Used Poly-Clip Fca50 for sale (727)

Condition: good (used), Technical data for the pallet racking crossbar: Racking system: META (Thyssen) Psdpfxslnbp Es Abujgu Included in the scope of delivery: 1x Pallet racking crossbar, used Material color: orange Crossbar type: HN 100|20 Box profile: 100 x 50 mm Clip: 4 HK (hooks) Clear width: 3,300 mm 2x Locking pins, used Design: fully galvanized For securing the longitudinal beams to prevent unintentional lifting out.

Condition: like new (used), Your contacts within our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Technical data for the pallet racking crossbeam: Racking system: SSI Schäfer Type: PR 600 Included in the scope of delivery: 01x Pallet racking crossbeam, 2nd choice Material color: RAL 5010 Gentian Blue Crossbeam type: Head crossbeam U-profile: 70x42 mm Clip: 5 hooks Clear width: approx. 1,970 mm Max. load per crossbeam pair: 600 kg, with evenly distributed load 02x Locking pins, 2nd choice Design: fully galvanized For securing the longitudinal beams against unintentional lifting out Further information / data: These crossbeams / longitudinal members can be used in pallet racking as a storage compartment for boxes / cartons, etc. The storage of Euro pallets / pallets is not permitted on these crossbeams. The maximum load per crossbeam pair is approximately 600 kg. General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery. Our services at a glance: (Prices on request) Assembly, installation our general assembly conditions apply Racking inspection Pedshryi Iopfx Abuogu Racking inspection according to DIN EN 15635, performed in accordance with the requirements of BGR 234, visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: new, NEW MACHINE Pedjci Tliopfx Abuegu - double sided belt linishing and polishing machine, different configurations possible, for working in seated or upright position - linishing / linishing - linishing / polishing - polishing / polishing Motor 4, 5.5 or 7.5 kW, polishing wheel max. 120 x 500 mm, max. diam. contact wheel 400 mm, linishing belt 50 x 3500 mm - 3 different speeds can be choosen: 700, 800, 900, 1000, 1120, 1250, 1400, 1600, 1800, 2000, 2240, 2500, or 2800 rpm

Year of construction: 1970, condition: used, Headstock can be manually adjusted transversely: 600 mm Spindle can be manually adjusted in height on the column: 1200 mm Hydraulic automatic vertical movement: 900 mm Pedpfsb N Dgmsx Abujgu Hydraulic automatic transverse movement: 200 mm Maximum distance between table and spindle mounting (long spindle): 600 mm Drive motor: 380 V, 2800 rpm, 5.5 kW Table diameter: 550 mm Space requirement: 1600 x 1200 x 3200 mm Weight approx.: 1.2 t Hydraulic unit: 2.2 kW; space requirement: 800 x 800 x 1200 mm; weight approx.: 300 kg

Condition: new, Year of construction: 2025, PFEIFER technology skyCUBE P class 1250 x 1250mm - 200W CO2 laser The flatbed laser center (* Prices depending on equipment, this is a brand new laser machine from our production) The multifunctional flatbed laser center skyCUBE, produced by PFEIFER technology in Saxony/Germany, was developed for your professional cutting tasks and classic laser engravings. It combines high productivity with economy and precision. Your purchase will therefore pay for itself after a short time. The machine housing, made of welded and screwed steel construction, is designed for industrial and commercial use. The drive system developed by PFEIFER technology ensures precision and high repeat accuracy. skyCUBE laser devices meet all requirements of class 1 according to DIN EN 60825-1 and thus offer you the highest level of safety. The ergonomic design with a pull-out work table makes it easier to load the system. A drawer in the lower part of the machine is used to collect the clippings. Simple, user-friendly and intuitive - the skyCUBE PC software makes planning, executing and controlling your production tasks child's play. The processing of your project data takes place via levels (colors), whereby the order and processing type can be specified separately for each level. The determined parameters can be permanently stored and retrieved in a material database. The laser programs are transferred to the machine control with a computer connected via a LAN/USB interface. A modern touch control panel gives you access to all system information and functions. Pgodocwpkpjpfx Abueu Laser processing center skyCUBE at a glance: German industry standard Machine steel construction for safe and vibration-free accommodation of the laser components and axis systems, on rollable industrial leveling feet 8" touchscreen display simply see more, control more, communicate more with the skyCUBE laser processing center Redundant safety system - Class 1 laser Safety: Shutter --ᐳ active mechanical beam path shutter pull-out work table drawer integrated access and observation hatch pull-out clippings drawer Air-washed optics - filtered air supply to all laser components to protect the optics program-controlled process gas control Drive system developed by PFEIFER technology for precision and high repeatability PFEIFER technology mirrors and optics for perfect results with laser engraving and cutting CO2 laser IRADION®, SYNRAD®, laser sources for perfect laser beam quality and quality over a long period of time tested and stable brand power supplies according to the laser source illuminated machine interior Easy-to-learn operation even without advanced CAD knowledge Safety: BG certified emergency stop / door and safety monitoring Security: Key switch to prevent unauthorized use of the system central vacuum engraving cut fume extraction port Multifunctional cutting table with low-reflection, removable support elements for laser material processing Optionally available: Laser source and optical system according to application specifications PFEIFER technology linear motor for X/Y axis

Year of construction: 2025, condition: as good as new (ex-display), Single-column table-top machine max. testing force 2.5 kN, most modern WINDOWS software (freely programmable test sequences), over 600 finished test results, Machine price WITHOUT clamping device as the final equipment is based on your requirements: included in the price: - Machine in working order - incl. load cell 2,5 kN (grade 05 from 25 - 2500 N / grade 1 from 5 - 25 N - Warranty 24 months - Software LabTest - unsurpassed flexibility, complete software - without clamping tool - without delivery (distance-dependent) - incl. DAkkS (DKD) calibration Optional: - Mechanical clamping device - Hydraulic clamping tool - Bending tools - compression plates - Clip-on extensometer - Probe arm extensometer - Video extensometer - Laser speckle extensometer - Climate chambers - High temperature / hot draft furnaces Psdpjcw Ix Ssfx Abuegu ... just everything that is necessary for mechanical material testing up to the LASER TECH (optical laser speckle strain gauge for non-contact strain measurement of metal, plastic ... Ask also for other sizes. We offer new machines on the quality level of the market leader at prices of used machines.

Condition: used, Double-sided grinding and polishing machine, MEYER, type SMP Machine no. 848, year of manufacture 1963 Grinding and polishing disc diameter, max. 800 mm Shaft diameter 50 mm Grinding disc mounting, Ø 305 mm Disc spacing 1470 mm Working height 550 mm Speed 710 / 800 / 950 rpm Drive power 2 x 3 kW Mains connection 380 volts, 50 Hz - Two drive motors, one for each working side - Star-delta switch for each drive motor Psdpedzqmhjfx Abujgu - Speed change by switching the drive belts - Dust extraction flange, Ø 100 mm - Two corundum grinding discs, 40 mm wide, approx. Ø 560 / 480 mm, are installed Space requirement L x W x H 1700 x 1200 x 900 mm Weight 850 kg Good condition

Condition: good (used), Polishing / buffing machine HAU HR 4 for circular parts up to 200 mm max., with 2 working units, units equipped with reconditioned spray systems for liquid polishing compound, wheel diam. max. 400 mm, width polishing wheel max. 120 mm, shaft diam. 35 mm, machine similar to picture Pgodpfx Abezmbhjueu

Condition: good (used), Quick-change chuck, quick-change holder, quick-change head, keyless drill holder, milling holder, quick-change insert, collet chuck, reducing sleeves, clip-on holder -Quick change chuck: Mounting: MK3 / 32 mm -Dimensions: see photos Pjdpforvldxox Abuegu -Quantity: 14 pieces available -Price per piece -Dimensions: Ø 62 x 175 mm -Weight: 1.2 kg/piece

Condition: used, Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, milling holder, quick-change insert, collet chuck, reducing sleeves, clip-on holder Pgjdpfx Absrvlf Douju -Quick-change chuck: Recording: MK4 / 40 mm -Dimensions: see photos -Quantity: 12x quick-change chucks available -Price per piece -Dimensions: Ø 72 x 215 mm -Weight: 2.1 kg/pc.

Condition: used, Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, milling holder, quick-change insert, collet chuck, reducing sleeves, clip-on holder Pgedpfx Aborv Avreusu -Quick-change chuck: Recording: MK3 / 28 mm -Dimensions: see photos -Quantity: 1x quick-change chuck available -Dimensions: Ø 58 x 190 mm -Weight: 1.1 kg

Condition: new, Technical data for the pallet racking crossbar: Racking system: SSI Schäfer Type: PR 600 Included in the scope of delivery: 01x Pallet racking crossbar, new Material color: RAL7035 light gray Box profile: 80 x 40 mm Crossbar type: TRV1-240-084-30CE Clip: 5 hooks Clear width: 2,400 mm 02x Locking pins, new Pgsdpfsir U D Rjx Abueu Design: fully galvanized For securing the longitudinal beams against unintentional lifting out.

Condition: good (used), machine/vehicle number: RTT HAU T3, Used rotary table polishing machine Manufacturer: Hau Pgedsh Ug Ulspfx Abusu Rotary table with 6 working spindles and 3 polishing stations with high-pressure nozzles, 5.5 kW motors, control cabinet.

Condition: new, empty load weight: 420 kg, maximum load weight: 880 kg, overall weight: 1,300 kg, loading space length: 2,980 mm, loading space width: 1,520 mm, loading space height: 1,650 mm, tire size: 165r13c, Cargo-Poly2 box trailer with side door from the manufacturer Cheval Liberte / Debon. Aesthetically pleasing and aerodynamic box trailer with a polyester body, available in various colors. The handling of this car trailer is excellent. The box trailer is equipped with the Pullman2 suspension. A low entry height of only 35 cm ensures a low center of gravity, which is ideal for optimal driving characteristics. In addition, there is the independent wheel suspension with longitudinal arms, coil spring, and shock absorber according to automotive standards. The low loading height ensures a shallow approach angle for loading vehicles such as motorcycles and quads. For other cargo, this trailer also has a ramp that can also be opened as a side door to load, for example, pallets. The car trailer is equipped with a polyester body, ramp-door system, side door, 100 km/h rating, rear supports, interior light, support wheel, lashing eyes, a robust frame, and a V-shaped drawbar. As accessories, we offer motorcycle cradles, motorcycle stand rails, motorcycle lashing straps, lashing straps, and additional lashing eyes. The body is splash-proof. --- You can also find all our cost-effective offers on our website. Germany-wide delivery (except to islands) is possible! Please feel free to ask us about the prices. Pgodpeidzp Rjfx Abusu --- PKW-Anhänger-Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Tel: 0 Fax: Collection times: Monday - Friday – [Time] Collection is not possible on Saturdays!

Condition: new, functionality: fully functional, machine/vehicle number: 12412802, empty load weight: 540 kg, maximum load weight: 760 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 3,150 mm, loading space width: 1,640 mm, loading space height: 2,370 mm, Year of construction: 2026, Loading dimensions approx. 1640 mm x 3150 mm x 2000 mm External dimensions approx. 2150 mm x 4450 mm x 2370 mm Gross vehicle weight: 1300 kg Payload: approx. 760 kg (payload varies depending on additional equipment) Manufacturer: Debon Features - Aluminium box body - Polyester roof and front (aerodynamic) Psdpoq T R R Tefx Abuogu - Pullman V2 low-floor chassis - Floor plate: aluminium floor (anti-slip) - Door/ramp combination (aluminium) - Shock absorbers installed including 100 km/h certification - Lockable side door - Interior lighting with switch - 6 lashing rings on loading floor - Vehicle documents included Additional equipment - Rear supports - Wheel chocks and holders Chassis - Pullman V2 | coil spring suspension and shock absorber | V-drawbar with ball coupling | automatic heavy-duty jockey wheel Electrics - 12 volt | 13-pin connector | marker lights | fog light If you wish to purchase this trailer or have further questions about trailers, please refer to our internal flatbed trailer number "12412802".

Condition: good (used), Polishing stand Brush width: 50 mm Pjdpfx Ajd Am Dlsbuegu Space required: W 1050 x D 540 x H 560 mm

Year of construction: 1998, condition: good (used), machine/vehicle number: PM 1000_01, 1 polishing machine for robotic machining sold. Design: 1 x left-hand version Pgodped S R Agefx Abuju Manufacturer: SHL Polishing disc diameter: 1000 mm Drive power: 7.5 kW Includes: Exhaust flap

Year of construction: 2024, condition: new, The DA-69T control system offers both 2D and 3D programming, which includes automatic calculation of the bending sequence and collision detection. The complete 3D machine setup includes multiple tool stations and provides immediate feedback on the feasibility and handling of the product. Delem-69T features: • 3D and 2D graphical touchscreen programming • 3D representation in simulation and production • 17-inch TFT color display with high resolution • Complete Windows Application Suite • Compatible with Delem Modusys (modular scalability and adaptability) • USB, peripheral interface • Open system architecture • Sensor-based bending and correction interface • Profile-T3D offline software Pgsdjd Tpadopfx Abuju • Significant contribution to environmental protection; climate change and the greenhouse effect will thank us, as will future generations! AD-S 30175 with Y1, Y2, X, and R axes Bending force: 175 tons Bending length: 3050 mm Distance between stands: 2600 mm Rapid traverse speed: 120 mm/sec Working speed: 10 mm/sec Return speed: 100 mm/sec Installation height for tool clearance and the penetration depth of your press brake: 30 mm Table width: 104 mm Table height: 900 mm Stroke: 265 mm Overhang: 410 mm Support arms: 2 pcs Backstops: 2 pcs Press force and speed of the press brake. X-axis: 500 mm/sec X-axis travel direction: 650 mm Speed of the R-axis max.: 350 mm/sec R-axis travel direction: 250 mm Motor power: 18.5 kW Oil tank capacity: 250 liters Length: 4250 mm Width: 1700 mm Height: 2750 mm Weight approx. 11500 kg Control system: Delem-69 T Options: Y1, Y2, X, R (4 axes) X=650mm X, R Control system - CNC Cybelec ModEva 19T DBEND 3D CAD/CAM import & simulation program CNC-controlled motorized crowning Adjustable front support arms with T-slot, clip stop, and guide along the entire line Rear stop: Siemens DC servo motor & linear guide & ball screw system Protective cover CE standard with manual Fiessler AKAS II M - FPSC-B-C (SAFETY PLC) Wila Hyd. top - NSCL-I-HC/UPB - PRO - Max load 180 t/m - Power pack required Wila Hyd. bottom - NSCR-I-HC-CNC/UPB - PRO - Max load 200 t/m - Power pack required Power pack for hydraulic clamping DAM (Durma angle measuring system) 2 YEAR WARRANTY The machine can be inspected and demonstrated at any time by appointment at our showroom in Staufenberg. Other machines are available for demonstration at our location in Staufenberg. Upon request, we will gladly provide you with further information.

Condition: as good as new (ex-display), machine/vehicle number: PM1000_ERB, A polishing machine for robotic processing is being sold. Manufacturer: SHL Polishing discs, diameter 1,000 mm Drive power: 5.5 kW Pjdpfsd Hh Txex Abuegu

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. weight 1500 kg Dimensions (L/W/H) 4800x1600x2400 mm Psdjd Ih Hqjpfx Abujgu Width mit Auflage 2300 mm Götzinger Power Drill Type BF 315 With the Götzinger PowerDrill you can, depending on the type and design: Griffoliven drill on the loose frame part or for finished wings, with multi-spindle drilling head, quick-change, also for milling of the lock case for WK 2 or intermediate gear Ecklager drill on loose frame part, with Mehrspindelbohrkopf, quick-change, corner-oriented over stop or custom made (tilt window) Drill vertically from above for fitting, pre-drill for clip on loose frame part Milling vertically from above for pushers, profile cylinders, 3-D hinges Horizontal drilling with 2 drilling units, different drilling diameters, Dowel drill front and long side, plywood / fighter, sprouts, Corner connection, front door etc. Milling horizontally for lock case / fitting etc. machine description Base frame in stable welded construction, linear guide for the X-axis Table top 3,000 x 200 mm 6 clamping cylinder pneumatic with auto. Ausweichhub 2 side stops for machining on the front side, manually swiveling in and out 2 longitudinal stops can be manually swiveled in and out Travel: X-axis - 3,000 mm working length Y-axis - 120 mm Z-axis - 105 mm Aggregate: 1 drilling unit (unit 1) vertically from above, drill motor 1,1 KW Speed ??1,500 - 12,000 rpm, 1 spindle, collet holder ER 20 1 Bohraggreagt (unit 2) vertically from above, drill motor 1,1 KW Speed ??3,000 rpm, with drill head quick change device 1 boring head BKF 3, olives, quick-change 1 boring head BKF 3/2 corner bearing, quick-change 1 milling unit (Agg.3) vertically from above, milling motor 2 KW, 1,500 - 16,000 rpm, collet holder ER 25 2 horizontal drilling units (Agg.4 and 5) 1.0 KW, 1.500 - 12.000 U / min, Collet holder ER 20 1 milling unit horizontal (Agg.3) 2.0 KW, 1.500 - 16.000U / min, Collet holder ER 20 Electro-pneumatic control with 3-axis control X, Y, Z NC positioning controller make B + R input via TFT display 10 " Machine complete with 1 set of drilling tools dm 6, 8, 10 and 12, 2 roughing carbide cutters HM dm 16, CE compliant, ready for connection Suction connection: 1 x dm 120 Power connection: 1 x 400 V, 16 amps Air connection: 1 x LW 9 mm Dimensions: L x W x H = 4.80 x 1.60 x 2.40 m – Machine weight: 1,500 kg ----- Total price for the configuration listed above, ex works: upon request ----- ----- Options available at additional cost, upon request: - Stop for longitudinal drilling, height-controlled slot stop via NC axis - Online connection to window software; data cable must be provided on site (Klaes, Prologic 3E, Adulo) - CNC module for venetian blinds and circular milling -Remote maintenance module -Milling spindle with HSK mount -HSK 32 tool holder ----- Plus shipping and installation/training (Technical specifications according to the manufacturer—subject to change without notice!) Translated with (free version)

Year of construction: 2013, condition: excellent (used), functionality: fully functional, REF: MM6423 Complete weighing and bagging system which has previously been used to pack frozen peas and vegetarian products into pillow packs. This system comprises of the following equipment: 1 x Infeed swan-neck conveyor with flighted belt mounted on mobile frame (stored outside). Date of manufacture - 2013. Belt width - 245mm wide. Pgsdpfx Aey Um T Hjbueu 1 x Yamato Scale Dataweigh (UK) Ltd ADW-514AWCC 14-head multi-head weigher with dimple pans. Manufacturer - Yamato Scale Co., Ltd. Speed - up to 120 drops/minute (depending on product and weight). Weighing range - up to 1000g. Rated to IP66 (waterproof). 1 x Gantry unit with steps. Footprint dimensions - 5.7m long x 2.7m wide x 2.72m high. 1 x Gainsborough Engineering Ltd GV2K3 vertical form, fill and seal bagging machine. Manufacturer - Gainsborough Engineering Ltd. Date of manufacture - 2013. Sealing jaws: Horizontal - 360mm wide / Vertical - 420mm long. Packing speed - up to 60 packs/minute (depending on bag size). Bag size range: Smallest - 80mm wide x 80mm long / Largest - 320mm wide x 350mm long. Supplied with jaws for poly and laminate film, block-bottom and gusseted bags as well as 3 x forming tubes. Forming tubes: for forming pillow/’fin-seal’ packs measuring 130mm, 220mm and 270mm wide. 1 x Outfeed inclined conveyor. Belt dimensions – 2250mm long x 425mm wide. Outfeed height – 1000mmm. Some spare parts are also included. Videos available on request.

Condition: used, mileage: 4,710 km, power: 55 kW (74.78 HP), first registration: 07/2025, fuel type: diesel, color: white, next inspection (TÜV): 07/2026, driver cabin: other, gearing type: other, Year of construction: 2025, operating hours: 165 h, total length: 5,090 mm, total width: 1,420 mm, total height: 2,340 mm, maximum speed: 50 km/h, * 224901 Swingo 200+ 2 Brush System * 225101 Euromot 5 Engine 55 kW (75 hp) * 225201 500-hour Long Life Oil * 225404 50 km/h * 225300 Hydro-pneumatic Suspension * 231701 Noise Reduction for Cabin & Container * 187001 Steering Wheel Knob * 226502 Radio DAB+ * 226601 Rear View Camera * 226701 Suction Nozzle Camera * 226801 Reverse Warning System, Switchable * 226901 12 Volt Socket * 235001 Standard Monitor * 226301 3-Point Safety Belt for Driver * 226401 2-Point Belt (Lap Belt) for Passenger * 230501 Rotating Beacon, Foldable * 228503 Sweeper Brush, Mixed (Poly/Steel) * 228801 Rollers for Suction Nozzle instead of Skids * 227301 Independent Brush Control * 227401 C-Shaped Brush Arms * 228701 17 mm Rubber Suction Nozzle * 228901 Stainless Steel Container Pipe Pgodpfx Absz Sc T Ueuou * 229201 Hand Suction Hose Preparation * 190701 Standard Paint, RAL 9016 White * 1317SWINGO Operating Manual * 232601 Wheel Chock with Holder * 100901SWIN Modem Kit IntelliOPS Other: * Trade-in and purchase of vehicles and machines possible. * Sale price excludes transport and delivery. * No liability for printing and typographical errors. * Subject to errors, changes, and prior sale. * Offer subject to change. * Photos may vary. Price applies to the current condition. * All information without guarantee.

Condition: good (used), Standard holders and accessories, attachment holders, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Manufacturer: Sassex, clip-on holders, 4 pieces Pgjdpfx Abjzbiq Tsuou -Recording: MK5 -Type/Sizes: see photos -Submission/Price: complete -Transport dimensions: 530/320/H60 mm -Weight: 18.4 kg

Condition: good (used), Technical data for the pallet racking crossbeam: Racking system: Bito Type: PRO Included in the scope of delivery: 01x Pallet racking crossbeam, used Material color: yellow Crossbeam type: PT150M Box profile: 150 x 50 mm Clip: 5 hooks Clear width: 2,700 mm Max. load per crossbeam pair: 4,250 kg, with evenly distributed load 02x Locking pins, used Design: fully galvanized For securing the longitudinal supports Psdszd R I Djpfx Abujgu To prevent unintentional lifting Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: good (used), Duplo Docucutter DC-645 Creaser, cutter The machine is fully operational, ready for production. Pgodez N R U Topfx Abuju Description: The DC-645 has been designed for the growing needs of fast execution of such orders as: business cards, invitations, postcards, leaflets, covers, folders. Docucutter DC-645 cuts lengthwise and crosswise as well as creases, perforates in one pass, ensures continuity of production with minimal operator input. All machine settings can be adjusted automatically – from the settings of the cutting knives, creasing beams to the setting of the creasing depth. When cutting out the work, clippings are created, which, thanks to appropriate control, go directly to the basket located in the lower part of the device’s housing. With the DC-645 device, we will perform such works as: Postcards Cut and creased business cards Flyers Brochures Book covers CD/DVD covers Menu Mailing materials Automatic discharge of clippings into the basket Automatic adjustment of creasing depth paper size: 370×650 mm Min. paper size: 210×210 mm Minimum output format: 48×85 mm Paper weight: 110-350 g/m2 Machine weight: 360kg