Used Wohlenberg A 43 Do for sale (70,076)

Condition: excellent (used), Year of construction: 2021, Angular sawing plant Numerical Control PowerControl V2.1 - CADmatic 5 (Tapio ready) No. 1 Rollers table for pre-loading (useful mm 2200 x 4500 approx) Lifting table (mm) 4300 x 2200 1st Rear-pusher, with No. 4 clamps/grippers 1st Panel Saw - Max cutting width mm 4300 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Hnedpfx Apex Aqdcsyen Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min 2nd Rear-pusher, with No. 8 clamps/grippers 2nd Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min No. 2 Front supporting tables with Air blowing system (2 x mm 800 x 2810) Total installed power A 102 OPTION: No. 1 Waste grinder

Condition: excellent (used), winch rope, crane rope, hoist rope, wire rope, stainless steel rope, forestry winch rope Hjdsvxf Ilopfx Apyenn -Manufacturer: DIEPA Drahtseilwerk Dietz, crane rope winch rope Ø 22 mm -Rope type: DIEPA X 43 Ø 22 mm RHOL 1770 with 1 end with full thimble, see photos -Length: 44 m -Number: 4x wire rope available -Price: per piece -also other crane ropes: available -Transport dimensions: Ø 700 x 510 mm -Weight: 120 kg / piece

Condition: good (used), Guide cylinder, guide pneumatic cylinder, pneumatic cylinder, compact cylinder -Manufacturer: Festo, guide cylinder type DFM-20-40-PA-GF 170843 -Piston: Ø 20 mm -Stroke: 40mm -Sliding guide -Quantity: 3x cylinders available Hsdpfx Aoqv Hp Ajpyonn -Price per piece -Dimension: 120/80/H60 mm -Weight: 1.1 kg/pc.

Condition: used, Guide cylinder, guide pneumatic cylinder, pneumatic cylinder, compact cylinder Hjdpeqv Hqrefx Apyenn -Handover: in current condition as seen -Printing plate: missing, see photos -Manufacturer: Festo, guide cylinder without pressure plate -Type DFM-20-40-PA-GF 170843 -Piston: Ø 20 mm -Stroke: 40 mm -Piston rod: Ø 10 mm / M 10 x 1.25 -Sliding guide -Dimension: 95/83/H57 mm -Weight: 0.6 kg

Year of construction: 2026, condition: new, WOODGRAIN STUMP GRINDER – POWER AND PRECISION FOR YOUR GARDEN 420 cm³ Engine | 9 kW (12.24 HP) Power | 300 mm Cutting Disc | Tungsten Carbide Teeth Looking for a reliable machine that will permanently eliminate troublesome tree stumps after tree removal? The Woodgrain is a professional petrol-powered stump grinder designed for efficiency, durability, and operator comfort. Thanks to its compact design with a width of only 75–80 cm, the machine can easily access areas unreachable for heavy forestry equipment. KEY FEATURES OF THE FP15 STUMP GRINDER POWERFUL PETROL ENGINE: The heart of the machine is a proven 4-stroke engine with a displacement of 420 cm³ and power output of 9 kW. This ensures stable operation even when grinding hard wood. HIGH-PERFORMANCE CUTTING SYSTEM: A 90 mm thick and 300 mm diameter cutting disc equipped with tungsten carbide teeth (TCT). These teeth are extremely hard and highly resistant to wear and dulling. LARGE WORKING RANGE: The machine allows stump grinding deep below ground level (up to approx. 225 mm) and high above ground level (up to 515 mm), enabling complete removal of tree remains. MOBILITY AND STABILITY: Large 13" pneumatic wheels make transportation over uneven terrain easy, while the drum brake allows one wheel to be locked, creating a pivot point for smooth side-to-side grinding motion. TECHNICAL SPECIFICATIONS Specification Value Brand Woodgrain Engine Type 4-stroke OHV, air-cooled Engine Displacement 420 cm³ Rated Power 9.0 kW / 12.24 HP Starting System Manual recoil start Fuel Tank Capacity 6.5 l (unleaded petrol) Oil Capacity 1.1 l Cutting Disc Diameter 300 mm Grinding Disc Thickness 90 mm Number of Cutting Teeth 9 pcs (tungsten carbide) Grinding Depth (below ground) up to 225 mm Grinding Height (above ground) up to 515 mm Machine Weight approx. 110 kg SAFETY AND COMFORT Emergency Safety Switch: Positioned within easy reach of the operator for immediate machine shutdown in emergency situations. Adjustable Handle: Allows the handle height to be adjusted according to the operator’s height and working depth, significantly reducing strain on the back. Hnedpfx Apjy Sggnjysn Robust Construction: The metal housing protects the engine and components from mechanical damage and flying wood debris. PACKAGE CONTENTS Woodgrain stump grinder Complete set of cutting teeth (pre-installed) Service tool kit User manual

Condition: new, working width: 430 mm, area performance: 1,720 m²/h, overall weight: 83 kg, input voltage: 230 V, water tank capacity: 35 l, Technical specifications: Condition - NEW! Catalog number: 1.515-401.0 Model: Kärcher BD 43/35 C Ep Power supply: 230 cable Drive: Propulsion via brush rotation Brush working width (mm): 430 Suction working width (mm): 750 Fresh/dirty water tank capacity (l): 35 / 35 Theoretical area coverage (m²/h): 1720 Brush speed (rpm): 180 Brush contact pressure (g/cm² / kg): 30 – 40 / 22.5 – 28 Water consumption (l/min): max. 2.7 Sound pressure level (dB(A)): 70 Color: anthracite Total weight with water (kg): 83 Weight without accessories (kg): 48 Dimensions (L × W × H) (mm): 1135 × 520 × 1025 Scope of delivery and equipment: 750mm V-shaped suction bar with oil-resistant polyurethane rubber pads 430mm red disc brush - medium-hard Features: 2-tank system Hnodpfx Asya E N Aepyjn Advantages: - Self-explanatory symbols and clear control panel. Solenoid valve for automatic water shut-off after releasing the dead man's switch. Easy operation thanks to a few, yellow-coded controls. - Highly maneuverable and easy to handle. Excellent visibility of the area to be cleaned. - Designed for daily use. Robust, durable, and reliable machine.

Condition: new, machine/vehicle number: Katalognummer: 1.515-400.0, working width: 430 mm, area performance: 1,720 m²/h, overall weight: 115 kg, warranty duration: 24 months, water tank capacity: 25 l, Technical specifications: Condition - NEW! Catalog Number: 1.515-400.0 Drive type: Battery (not included in the set) Drive: Propulsion by brush rotation Brush working width (mm): 430 Vacuum working width (mm): 750 Fresh/dirty water tank (l): 25 / 25 Theoretical area performance (m²/h): 1720 Brush speed (rpm): 180 Brush contact pressure (g/cm² / kg): 30 – 40 / 22.5 – 28 Water consumption (l/min): max. 2.7 Sound pressure level (dB(A)): 66 Color: anthracite Total weight with water (kg): 115 Weight without accessories (kg): 40 Dimensions (L) × W × H) (mm): 1135 × 520 × 1025 Scope of delivery and features: The set does NOT include batteries or a charger. V-shaped 750mm suction bar with oil-resistant polyurethane rubber. Disc brush 430mm red - medium-hard. Features: 2-tank system. The option of a machine ready to work with batteries and charger is available in our other listings. Hnedpfx Aoxnptgspysn Advantages: Self-explanatory symbols and a clear control panel. Solenoid valve for automatic water stop after releasing the deadman's switch. Simple operation thanks to a small number of yellow-coded controls. Very maneuverable and easy to handle. Excellent visibility of the area to be cleaned. Designed for daily use. Robust, durable, and reliable device.

Condition: used, Year of construction: 2016, functionality: fully functional, The Fillpack 4-Head pouch filler is the ideal machine for fast, precise dosing of ready-to-use foods. With its four dosing heads, it enables efficient filling of trays, guaranteeing even product distribution. It is particularly well suited to preparations such as Cantonese rice, tabbouleh and pasta, enabling a wide variety of applications in the food industry. Thanks to its advanced design, it integrates perfectly into production lines, offering high output while maintaining high precision. This dosing machine stands out for its ability to reduce product losses thanks to its high-performance dosing system. It is capable of adapting to different volumes and textures, making it a versatile piece of equipment to meet the varied needs of producers. What's more, the Fillpack pouch filler guarantees clean, waste-free handling, helping to optimize production processes. Its use not only improves efficiency, but also maintains high quality standards throughout the packaging process. Technical specifications: 4 heads Brand: Fillpack Max output (previous use): 70 strokes/minute, i.e. 280 trays/minute Hnodju Ibx Aopfx Apysn Products previously dosed: Cantonese rice, Tabbouleh, Pasta... Year : 2016 Dimensions : 3350 x 1580 x 3560 mm Weight : 600 kg

Condition: new, Year of construction: 2026, The CORMAK H-350SA column band saw is a high-performance machine for cutting solid workpieces and profiles in an automatic cycle. Robust body and sturdy saw frame in combination with the column structure ensure excellent rigidity and exceptional stability during cutting even the most difficult-to-cut metals. The cutting-off machine is equipped with PLC control and an easy-to-use touch screen. The undoubted advantage of The unquestionable advantage of this model is its swivel head which allows cutting in the following ranges 0°- 60° - in automatic cycle as well as semi-automatic - infinitely adjustable angle. angle adjustment. Manual and Automatic mode: The cutting-off machine allows both manual operations from the machine control panel in manual mode and an automatic cutting cycle in automatic mode, eliminating the need for constant operator assistance. Vise top pressure: The cutting machine is adapted to package cutting Automatic Cutting Cycle: In automatic mode, the entire cutting process, including clamping the workpiece, moving it to the specified dimension, lowering the cutting arm and raising it after the cut is completed, is carried out without operator intervention. Hnedpfswdunwex Apyon Panel Controlled Parameters: Cutting parameters such as number of pieces, workpiece dimensions, belt speed, and more, are set and controlled via a control panel with an easy-to-use touchscreen. Robust Construction: The machine body is made of cast iron set on a rigid, space-age slab chassis structure for exceptional rigidity and stability. Cutting belt drive: A powerful three-speed motor, hydraulic belt tension and cooling system and cleaning brush contribute to precise and efficient cutting. Safety System: If the cutting belt breaks, the machine stops automatically, increasing operator safety. Hydraulic Material Feeding System: This system allows the machine to cycle fully automatically, with precise setting of the material feed length. Innovation and ISO Standards: Cormak provides innovative solutions and production in accordance with ISO:90001 and ISO:140001, which demonstrates the high quality, safety and reliability of the product. Technical data: Cutting range Ø350 or 350 x 350 Belt 4515 x 34 x 1.1 mm Cutting speeds 27/45/69 m/min. Total power 4.8kW Hydraulic power pack 0.75kW Coolant pump 0,04kW Belt tensioning hydraulic Feeder stroke 500 mm Load capacity 1500 kg Table height 700 mm Dimensions 2800 x 2200 x 1700 mm Weight 1500kg

Condition: new, Year of construction: 2026, The CORMAK H500SA automatic bandsaw is a technologically advanced double-column metal bandsaw designed for precise and efficient cutting of large steel components, tubes and profiles. With complete process automation, high cutting power and a durable structure, it performs perfectly in serial production and heavy-duty industrial operations. Main Advantages Automatic cutting cycle – the full cutting sequence from loading to arm return is performed without operator involvement. Hydraulic vice and material feed – ensuring fast, firm and precise clamping and feeding of the workpiece. High cutting capacity – suitable for materials up to Ø500 mm or 500 × 500 mm. Hydraulic blade tensioning – automatically maintains optimal tension for stable cutting performance. Cooling system and powered cleaning brush – extend blade life and improve surface quality. Construction and Technology The machine is based on a heavy-duty cast-iron and steel structure providing high rigidity and minimising vibrations during operation. The double-column design of the H500SA ensures cutting precision and long-term durability. Equipped with a 7.1 kW main motor and an independent hydraulic system, it delivers reliable performance under continuous use. The frame is inclined at a 3° angle to the work surface for more effective cutting of profiles and sections. The blade is guided by carbide-insert and roller bearings that ensure perfect blade tracking. The movable guide head automatically adjusts to the material width, enhancing stability and reducing blade wear. Precision and Productivity Hydraulically controlled arm feed with smooth pressure adjustment allows precise adaptation to the material being cut. The LCD control panel enables programming of the number and length of cut pieces, as well as real-time monitoring of cutting parameters. The machine automatically detects the end of material, faults, and operation status, ensuring uninterrupted production with maximum efficiency. Applications The CORMAK H500SA is an industrial metal bandsaw recommended for: Steel structure fabrication plants Serial production in metal workshops Cutting heavy steel pipes and profiles Large-scale steel processing and tool steel cutting operations Standard Equipment Full automatic cutting cycle Arm and vice position memory Hydraulic unit and feed system Hydraulic blade tensioning Powered blade cleaning brush Coolant circulation system Bimetal bandsaw blade CE Declaration of Conformity Technical Data Cutting range Ø500 mm or 500 × 500 mm Blade dimensions 5550 × 41 × 1.3 mm Blade speeds 40 / 60 / 80 m/min Main motor power 7.1 kW Hydraulic power unit 1.5 kW Coolant pump 0.09 kW Blade tensioning Hydraulic Feeder stroke 500 mm Load capacity 3 t Table height 600 mm Machine dimensions (L × W × H) 2900 × 2200 × 1900 mm Weight 2400 kg Hnsdpfxoyctwmo Apyon

Condition: new, Year of construction: 2026, The CORMAK H - 280 SA column band saw is a highly efficient machine for cutting bars, pipes and profiles made of steel, cast iron and non-ferrous metals in an automatic cycle. The solid body and strong frame of the saw, combined with the column construction, provide excellent rigidity and an exceptional level of stability during the cutting process of even the most difficult metals to machine. The cutter is equipped with a PLC controller and an easy-to-use touch screen. Automatic band saw work on manual and automatic modes. Manual mode allows you to perform all activities manually from the machine's desktop. Automatic mode - after switching on the machine, the entire cutting cycle, i.e. fixing the cut detail in the vice, its shift to a specific dimension to the cutting tape, leaving the arm to cut and its raising to the desired height after finished cutting takes place without the operator's operation. Cutting parameters, such as the number of pieces of cut details, their dimensions, the speed of the cutting band, the speed of the arm's descent, are set on the control panel. The device automatically stops when the series is cut, the cutting band breaks or another failure identified by the cutter's control system is detected. The body of the machine is a cast iron set on a rigid, spatial plate structure of the casing. Inside the housing there are: a hydraulic unit, a coolant tank with a pump and a chip feeder. The drive of the cutting band based on an inverter-controlled motor ensures smooth regulation in a large range of speeds. The hydraulically forced lowering of the arm is regulated in a wide range by a precise throttle valve. The fast feed system allows you to shorten the time of cutting individual elements. Hydraulic material feeding system ensures a fully automatic working cycle of the machine. The controller equipped with an LCD display allows you to program the operation of the saw, signals the end of the material, communicates errors and informs about the number of cut sections after the programmed time. The maximum material feed length in one stroke is 500 mm with an accuracy of +/- 0.2 mm per stroke. Innovativeness and production of CORMAK semi-automatic and automatic series cutters according to norms and standards compliant with ISO:90001 and ISO:140001 certificates, guarantee safety, quality and product reliability. The use of motors licensed by a well-known and respected manufacturer on the global market, one of the world's leaders, ABB, guarantees long and trouble-free operation. Technical data Cut range Ø280 or 280 x 280 Band saw blade 3505 x 27 x 0.9mm Cut speeds 40/60/80 m/min. Engine 3kW Hydraulic power pack 0.75kW Coolant pump 0.09kW Feeder pitch 500mm Load capacity 1500 kg Dimensions 1750x1900x1550mm Hnjdpoiz S Nysfx Apyen Weight 1100 kg Max. cutting range angle 0º ø280 280 × 280 Standard equipment work in automatic cycle arm position memory function built-in hydraulic unit vise position memory function change cutting speed motorized belt cleaning brush cooling system bi-metal band saw CE Declaration of Conformity Manual in Polish and English For more information visit our web page

Condition: new, Year of construction: 2026, The CORMAK H - 260SA column band saw is a highly efficient machine for cutting bars, pipes and profiles made of steel, cast iron and non-ferrous metals in an automatic cycle. The solid body and strong frame of the saw, combined with the column construction, provide excellent rigidity and an exceptional level of stability during the cutting process of even the most difficult metals to machine. The cutter is equipped with a PLC controller and an easy-to-use touch screen. Automatic band saw work on manual and automatic modes. Manual mode allows you to perform all activities manually from the machine's desktop. Automatic mode - after switching on the machine, the entire cutting cycle, i.e. fixing the cut detail in the vice, its shift to a specific dimension to the cutting tape, leaving the arm to cut and its raising to the desired height after finished cutting takes place without the operator's operation. Cutting parameters, such as the number of pieces of cut details, their dimensions, the speed of the cutting band, the speed of the arm's descent, are set on the control panel. The device automatically stops when the series is cut, the cutting band breaks or another failure identified by the cutter's control system is detected. The body of the machine is a cast iron set on a rigid, spatial plate structure of the casing. Inside the housing there are: a hydraulic unit, a coolant tank with a pump and a chip feeder. The drive of the cutting band based on an inverter-controlled motor ensures smooth regulation in a large range of speeds. The hydraulically forced lowering of the arm is regulated in a wide range by a precise throttle valve. The fast feed system allows you to shorten the time of cutting individual elements. Hydraulic material feeding system ensures a fully automatic working cycle of the machine. The controller equipped with an LCD display allows you to program the operation of the saw, signals the end of the material, communicates errors and informs about the number of cut sections after the programmed time. The maximum material feed length in one stroke is 500 mm with an accuracy of +/- 0.2 mm per stroke. Hnodpfjiz S I Hex Apyon Innovativeness and production of CORMAK semi-automatic and automatic series cutters according to norms and standards compliant with ISO:90001 and ISO:140001 certificates, guarantee safety, quality and product reliability. The use of motors licensed by a well-known and respected manufacturer on the global market, one of the world's leaders, ABB, guarantees long and trouble-free operation. Technical data Cut range Ø260 or 260 x 260 Tape 3150 x 27 x 0.9mm Cut speeds 40/60/80m/min Engine 2.2kW Hydraulic power pack 0.75kW Coolant pump 0.09kW Feeder stroke 500mm Load capacity 1500 kg Dimensions 1600 x 1800 x 1550mm Weight 1000 kg Max. cutting range angle 0º ø260 260 × 260 Standard equipment work in automatic cycle arm position memory function built-in hydraulic unit vise position memory function change cutting speed motorized belt cleaning brush cooling system bi-metal band saw CE Declaration of Conformity Manual in Polish and English For more information visit our web page

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø mm Hodpfxewux Ucs Apyenn -Mounting: Hole shaft cone Ø 34-43 mm / M50 -Type designation: not available -Dimensions total Ø 180 x 80 mm -Weight: 7 kg

Condition: good (used), Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Sempress type: ADO-MAEFlange: Ø 40 mm -Thread: M16 x 1.5 Hnjdped Nn Idefx Apysn -Stroke: 980 mm -Dimensions: 1180/65/65 mm -Weight: 8.1 kg

Condition: new, Year of construction: 2026, The CORMAK H400SA automatic bandsaw is a high-performance industrial machine designed for accurate and repeatable cutting of large steel parts, tubes and closed profiles. With its double-column structure and fully automated cutting cycle, it is ideally suited for production facilities, metal workshops and logistics centres dealing with large-scale material processing. Main Advantages Automatic operation – full cutting cycle without operator intervention: clamping, feeding, cutting and arm return. Hydraulic feed and vice system – ensuring fast, safe and precise cutting. Arm and vice position memory – shortens cycle times and increases efficiency in serial production. Cooling system and powered blade cleaning brush – extend blade life and improve cutting quality. Large cutting capacity – materials up to Ø400 mm or 400 × 400 mm. Construction and Technology The double-column CORMAK H400SA bandsaw is built on a robust welded steel frame with a cast-iron body, ensuring maximum rigidity and vibration damping. The saw arm is set at a 3° angle relative to the work table, which facilitates cutting of profiles and hollow sections. Precision and Productivity Hydraulically controlled arm feed with adjustable cutting pressure and precision throttle valve allows accurate adaptation to various materials. The hydraulic feeding system with electronic control enables programming of cutting length and quantity. The LCD display provides information about progress, errors, and material status. An automatic stop system halts operation in case of faults or programme completion, ensuring safe and efficient performance. Applications The CORMAK H400SA model is ideal for: Metalworking and steel construction industries Profile and section processing centres Serial production in workshops and industrial plants Logistics companies cutting materials to size Standard Equipment Automatic working cycle Arm and vice position memory Hydraulic unit and feed system Powered blade cleaning brush Coolant circulation system Bimetal bandsaw blade for metal CE Declaration of Conformity Technical and Operation Manual (DTR) TECHNICAL PARAMETERS Cutting range Ø400 mm or 400 × 400 mm Blade dimensions 4900 × 41 × 1.3 mm Blade speeds 40 / 60 / 80 m/min Hnjdpfx Apeyctr Rsyen Main motor power 4.6 kW Hydraulic power unit 1.5 kW Coolant pump 0.09 kW Feeder stroke 500 mm Machine dimensions (L × W × H) 2600 × 2400 × 1700 mm Weight 1800 kg

Condition: excellent (used), functionality: fully functional, Shelf length 3500 mm Shelf width 1300 mm New aluminium shelves 6 hydraulic cylinders Piston diameter 70 mm Water heating Ground clearance 390 mm Safety rupture link Year 1999 Hnedpfx Apey N Rdrsyen Weight 4400 kg

Condition: ready for operation (used), working width 4 meters fan motor power 4 kW Hsdpfx Ajy Nikkspyjnn set includes cardboard filter and paint stop filter Italian made electrical panel emergency stop button (STOP) filtration capacity 15,000 m3/h year of production 2022 CE marking

Condition: good (used), Klöckner-Moeller conductor rail system BD O-100 A Klöckner-Moeller Conductor rail system BD O-100 A Hnjdpfx Asuzhxpjpyjn 500 V Busbar 160 cm 120 pieces 192 meters Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), METTLER TOLEDO TOUCHSGREEN SCALES MEAT SCALES used article- no. SEE PHOTO type: UC3-SPCT-A rated voltage: 230 V / 50Hz Max 6/15 kg Min 40 g e= 2/5 g -10°C / +40°C METTLER TOLEDO TOUCHSGREEN SCALE BUTCHER SCALE SAUSAGE SCALES SALES SCALES MEAT COUNTER SCALES Hnodog Dgrxspfx Apyon MEAT COUNTER SAUSAGE COUNTER Due to time constraints, we can only offer answers to this article if you provide us with a telephone number when making your enquiry. 490,-€ net / piece plus 19% VAT. 1 piece currently in stock / for collection from stock 47441 Moers we offer as shown. Viewing is expressly offered. more technology in stock Would you like an offer so please note the following: For a quotation we need a complete complete invoice and delivery address as well as a telephone number. Very important is an e-mail address. We will then make an offer. Under the offer are our bank details. If you would like to accept this offer, please pay and we will ship and we will ship immediately after receipt of money. Automatically, an invoice will be sent to you immediately. Do you have further questions please contact us mfg JS Trading GmbH General information: We offer here from various company liquidations articles, which we describe as well as possible, as well as meaningful photos are posted. Further information about the article can not be made. We offer the possibility, Tuesday and Friday in the time between 9 and 16 o'clock after telephone appointment arrangement.

Condition: good (used), Year of construction: 2012, functionality: fully functional, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X axis: 4,300 mm X axis pendulum operation: 1,620 mm Y axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X axis: 3,300 mm X axis pendulum operation: 600 mm Y axis: 1,240 mm Work table: 8 ATS workpiece supports with 3 vacuum cups each 8 rear workpiece stops, program-controlled lowering, each mounted in one support 8 workpiece stops, 670 mm from rear, each mounted in one support 2 + 2 lateral workpiece stops 4 removable center stops 6 lift rails, pneumatically program-controlled lowering, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate work zones along the X axis Vacuum assist system for clamping templates Chip conveyor integrated into the machine table Vacuum pump 90 cbm/h Processing head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, diameter 120 mm, fixed in X direction Grooving saw, diameter 120 mm, fixed in Y direction Milling spindle 13.2 kW (11 kW in S1 operation), HSK 63 F Mounted on Z1 axis Speed range 1,000 – 24,000 rpm Clockwise and counter-clockwise rotation C axis 360 degrees for adapter units Cleaning nozzle for cleaning the milled edge before the edge banding process Tool magazine for 16 tools Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC controlled, with 360 degree endless rotation Glue application for hotmelt adhesive Double pressure roller, interchangeable and can be switched off Heating lamp for preheating edge band material End trim unit to cut the edge band material at an 8-degree angle to the workpiece edge using circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid wood edge thickness 0.4 – 2 mm (*) (Best results achieved using wood edges with primer from 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Min. inside radius 18 mm for edge thickness less than 1 mm Min. inside radius 30 mm for edge thickness 2 mm Min. panel size for edge banding: 300 x 300 mm Min. size for edge banding of internal cutouts: 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine—this solution limits pendulum processing. Roll diameter for edge material: 800 mm Safety equipment: * Safety mats in front of the machine * Safety fence on the right with access door Hsdpsxraimefx Apysnn Without tools Control system: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Units: - Flush/radius trimming unit - Combination profile/flat scraper unit - Sawing unit

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 420 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 650 mm, For sale is a Remak RX43 A handling system, which was installed on a Ferromatik injection molding machine The handling unit has been dismantled and stored in working order. Technical data Year of construction: 2008 Travel: 420*950*650 mm Power: 3 KW Max load: 100 kg Included: Teach Panel Switch cabinet Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale Hjdpfxot Rft Io Apyonn PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: new, machine/vehicle number: 1.515-400.0, working width: 430 mm, area performance: 1,720 m²/h, overall weight: 115 kg, warranty duration: 24 months, water tank capacity: 25 l, noise level: 66 dB, battery capacity: 76 Ah, Technical specifications: Condition - NEW! Catalog Number: 1.515-400.0 Drive type: Battery Hnsdpsxnphqjfx Apyjn Drive: Propulsion by brush rotation Brush working width (mm): 430 Vacuum working width (mm): 750 Fresh/dirty water tank (l): 25 / 25 Theoretical area performance (m²/h): 1720 Battery type: GEL - maintenance-free Charger power supply (V / Hz): 230 / 50 – 60 Brush speed (rpm): 180 Brush contact pressure (g/cm² / kg): 30 – 40 / 22.5 – 28 Water consumption (l/min): max. 2.7 Sound pressure level (dB(A)): 66 Color: anthracite Total weight with water (kg): 115 Weight without accessories (kg): 40 Dimensions (L × W × H) (mm): 1135 × 520 × 1025 Scope of delivery and equipment: - SONNENSCHEIN 12V 76Ah GEL BATTERIES (2x). - NEOS 24V 10A EXTERNAL CHARGER - V-shaped 750mm suction bar with oil-resistant polyurethane rubbers - 430mm red disc brush - medium hard Equipment: 2-tank system Batteries and charger included: - Sonnenschein 76Ah batteries + Neos 24V charger included in the set - Easy charging at any standard outlet. - Mains-independent use without tripping hazards. Advantages: - Self-explanatory symbols and a clear control panel. Solenoid valve for automatic water stop after releasing the dead man's switch. The machine is easy to operate thanks to a small number of yellow-coded controls. - Highly maneuverable and easy to use. Excellent visibility of the area to be cleaned. - Designed for daily use. Robust, durable, and reliable machine. Key features: - Options for attaching hooks, containers, mops, etc. - Additional cleaning tools can be carried. - Very good value for money.

Year of construction: 2009, condition: refurbished (used), functionality: fully functional, 1 piece liquid ring vacuum pump. Please read the description carefully until the end!! The pump is not suitable for: Water, food industry, or non-corrosive media. For these media, more cost-effective materials such as 1.4408 or 1.4571 are more appropriate. Attention!! The pump does not have explosion protection certificates. It is also not possible to replace the motor, as it is a special long-shaft motor. The mechanical seal is also not EX-certified! The pump is made from the special alloy Alloy 59!! This alloy is used when conventional chromium-nickel steels are no longer sufficiently corrosion-resistant. It is especially used where chloride-induced pitting and crevice corrosion or stress corrosion cracking could be an issue. Alloy 59 is used for: environmental technology, chemical industry (chemical processes involving oxidizing and reducing acids, resistance to moist chlorine gas), and waste incineration plants. Grade 2.4605 is predominantly used in the chemical industry, the pulp and paper industry, and in flue gas desulphurization plants. Excellent resistance to mineral acids such as nitric, phosphoric, sulfuric, and hydrochloric acid, especially to mixed sulfuric/hydrochloric acid environments. Typical applications include: - Plant components for organic chemical processes with chloride-containing media, especially when catalysts based on chlorides are used - Multipurpose installations in the chemical industry - Plant parts in the fine chemical and pharmaceutical industries - Scrubbers, heat exchangers, dampers, fans, and agitators for flue gas desulphurization units (FGD) in fossil-fuel power plants and waste incineration plants - SO2 scrubbers for marine diesel engines - Components for seawater and concentrated brine applications - Equipment and components for geothermal and sour gas applications - Reactors for acetic acid and acetic anhydride - Reactors for hydrofluoric acid - Sulphuric acid coolers - Piping in geothermal power plants - Components in flue gas desulphurization units Manufacturer: Busch Type: LC 0220 A ZZO XX ZZ Volume flow: 195 m³/h Motor power: 7.5 kW Voltage: 400/690 Volt Speed: 1440 rpm Vacuum: 33 mbar Material: 2.4605 (Alloy 59) NiCr23Mo16Al All ball bearings new, mechanical seal reconditioned by specialist company. Weight: 121 kg Dimensions: Length 960 mm, Width 370 mm, Height 370 mm Hsdpfjigqutjx Apyjnn Connection: DN 50 (2")

Condition: new, Year of construction: 2025, Working Area: 6100mm*1524mm/4000mm*1524mm/3048mm*1524mm Laser Output Power: 3000W/2000W/1500W/1000W Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Max. linkage speed: 91m/min Max. acceleration: 1G 1. Stretched Aluminum Beam Aviation-level material with enhanced rigidity, greatly reduces beam deformation during high-speed operation, and improves high-speed directional sensitivity and processing efficiency. Hsdpfxjg Eglpe Apysnn 2. Tenon-and-mortise Type Plate Welding Structure Bed Use Chinese traditional Tenon-and-mortise structure to provide stronger bearing capacity. Solder joint fixing and structural bearing ensure long-standing operation stability. Welded structure improves shock absorption effect, lowering deviation caused by shock, and offering more accurate cutting. 3. Double Automatic Centering Electric Chucks Double electric chucks with automatic centering function are easy to operate and require little maintenance. Brand new motor gives accurate control. Modular chuck components are independently developed and can be quickly replaced. 4. Automatic focusing function of laser head By setting perforation focal length and cutting focal length respectively, the cutting is more accurate. Suitable for multiple focal lengths, and focal position will be automatically adjusted based on thickness of different sheets. 5. Low Gas Pressure Alarm Function Real-time gas pressure detection and abnormal information report ensure cutting quality and precision, and remind operators to replace gas in time.

Condition: ready for operation (used), Pneumatic material feeding Feeder roller width: 40 cm Hjdswigbajpfx Apysnn Material feeding from stack Stack height: 84 cm Maximum working width: 26 cm Total length: 240 cm Width: 42 cm Height without stack: 83 cm