Used Angular Gears for sale (8,013)

Condition: used, Synchronous servomotor with holding brake and gearbox, Gear motor, electric motor, right-angle gear motor Motor: Manufacturer: LUST LTI DRIVES Type: LSK-190-7-30-560 T1,P,KK,1R Order No.: 716090 Art. No.: 0970.8016 Machine type: Permanent magnet synchronous servomotor Intermediate circuit voltage of the controller Uzk: 560 VDC Rated power: 14.51 kW Rated speed: 3000 rpm Rated torque Mn: 46.2 Nm Stall torque M0: 83.4 Nm Rated current In: 31.5 A Stall current I0 / I0max: 54.9 / 219.6 A Pole pairs: 3 Shaft diameter: 32 mm Shaft length: 50 mm - Shaft with key and keyway DIN 6885 / A10x8x50 - Option 1R Resolver, single pole pair - Option KK Terminal box - Option T1 (DIN-PTC double basic insulation) - Power connection, 8-pole terminal box - Resolver connection, 12-pole terminal box Holding brake: Manufacturer: LUST LTI DRIVES Type: NFH10-H/BA Order No.: 718690 Art. No.: Rated voltage: 24 VDC Rated current: 4.5 A Rated power: 108 W Braking torque: 65 Nm Right-angle gearbox WESTFALIA Systemtechnik Hollow shaft output: inner Ø 65 mm Ndjdpfof Dlzusx Ah Sec Hollow shaft length: approx. 280 mm Gearbox output speed: max 450 rpm Gearbox input speed: max 4500 rpm Gear ratio: 10:1 - Shaft also ground on the outside - Gearbox can be mounted on two flange surfaces - Mounting holes on the gearbox 180 x 180 mm / 180 x 230 mm Overall dimensions L x W x H: 1110 x 250 x 350 mm Total weight: 180 kg Good condition

Condition: used, heavy gear, angular gear -Translation: 1:16 -Drive shaft hollow shaft: 38 mm -Output shaft shaft: 48 mm -with claw coupling: -Number: 1 piece gear available Ndsdpfjdkf Iqsx Ah Sec -Price: per piece -Dimensions: 470/240/H445 mm -Weight: 59 kg/piece

Condition: used, Gears, angular gears, stin gear, angular gear, transmission gear -Translation: i = 1: 1 -Drive shafts: dimensions see pictures Nsdpfx Ahoft Aico Ssdc -Dimension: Ø 225 x 180 mm -Weight: 9.6 kg

Condition: used, heavy gear, angular gear -Type: E 880 G -Shaft: Ø 20 mm -Length: 50 mm -Flange: Ø 125 mm -Dimensions: 260/280/H160 mm -Weight: 16 kg Nsdjd N N Dqopfx Ah Sodc

Condition: used, Angular gear for heating basins for edge banders, edge banding machines, melting unit with granulate container Nodpfx Asb Uht Ueh Sjdc -Manufacturer: Homag -Dimensions: 440/185/H240 mm -Weight: 30 kg

Condition: good (used), Gear, angular gear, Stinrad gear, transmission gear, worm gear, angular gear for edge banding -Manufacturer: ZAE, angular gear with cardan joint from the BRANDT KS 25 edge banding machine -Type: W 88 Nsdjgylraopfx Ah Sjdc -Translation: i = 2: 1 -Dimensions: 260/100 / H210 mm -Weight: 7.2 kg

Condition: used, Angular gear for heating basins for edge banders, edge banding machines, melting unit with granulate container -Manufacturer: Homag -Nummer: 3 pieces available -different designs -Price: per piece -Dimensions: 300/170/H190 mm Nodpfx Ahob Uhrus Sodc -Weight: 16.8 kg

Condition: good (used), Gearboxes, angular gearboxes, stin gearboxes, angular gearboxes, transmission gears -Translation: 2: 1 -Drive shaft: Ø 25 x 45 mm -Price: per piece -Number: 4 pieces -Dimensions: 240/120/H235 mm -Weight: 13.15 kg Njdpfxofbtgmo Ah Ssdc

Condition: used, Gearboxes, angular gearboxes, stin gearboxes, angular gearboxes, transmission gears Njdpfjb Uht Tsx Ah Ssdc -Translation: 1:2 -Drive shaft: Ø 22 mm -Number: 1x gears available -Price: per piece -Dimensions: 180/110/H110 mm -Weight: 13.3 kg

Condition: used, Gearboxes, angular gearboxes, stin gearboxes, angular gearboxes, transmission gears -Translation: 1:2 Nedpfx Asb Uhrweh Sjdc -Drive shaft: Ø 20 mm -Dimensions: 190/190/H110 mm -Weight: 11.7 kg

Condition: used, total height: 2,000 mm, total width: 1,300 mm, total length: 5,900 mm, Year of manufacture: 1990 Colour: Green Empty weight: 7.500 kg Center-height: 250mm Table-length: 2300mm Travel grinding-spindel: 200mm Gear diameter: 300 mm Module range: 0.5 mm – 8 mm Helix angle: ±35° Max. workpiece weight: 100 kg - Year: 1990 - Documentation available: No - CE certificate present: No - Serial number: 018.0402 - Drive system: CNC - Control system brand: Optronic - Control system type: CNC D140 - Horizontal/vertical: Horizontal - Model: Gear hobbing machine Nsdpfxozy E Tao Ah Sjdc - Min. module [mm]: 0.5 - Max. module [mm]: 8 - Max. workpiece width [mm]: 2300 - Max. workpiece height [mm]: 500 - Max. workpiece weight [kg]: 100 - Table length [mm]: 2300 - Transport dimensions: 5900mm x 1300mm x 2000mm (l x w x h) - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1957, functionality: fully functional, total length: 3,000 mm, total height: 2,600 mm, total width: 2,500 mm, overall weight: 6,000 kg, cutting height (max.): 400 mm, Gear hobbing machine, manufacturer: LIEBHERR, type: L 300, year of manufacture: 1958, max. workpiece diameter: approx. 300 mm, spindle: MK4, net price €16,000 (negotiable) Nsdj Aapgzopfx Ah Sedc

Condition: used, Year of construction: 1988, operating hours: 2,506 h, functionality: fully functional, machine/vehicle number: 032-230, We are offering this Unicontrol 10 window manufacturing machine from Michael Wenig AG. It is in used condition, but fully functional. Year of manufacture: 1988, machine number: 032-230. Nedpfezx Emdsx Ah Ssdc Including control cabinet! Comes with three complete sets of tools from Leitz. - IV68 insert cutter with standard profile - IV68 cornice profile for listed buildings - Tools for wood and aluminum windows The following tools are included (as seen in the pictures): 1x slot cutter, vertical and 1x horizontal 1x slot frame, horizontal 1x tenon cutter, vertical, bottom and 1x top 1x cornice profile slot cutter, horizontal 1x tenon cutter, vertical 7 slot cutters 1x milling head frame, left/right/ top 1x milling head frame, bottom 1x milling head cutter, left/right/ top 1x milling head cutter, 2-wing, vertical 1x milling head cutter, bottom 1x milling head cutter, aluminum, for clipping 1x frame milling head, aluminum, for clipping 1x glass bead cutter, profile, standard 1x glass bead cutter, profile, cornice 1x roller shutter bead cutter It was decommissioned due to lack of space. Further information is available upon request. Stored in a weatherproof location in 96231 Bad Staffelstein - Uetzing. Collection at your own expense, including loading. We are happy to help, but due to the weight and the necessary loading equipment, we cannot take over the loading and transport and cannot provide any guarantee. Private sale. Old, used machine. No warranty, return, or guarantee claims.

Condition: new, Original NSK precision angular contact ball bearing, supplied in its original NSK packaging. Ndjdsz R Uprepfx Ah Soc This bearing comes from industrial surplus stock and was originally supplied to Morgan Construction Co., a manufacturer of steel rolling mill equipment. Technical Specifications: Manufacturer: NSK Model: 7940 ADBCP3 (as indicated on packaging) Bearing type: Precision Angular Contact Ball Bearing Configuration: Matched bearing arrangement (DB) Bore diameter: 200 mm Outside diameter: 280 mm Width: 38 mm per single bearing (nominal) Precision class: P3 (as marked) Country of manufacture: Japan Original packaging date: 04/11/2008 Condition: Unused industrial surplus stock Packaging: Original NSK box and protective wrapping Applications: Suitable for specialized industrial machinery, precision shaft assemblies, rolling mill equipment and other applications requiring accurate shaft positioning and axial load support. Originally supplied for Morgan Construction Co. Location: Botlek Rotterdam, The Netherlands Delivery terms: EXW (Ex Works) Shipping can be arranged upon request. Please contact us for further information or a quotation.

Condition: used, color: other, Year of manufacture: Apr 2016 Year of construction: 2016 Nodpfx Asy Hrhyoh Sjdc VERY NICE GOOD WORKING MODERN TERMINAL TRACTOR.

Condition: excellent (used), The Gleason BGT 100 H-W universal bevel gear testing machine is used for rolling, contact pattern, and runout testing, as well as for measuring backlash, installation dimensions, and sensitivity to displacement in bevel gears with and without axial offset and axial angles from 0° to 180°. Gear sets with a maximum ring gear diameter of up to D = 190.5 mm and hypoid gear sets with a pinion axial offset of 31.75 mm above and below the center can be tested. This testing machine is ideally suited for testing gear sets with small diameters and small modules under low load and with a minimum of backlash. The digital display of the actual values facilitates quick and precise adjustment and reading of the pinion installation dimension, ring gear installation dimension, and axial offset. The motorized drive of the pinion spindle, in combination with the frequency inverter, allows for stepless adjustment of the pinion speed in the range of 0 to 3,000 [1/min]. The work area is protected by an electrically interlocked safety device. Technical Data Neds Afi Atepfx Ah Sjdc Largest gear diameter 190.5 mm Largest axial offset (hypoid offset) above (+) and below (-) the center ± 31.75 mm Largest / smallest distance from the center of the machine to the spindle nose of the ring gear 177.8 / 0 mm Largest / smallest distance from the center of the machine to the spindle nose of the pinion 177.8 / 25.4 mm Smallest / largest axial angle (steplessly adjustable) 0 to 180° Pinion and gear spindle: Diameter at the large end 45.65 mm Taper 1 : 24 Length of the taper 76.20 mm Diameter of the spindle bore, throughout 33.33 mm Speed range of the pinion spindle (steplessly adjustable) 0 to 3,000 1/min Weight 1,050 kg Dimensions L x W x H 500 x 1,100 x 2,000 mm

Condition: good (used), Year of construction: 2011, functionality: fully functional, Max. diameter = 450 mm and module = 10 Nedpfjz Rm Hzjx Ah Sedc Min. diameter = 69 mm and module = 0.9

Condition: used, gearing type: automatic, color: other, Year of manufacture: Apr 2010 Year of construction: 2010 Axle 1: left 8 mm righ8 mm Axle 2: left 8 8 mm right 8 8 mm Nodpfx Ahey Enkbo Ssdc Axle 3: left mm right mm

Condition: excellent (used), Year of construction: 1974, I am selling this machine. It can be tested when connected. Maximum module 25 mm Maximum gear diameter 500 mm Maximum machining length 3,000 mm Nedpfx Aov Nqq Toh Sodc Maximum table load 4,000 kg Maximum cutter diameter 250 mm Maximum cutter length 300 mm Total power 25 kW Machine height 2,100 mm Machine length 7,600 mm Machine width 2,800 mm Machine weight 27.1 t You can send a video of the machine via whatsapp.

Condition: used, gearing type: automatic, color: other, Year of manufacture: Apr 2011 Year of construction: 2011 Nodpfx Asy Ennash Ssdc Axle 1: left 10 mm right 10 mm Axle 2: left 12 12 mm right 12 12 mm Axle 3: left mm right mm

Condition: used, TECHNICAL DETAILS - Maximum workpiece diameter : 80 [mm] - Z-axis travel : 220 [mm] - Max module : 2.5 - Max workpiece-holding spindle speed : 3000 [rpm] - Max dimensions of the hob (diameter x length) : 118 X 120 [mm] - Speed of the hob-holding spindle : 200-5000 [rpm] - Shifting travel : 140 [mm] - Angular travel of hob-holding headstock : -45/+115 [°] - Machine floor space : 2700/2180 [mm] - Machine height : 2310 [mm] - Machine weight : 4800 [kg] EQUIPMENT Nodpj Ad Rwcofx Ah Sedc - CNC : Siemens 840D PowerLine - Loading manipulator

Condition: used, total height: 1,900 mm, total width: 2,200 mm, total length: 1,500 mm, Year of manufacture: 1959 Colour: Blue Empty weight: 2.500 kg Price: On request - Year: 1959 - Documentation available: Yes Nodpjzkui Sjfx Ah Sodc - Serial number: 80 - Drive system: Conventional - Power [kW]: 5.0 - Transport dimensions: 1500mm x 2200mm x 1900mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2023, max. wheel diameter 200 mm gear width 60 mm max. module 5 min. module 2 workpiece weight max. 6,0 kg total power requirement 4 kVA weight of the machine ca. 0,5 t dimensions 1,35 x 1,55 x 1,7 m Ndjdpfszy Satsx Ah Soc Less used Gear deburing machine - 3-jaw chuck ZG 125 - One twist in 5- 120 sec. - After test maybe modil 1,25 possible - Working Unit 1, milling function - Working Unit 2, brush function - dust collector - automatic mode

Condition: excellent (used), functionality: fully functional, Various accessories for a Reishauer NRK thread grinding machine Original – change gear box with stand, containing 50 ground change gears in the original wooden box 26 loose change gears, including 2x Z=63, 2x Z=64, and 1x Z=72, original Njdpfx Ajza Dk Ssh Sedc all gears with ground teeth Grinding machine accessories: 2 adjustable steady rests 66189-2 + 66189-3 / setting blocks (1x incomplete) 9 new grinding wheel flanges various new and unused grinding wheels Balancing mandrel Thread rolling device, including rolling device and lead curve Roller grinding device various cam disks/cam curves Grinding device, manufacturer Landert Motoren various oil nozzles unused strip curtain/splash guard Price / details on request All technical specifications are subject to printing errors and changes. We only sell to countries within the European Community.

Condition: used, Profiling milling machine with 2 profiling spindles, hardware milling unit, and sanding unit Technical data and equipment 1. Power supply and compressed air * Electrical connection: 3-phase, 380 V, 50 Hz * Compressed air requirement: approx. 13 NL/min * Operating pressure: 8 bar * Compressed air quality: according to Pneurop 6611 2. Profiling spindle 1 * Spindle arrangement: right * Drive power: 11 kW * Speed: 7,000 RPM * Direction of rotation: clockwise and counterclockwise * Spindle diameter: 40 mm * Effective length: 252 mm * Max. tool diameter: 230 mm Vertical positioning: * U-shaped movement of the profiling spindle * Pneumatic cylinder with 120 mm stroke * 2 tool positions * Position detection via limit switches Horizontal positioning: * Pneumatic forward and backward movement * Position detection via limit switches * Automatic plunge function with adjustable plunge speed for tear-free milling * Protective and extraction hood with extraction nozzle Ø 140 mm 3. Profiling spindle 2 Nsdpfxjz S Nrps Ah Ssdc * Spindle arrangement: right * Drive power: 11 kW * Speed: 7,000 RPM * Direction of rotation: counterclockwise * Spindle diameter: 50 mm * Effective length: 272 mm * Max. tool diameter: 230 mm Vertical positioning: * U-shaped movement of the profiling spindle * Pneumatic cylinder with 90 mm stroke * 3 tool positions * Position detection via limit switches Horizontal positioning: * Pneumatic forward and backward movement * Position detection via limit switches * Protective and extraction hood with extraction nozzle Ø 140 mm 4. Hardware milling unit EG * Spindle arrangement: right * Drive: Three-phase motor, 3 kW * Speed: 6,000 RPM * Spindle diameter: 30 mm * Effective length: 47 mm Positioning: * Vertical positioning: not available * Horizontal positioning: pneumatic forward and backward movement * Position detection via limit switch (rear position) * Protective and extraction hood with extraction nozzle Ø 80 mm 5. Stop system * 1. Stop in front of profiling spindle 1: * Manual chip removal * Quick adjustment via parallelogram guide * 2. Stop between profiling spindle 1 and 2: * Pneumatically adjustable chip removal * 3. Stop behind profiling spindle 2: * Fixed stop 6. Sanding unit * Sanding unit with automatic infeed and outfeed 7. Feed device * Roller spacing (center to center): 130 mm * Roller diameter: 110 mm * Roller width: 50 mm * Feed device can be swiveled away * Pneumatic control of the working stroke 8. Support rail for edge milling * Rail length: approx. 3,000 mm * Adjustment range forward: approx. 100–600 mm