Used Ruf Other for sale (21,108)

Condition: new, Excavator class: 14.0 - 20.0 ton Weight: 1357 kg Beat rate: 350 - 650 bpm Kdedpfx Aqolqakreqor Working pressure: 150 - 170 kg/cm Oil volume flow: 90 - 120 l/min Chisel diameter: 125 mm All models are supplied with a chisel, hose set and tool box.

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Kdedpozp H R Eefx Aqqjr Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Year of construction: 2022, condition: ready for operation (used), controller manufacturer: SIEMENS, table load: 3,000 kg, Automated sheet metal storage system manufactured in 2022. This TRUMPF Automated Sheet Metal Production System features a storage height of 7,900 mm and a maximum load per storage location of 3,000 kg. It includes 266 storage locations and supports sheet formats of 3,050 x 1,525 mm. If you are looking to get high-quality automated storage capabilities, consider the TRUMPF Automated Sheet Metal Production System we have for sale. Contact us for further details. • Storage system: STOPA Compact II • Type: Automated sheet metal storage system with chaotic storage management • Storage height: 7,900 mm • Sheet format: 3,050 x 1,525 mm • Maximum load per storage location: 3,000 kg • Number of storage locations: 266 • Total storage capacity: 798 t • Configuration: 8 sections/towers, up to 37 storage levels per section • Pallet format: GF 3050 x 1525 x 90 mm • Pallet types: SPO, SPMgl • Loading heights: 185 / 275 / 460 mm • Functions: Automatic material storage and retrieval; automatic material supply to connected production cells; storage interface for integrated production machines • Storage control • Server operating system: Windows Server 2022 • Central storage management and automated material flow management • Integration with TRUMPF production equipment • Connected production cells • TRUMPF TruLaser 5030 fiber (L76) • Machine type: CNC 2D fiber laser cutting machine • Working area: 3,000 x 1,500 mm • Laser source: TruDisk 6001, 6,000 W • CNC control: Siemens SINUMERIK 840D sl Kdsdpfx Aezu Sugoqqer • TRUMPF TruMatic 6000 fiber • Machine type: Combined CNC punching and fiber laser cutting machine • Working area: 3,050 x 1,550 mm • Laser source: TruDisk 3001, 3,000 W • Maximum punching force: 180 kN • Linear tool magazine: 25 positions • TRUMPF TruBend Center 7030 (B34) – Cell 1 • Machine type: Automatic panel bending center • Max bending length: 3,123 mm • Max thickness: structural steel 3.0 mm; stainless steel 2.2 mm; aluminum 4.0 mm • Max box height: 220 mm • TRUMPF TruBend Center 7030 (B34) – Cell 2 • Same specifications as Cell 1 • System functionality (summary) • Central automated storage and retrieval of raw sheet material • Automatic supply of material to connected laser, punch-laser, and panel bending cells • Automatic transfer between storage and production stations • Centralized, high-capacity sheet handling • Main system configuration • 1 x STOPA Compact II automated sheet storage system • 1 x TRUMPF TruLaser 5030 fiber 2D laser cutting cell • 1 x TRUMPF TruMatic 6000 fiber punching and laser cutting cell • 2 x TRUMPF TruBend Center 7030 automatic panel bending cells Additional equipment • For TRUMPF TruLaser 5030 fiber (L76) • Automatic pallet changer • LiftMaster Compact 1530 (automatic loading and unloading) • STOPA storage connection/interface • For TRUMPF TruMatic 6000 fiber • SheetMaster 3000 x 1500 mm (automatic sheet handling) • GripMaster 3000 x 1500 mm • Storage system integration/interface • For TRUMPF TruBend Center 7030 (both cells) • 2-axis part manipulator • 5-axis rear stop • Rotary manipulator • ToolMaster Bend • Automatic loading and unloading • Storage interface • System-wide • Central storage management server (Windows Server 2022)

Year of construction: 2000, condition: used, Empty weight: 20.200 kg Dimensions (LxBxH): 550 x 290 x 310 cm Serial number: k 3833 Max. Pressing Force: 2250 kN Max. Working Length: 4500 mm Max. Working Pressure: 300 bar Max. Stroke: 235 mm Ksdpfszu Nfpsx Aqqjdr Control system: Advantech Net weight: 20,200 kg Dimensions LxWxH: 5,500 x 2,900 x 3,100 mm Online auction of metalworking and sheet metal processing machines (including a wide selection of SIEGMUND welding and clamping tables and related tools, SAFAN press brakes and SAFAN guillotine shears, MOSMAN YLS-3000 3kW laser welding machine, various FRONIUS, REHM, etc. welding machines, BOMAR, URSUS, ELHA, etc.), remaining stock of sheet metal, materials and inventory, rolling stock, technical equipment, and modern office furniture, released following the recent bankruptcy of Solex Thermal Science (Netherlands) B.V., formerly Mosman Stainless Steel in Haaksbergen, the Netherlands. The online auction opens Thursday 16 July and closes Thursday 3 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 1 September Pickup days are on: - Thursday 10 September - Friday 11 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Year of construction: 2005, condition: used, Serial number: MMFE 1015393 Rebuilt: 2021 by Muller Martini-8000 speed Manual feed station Number of stations: 12 Collating machine: ASAC auto set up Type: 3693/ 24” Self-adjusting caliper control Ksdjzuw Hnepfx Aqqsdr Signature recognition system: ASIR Binding machine type: 3028 Number of binding machine clamps: 31 Touchscreen controller Milling station 2 separate roughing stations Hot-melt spine gluer with freestanding preheater Hot-melt side gluer with freestanding preheater PUR gluing system with preheater 2 Nipping stations Conveyor belt system to link Müller Martini Merit S three-knife trimmer with spare knives Overall dimensions of the setup: approximately 7,000/11,000 x 32,000 x 2,500 mm Notes: Must be professionally disassembled and loaded by the buyer Online auction of high-quality printing, finishing, bookbinding, and paper-processing machinery from a modern graphic arts production environment, including a HEIDELBERG Varimatrix 105 CS automatic die-cutting and embossing machine, a HEIDELBERG Speedmaster SM 52-5 Anicolor 5-color offset press, a BOBST BRAUSSE Bora 1050 E die-cutting machine with stripping function, 2 HEIDELBERG Stitchmaster ST450 professional brochure production lines, a HORIZON StitchLiner 6000 fully automatic saddle-stitching line, HEIDELBERG Stahl TH 66 / TH 82 and XT 94 folding machines, a MÜLLER MARTINI Bolero automated high-speed line for collating and perfect binding with PUR and hot melt, POLAR 137 XT PACE and POLAR 137 XT AT XT Plus Autotrim fully automatic cutting lines, POLAR 115 XT and 92 ED cutting machines, AGFA Avalon CTP plate setters, MÜLLER MARTINI 1571 automated collator, PALAMIDES Delta 703 bundling and strapping machines, NEOPOST DS600i inserter, the EPSON Super Color T5200 large-format printer, the TECNOMAC Evolution 76 B1 laminator, the HEIDELBERG GTO 52 with Alcolor, various HEIDELBERG sheetfed presses, stack lifts, accessories, and graphic peripherals, etc. The online auction opens Friday 14 August and closes Thursday 17 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing days are on: - Thursday 3 September - Thursday 10 September - Monday 14 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Colour: Grey Empty weight: 1.000 kg - Details: - └ Description: blades for a planer - Documentation available: No - CE certificate present: No - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT Kdedpfx Aqjzmupdeqer VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1985, operating hours: 4,000 h, Air compressor – the unit is fully functional and ready for use. Kdodpfxoxbwlks Aqqor

Year of construction: 2008, condition: used, functionality: fully functional, Blažek ABM-5 D stick packaging line for sale – 3 machines available For sale are three fully functional Blažek ABM-5 D stick packaging lines, including downstream collection stations. These systems were specifically developed for the precise filling of fine-grained sugar and feature volumetric dosing for granules and crystalline raw materials. Thanks to their robust design and reliable technology, the machines are also suitable for numerous other free-flowing products with comparable properties. Technical specifications: Manufacturer: Blažek Type: ABM-5 D Dosing system: Volumetric dosing Suitable for: Fine-grained sugar Granules Crystalline raw materials Current configuration: 5 sticks per cycle Includes downstream collection station Machines are fully functional Available systems: Year of manufacture 2008 Year of manufacture 2008 Year of manufacture 2016 Kdjdpfx Ajzvww Njqqer Condition All systems are in functional condition. A demonstration in test operation on-site is possible by arrangement, so that interested parties can be convinced of the function and performance of the machine. Inspection An inspection of the systems is possible by appointment. We will gladly provide further technical information, pictures, or a test run video. If you are interested, we look forward to hearing from you.

Condition: new, Year of construction: 2018, functionality: fully functional, Schneider Electric Masterpact NW32HF 3200 A four-pole drawout switch-disconnector, supplied with its matching withdrawable cradle/chassis. Heavy-duty low-voltage switching device suitable for use as a main incomer, bus-coupler or isolating switch in industrial distribution boards, generator systems, data centres and other high-current electrical installations. This is a switch-disconnector, not a circuit breaker with an electronic protection trip unit. The photographed configuration corresponds to the Schneider Masterpact NW32HF 4-pole, 3200 A drawout version. Technical details Manufacturer: Schneider Electric Series: Masterpact NW Kedpfx Aezlivpjqqodr Model: NW32HF Schneider reference: 48321 Equipment type: Switch-disconnector / isolator Rated current: 3200 A Number of poles: 4 Version: Drawout / withdrawable Rated operational voltage: 690 V AC Frequency: 50/60 Hz Rated insulation voltage, Ui: 1000 V Rated impulse withstand voltage, Uimp: 12 kV Rated short-time withstand current, Icw: 85 kA / 1 second Rated short-circuit making capacity, Icm: 187 kA peak Utilisation category: AC-23A Standard: IEC 60947-3 Manual Push ON / Push OFF operating mechanism Rear high-current terminal connections Withdrawable cradle/chassis included Schneider identifies reference 48321 as a 3200 A, 690 V, four-pole drawout Masterpact NW32HF switch-disconnector

Condition: used, mileage: 238,300 km, power: 368 kW (500.34 HP), first registration: 02/2012, overall weight: 40,000 kg, fuel type: diesel, color: orange, axle configuration: > 3 axles, gearing type: automatic, emission class: euro5, total length: 9,400 mm, total width: 2,500 mm, Equipment: ABS, air conditioning, * Iveco Trakker AD 410 T 50 P mit Wechselsystem * Radstand ca . 4,80 m Ksdpfx Aqszu Dtnsqodr * Euro 5 * Automatik Getriebe * Federung: Blatt/Blatt/Luft/Luft * Sonnenblende * Rundumlicht * Anbauplatte vorne + hydr. SW * Zusatzbeleuchtung * AHK + DL- Anschlüsse + Duomatik * beheizte Frontscheibe * Anbauplatte für Seitenpflug + hydr. SW * Ad- Blue * Schlegel Winterdienstausstattung * Bedienpult für vorne und seitlich * Auspuff hochgezogen * Differnzialsperren * Rückfahrcamera * el. FH * Mutifunktionslenkrad * Küpper Weisser Combi Wet Salzstreuer * IMSSF E23060 HFU * Bj. 2012 * Bedienpult * Reifen 385/65R22,5 ca. 40% * 385/65R22,5 ca. 40% * 315/80R22,5 ca. 70% * 315/70R22,5 ca. 70% * gegen Aufpreis mit Meiller Kippaufbau + Abstützung + Wechselsystem * ca. 5,6m L x 0,5m H x 2,43m B * deutsches Behördenfahrzeug * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, * Verkauf nur an Gewerbe, Transport zum Hafen möglich, * Dieses Angebot ist unverbindlich und freibleibend. * Irrtum und Zwischenverkauf vorbehalten. Keine Gewähr auf Eingabefehler. * Besichtigungen nur nach Vereinbarung, * WhatsApp

Condition: used, Year of construction: 2020, * Streumaster SW16 TC * Year of manufacture: 2020 * 16 m³ * Unladen weight: 19,000 kg * 40 km/h * Camera * Weighing system Kodpfjzuh T Sex Aqqsdr

Condition: used, Year of construction: 1987, functionality: fully functional, shaft length under head: 160 mm, thread length: 85 mm, total width: 2,800 mm, total length: 7,800 mm, bar diameter (max.): 16 mm, Machine is complete bolt making machine with pointing and threading. Ksdpfxeztrpnj Aqqodr

Year of construction: 2010, condition: used, New: No Kjdpfx Aqezvnt Uoqsdr Please contact us for more information.

Year of construction: 2014, condition: ready for operation (used), Quality scanner manufactured in 2014. This MICROTEC GOLDENEYE GLD 600 DSC is designed for the inspection of large boards and panels up to 1.8 meters in width. It integrates geometric, visual, and X-ray multi-sensor cameras to assess both external and internal properties of lumber, providing a comprehensive evaluation of material quality. If you are looking to get high-quality inspection capabilities, consider the MICROTEC GOLDENEYE GLD 600 DSC machine we have for sale. Contact us for further details. • Max board/panel width: up to 1.8 m • Inspection capabilities: geometric, visual, and X-ray sensors to assess external and internal material properties for comprehensive quality evaluation • Application: Inspection of large wood boards and panels • Units available: 2 Ksdpfx Aezvvb Tsqqedr

Condition: used, Year of construction: 2006, * Doppstadt DW 2560 E-1 electric shredder / wood chipper Kdedpfx Aoyw Exaoqqsr * Year of manufacture: 2006 * ??Complete repair invoice available?? * Incl. control cabinet * Incl. supports * Weight: 25,000 kg * More pictures and videos via Whatsapp * All information subject to change and prior sale reserved.

Condition: like new (used), functionality: fully functional, Brand: Schäfer Maschinenfabrik GmbH Type: 1102 RTP Kdsdjzvx Ehopfx Aqqsr Year of manufacture: 2023 Fork length: 1150 mm Overall dimensions (L): 2300 mm Overall dimensions (W): 850 mm Overall dimensions (H): 650 mm Load capacity: 2 t

Condition: used, Hosokawa Alpine Turboplex Classifier for ultrafine classification of dry powders. Model 500 ATP-NG (New Generation). Classifier wheel designed for reduced pressure drop and hence power consumption. Kodpezvgl Aefx Aqqjdr Classifier manufactured in 2002 for project in Turkey. In storage for the last 8 years. Installed power - 22 kW. Airflow - 7500 m3/hour. Fineness range - 97% passing 120 - 8 micron. Can be used for separation of powders or for operation in closed circuit with a mill. Feeding introduced either by gravity from above or in airstream from below. Scope of supply includes 55 kW exhaust fan to generate airflow through classifier system. PPDS can supply ancillary equipment and controls to complete system if required. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can provide a full refurbishment service. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Three machines available, each with an exhaust fan. Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: used, Scott AST Air Swept Tubular Dryer Kedszvgiujpfx Aqqsdr Flash Drying of Filter Cakes, Powders and Granules. Model 5418 Dryer complete with feeder, air heater and exhaust fan. 110 kW vee-belt drive Feed Screw with agitated feed hopper. 3.4 MW LPG fired air heater with combustion chamber. Adjustable paddles to control retention time. Large access doors for ease of cleaning. Exhaust fan with 90 kW vee-belt drive. Airflow : 30,000 m3/hour Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: used, Model DC850 SS Winkworth Double Cone Mixer Machine No. 5016 For gentle (low shear) blending of dry powders and granules. Stainless steel construction with polished internals. Conical shape ensures complete discharge of mixer. Total Volume - 1385 litre Max Working Volume - 850 litre Driven through gear and pinion by 7.5 kW motor with David Brown Radicon gearbox. Control Panel Approximate overall dimensions of mixer on support frame - 2300 mm long x 1750 mm wide x 2400 mm high. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Kodjzvgm Tspfx Aqqodr Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: used, operating hours: 1,655 h, Errors and prior sale excepted! Internal number: 1433. PERKINS engine. The vehicle is in original condition! Nationwide delivery is possible for an extra charge. Errors and prior sale excepted. We will gladly accept your vehicle as a trade-in. Kdsdpfozp Avksx Aqqer Financing/leasing is also possible without a down payment! Do you have any further questions? We will be happy to advise you!

Condition: used, Year of construction: 2010, machine/vehicle number: Howard 1900 PLE, functionality: fully functional, operating hours: 40 h, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, total length: 5,000 mm, total width: 2,000 mm, total height: 1,800 mm, overall weight: 960 kg, Equipment: CE marking, Used hose press from production conversion. The system was used for pressing or dewatering plant-based materials. On-site inspection and functional video are available upon request. • Suitable for dealers and processors in the fruit, juice, cider, or plant processing sector. Ksdpfxszuzfns Aqqsdr • Stainless steel trays are included in the scope of delivery. • Sale due to system or process change.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total width: 2,450 mm, total height: 400 mm, total length: 4,000 mm, conveying length: 4,000 mm, construction width: 2,550 mm, We had this roller conveyor on our Solarco Boxmaker 25 DDC-DD. For the most part, we didn't use this conveyor. Kodpfx Aoy Tixvjqqsdr It transported pallets cleanly. If you are interested, please contact me.

Year of construction: 1979, condition: good (used), Flat grinding machine make Brand Type: Compact 600/800 with Heidenhain control We do not have any further technical data. Kodpszvfpysfx Aqqodr

Condition: used, 10’-0” x 84” HARDINGE CONICAL BALL MILLS MILL SPECIFICATION Model : 10’-0” x 84” HCBM Overall Dimensions : 3050 mm diameter x 5185 mm long. Installed Power : 400 kW Absorbed Power : 320 kW Mill Speed : 20 rpm Lining : Chrome Iron Cast Liner Plates Media : Steel Balls (30 tonne required) Drive : Girth Gear and Pinion, Gearbox and Slip Ring Motor Trunnion Bearings : No.1 Mill - Cooper Split Roller Bearings No.2 Mill – White Metal Bearings Ksdozvgdlepfx Aqqjdr The mills were operated by British Chrome & Chemicals Ltd (later Elementis Chromium), at their site in Cleveland, UK, processing Chrome Ore to a fineness of 99% passing 45 µm. The first mill, with the white metal bearings, was installed in around 1970. The second mill, with the Cooper Split Roller Bearings was installed in 1980. This mill is offered with a new set of Cooper Trunnion Bearings. Both mills were in operation until the site closed in 2009 and have been in storage ever since. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: like new (used), The Acrivarn spray glazing machine features a variable speed conveyor which passes the trays or products to be coated underneath the atomising hood. Two spinning discs are used to guarantee an even glaze coverage and to disperse the coating liquid at a controlled rate. Excess glaze is filtered and returned to the reservoir within the machine to minimize wastage. Kdedsxu N Iwepfx Aqqor