Used Prolain Drying Plant for sale (5,400)

Condition: good (used), Year of construction: 2015, functionality: fully functional, Reverse Osmosis Plant for ethylene glycol recovery, with a 12 m³ raw-water storage and homogenisation tank, nominal feed flow rate of 4 m³/h at 4 bar and filter backwash flow rate of 11 m³/h at 1.5 bar. Includes an automatic downflow multimedia filter with anthracite and sand beds supported on gravel, designed to remove suspended particles and protect the membranes. Compact skid-mounted reverse osmosis unit with two-stage filtration using replaceable 20- and 5-micron cartridges, a variable-speed high-pressure pump and a two-stage (1+1) × 6 reverse osmosis membrane configuration. Equipped with 8-inch DOW spiral-wound aromatic polyamide membranes installed in GRP pressure vessels rated up to 1,000 psi. Nominal recovery rate: 90%, equivalent to a theoretical permeate production of approximately 3.6 m³/h under design conditions. Low- and high-pressure piping and interconnections manufactured from AISI 316L stainless steel. Includes recirculation, front and side permeate collection, a CIP chemical cleaning system, membrane flushing, a GRP solution-preparation tank, a 25-micron mesh microfilter and a delivery pump for cleaning solutions and permeate water. Automated control system based on a Siemens S7-200 PLC, providing measurement and control of flow rates, temperature, pressures, pressure drops, operating times, pumping, backwashing, flushing and process alarms. Operator panel with a 6-inch colour touchscreen for parameter display and configuration, start/stop control, filter washing, alarm monitoring and trend graphs. Includes a 2 m³ reverse osmosis reject-water tank for subsequent transfer to the evaporator. Serial No.: MPP51525. Iiedpfxszvddcj Am Doh

Condition: used, Scott AST Air Swept Tubular Dryer Flash Drying of Filter Cakes, Powders and Granules. Model 5418 Dryer complete with feeder, air heater and exhaust fan. 110 kW vee-belt drive Feed Screw with agitated feed hopper. 3.4 MW LPG fired air heater with combustion chamber. Adjustable paddles to control retention time. Large access doors for ease of cleaning. Exhaust fan with 90 kW vee-belt drive. Airflow : 30,000 m3/hour Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Isdpfxezvgiue Am Dsih Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: used, Year of construction: 2014, operating hours: 1,322 h, functionality: fully functional, machine/vehicle number: G3791, power: 550 kW (747.79 HP), total height: 3,700 mm, total length: 12,000 mm, total width: 2,950 mm, overall weight: 5,810 kg, Equipment: documentation/manual, 2G avus 500 plus – Gas-fired combined heat and power (CHP) plant – 550 kW For sale is a 2G gas-fired combined heat and power (CHP) plant, type avus 500 plus, with an electrical output of 550 kW. The plant was built in 2014 and is in used, fully functional condition. On April 19, 2023, a completely new gas engine was installed, and on December 9, 2024, an engine preservation procedure was carried out upon decommissioning of the plant (installation reports are available). The new engine has 1,322 operating hours. Technical data Manufacturer: 2G Energietechnik GmbH Type: avus 500 plus Isdpjzxqd Isfx Am Doih Year of construction: 2014 Serial number: CO0414C-ELLB-550054 Electrical output: 550 kW Power supply: 400 V / 50 Hz Rated current: 794 A Total operating time: 69,481 h Operating hours since last maintenance: 1,322 h Weight: approx. 5,810 kg Dimensions (L × W × H): approx. 12,000 × 2,950 × 3,700 mm Condition and documentation The CHP plant is used and fully functional. Documentation and manuals are available. The chimney shown in the picture can be purchased if required. Location: Neuenkirchen-Vörden, Germany An inspection of the plant is possible after prior appointment. If you are interested or have technical questions, please send us an inquiry. We will provide further information and documents upon request.

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 260 mm, total length: 420 mm, total height: 390 mm, air demand: 1.5 m³/h, overall weight: 17 kg, pressure: 10 bar, warranty duration: 12 months, We offer the Schimmel Mini-S dry ice blasting machine. Blasting media: Dry ice pellets: 1.5mm - 2.2mm Dry ice hopper capacity: 3.5 kg Dry ice consumption: 6-25 kg/h Inlet air pressure: max. 10 bar Inlet air volume: 500 - 1500 l/min Power supply: pneumatic (compressed air only) Iijdpfx Amezxq T Ns Deh Pressure regulation: Yes Air volume regulation: Yes Delivery time: 3-4 weeks Warranty: 1 year Shipping: Not included in the price

Condition: used, Plant for the conditioned milling of malt into grist and for the subsequent storage of the grist. In a conditioning screw conveyor, the malt is moistened with water at 60°C before being ground into grist in the 6-roll mill (Künzel, 1966). The conditioning water is pre-treated in a water treatment system (Täuber, 2019). The grist is collected in a funnel-shaped grist hopper mounted on legs and fed into the grist transport system. Additional title: 6-roll mill for conditioned dry grinding; built between 1966 and 2019 Capacity: 1200 kg/h Iiedpfx Amjziy U De Dsh Features: 6-roll mill; conditioning screw; water treatment

Condition: used, Complete beer clarification system, comprising the following main components: - Diatomaceous earth cartridge filter (Filtrox, 1979) with a capacity of 27.1 hl and a filter area of 26.62 m². Refurbishment work was carried out by Steinecker in 2002. - Cartridge membrane filter (H&K, 2011) with 24 filter cartridges and a filtration capacity of 200 hl/h - Buffer tank for unfiltered wine (Gross, 1979) with a capacity of 61.5 hl - Buffer tank for filtered wine (Gross, 1979) with a capacity of 10 hl - PVPP dosing vessel (1981) - Diatomaceous earth dosing vessel (1979) Additional title: Complete filtration system with buffer tanks and dosing for filter aids Filtration capacity: 18000 l/h Isdpfxozizq Te Am Doih Material: Contact surfaces from stainless steel Features: Cartridge filter; cartridge membrane filter; 2 x buffer tanks; 2 x dosing vessels; various pipes, valves and sensors

Condition: used, CIP system comprising a total of 7 tanks, of which: - 1 tank with a capacity of 60 hl, used as a buffer water tank - 5 tanks, each with a capacity of 30 hl (built in 1992), for acid, buffer water, Desi and 2 x lye - 1 tank with a capacity of 20 hl (built in 1992) for fresh water Other system components: - 2 centrifugal pumps - Heat exchanger - Conductivity measurement - Various pipework and valves Additional title: 7-tank CIP system with pumps and heat exchanger Volume stacked water tank: 6000 l Volume 5 x tanks for cleaning solutions: 3000 l Ijdpfxjzi Anao Am Deih Volume fresh water tank: 2000 l Material: stainless steel Position: vertical vessels each on 3 feet Features: 7 x CIP tanks (comprising 1 x 60 hl, 5 x 30 hl and 1 x 20 hl); 2 x centrifugal pumps; heat exchanger; conductivity measurement; various pipework and valves

Condition: used, Year of construction: 2013, 3D-Venjakob Perfect Air Jet painting line: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm - Max. part length 6.500mm - In U-shape with angle transfer Consisting of: 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash-off dryer OIR, length 6,000mm 5. nozzle dryer VEN DRY AIR JET, length 4,160mm 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes Iedpfjzf N Niox Am Doih 8. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12389, Equipment: documentation/manual, We are offering this used FAT T1 regeneration system, manufactured in 2013. 1. Brief Description For sale is a thermal sand regeneration system from the German manufacturer FAT Förder- und Anlagentechnik GmbH. The system is currently in operation and is being sold solely due to a capacity expansion at the site. The sale is not due to any technical or economic deficiencies. The system has only been operated in a production hall and is in very good technical and visual condition. 2. Technical Data Manufacturer: FAT Förder- und Anlagentechnik GmbH Type: T1 Factory Number: 12389 Year of Manufacture: 2013 Fuel: Natural Gas Thermal Output: 350 kW Regeneration Temperature: approx. 850 °C Throughput: approx. 850 to 1,300 kg/h Sand System: PEP-SET / Cold Resin Systems Volatilization Loss: up to approx. 0.1% Installation: Production Hall Availability: Dismantling from mid-September 2026 3. Scope of Supply The scope of supply includes:  Frequency-controlled sand dosing via screw conveyor  Sieve Ijdpfx Aszhvagom Djih  Magnetic Separator  Thermal Regeneration Furnace  Cooler Sand/Air Cooler (Recuperation) Air/Water Cooler Chilling Unit  Control Cabinet  PLC Control  Electrical Equipment  Pneumatic Components  Original FAT Documentation Not included in the scope of supply:  Dust extraction system, as it is connected to a central extraction system  Sand conveyor after the cooler The system is currently connected to the existing central dust extraction system of the plant. 4. Performance Features The system was designed for the regeneration of chemically bonded molding materials and achieves excellent regeneration results. Special Features:  Volatilization loss up to approx. 0.1%  High regenerant quality  Economical natural gas operation  Robust FAT construction  Proven industrial continuous operation  Complete technical documentation available 5. Documentation Scope The following documents are complete:  Operating Instructions  Maintenance Instructions  Circuit Diagrams  Pneumatic Diagrams  Installation Plans  Layout Drawings  Water Installation Plans  FAT Construction Drawings  Technical Documentation (2 folders) + Switchgear Planning The completeness of the documentation has been verified. 6. System Condition The system is in continuous production operation until dismantling. Advantages for the buyer:  Functional demonstration possible during operation  Inspection possible by appointment  Documented system condition  Weather-protected hall installation  Weather-independent dismantling and loading 7. Dismantling and Availability Dismantling is expected to be possible from mid-September 2026. The system is located inside a production hall and is very easily accessible for dismantling and loading operations. 8. Reason for Sale The system is being sold solely due to a capacity expansion at the production site. The existing system meets all technical requirements and is in functional condition. 9. Inspection Inspections and functional demonstrations are possible by prior appointment. Qualified interested parties will be provided with further technical documents, drawings and photo documentation upon request. If you have any questions or require further information, please send us a message or call us.

Condition: refurbished (used), Year of construction: 2023, operating hours: 5,189 h, functionality: fully functional, power: 390 kW (530.25 HP), year of last overhaul: 2026, Equipment: Basic package Inventhor 9: - MTU diesel engine 6R1300, 390 kW at 1,700 rpm, complies with EUROMOT V emission standard - Auxiliary hydraulic connection 30 l/min and 70 l/min - Roller drive via planetary gear, 380 kW – VARIO – - Load-sensing system - Fuel tank 950 liters - Longitudinal conveyor belt: belt length 4,450 mm, belt width 1,000 mm - Centrally positioned lubrication strips - 24 V electrical control system - Additional electric pump for the operation of the following functions when the engine is off: “raise/lower/fold rear conveyor, open/close comb flap, open/close comb, optionally raise/lower permanent magnet belt, optionally raise/lower folding hopper” - Complete radio remote control - Large side GRP maintenance doors - Maintenance-friendly engine compartment with LED lighting - Hydraulically reversible fan - Loading protection on both sides Isdpfx Ameyu Snue Deih - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint: RAL2011 deep orange Additional equipment: - 500 mm flat chain undercarriage unit - Watering system with hopper extension H=300 mm on both sides - Size "L" shredding system – VARIOMAT (Variomat system L600/4 – 42 teeth) - Rear conveyor length 7 m, width 1200 mm - Size "L" "Limiter" (20 pieces) - LED light package for engine compartment and rear - Central lubrication system with pump Delivery date to be arranged.

Condition: used, Year of construction: 2002, We are offering this used Finnsonic MC-360/III ultrasonic cleaning system, year of manufacture 2002. If you have any questions or require further information, please feel free to send us a message or give us a call. Iodoywua Topfx Am Dsih The dimensions of the individual tanks are approximately: width 750 mm x depth 600 mm x height 600 mm.

Condition: like new (used), Year of construction: 2021, functionality: unexamined, power: 140 kW (190.35 HP), nominal power: 140 kW (190.35 HP), PRICE REDUCTION!!!! Like-new combined heat and power (CHP) units – 2 × WOLF Power Systems – 140 kW electrical each – unused For sale are two like-new CHP units from WOLF Power Systems, each with an electrical output of 140 kW. The units have never been installed or put into operation and are therefore in technically unused condition. Since delivery approximately 5 years ago, they have been stored in a dry and protected environment. Technical specifications: Manufacturer: WOLF Power Systems Electrical output: 140 kW per unit Condition: unused / like new Storage: dry, professionally stored Availability: immediate Iiedpjyt Emnefx Am Deh The current new price is approximately €220,000 net per unit. This represents a very rare opportunity to acquire high-quality CHP technology at a significantly reduced price compared to the new price – ideal for commercial use, district heating projects, agriculture, or energy contracting. Inspection possible by arrangement. Asking price is half the new price; please submit your offer!

Condition: used, Year of construction: 2008, functionality: limited functionality, power: 150 kW (203.94 HP), nominal heat output: 250 kW (339.91 HP), heating capacity: 220 kW (299.12 HP), Fixed-bed wood gasification plant from Urbas. The system is operational. Scope includes engine and generator. The engine requires an overhaul. Also included is a valid EEG feed-in contract at 21.6 cents/kWh until 2028. A comprehensive stock of spare parts, such as side channel blowers, sensors, and pumps, is included. A second unit is provided as a parts donor. Iiodpoyyzv Tjfx Am Djh

Condition: good (used), Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode heat container -Drying oven: with isolation transformer -Type: ES 2 -Technical data: unfortunately no longer legible -Usable space: Ø 100 x 430 mm -Transport dimensions: 520/230/H560 mm Isdpfeyuut Hjx Am Dsih -Weight: 14 kg

Condition: used, Year of construction: 2021, operating hours: 4,856 h, functionality: fully functional, Equipment: Basic package Inventhor 6: - Load-Sensing System - Fuel tank (500 liters) - Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm - Centrally positioned lubrication strips - 24 V electro-control with additional electric pump for operation of the following functions when engine is off: raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper - Complete radio remote control - Large side GFRP (fiberglass reinforced plastic) service doors - Service-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan - Three-sided loading protection - Folding hopper - Fire extinguisher - Service ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint finish: RAL2011 deep orange Additional equipment: Drive System * CAT diesel engine C9.3B, 310 kW at 1,800 rpm, complies with EUROMOT V emission standard * Roller drive via planetary gearbox 310 kW (VARIO) 400 mm Track Chassis Unit - Track chassis with 2 travel speeds - Track width: 400 mm, triple bar - Drive via chassis gearbox with variable motor - Total weight approx. 24,000 kg Shredding system Size "L" complete (Variomat System L 600/4 - 30 teeth) Additional comb bar Size "L" complete, with 14 comb teeth Size "L" limiter (7 pieces), incl. mounting bar and fastening material Additional hydraulic connection 35 l/min to 80 l/min 400 mm flat track chassis Right-hand side door protector panel complete Left-hand side door protector panel complete Three-sided hopper extension H=350 mm Ijdpoywyuiofx Am Doih Rear conveyor 4.9 m, 1,000 mm wide, hydraulically foldable, with anti-magnetic center section Overbelt magnet - Neodymium Frame for overbelt magnet Delivery date upon agreement

Condition: good (used), Year of construction: 1972, functionality: fully functional, This processing plant is designed for the production of creams, ointments, gels, pastes, lotions, suppository compounds, etc., with a usable volume of 100 liters. The total volume with the container closed is 123 liters; the minimum fill volume is 35 liters. The system consists of a fully enclosed stainless steel container with double jacket, which can be electrically or water heated/cooled. The container features a lid with integrated mixing units and drives. The mixing vessel is mounted on three castors and can be wheeled out for filling or cleaning purposes. The lid is mounted on a lifting column for hydraulic raising and lowering, enabling convenient cleaning and emptying. It is fitted with an observation window and two inlets with valves, which can also be used for adding other product components. Additionally, an adjustable mechanism is provided for setting the grinding gap of the colloid mill. Isdpfxsyx Sxce Am Djih Technical specifications: Container: Permissible operating pressure: 1 bar / -1 bar Homogenizer: 1,500/3,000 rpm – 1.8/2.5 kW Anchor agitator: 19/38 rpm – 1.8/2.3 kW Spiral agitator: 29/58 rpm

Condition: used, Year of construction: 2006, operating hours: 71,000 h, functionality: fully functional, MTU 16V 4000 GS L61 gas generator. Year of manufacture: 2006. Operating hours: 71,000. Voltage: 10,000 V. Delivery includes: * genset on skid * gas train control panel * pump unit * documentation and logbook. In fully operational condition. Isdsy At Awopfx Am Dsih

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, input current: 16 A, input frequency: 50 Hz, heating capacity: 87.92 kW (119.54 HP), Drying Tunnel M&R Sprint 2000 (Gas) – 152 cm Belt Width! We offer for sale an industrial screen printing drying tunnel by M&R, model Sprint 2000, type SD2K6012010808, manufactured in 2004, in very good condition. The machine is in continuous operation, fully functional, and ready to work in a professional print shop. Key specifications: - Manufacturer: M&R Printing Equipment (USA) – a global leader in screen printing equipment. Iedpfxjy Evirs Am Deih - Power supply: Gas (Natural Gas / LP Propane) – an economical solution that significantly reduces production costs compared to electric dryers. - Belt width: 152 cm (60 inches) – ideal for handling two automatic presses simultaneously or large formats (bedding, towels, tablecloths, large prints). - Total length: approx. 850 cm. - Heating chamber length: approx. 366 cm. - Belt condition: Teflon belt in very good condition (refurbished, without damage, runs perfectly). - Electrical supply: 380V / 3-phase. Why choose this machine? This unit is a true workhorse. M&R construction ensures precise temperature control and even drying, which is crucial when working with challenging inks (plastisol, water-based). The device is CE certified. Technical condition: The tunnel is well-maintained, and the heating system works properly. No additional investment required – the belt is in working condition, and the gas burners operate flawlessly. Additional information: Due to the size, collection in person is required. The machine is available for viewing and testing in operation by prior appointment. This is an excellent opportunity for a print shop looking to increase its capacity while maintaining low operating costs. Voltage: 380 V Current: 16 A Frequency: 50 Hz Number of phases: 3 Motor Full Load Amps (FLA): A Wiring Diagram No.: S63VCS1 Serial No.: 100457715S Machine No.: 1073 Natural gas operating pressure: 5 inches water column LPG/propane operating pressure: 5 inches water column Natural gas manifold pressure: 3.2 inches water column LPG/propane manifold pressure: 1.3 inches water column Maximum heat input: 300,000 Btu/hr Minimum heat input: 40,000 Btu/hr

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, No reserve price – guaranteed sale to the highest bidder! Further details on the technical specifications and configuration of the system can be found in the attached documentation. TECHNICAL DETAILS Inlet Conditions Design flow rate: 40,000 Nm³/h Temperature: 25 °C Relative humidity: 50% Pollutants V.O.C. inlet concentration: max. 305 mg/Nm³ Average LHV: 7,500 kcal/kg Dust: < 3 mg/Nm³ Discharge Conditions after RC System Volume flow: max. 40,150 Nm³/h Temperature: 30 - 50 °C TOC concentration: max. 20 mgC/Nm³ Filtration Unit Air volume flow: max. 44,000 m³/h Operating temperature: 20 °C Iedpeyz Rf Tjfx Am Djih Rotary Concentrator Number of sectors: 3 Adsorbing active material: Zeolite Process volume flow: max. 41,000 Nm³/h Pollutant inlet concentration: max. 305 mg/Nm³ Process temperature: 20 °C Adsorption air volume flow: max. 38,950 Nm³/h Purge air volume flow: max. 2,050 Nm³/h Desorption air volume flow: max. 2,050 Nm³/h Desorption outlet concentration: max. 5,700 mg/Nm³ Blower BL-01 Air volume flow: max. 4,300 Nm³/h Operating temperature: 60 °C Static pressure: 5,900 Pa Total pressure: 6,290 Pa Power consumption: max. 12.8 kW Installed power: 18.5 kW Sound pressure level at 1.5 m distance: max. 89 dB(A) Blower BL-101 Air volume flow: max. 36,700 Nm³/h Operating temperature: 35 °C Static pressure: 2,400 Pa Total pressure: 2,620 Pa Power consumption: max. 38.4 kW Installed power: 55 kW Sound pressure level at 1.5 m distance: max. 84 dB(A) Blower BL-02 Air volume flow: max. 135 Nm³/h Operating temperature: 30 °C Static pressure: 5,000 Pa Total pressure: 5,050 Pa Power consumption: max. 0.4 kW Installed power: 2.2 kW Sound pressure level at 1.5 m distance: max. 70 dB(A) EQUIPMENT Documentation/manual included Note: The system has already been dismantled.

Year of construction: 2017, condition: refurbished (used), functionality: fully functional, Beton2Go self-service system – MA15-2 concrete mixing plant – extensively refurbished and ready for immediate use. We are selling our Beton2Go system due to the purchase of a new one. Technically in very good condition and extensively overhauled. Ideal for a quick start or expansion. Technical data: Year of manufacture: 2017 Capacity: approx. 15 m³/h 0.5 m³ per batch Cement silo with level measurement (online compatible) Operation with retarder possible Self-service with cards (EC format) Refurbishment: Mixing plant: • HMI touch screen renewed • Relays partially new • Wiring new (CEE, industrial plug, network) • Emergency stop and safety switches new • Sensors + mixer flap bearings new • Closure for mixer cover new • Hardox plates: 4/8 renewed (bottom), top in good condition • Belt rollers inspected/repaired • De-rusted, partially sandblasted and painted • Mixer arms repaired, mixer shoes new Isdpfxszlpv As Am Djih • Gear oil changed, lubricated • Dust seals + various small parts new Conveyor belt: • Rollers partially new • V-belts new • Gear oil new • De-rusted and painted • Hopper seals new Cement silo: • Wiring new • Filter cleaned • Industrial plug retrofitted • Cleaned externally UVV and DGUV V3 inspection and certification performed before handover. Ready for immediate use, no backlog of investments. Scope of delivery: Mixing plant, conveyor belt, 2x IBC (water + admixture), 2x pumps, spare parts, inspection booklet Requirements: 64A power supply, optional network (VNC remote maintenance) Inspection possible. Transport can be arranged. Price net plus VAT.

Condition: new, Year of construction: 2023, functionality: fully functional, feed rate X-axis: 6 m/min, working width: 1,300 mm, total length: 4,885 mm, total height: 2,400 mm, total width: 3,780 mm, type of input current: three-phase, working height: 900 mm, input voltage: 380 V, input frequency: 50 Hz, energy consumption: 17 kWh, warranty duration: 12 months, DIMENSIONS OF PAINTED COMPONENTS The line will ensure good qualitative results under all operating conditions, provided that components with incorrect parameters are eliminated at the beginning, such as: • Bent, warped components; • Components with defects that would render them unsuitable for use even after painting. • Maximum length 2500 mm • Minimum length 350 mm • Maximum width 1300 mm • Minimum width 50 mm • Maximum thickness 60 mm • Minimum thickness 5 mm • Maximum deflection 10 mm • Average temperature 15-35 °C • Minimum temperature -5 °C • Relative humidity % • Operating speed 2 [2-3] m/min • Operating height 900 mm MATERIAL • Wood and wood-based materials END PRODUCT • Furniture • Outdoor furniture Ijdpfx Amjzq Axzo Dsih SHAPE • Shaped components TYPES OF PAINTS • Solvent-based paints • Water-based paints FINISH • Transparent • Matte (< 25) • Pigmented • Semi-matte (30-40) MITO B2: MITO B2 SPRAYING AUTOMAT Spraying automat with 2 arms, dry air filtration system, and conveyor belt. Machine designed for continuous coating of various types of profiled panels. Spraying in continuous mode on any type of panel. No paint mist on the underside of the panels thanks to the 1650 mm conveyor belt. Robust machine construction. Excellent access to the interior through glazed areas, access doors, and retractable parts. Components are transported by a CFB belt transport system with a sealed edge, driven by a motor with a frequency inverter. The outer side of the belt is located outside the cabin to allow vapor containment. The axis is driven by a brushless motor and a toothed belt, ball bearings. Guarantees the best feed, acceleration and deceleration parameters, allowing for maximum coating quality. New and patented PLENUM (patented air diffusion system). Thanks to flow studies, better paint management (savings), better machine cleaning, and better coating quality are achieved. Unique management of component transport with precise speed control prevents soiling of the lower part of the components during acceleration/deceleration. Control electrical cabinet, located at the machine entrance on the service side, with electrical installation and connection channel to the machine. Wide, robust and efficient double-zone with a filter section. Flow regulated by a frequency inverter. Tanks with supports for Columbus filters Fire-resistant ATEX cat. 2G exhaust fan HCD type belt cleaning and paint recovery system. Perfect belt cleaning, maximum paint recovery ensured by the patented system from Cefla and the CFB belt with sealed edges. Cleaning system motor with inverter 1.50 kW. Easy access system, components removable from the front, ergonomic layout. Color and product change in seconds (including a spare set). 2 opposite arms with fixed holders for 4 guns, manual height adjustment. Spraying equipment (pumps, guns) and adaptations are not included in the offer. 2 paint feed circuits with element recirculation and paint filters. Stainless steel fittings.

Year of construction: 2021, operating hours: 5,297 h, condition: used, functionality: fully functional, machine/vehicle number: 200/751/15-21/6HE-35-40P/450, Complete drying system, consisting of 1 Harter Airgenex 20,000 dehumidification module and 2 TS 1800-5 drying chambers, each with 5 pull-out drawers with vacuum extractors, insulated air ducts, and an additional circulating air fan. Isdpozmw Hlefx Am Djih The system is designed for drying XPS panels coated with mortar and glass fiber mesh without warping. Year of manufacture: 2021. The drying chambers are very robustly manufactured by Sondermaschinenbau Bannik. The system is also sold as individual components; an inspection is possible. The refrigerant has been evacuated and is stored separately in a steel cylinder (20 kg). Price negotiable.

Year of construction: 2023, operating hours: 500 h, condition: like new (used), number of feeding trays: 2, Scope of supply of the system Iiodpfozmyvijx Am Deh The offer includes: 1. Mixer • Concrete mixer with a capacity of 9 m³. • Mixer screw inside the mixer has been renewed and reinforced. • The mixer is driven by a powerful electric motor. • The mixer is mounted on four load cells (each with a load capacity of 20 t) for precise weighing of the materials to be mixed. 2. Trough screw conveyor 1 • Conveying system for feeding the mixer. 3. Trough screw conveyor 2 • Conveying system for discharging the finished mixed material. 4. Liquid feed • Dosing of liquid components via a pumping system from Flux. 5. Electronic control • Electronic control with a mobile operating unit for weighing and dosing based on the weight increase of the material in the mixer. Mode of operation • The mixer is installed on load cells. The current material weight is displayed on the display at all times. • For example, if a total mixture of 4,500 kg is to be produced, this can be dosed precisely according to a predefined mixing ratio, e.g. 80% main material (3,600 kg), 10% additive (450 kg), 7% additive (315 kg) and 3% additive (135 kg). • The smaller additives are pre-weighed and fed into trough screw conveyor 1 via the additive hopper using a travelling carriage from big bags. • Subsequently, the main material is conveyed into the mixer via trough screw conveyor 1 until the desired total weight of 4,500 kg is reached. • After that, the feed is stopped via the trough screw conveyor. • The mixing process then takes place according to the requirements. In our application, the mixing time was approximately 20 minutes. • After the mixing process is complete, the material is discharged via trough screw conveyor 2. To do this, the direction of rotation of the drive motor is switched at the control panel and the discharge screw conveyor is switched on. • The finished mixture can then be filled directly into containers or loaded into transport vehicles (in our case, a push-off trailer or manure spreader). Mixing process based on weight percentages 1. The main material is fed into the trough screw conveyor via the large stainless steel hopper, which then conveys the material into the mixer. In our case, this consisted of solid components from biogas waste. 2. Additional components can be added directly from big bags onto the main material using a second stainless steel hopper and a traverse. This ensures pre-mixing during the conveying process. In our application, biochar and bentonite were added. 3. Liquid components are sprayed directly into the mixer. In our case, we used EMa (activated effective microorganisms) for this purpose. Optionally, the push-off trailer/manure spreader can be purchased.

Condition: used, Refrigerant Condenser, Liquid Cooler, Güntner Cooler, V-block Cooler, Industrial Radiator, Used Machine Manufacturer: Güntner Model / Type: GFD 080.1D/2x4-MS1D/4P.E Overall dimensions: 5404 x 2400 x 2850 mm Coolant: Ethylene glycol 35 Vol. % Weight: 2694 kg Cooling capacity: 331.7 kW Isdpjzkynysfx Am Doih Number of fans: 8 pcs Fan diameter: 800 mm

Condition: new, functionality: fully functional, Year of construction: 2025, The ASCO® VS COMPACT vibrating screen offers a robust and powerful platform for a wide range of screening tasks. Featuring two vibrating motors, it is particularly practical for recycling companies and businesses in the construction, agricultural, and gardening sectors, where many different materials must be processed within tight time frames. Technical specifications: - System capacity: 18-23 t/h - Maximum bucket width: 1.6 m - Screening area: 1.5 m² - Drive power: 230 V / 2 x 0.35 kW Isdpewhkuuofx Am Deih - Weight: 557 kg - Width: 1.88 m - Length: 1.31 m - Height: 2 m - Loading height: 1.63 m Options: - Poles - Hopper - Support feet