Used Steton Cm 104 for sale (11,613)

Condition: new, empty load weight: 140 kg, maximum load weight: 610 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,304 mm, loading space width: 1,256 mm, loading space height: 1,400 mm, tire size: 155/70 R13, Year of construction: 2024, operation weight: 750 kg, Car trailer UNITRAILER Garden Trailer 230 KIPP [with support wheel, 110 cm high tarpaulin and high bows] Transport trailer UNITRAILER Garden Trailer 230 KIPP is the latest product from UNITRAILER. It is currently our largest car trailer with a maximum permissible weight of up to 750 kg. The trailer has a folding tailgate, which enables loading and unloading in just a few minutes. By using a tiltable drawbar, it can be placed vertically on the rear wall. We will take care of all the formalities associated with the purchase for you. The trailer will be delivered to the address you specify within 5 working days together with the registration documents. Once you have received the trailer, you only need to register and insure it to be able to use it in full. Ksdpfx Aet Iv Abegnjdl Height of the side walls: 30 cm Height of the tarpaulin: 110 cm Total height of the loading area: 140 cm Advantages of the Garden Trailer 230 KIPP car trailer If you decide to buy our new car trailer, you will receive a 2-year warranty so that you can use it without worrying about damage. Each product is sent with a user manual and a warranty booklet. All important documents will be sent to you together with the purchased Garden Trailer 230 KIPP. Furthermore, you always have the option of purchasing additional equipment in the form of a jockey wheel or anti-theft device or additional drop sides. If you have any questions or problems when using the trailer, you can contact our advisors at any time. They will be happy to provide you with all the information you need and explain everything to you. Our car trailer can also be used thanks to its tiltable drawbar. This makes it much easier to load and unload goods that you would normally have to lift or put down. This solution is also most often found in much more expensive trailers, which significantly affects the better feeling of using them. Another advantage of this solution is the ability to hold the trailer vertically with the drawbar folded in and resting on the rear dropside. So you don't have to worry about the trailer taking up a lot of space in the garage or not fitting because of the protruding drawbar. You can even put it on the front of the building or anywhere!

Year of construction: 1966, operating hours: 10,000 h, condition: excellent (used), functionality: fully functional, outer diameter: 420 mm, machine/vehicle number: 58256, Nebiolo Saturnia in very good condition. From first owner, at first used as a letterpress in the upcoming market with offset in the 70's. The company always produced with it's offset to maxima 50/70 size. Situated as a local printer in a village, the Nebiolo was sometimes used for rilling, slitting, scoring some offset jobs. very good machine, low noise, excellent condition of al mechanical parts. Airpump for feeder and delivery is for a later make = Becker dry-pump 100m3 with low noise. All parts necessary for the machine come with the machine, even as the original operational book and spare-parts book. The cylinder has a 6 cm larger diameter than a KBA Condor and it weights 800kgs, only 200 kgs less of that of a heidelberg SBB/SBD. The delivery is different and for carton better that that of its competitors: a triple drum delivery, turning the front side up again on the belts which transport it to the pile. Best is to replace the individual belts for one large belt and make some extra attention for laying the sheets down when coming from the belt with better air facilities. Of course we can arrange that for you either. Then you have a faster, very easy to operate and maintain with better productivity and at least the same durability (with lower noise-level due to less moving parts) than an heidelberg SBD with approx the same size for more than double the money. Really a nice product from Nebiolo even as it big brother Urania. They have pull-lays but can easily turn over to push side lays. Some specs: Max paper size 650 x 950 mm Min paper size 300 x 420 mm Speed 1500 - 4000 imp/hour Feeder pile height 550 mm Delivery pile height 650 mm Impression force approx. 35000 N (not adjustable in lighter or heavier, only one value) Bearer height 24,85 mm; machines needs "normal - Bobst standard" 23,80 diecut forms/lines with a hardened steel plate under the form so that small compensations could be made with thin band and paper under this hardened plate. This is the only and best method. A 45 to 47 HRC plate will be delivered with the machine, even as a new cylinder jacket. Kedpfx Ajtyyvwjgnodl Feeder and delivery use an additional extern pump, Becker, 100m3, 2kW Size of the machine (approx, with steps) L x W x H = 330 x 220 x 190 cm Weight net 4,800 kgs

Year of construction: 1968, operating hours: 35,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 7723238, 72x102cm two revolution die cutter for thin paper and light carton up to 600 grs/m2. excellent stable and very silent fast cylinder press. Locking to the floor is not necessary. Price is for each machine, NOT for the package. Package is 15% discount. Two identical machines available from the same shop, both with the same specs and the same state of maintenance. As a kind of specialist in these type of machines, I have delivered machines to this company which already had one, so at certain moment they produced with 4 machines and 6 or 7 Heidelberg Cylinder presses at half the size. maintenance always carried out by my company, so both machines have a known history, which is good. As a result of shrinking industry in The Netherlands and different types of shivering/perforating/scoring on offset presses with the cutting plates, the company went to a smaller building and only kept one Condor. In my opinion the best, fastest and strongest letterpress ever, built in this size, for sure! With less parts than a Heidelberg SBD and running much smoother. As a result of my cooperation with the KBA factory and particular Mr. Hans Bernhard Bolza-Schünemann who is the engineer responsible of the several new innovative constructions in the Condor, a small sized Condor (65x95cm) in very good original condition as a complete printing press, with some ""patina"" was donated to the Leipzig -er Museum für Printkunst (June 2002), because of its importance for the development of the printing industry in the 60's. Kjdjtyy Sfspfx Agnjdl

Year of construction: 1984, condition: excellent (used), functionality: fully functional, Iijima EFC-1600 automatic die-cutting machine with stripping section and front-edge trimming device for bundles, discharge onto conveyor belt. Installed in our workshop and powered on; can be tested. Overall condition is very good. From the second owner, who purchased the machine from DGT in 2001 and used it occasionally for major orders over more than 20 years. The company also had 4 large die-cutters and a Bobst 102. Maximum format 1200 x 1600 mm Corrugated cardboard thickness 2–11 mm Maximum solid board thickness 3 mm Normal maximum die-cutting pressure 350 tons Kdedjv Nzpgspfx Agnsl Die knife height 30.00 mm Machine's own weight 32,000 kg; this is 12,000 kg heavier than the Bobst 1575 EEG, of which this is the significantly reinforced "copy." The machine is too wide for container loading unless dismantled; however, it can be transported on a flatrack or in a conventional closed truck of standard width (< 250 cm wide).

Condition: good (used), Year of construction: 1989, 2-color "straight" offset machine with low-stack explanation; 48x66cm, last modified type of this model (= best) Ksdpfetyqhqox Agnjdl

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 052302303, Bobst Easypress 142, for the format 102x142cm to carry out models, test punching, preparation work for the production machine. excellent condition, year of construction 1997 Kedpjuk I Nxofx Agnedl

Condition: used, URANIA DSK Kdodpfxsw R Eqbs Agnol Maximum paper size: 80 × 112 cm Minimum paper size: 30 × 42 cm • Frame opening (normal): 78.5 × 108.5

Condition: good (used), Year of construction: 2013, 4-color "straight" offset machine with layer stack explanation, autoplate, cocking and CIP3 ink bin and remote control Kodpfx Ajtyqhkognedl

Year of construction: 2023, condition: ready for operation (used), Sorting machine (sorter) for fine material, 320 valves, few operating hours, still assembled and can be tested with your material. Kodjxmvnbspfx Agnedl

Condition: excellent (used), Year of construction: 2018, EMCO Concept MILL 55 Year of manufacture 2018 With tool changer PC-controlled 3-axis universal milling machine for basic CNC training with various industrial controls. Machine complete with full enclosure, CE-compliant safety features, continuously variable main drive, automatic reference point approach, machine light, electrical and mechanical preparation for automation, PC interface card, PC-machine connection cable, data storage device with machine data, tool set for operation, operating manual with spare parts list. The interchangeable control system The interchangeable control system, with which all Concept machines can be equipped, is unique. The user is trained on all commercially available CNC industrial controls on a single machine. Currently, up to eight different controls can be learned. The result: CNC technicians can be deployed flexibly. And that's a decisive advantage: for the specialists as well as for the company. Working Area • Longitudinal X-axis travel: 190 mm • Transverse Y-axis travel: 140 mm • Vertical Z-axis travel: 260 mm • Min. spindle nose-to-table distance: 77 mm • Max. spindle nose-to-table distance: 337 mm Milling Table • Table dimensions (L x W): 420 x 125 mm • T-slots: Number, width, and spacing: 2 x 11 x 90 mm • Max. table load: 10 kg Milling Spindle Drive • Speed range: 150 - 3500 rpm • Three-phase asynchronous motor power: 0.75 kW • Spindle torque: 3.7 Nm Axes • Working feed: 0 - 2 m/min • Maximum feed force X/Y: 800 N • Maximum feed force Z: 1000 N • Average Positioning range according to VDI 3441 in X/Y: 0.008 mm • Average positioning range according to VDI 3441 in Z: 0.008 mm Tool system • Number of tool stations: 8 • Tool selection with directional logic • Max. tool diameter: 40 mm Kjdpfxewkpzlo Agnedl • Max. tool weight: 1 kg Scope of delivery Emco Concept Mill 55 with tool changer Cable Easy2Operate WinNC Sinumerik Operate Base Leveling elements I/O expansion Pneumatic expansion Automatic door Pneumatic vise Robotic interface DNC interface W-holder package

Year of construction: 2007, condition: good (used), Danobat CNC Drilling / Sawing Line – Year 2007 Single Rotating Spindle. Kodpfxjig T Amj Agnedl 18 metres In- Feed Rollers. 12 metres Out- Feed Rollers. Pincher Unit Feed. Infeed Cross Transfers. Outfeed Cross Transfers. 750mm Capacity. Sawing Capacity: Round cutting capacity(without vertical jaws, angle 0 degrees) 520 mm. Rectangular cutting capacity (without vertical jaw, angle 0 degrees) 700mm X 500 mm. Maximum capacity with vertical jaws 700 X 500 mm. Round cut capacity with 45 degree turn, 450 mm. Rectangular cutting capacity with 45 degree turn, 450 X 500 mm.

Condition: used, Included in this package: 1 x upright 11,750 mm x 1,100 mm (galvanized) (The uprights can be cut to any height—just ask us) Available from Berlin or Neuwied For this system, 400 uprights and 2,800 beams are available. Please contact us for more information. Manufacturer: Meta Jungheinrich Type S Condition: used, good condition Height: 11,750 mm Rack depth: 1,100 mm Bracing: bolted Beam length: 2,700 mm Bay load: 11,750 kg with a buckling length of 235 cm Accessories such as: - Floor fixings - Connectors Kdodpfeyvr Swjx Agnsl - Load warning signs - Impact protection guards - Safety barriers - Wire mesh shelves - Back mesh panels - Depth bars - Boundary railings And much more... Just ask! "Benefit from over 20 years of industry experience – we offer you expert and personal advice as your specialist dealer for new and used racking systems." Sales & Delivery Terms (B2B) - Prices & Logistics: All prices are net ex location. Express delivery using our own fleet possible by individual arrangement. - Offer status: All offers are subject to change without notice. Intermediate sale expressly reserved. - Retention of title: Goods remain our unrestricted property until full payment has been received (prohibition of disposal and processing). - Warranty: Exclusive sale to commercial customers (§ 14 German Civil Code). For used and surplus stock, liability for material defects is excluded. For new goods, manufacturer warranties apply.

Condition: excellent (used), The Rational CombiMaster Plus CM 61 is a premium electric combi oven built for professional kitchens demanding performance, precision, and durability. Renowned for its reliability and control. This unit delivers consistent cooking results across steaming, roasting, baking, and combination modes, all within a compact and efficient footprint. Key Features Manufacturer: Rational Model: CombiMaster Plus CM 61 Type: 6-Grid Electric Combi Oven Capacity: 6 × 1/1 GN trays Construction: Full stainless-steel body and chamber Control type: Manual rotary dials with digital temperature and timer displays Cooking modes: Steaming (30°C – 130°C) Convection (30°C – 300°C) Combination (steam + convection) Integrated core temperature probe for accurate cooking control Automatic cleaning and rinse system Double-glazed door with heat-reflective glass for energy efficiency Integrated drain and water inlet system Mounted on stainless-steel Rational stand with GN tray runners Specifications Power: Electric, 3-phase Tray capacity: 6 × 1/1 GN Temperature range: 30°C – 300°C Kjdpfx Aexph H Uognsdl Oven dimensions Height: 780 mm Width: 900 mm Depth: 770 mm Stand dimensions H: 700 mm W: 335 mm D: 285 mm Condition Used – good condition Fully tested and operational Clean stainless-steel finish inside and out Supplied with matching Rational stand Item does not come with documentation for sale within EU.

Condition: ready for operation (used), A container mixer, probably Engelsmann, is available. Container dimensions X/Y/Z: 1200mm/1200mm/900mm, volume: approx. 500l, machine dimensions X/Y/Z: approx. 2750mm/2000mm/2200mm. An on-site inspection is possible. The manufacturer statement is a well-founded assumption. Expected to be available June 2026. Kdjdpfjyxraajx Agnel

Condition: new, Year of construction: 2026, functionality: fully functional, Your advantages at a glance Modular operating equipment system: Enables quick and clean handling of operating resources. Highest protection class IP55: Dust and splash-water protected, ideal for demanding production environments. Kdedpswpr I Eofx Agnjl Maintenance-friendly: Easy maintenance due to the modular print head and a single, long-lasting filter element. Intuitive operation: Large 10-inch touchscreen display for simple setup and handling. Printing of up to 5 lines with various fonts and flexibly controllable data sources. Efficiency and sustainability: Low solvent consumption and durable components sustainably lower operating costs. The continuous inkjets are particularly suitable for industries such as cosmetics, dietary supplements, food and beverage production, pet food, chemicals, as well as logistics and packaging. Thanks to the robust construction and flexible printing options, the devices can be individually adapted. Easy integration into your system.

Condition: used, mileage: 371,140 km, power: 309 kW (420.12 HP), first registration: 12/2012, fuel type: diesel, empty load weight: 10,170 kg, maximum load weight: 15,830 kg, overall weight: 26,000 kg, tire size: 315/80 R22,5, fuel: diesel, brakes: intarder, color: yellow, driver cabin: other, gearing type: automatic, emission class: none, suspension: other, number of seats: 2, total length: 9,600 mm, Year of construction: 2012, construction height: 4,000 mm, number of beds: 1, Equipment: ABS, air conditioning, onboard computer, traction control, trailer coupling, Cylinder head gasket defective The used Iveco STRALIS AS 260 S42 Y/FS-CM Eco is a high-performance truck equipped with a 10,308 cc diesel engine producing 309 kW (420 hp). First registered on 03/12/2012, the vehicle has a mileage of 371,140 km. It complies with the Euro 5 emissions standard and features an automatic transmission. With a length of 9,600 mm, a width of 2,550 mm and a height of 4,000 mm, this truck offers a permissible gross vehicle weight of 26,000 kg. Kodpswzzkyjfx Agnedl The yellow (metallic) vehicle is equipped with a green emissions sticker (class 4) and comes with practical features such as a steering axle, reversing camera, and integrated air conditioning. It offers seating for two persons and has two doors. The truck has previously had one owner and is in used condition. In addition to the technical specifications, the seller offers various flexible sales and service options, including the possibility of viewing and delivery within Germany. Sale exclusively to traders (agriculture, self-employed professionals, small and large businesses) or for export. Subject to prior sale and errors excepted.

Condition: used, mileage: 835,837 km, power: 309 kW (420.12 HP), first registration: 11/2010, fuel type: diesel, empty load weight: 9,580 kg, maximum load weight: 16,420 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, brakes: intarder, color: yellow, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 9,480 mm, Year of construction: 2010, construction height: 3,850 mm, number of beds: 1, Equipment: ABS, air conditioning, cruise control, onboard computer, traction control, trailer coupling, The Iveco STRALIS AS 260 S42 Y/FS-CM is a versatile used truck, ideal for commercial use or export. First registered in November 2010 and with a mileage of 835,837 km, this vehicle is powered by a powerful diesel engine that delivers 309 kW (420 hp) and meets Euro 5 emissions standards. Equipped with an automatic transmission and a steerable and liftable axle, the STRALIS offers excellent maneuverability and is flexible in use. The vehicle is presented in a striking yellow metallic paint finish. With an overall height of 3,850 mm, a width of 2,550 mm and a length of 9,480 mm, it is designed for heavy load transport and has a permissible gross vehicle weight of 26,000 kg. Kedpfsr Uzgcjx Agnodl The equipment includes two doors and two seats, air conditioning and an INTARDER braking system, which provides additional safety. The truck is approved as a truck and has a green environmental sticker (4), which allows it to be used in environmental zones. With only one previous owner and regular maintenance, the STRALIS is ready for efficient use. Steering and lifting axle Only sold to commercial customers (agriculture, freelancers, small and large businesses) or export. Subject to errors and prior sale.

Condition: used, mileage: 366,769 km, power: 309 kW (420.12 HP), first registration: 10/2011, fuel type: diesel, empty load weight: 9,630 kg, maximum load weight: 16,370 kg, overall weight: 26,000 kg, tire size: 315/80 R22,5, fuel: diesel, brakes: intarder, color: yellow, driver cabin: other, gearing type: automatic, emission class: none, suspension: other, number of seats: 2, total length: 9,500 mm, Year of construction: 2011, construction height: 4,000 mm, number of beds: 1, Equipment: ABS, air conditioning, onboard computer, traction control, trailer coupling, Shifts up to 2nd gear. The used Iveco STRALIS AS 260 S42 is a reliable truck of emission class Euro 5, making it ideal for commercial operators in sectors such as agriculture and export. Equipped with a powerful 309 kW (420 HP) engine and a displacement of 10,308 cc, it offers impressive performance. The truck features an automatic transmission and has a mileage of 366,769 km. First registered in October 2011, the vehicle is in good condition and is supported by a green environmental badge. The yellow metallic paintwork gives the vehicle a striking appearance. Useful features such as a steering axle, lift axle, and an INTARDER system provide enhanced handling and safety. In addition, the installed air conditioning ensures driving comfort. Kjdeupac Iepfx Agnsdl This Iveco truck has a total height of 4,000 mm, a width of 2,500 mm, and a length of 9,500 mm, with a permissible gross weight of 26,000 kg. For transport purposes, the vehicle offers cargo options and a trailer hitch mechanism (AHK). Interested buyers can inspect the vehicle without prior appointment from Monday to Friday or on Saturdays. Sale only to commercial operators (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted.

Condition: used, Sawing machine, automatic saw, automatic cutting machine, Adige CM501 – used machine Manufacturer: Adige Kedey Ayc Djpfx Agnodl Model: CM 501 Year: 1996 Blade diameter: 250–360 mm Cutting length: 2100 mm Max. workpiece diameter (round): 85 mm Max. workpiece size (square): 70 × 70 mm The ADIGE CM501 automatic circular sawing machine, manufactured in 1996 in Italy, is designed for fully automatic cutting of solid materials, tubes, and profiles made of steel, brass, aluminium, and other light alloys in industrial production environments.

Year of construction: 2001, condition: used, machine/vehicle number: 15026, Format: 720 x 1040 mm Kdodpowabbvsfx Agnol The machine is a foil hot stamping machine, e.g., for holograms. It consists of a feeder, printing unit, and delivery unit (see photos). A total of 70 machines were built. The machine is currently fully functional with the new control system. The estimated cost to bring it into operation is approximately €150,000-200,000 (dismantling, transport, assembly, commissioning, training, documentation for the new control system).

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Distance between centres: 2000 mm Centre height: 230 mm Max. swing diameter: 455 mm Max. workpiece weight between centres: 800 kg Max. workpiece weight cantilever (incl. clamping device): 200 Nm X-axis traverse movement: Electromechanical drive with ball screw X-axis traverse movement: Cross feed speed 0.01 – 8,000 mm/min X-axis traverse movement: Setup via electronic handwheel or direction push button X-axis traverse movement: Measuring system with glass scale, internal resolution 0.0005 mm Z-axis table movement: Table feed speed 0.01 – 10,000 mm/min Workpiece spindle motor: 3.0 kW at 0–300 rpm Workpiece spindle taper: MK5 and KK5 Control: SIEMENS 840 D solution line Operation via dialog-guided interface Electronic handwheel available Grinding spindle motor: 11 kW Peripheral grinding wheel speed: 35 (50) m/s Standard grinding wheel: 600 x 80 x 203.2 mm Right face grinding wheel: 300 x 40 x 127 mm Internal grinding spindle by customer specification Tailstock taper: MK4 Tailstock operation: manual (hydraulic) Tailstock foot switch with quill stroke 40 mm and MK5 Card index / data management for workpiece data, up to 100 grinding wheels and 40 dressers Cylindricity error correction program-controlled for all dressable grinding wheels Dressing from the workpiece spindle headstock or from the tailstock Dressing allowances automatically compensated Optional integration of diamond form rolls or swivel dressers Various dressing strategies available in the control system Integrated CAD program (optional) Import of existing CAD data (optional) B-axis infinitely adjustable Fast and repeatable positioning Available grinding spindle configurations: External grinding wheel left External grinding wheel left + right face grinding wheel External grinding wheel left + external grinding wheel right External grinding wheel left + internal grinding spindle External grinding wheel left + right face grinding wheel + internal grinding spindle Production machine Can be equipped with loading portal and in-process measurement control Kodpfoynubwox Agnodl Modular system / options: Manual or fully stepless automatic B-axis swiveling Number and configuration of grinding spindles (external and internal) Positionar (Z-length measuring sensor) Spark-out detection In-process measurement control Controlled C-axis (non-circular grinding) Hydrostatic guideway in X-axis (infeed axis) Swivel dresser, diamond form roll Servo-controlled tailstock with programmable holding force Network integration Data backup Remote maintenance Universal paper band filter Compact air purification unit Grinding cycles: X-plunge grinding Z-plunge grinding Z-longitudinal grinding Angular plunge grinding Multi-X-plunge grinding Contour grinding Angular oscillation Positionar cycle Non-circular machining Face grinding Z-peel grinding Auxiliary function The machine was commissioned at the end of 2012 Modernizations 2022 Repair grinding table: €255.40 Removal of tailstock: €1,174.50 Removal of tailstock, 2nd technician: €868.50 Installation of overhauled tailstock: €1,875.00 Installation + overhaul tailstock: €12,073.42 Total documented work volume: €16,246.82

Condition: good (used), Format: max 720 x 1,040 mm; min 360 x 520 mm Thickness (sealed materials): max 0.5 mm; min 0.06 mm Total dimensions (W x H x L): 3,340 x 8,960 x 2,175 mm Weight: 26,920 kg Kdsdpsqrqwmofx Agnsl Equipment - Steel plate feeder & delivery - Unimatic C3 remote control - Automatic color adjustment via the control panel - Lateral, linear and diagonal register from computer - Powder applicator Perfecting - 2/2-4/0

Condition: ready for operation (used), Size max 720 x 1040 mm min 360 x 520 mm Image area max 710 x 1030 mm Kjdpedz Alcofx Agnjdl Speed max 13.000 c/h Pile height feeder 1400 mm Pile height delivery 1130 mm Equipment • pile feed & delivery • perfecting • Dahlgren dampening • Baldwin refrigerated recirculation • powder spray & Baldwin sheet decurler

Condition: excellent (used), Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: TGL, Manometer -1-0 bar, unused, original packaging -Type: 1/BM 20/2 160Ø -1-0 kp/cm² -Number: 2x pressure gauges available -Price: per piece -Cardboard dimensions: 200/180/H70 mm -Weight: 0.9 kg Kdedpfxjyfmt Ho Agnjl

Condition: excellent (used), Contact pressure gauge, pressure switch, pressure gauge, test pressure gauge, differential pressure switch, pressure switch, low pressure switch -Manufacturer: VEB, Contact manometer 0 - 0.1 bar / 0-10 kp/cm² unused original packaging -Manometer: Type 1/BM 20/2 160Ø -Switch: 220V 30W 30VA -Number: 6x pressure gauges available -Price: per piece -Cardboard dimensions: 240/240/H125 mm Kodeyfffzepfx Agnedl -Weight: 0.9 kg/pc.