brakes, guillotine shears, drilling machines, slip rolls, slitting and profiling machines, accessories (beading devices, round rollers for gutter fabrication, back gauges, etc.), as well as hand tools and spare parts from many top manufacturers in stock. Please feel free to contact me for any questions. You will receive an invoice in accordance with § 25a UstG, VAT is included in the invoice amount (margin taxation system). Free loading available – approx. weight: bending machine about 1900 kg, shear about 1600 kg. Inspection and testing are possible and encouraged by prior phone appointment. Payment in cash upon collection. Benefit from our experience and expertise – we are happy to advise you. Collection by the buyer (or a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways. Article number: Folding machine RAS 251009

Condition: used, functionality: fully functional, Year of construction: 1987, machine/vehicle number: 101536, Offered for sale is a hydraulic guillotine shear Manufacturer: Eisen und Hammerschmidt GmbH Model: TSS4-20 Year of manufacture: 1987 Serial No.: 101536 Capacity: 4 mm Working width: 2,000 mm Control: ELGO Type P8511 Light curtain system by SICK Used, fully functional condition. Collection by purchaser; assistance with dismantling/transport can be arranged if required. — If you are interested or have any questions, please feel free to send me a message. Viewing on site by appointment possible. Further metalworking machinery such as bench drills, press brakes, column drilling machines, eccentric presses, heavy-duty racking, welding tables, MIG welders, compressors, etc. – please take a look at my other listings. Nsdpfx Ajx Da D Ujhzslb Location for viewing and collection: 12277 Berlin Domestic price net plus VAT or Net export price Collection only – dismantling and transport by buyer or by arrangement. If you are interested or have any questions, please feel free to send me a message. Further photos and technical details available on request. All information is subject to change without notice. Errors and prior sale reserved. For further questions, please call Nous parlons Français / Мы говорим по-русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype We handle all customs and registration matters for an additional charge. For an extra fee, we can transfer the vehicles to the port.

Condition: used, Year of construction: 1994, sheet width 3050 mm plate thickness 16 mm distance between columns 3050 mm Nlsdpjxz Hg Djfx Ahzjb 15-1000 mm cutting angle adjustment ja ° cutting gap adjustment ja mm connected load 30 kW weight of the machine ca. 14,.5 t dimensions of the machine ca. 4,0 x 260 x 2,55 m Hydraulic guillotine shear with - ELGO control for backgauge - Cutting angle adjustment - Cutting length adjustment - Cutting length limitation (time dependent) - Sheet thickness adjustment - Back gauge with clearance function - Cutting line lighting - Side stop - 3 pcs. support consoles - good condition

Year of construction: 2022, condition: used, sheet width 1550 mm plate thickness 3 mm distance between columns 1600 mm back stop - adjustable 600 mm connected load 3 kW weight of the machine ca. 1,1 t dimensions 2,06 x 2,14 x 1,21 m Demonstration machine with small paint damage. The machine works quietly and is powered by its geared motor Nodpfx Ajfv H Dnshzslb Braking system energy-saving. Our machine is welded as a monobloc body from ST42 quality material. The knives of the machine are of 2379 quality and the brand name is BOHLER. These high-quality knives guarantee precise cutting. Emergency stop button, foot switch and finger guard are included standard equipment. (Documentation in English only)

Condition: new, sheet width 2050 mm plate thickness 3 mm distance between columns 2100 mm Nodpfjfv H Dksx Ahzelb back stop - adjustable 600 mm connected load kW weight of the machine ca. 1,1 t dimensions 2,7 x 2,1 x 1,4 m The machine works quietly and it is energy-saving by its gear motor and brake system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine.

Year of construction: 1964, condition: ready for operation (used), Sheet stop: 1000mm, max. cutting thickness: 10mm, cutting length: 3000mm, weight: approx. 8500kg. The machine complies with accident prevention regulations. The blades must be turned and reground. The drive motor was replaced 4 years ago. Documentation available. An on-site inspection is possible. Nljdpfxjym Dgao Ahzeb

Condition: used, Year of construction: 1984, plate width 3100 mm Nsdpfjtv Ihqex Ahzolb plate thickness 6 mm distance between columns 3150 mm no. of strokes 20 - 75 Hub/min cutting angle 0,5 - 1,25 ° down holder 16 Stück voltage 380 V frequency 50 Hz power capacity 10 kW weight of the machine ca. 6 t dimensions of the machine ca. 4,0 x 2,1 x 1,7 m with electr. back stop, 950 mm

Condition: used, Year of construction: 1981, sheet width 2600 mm plate thickness 5 mm rear stop 1000 mm cutting angle 1°06 ° no. of strokes 45 Hub/min voltage 380 V / 50 Hz total power requirement 5,5 kW weight 4500 kg dimensions of the machine ca. 3600 x 2200 x 1600 mm Equipment: Nledpfxsxuv Hys Ahzjb • elektric-motoric back stop • manual die clearance • 2 x lay-on arms • Foot switch • Knives as replacement

Condition: used, functionality: fully functional, Year of construction: 2004, Hydraulic Guillotine Shear Make: ERMAKSAN Model: HGS 3100x6 Year: 2004 Technical Data: Manufacturer: ERMAKSAN Model: HGS 3100x6 Year of Manufacture: 2004 Sheet Width: 3,100 mm Sheet Thickness: 6 mm Cutting Angle: 1.2° Strokes per Minute: 18 Number of Hold-Downs: 15 Nsdpfoxrtxuox Ahzelb Motor Power: 11 kW Back Gauge: 1,000 mm Space Requirement: L 3.8 x W 2.2 (plus support arms) x H 1.6 m Machine Weight: 5.5 t Equipment: • Angular stop • Support arms • Programmable 1,000 mm back gauge via ELGO controller • Automatic blade gap adjustment • Pneumatic sheet support device • Cutting length limiter • Folding finger guard • Light barrier for rear area safety All information is provided without guarantee. A powered demonstration is available at any time in our showroom.

Condition: used, functionality: fully functional, Year of construction: 1989, Hydraulic Guillotine Shear Make: SAFAN Model: VS 255-8 Year: 1989 Nljdexhc Svopfx Ahzeb Technical Data: Manufacturer: SAFAN Model: VS 255 - 8 Year of manufacture: 1989 Working Length: 2550 mm Sheet Thickness: 8 mm Motor Power: 11 kW Sheet Hold-Downs: 24 Cutting Angle: min. 0.5° / max. 1.5° Dimensions: L 3.50 x W 2.50 (plus support arms 1.6 m) x H 1.95 m Weight: approx. 8 t Equipment: • Angle gauge • 2 x support arms • Motorized backgauge 1000 mm with digital readout • Pneumatic sheet support device • Adjustable cutting angle • Manual blade gap adjustment • Cutting length limit All information subject to change without notice. A demonstration is possible at any time in our showroom.

Condition: excellent (used), Year of construction: 2014, actuation type: hydraulic, working width: 3,100 mm, stroke rate (min.): 13 1/min, sheet thickness (max.): 10 mm, table height: 800 mm, back gauge: 1,000 mm, power: 22 kW (29.91 HP), Equipment: CE marking, emergency stop, finger protection, foot remote control, safety light barrier, We hereby offer you a hydraulic swing beam shear of the brand "ERMAKSON", used, in very good condition. Nsdsxvinmepfx Ahzslb Please feel free to contact us for a quote.

Condition: used, Year of construction: 2001, - Year of manufacture: 2001 Specifications - Cutting length: 3100 mm - Capacity: 16 mm - Stroke: 170 mm - Strokes per minute: 10 - Oil tank: 410 l - Motor power: 37 kW Njdpfexa Acljx Ahzelb - Operating voltage: 400 V - Rated current: 72 A - Main fuse rated current: 100 A - Dimensions (W x H x D): 3750 x 2400 x 3425 mm - Weight: 13800 kg

Condition: used, Measuring machine with manually operated measuring arm STIEFELMAYER high-precision measuring and scribing plate, cast steel/grey cast iron, heavily ribbed Machine no. 22890285 Year of manufacture 1985 Length 2500 mm Width 1500 mm Thickness 350 mm Plate thickness (top) 50 mm solid material with 300 mm ribs Working height approx. 800 mm Nljdpfekdnwbsx Ahzob - with manually movable measuring arm, measuring range X = 1970 mm, Y = 815 mm, Z = 840 mm - with 3-axis digital display Grundig MZ 1030 - 5 height-adjustable feet Required space L x W x H 2500 x 1500 x 2500 mm Weight 3000 kg very good surface finish

Year of construction: 1988, condition: used, sheet width 1500 mm Nlsdpolp U Txsfx Ahzeb plate thickness 3 mm weight of the machine ca. 4 t dimensions of the machine ca. BxTxH 2000x1500x1800 mm

Condition: used, Circular shears with motor drive FASTI Type 502 - 10 - 2 Machine no. No. 9252 009 Year of construction 1992 Material thickness max. 2 mm (400N/mm²) Maximum circular blank diameter 1000 mm Minimum blank diameter 100 mm Cutting shaft speed 60 and 120 rpm Cutting speed 12 and 24 m/min. Blade holder Ø 20 mm Knife diameter Ø 65 mm Projection of the clamping plate 720 mm Nledpfx Aou Rimmehzob Projection of the cutting wheel 280 mm Motor power 1.1 / 1.4 kW Mains connection 380 Volt, 50 Hz - 2 motor speeds - Mechanical clamping tip - Scale on the clamping bracket - electric foot switch - 1 set of cutting blades - Operating instructions with electrical diagram in PDF format Space requirement L x W x H 1600 x 660 x 1350 mm weight 320 kg good condition

Condition: good (used), functionality: fully functional, Year of construction: 1994, Used SCHRÖDER motorized guillotine shear, type MHSU, built in 1994, No. 121204 Usable length: 1030 mm Max. sheet thickness: 2.5 mm - Pneumatic hold-down device - Front support arms 1000 mm - Digital back gauge 750 mm - Right-angle stop - Sheet support device - Forward sheet slide Nodpfx Ajv Tzphjhzolb - Rear area protection with protective cage - Foot switch The machine is in stock at our location in 71334 Waiblingen-Beinstein and is available immediately.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1994, control type: NC control, degree of automation: semi-automatic, actuation type: electric, sheet thickness steel (max.): 5 mm, back gauge adjustment: motor-driven, back gauge: 1,000 mm, power: 17 kW (23.11 HP), Equipment: angle stop, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, Guillotine shear, regularly serviced, complete with manual, wiring diagram, and new UVV, for sale due to production restructuring. Nodpfx Ahsw Uq U Tjzelb

Condition: new, Year of construction: 2025, neu 2025 090132 prompt, Zwischenverkauf v Türkei 47500 € 798.38 € 1 41800 € 3100 mm 6 mm 4 mm 50 mm 15 1/min 1.5 ° 16 14 to 1000 mm 200 mm/s 15 kW 200 l 2 Stk. 865 mm 500 mm 3515 mm 4110 mm 2200 mm 3700 mm 2100 mm 7300 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Nlodpfx Aswiqyyehzeb Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength for economic processing Lower blade fourfold turnable Upper blade double turnable Oilfilling Light barrier on the back of the machine Qualified customer support User manual in GERMAN and ENGLISH according to CE rules WE HAVE MORE THAN 850 REFERENCES!