Used Squared Schütz for sale (1,676)

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm vice 285 mm turning speed range: 36/72 m/min Nodpfx Asfg E H Sonfola dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 485 kg dimensions of the machine ca. 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor switches off – Saw head rises – Vise opens. Semi-automatic dynamic system (manual lowering of the saw band bow up to to the desired position and cycle start via the manual button.) Some features: New centralized control console on an articulated arm to allow the operator can be easily switched from any working position. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Large work surface with turntable on roller bearings, measuring 265 mm preloaded thrust bearing, mounted. Double belt speed (36/72 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base frame with pull-out coolant tray. Electric coolant pump for cooling and lubricating the saw band. Preparation for installing the minimum blade lubrication kit (Optional), in addition to the conventional standard lubrication Emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: used, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: round 120 mm capacity 45 degrees: square 100 mm capacity 45 degrees: square 135 x 60 mm saw blade turning speeds 1700 / 3400 U/min total power requirement 1,5/2,2 kW weight of the machine ca. 0,210 t dimensions 0,9 x 1,4 x 1,4 m Manual circular saw machine for sawing aluminum, miter cuts 45° right to 45° left and saw head can be swiveled 0° to 45° to the left. At the Cobra 352 MA (automatic vice) the vices close automatically when the saw head is lowered. •Roller-bearing rotary table for quick and precise miter adjustment •Screw lock to lock the saw head in any angle position •Automatic saw blade lubrication •Clamping system consisting of two vices Nedpfxefc T Ufe Anfela •Saw head locking in the upper position •Adjustable length stop for cuts of the same length •Vice opening 180 mm

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3320 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Some features: New centralized switch console on an articulated arm. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Turntable (on roller bearings of 420 mm with preloaded thrust bearings assembled). Double belt speed (40/80 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Nljdpfofg E H Uox Anfea Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base designed to completely contain the coolant, even with maximum angle cuts. The coolant pan (provided with an electric pump for lubrication and Cooling of the saw band) and the chip drawer (can be replaced by a Chip conveyor to be replaced - see special accessories) are in the base frame built-in. Preparation for installing the minimum blade lubrication kit (Optional, in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Adjustable length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 100 mm capacity 90 degrees: flat 130 x 80 mm capacity 45 degrees: round 100 mm capacity 45 degrees: square 85 mm capacity 60 degrees: flat 90 x 80 mm clamping range 130 mm turning speeds 30 / 60 U/min dimensions of saw-blade 350 x 32 x 2,5 mm total power requirement 1,1 / 2,2 kW weight of the machine ca. 0,22 t dimensions of the machine ca. 1200 x 860 x 900 m Aktionspreis 2026 Inkl. base frame !!! Manual miter saw for miter cuts from 45° left to 45° right. Steel worm wheel with double ball bearings Saw blade shaft mounted on eccentric made of spheroidal cast iron Bronze wheel with wedge and conical coupling to ensure maximum power transmission to the steel worm wheel Vice with adjustable guide bars Adjustable anti-cutting burr device (enables burr-free cutting) Length stop Double return springs Nodsfmck Hjpfx Anfjla Safety main switch Emergency stop button Speed switch Electric coolant pump for lubrication and cooling of the saw blade (attachment a micro spray device possible) Motor 1.5/1.8 kW - 400 volts

Condition: new, cutting diameter 280 mm capacity 90 degrees: flat 380 x 260 mm capacity 90 degrees: square 260 x 260 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3440 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic, semi-automatic band saw with additional manual and semi-automatic-dynamic function, for cuts from 45° right to 60° left. Nsdpfx Aofg E Iaenfjla Some features: Pivoting control panel on vertical post. 420 mm large rotary table on roller bearings with preloaded thrust bearing and replaceable steel inserts. Double belt speed (40/80 m/min.)

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm turning speed range: 36 / 72 m/min dimensions of saw-band 2950 x 25,4 x 0,9 mm weight of the machine ca. 0,4 t Dimensions (LxWxH) 1,5 x 0,9 x 1,5 Nljdpfjfg E H Rox Anfsa Semi-automatic function: Vice closes and motor starts, saw head lowers for the cut, motor switches off, saw head rises, Vise opens. Some features: New centralized switch console on an articulated arm. Latest generation hydraulic control unit, highly powerful and with low energy consumption. Base frame with pull-out coolant container. The machine complies in all areas CE regulations!

Condition: excellent (used), functionality: fully functional, All listed Eppinger items are suitable for Okuma LT200-M and LT10-M, among others. All items are available in larger quantities. Condition: very good • Boring bar holder 7.030.180 angled, left-right, cylindrical seat Ø32, external and central coolant supply. Manufacturer: Eppinger • M angle heads 90° 3.200.653, right-angle drilling & milling head, collet chuck ER25A, external coolant supply. Manufacturer: Eppinger • M tool holder straight 180° 3.200.409, straight short drilling & milling head, collet chuck ER25, external coolant supply. Manufacturer: Eppinger • External holder 7.030.177, angled tool holder left-right multiple, square mount, external coolant supply. Manufacturer: Eppinger • M angle holder 90° with fine swivel adjustment 2x90° / 2x30°, 3.200.295, angle adjustable, straight drilling & milling head, collet chuck ER20A, external coolant supply. Manufacturer: Eppinger • External holder, straight multiple tool holder, 7.030.176, square mount, external coolant supply. Nlsdpjy Hkk Hefx Anfsa Manufacturer: Eppinger • Parting holder, universal rotation direction, parting holder, universal rotation direction, external and central coolant supply. Manufacturer: Eppinger

Condition: like new (used), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, We would be happy to advise you! Here we offer from our own inventory: 10x Filter Fan Unit (FFU) controllers together with digital control units. New price: €1,000 each. We also offer a cleanroom setup according to your requirements. See pictures for an example. The room elements are each 2.05 meters x 3.2 meters. The pictures are of a room we built for a Dutch customer. New cleanrooms have a guide price of €500 per square meter of floor space with a height of 2,500 mm and glazing. Example: 4x4 meters 4x4 = 16 * €500 = €8,000 Nljdpferlm Rvox Anfsa

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, Image processing system consisting of 5 million pixel B/W camera ( model number CA-H500M) and image processing controller (model number XG-X1500). The set includes cables and a white backlight (model number CA-DSW30). Type: Camera*1 Image pickup element:2/3" B/W CCD image receiving element, 11x high-speed square pixel capture, 5,050,000 pixel Cell size 3, 45 x 3, 45 µm Valid pixel count:4,990,000 pixels 2432 (H) x 2050 (V) Pixel transmission speed: 130 MHz (65 MHz x 2 channels) Scanning system: Full frame (61.2 ms), interlaced (40.3 ms) Transmission system: Digital serial transmission Nlodpfxjmza Ile Anfja Electronic shutter: 1/15, 1/30, 1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/20000, 0.05 ms to 9000 ms can be set with numerical values. Lens mount: C screw mount

Year of construction: 2022, condition: like new (used), Fiber laser machine for pipes YLT 6020 - AVAILABLE IMMEDIATELY high quality equipment Laser power: 3kW for pipes and profiles 6200mm length × 20-200mm diameter round 6200mm length × 20mm-140mm square automatic loading 3000-6200 automatic unloading 0-4000mm Equipped with: Precitec Auto Focus cutting head IPG resonator with 3kW incl. German !!! On-site guarantee THX tours Siemens control CE safety overTÜV Süd is included: warranty CAD CAM software Installation Delivery within EU Training offered We have been looking after YAWEI machines for the European market for more than 15 years. We are your service partner for all questions. You can test an identical machine under power at any time. Come and visit us! Nljdpfx Aoht U D Djnfsa

Condition: new, functionality: fully functional, Year of construction: 2025, Fiber laser machine for pipes YLT 8025 - AVAILABLE IMMEDIATELY high quality equipment Laser power: 4kW for pipes and profiles 8200mm length × 15-250mm diameter round 8200mm length × 15mm-200mm square automatic loading 3000-8200 automatic unloading 0-6000mm Nlsdpfx Ajywub Renfea Equipped with: Auto Focus cutting head MAX resonator with 4kW incl. guarantee THX tours Siemens control CE safety is included: warranty CAD CAM software Installation Delivery within EU Training offered We have been looking after YAWEI machines for the European market for more than 15 years. We are your service partner for all questions.

Condition: new, Year of construction: 2025, Fiber laser machine for pipes YLT 6025 - AVAILABLE IMMEDIATELY high quality equipment Nlodpfx Aeywucnenfja Laser power: 4kW for pipes and profiles 6200mm length × 20-250mm diameter round 6200mm length × 20mm-200mm square automatic loading 3000-6200 automatic unloading 0-4000mm Equipped with: Precitec Auto Focus cutting head IPG resonator with 4kW incl. guarantee THX tours Siemens control CE safety overTÜV Süd is included: warranty CAD CAM software Installation Delivery within EU Training offered We have been looking after YAWEI machines for the European market for more than 15 years. We are your service partner for all questions. You can test an identical machine under power at any time. Come and visit us!

Condition: used, Electric loading lift - pedestrian stacker, pedestrian stacker for ergonomic handling of small loads EXPRESSO type Lift & Drive 125 (lift2move) Series. No. 194679 Year of construction 2015 Type no. 1418242111 Nominal load capacity 125 kg Lifting distance 1450 mm Lifting height 1785 mm Lifting speed (unloaded / loaded) approx. 100 / 75 mm/s Projection of lifting aid 530 mm Chassis length 890 mm Underride height 90 mm Underride length 490 mm Chassis design (front / rear) Ø 60 / 100 mm (2 swivel castors / 2 swivel castors) Overall length 890 mm Overall width 545 mm Overall height 1930 mm Motor power 250 W Battery capacity 24 V / 7.2 Ah - Electric lift drive with motor brake / self-locking gear and precision spindle with safety slip clutch - Cable remote control with spiral cable and 2 lifting speeds - Battery pack with quick-change system - Charge status indicator - 2 lead-acid batteries 12 Volt, 7.2 Ah installed in the battery pack - External charger 24 VDC, 2.5 amps (mains voltage 230 V, 50 Hz) - Can be rolled by hand, swivel castors with three-stage parking brake - Handle infinitely height-adjustable - Load support U-profile for square according to EXPRESSO standard 210 x 45 mm / internal dimension 30 mm/ 4 M8 fixing holes at 50-60-50 mm intervals Mounted lifting aid: Special version from GIESLER LAM-DC conductor rail Load capacity of the lifting aid 40 kg Dead weight of lifting aid 24 kg Support rail can be moved sideways +-90 mm via linear guides (3 locking points left, center, right) Support rail can be swiveled +-38° (continuously lockable) Nlodpsflt Ebefx Anfoa Support rail with 2 clamps Distance between the clamps 550 mm Material clamping thickness 100 mm Material support dimensions W x D 650 x 155 mm Total weight 75 kg Very good condition

Condition: used, Year of construction: 1985, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, type of input current: three-phase, total height: 1,250 mm, total length: 1,800 mm, total width: 650 mm, overall weight: 1,000 kg, cutting range flat at 90° (X-axis): 400 mm, cutting range flat at 90° (Y-axis): 400 mm, cutting range round steel at 90°: 400 mm, saw blade length: 650 mm, Cutting capacity round: 400 mm Cutting capacity square: 400 x 400 mm Nodoymdizjpfx Anfjla Cutting capacity rectangular: 380 x 300 mm 3 stroke rates: 40/62/90 strokes/min Saw blade dimension: 650x50x2.5 mm

Condition: good (used), Year of construction: 2012, Ref. -No.: 10469 Manufacturer: JAESPA Type: Comfort 420 A Nljdpfx Ansy Ed D Dofoa Year of construction: 2012 Storage location: Halberstadt Machine-No.: 233XXXXX Weight Of The Machine Ca.: 2500 kg Machine length: 2400 mm Machine width: 2800 mm Machine Height: 1700 mm Bending capacity square tube: 420 x 420 mm Bending capacity round bar: 420 mm Bundle min.: 215 x 65 mm Bundle max.: 420 x 170 mm Flat: 420 x 420 mm Roll diameter: 590 mm Saw band dimensions: 4100 x 1300 x 4780 mm Belt speed: 15 - 100 m/min. Operating pressure: 50 bar Flow rate: 6,5 l/min Tank capacity: 40 liter Coolant content: 50 liter Material support height: 800 mm Saw motor: 5,5 kW hydraulic motor: 0,75 kW coolant pump: 0,12 kW Chip brush: 0,09 kW Chip conveyor: 0,18 kW Measurement standard: DIN EN 23746

Condition: good (used), Year of construction: 2007, functionality: fully functional, saw blade diameter: 275 mm, cutting range round steel at 45°: 70 mm, cutting range round steel at 90°: 80 mm, cutting speed: 4,590 mm/min, overall weight: 110 kg, cutting range square steel at 45°: 6,060 mm, cutting range square steel at 90°: 7,070 mm, rotational speed (min.): 45 rpm, rotational speed (max.): 90 rpm, Saw blade diameter: ø275 mm 2 Speeds: 45 and 90 RPM Njdpfsyplwlox Anfjla Suitable for: Steel, Aluminium and Non-Ferrous Materials Miter range: -45° upto +45° Cutting capacity 90° round: ø80 mm Cutting capacity 90° square: 70 x 70 mm Cutting capacity 90° rectangular: 100 x 60 mm Cutting capacity 45° round: ø70 mm Cutting capacity 45° square: 60 x 60 mm Cutting capacity 45° rectangular: 70 x 60 mm Supplied with: - Cooling pump Country of origin: Italy Motor power: 1,90 kW Machine (L×W×H): 900 x 700 x 1650 mm Machine weight: 110 kg

Condition: good (used), Year of construction: 2002, functionality: fully functional, cutting height (max.): 300 mm, cutting width (max.): 360 mm, overall weight: 780 kg, table height: 300 mm, cutting range round steel at 45°: 265 mm, cutting range round steel at 90°: 303 mm, cutting speed: 90 mm/min, Sawcapacity at 90 degree: Round: Ø303 mm Square WxH: 360 x 305 mm Sawcapacity at 45 degree: Round: Ø265 mm Square WxH: 265 x 300 mm Sawcapacity at 30 degree: Round: Ø175 mm Square WxH: 175 x 300 mm Sawingspeed: 20 - 90 m/min. Sawbelt dimensions: 3830 x 25 x 0,9 mm / 3850 x 27 x 0,9 mm Workingheight: 700 mm Featured with: - Mitre sawing - Half automatic - Materialrollerconveyor ca. 8 meter - Machine manuals Country of origin: Germany Motor power: 1,1 kW Nlsdpoyac Uisfx Anfea Machine LxWxH: 2200 x 1250 x 1650 mm Machine weight: 780 kg

Condition: used, Year of construction: 2006, Masterfill Filling Machine S 500 The Masterfill S 500 is a high-performance, precision filling machine designed to meet the demanding requirements of modern dairy and food production facilities. Built for reliability, efficiency, and hygiene, the S 500 delivers consistent filling accuracy across a wide range of liquid and semi-liquid products. Engineered with advanced control systems, the S 500 ensures smooth operation and minimal product waste, making it ideal for filling milk, yogurt, cream, sauces, and other viscous products. Its robust stainless-steel construction guarantees durability while complying with strict food safety and hygiene standards. The machine features user-friendly controls, allowing operators to easily adjust filling volumes and production speeds to suit different product types and packaging formats. With its compact footprint and efficient design, the Masterfill S 500 integrates seamlessly into existing production lines. Key Features - High-precision volumetric filling system - Suitable for liquid and semi-viscous products - Hygienic stainless-steel construction - Easy-to-use control interface - Adjustable filling speed and volume - Low maintenance and easy cleaning - Compact and space-efficient design Applications - Milk and dairy products - Yogurt and desserts - Cream and sauces - Beverage and liquid food products Materfill S500 6 head fill while rise filler M2-AF Serial number 4716 YOM 2006 Filling capacity 2ml to 2000 ml The filler is a 6 head automatic filler, with the capacity to store 50 separate preset menus, Brief FDS • Controlled by Siemens S7 PLC via Mitsubishi Beijer HMI • Jars feed in vis constant stainless steel slat band • Jars indexed via program-controlled infeed and outfeed pneumatic gates. • Jars filled via positive pressure within 50 ltr holding tank (this could be changed easily to a constant positive pressure into manifold via modulating pump) • Volume controlled via Nixon BNO turbine flow meters communications with siemens high speed counter. • Liquid feeds into jar with rise during fill or above jar for fill time • Full SIP, CIP, and flush capability programs available Dico CapperSerial number 3/379Brief FDS  Capper with rotating starwheel  Will cap Square of round Jar/ Bottles (change parts included)  Jar enters, signals PEC starwheel turns 90⁰ under capping head  Capping lowers on cam, retracts on cam  Jar/ bottle clamp activated of adjustable cam onto 5/2 valve  Starwheel turns 90⁰ onto exit conveyor  Current capping head removable, for 40mm cap (no alternative head)  All systems work on cams and relays, no PLC  Motor runs on DOL for capping (clutch adjusted and variable speed gearbox)  Cam motor uses inverter. Guards with interlocked access doorway Required services.  3 Phase 32-amp electrical supply  7 Bar air pressure Main control panel Cap sorter and feederRNASRC-N 400-2LSerial no 00801Brief FDS  40mm cap sorter and feeder  Vibrating bowl agitates caps upwards  Air jets and cut outs sort caps placing in correct orientation Nlsdpfx Aneywuczefea  Cap chute allows smooth passage to dispensing head with some adjustment  Cap dispenser works on bottle/jar passing under and catching cap, this allows the retaining jaws to open and release cap  Side or over independent speed controlled wheel assists in cap leveling Required services.  240V electrical supply  3 Bar air pressure Filling volume: 25-2000 ml Controls: SIEMENS S7 via Mitsubishi H...

Condition: used, Used Winkworth model PV63-25 approximately 63 litre stainless steel process vessel. Unit has a flat top with half hinged lid and welded dished bottom head and includes pneumatically operated raise and lower mechanism. Unit measures approximately 600mm diameter x 450mm straight side. External stainless steel jacket rated 3.5 bar design pressure at 200 deg.c. Unit has a top entry stainless steel contra rotating gate type paddle agitator driven by 1.1kW geared-motor producing 33.6rpm and a 0.75kW geared-motor producing 76.4rpm . Unit has a bottom entry offset Silverson BE275 homogeniser with a square hole disintegrating head driven by a 0.75kW motor. Unit has a local control panel and is mounted on a stand with (4) legs. Nlodjymayvopfx Anfja

Condition: like new (used), functionality: fully functional, Year of construction: 2018, Hydraulic combined punching machine + profile steel shear Manufacturer: Kaast Model: PS 45 Year of manufacture: 2018 Technical data Nsdpfx Anjy Alc Nefela Make: Kaast Model: PS 45 Year: 2018 Punching force: 45 t Power: 4.0 kW Dimensions: approx. L 1.50 x W 0.80 x H 1.70 m Weight: approx. 1.20 t Equipment - Punching station - Steel shear - Square notching station - Central lubrication All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: ready for operation (used), Year of construction: 1977, Immediately available from site: Universal profile steel shear with punching unit Peddinghaus Model 210 / 16 Year of manufacture: 1977 Pressing force: 60 t Punching: 27 x 19 mm Round steel: 50 mm Square: 45 x 45 mm Flat steel: 150 x 19 mm Punching: 27 x 19 mm L profile 90 degrees: 130 x 13 mm L profile 45 degrees: 100 x 11 mm T profile 90 degrees: 130 x 15 mm Njdpfxsy E Nbhj Anfola T profile 45 degrees: 100 x 11 mm Drive: 5.5 kW Weight: 3 t Many punching tools included Price: €1,500 plus VAT, ex site

Condition: ready for operation (used), Year of construction: 1992, Hydraulic Profile Steel Shear Peddinghaus Hydraulic machine with 5 stations for punching, notching, shearing flat steel, angle steel, and solid material. Punch activation by hand lever, profile shear with foot pedal. Throat depth: 510 mm Press force: 60 tons Throat depth: 510 mm Shearing capacity: 500 x 12 or 400 x 16 mm Punching diameter: 27 mm in 17 mm plate Punching diameter: 39 mm in 12 mm plate Round steel: 45 mm Nljdsy E Na Rspfx Anfsa Square steel: 40 mm Angle steel: 120 x 13 mm Flat steel: 500 x 12 mm Drive: 7.5 kW Oil capacity: 80 liters Weight: 3 t Price: EUR 3,000 plus VAT, ex works.

Condition: new, Year of construction: 2022, total length: 4,710 mm, • 4 WD, 4 WS • Automatischen Stabilisatoren für Arbeiten in der Höhe • Automatischer Schlaglochschutz • Einklemmschutz • Großzügige Bodenfreiheit • Selbstverriegelnde Tür • Geschwindigkeitsbegrenzung bei maximaler Hubhöhe • Automatische Bremsanlage • Notbremsenlösung • Non-marking-Reifen • Neigungskontrolle mit Warnmeldung • Akustischer Senkalarm und doppel-Led-Blinkleuchte • Sicherheitsbügel für Wartungsarbeiten • Hupe • Zylindersperrventil • Not-Aus-Taste • Notabsenkung • Schutz des Fahrmotors • Anschlagösen • Borddiagnose • Betriebsstundenzähler • Proportionalsteuerung • Klappbares Geländer • Stromversorgung an der Plattform • Plattformerweiterung • Traglast 600 kg • Traglast, ausgefahren 600 kg • Max. Personenzahl (Innen-/Außenbereich) 2/2 • Arbeitshöhe 22 m • Plattformhöhe 20 m • Gesamtlänge 4,72 m • Gesamtbreite 1,25 m • Gesamthöhe (Geländer aufgeklappt) 3,82 m • Transporthöhe (Geländer eingeklappt) 2,99 m • Radstand 3,18 m • Wenderadius (innen) 0,5 m • Wenderadius (außen) 2,5 m • Fahrgeschwindigkeit (eingefahren) 3 km/h • Fahrgeschwindigkeit (ausgefahren) 0,5 km/h • Batterie 48V/630Ah • Bleibatterien • Integriertes Batterieladegerät 48V/60A • Steigfähigkeit 25% Nodpfx Anjy E Ug Nefola • Max. zulässige Neigung 1°/0° • Non-Marking-Reifen 28x10x22 • Gewicht (CE) 12.350 kg

Year of construction: 2014, condition: ready for operation (used), overall weight: 1,060 kg, cutting speed: 77,000 mm/min, Metal Band Saw manufactured in 2014. This Macc 381 AV features fully automatic operation, a hydraulic clamping vice, and a coolant system. It has a cutting capacity for round material up to 280 mm and square material up to 290 x 290 mm. The machine includes a chip conveyor and a numerical control system for enhanced efficiency. If you are looking to get high-quality cutting capabilities, consider the Macc 381 AV machine we have for sale. Contact us for further details. • Power supply: 3-phase • Main motor power: 0.9 / 1.6 kW • Main motor speed: 700 / 1420 rpm • Hydraulic oil pump motor power: 0.37 kW • Coolant pump power: 0.09 kW • Wheel diameter: 350 mm • Saw blade size: 3010 x 27 x 0.9 mm • Cutting thickness (kerf): 1.2 mm • Cutting angle: 0° • Max vice opening: 320 mm • Vice jaw height: 150 mm • Working table height: 850 mm • Coolant tank capacity: 50 litres • Cutting capacity: • Round: 280 mm • Square: 290 x 290 mm • Rectangular: 290 x 320 mm • Features: • Fully automatic operation • Hydraulic clamping vice • Hydraulic bow movement • Coolant system • Numerical control system MACC4 • Blade tensioning system • Blade cleaning brush Additional equipment • Chip conveyor (auger type) Nsdpfxey Dtu As Anfola

Condition: like new (used), Year of construction: 2018, operating hours: 2,150 h, functionality: fully functional, MEP TIGER 372 CNC LR 4.0 metal circular saw + CB4001 magazine High-performance automatic CNC metal circular saw with microprocessor control for cuts from 45°right to 60°left. Manufacturer: MEP Type: TIGER 372 CNC LR 4.0 Year of manufacture: 2018 Condition: very good, little used Switch-on hours: 2128h Cutting time: 1738h Machine with microprocessor control and two CNC-controlled axes, which allow up to 300 cutting programs, each with its own number of pieces and length, with the same material or material on the CB4001 loading magazine. Cutting range ROUND 0° 120 mm Cutting range ROUND 45° left 115 mm Cutting range ROUND 60° left 115 mm Cutting range ROUND 45° right 115 mm Cutting range SQUARE 0° 110 mm Cutting range FOUR-EDGE 45° left 100 mm Cutting range FOUR-EDGE 60° left 90 mm Cutting area FOUR-SQUARE 45° right 100 mm Cutting area FLAT 0° 180 x 100 mm Cutting area FLAT 45° left 120 x 100 mm Cutting area FLAT 60° left 90 x 90 mm Cutting range FLAT 45° right 120 x 100 mm Infinitely variable speed 15 to 150 rpm Motor 5.5 kW Saw blade 370 x 32 mm Coolant system Length 2500 mm width 1840 mm height 1890 mm Weight:1060 kg Nsdjy Ef Azjpfx Anfela Scope of delivery: - Original documentation - 4x saw blades