Used toggle presses for sale (48)

Condition: used, Pneumatic toggle press, pneumatic press SCHMIDT Type 34-12 Manufacturer No. 400160-03 Serial No. 0028 Year of manufacture 2008 Pressing force 28 kN = 2.8 tons. Throat 130 mm Ram surface 63 x 36 mm Fgolhcdov Srfkew Ioi Ram stroke 12 mm Clamping pin bore Ø 20 mm with clamping screw Compressed air requirement 2 to 6 bar - Stroke length continuously adjustable via a fixed stop for the upper stroke end position - Fine adjustment for the lower stroke end position with a scale of 1 graduation = 0.05 mm - Stroke triggered via pneumatic valve, triggered by material insertion - 45° press stand made of special aluminum construction - Press tool made of special construction for 3 x Ø 2.5 mm punch holes - Complete unit mounted on an aluminum base plate 600 x 600 x 20 mm Space required L x W x H 720 x 600 x 600 mm Weight 68 kg Very good condition

Condition: used, Year of construction: 1994, pressure 600 t stroke 100 mm no. of strokes 45 /min distance between columns 580 mm Felhcdew U Ekpow Iegi dayligth 460 mm table surface area 550 x 620 mm ram surface 550 x 430 mm ram adjustment 50 mm power requirement 15,0 kW Weight 13,5 t dimensions (WxDxH) 1,5 x 2,45 x 2,75 m Nominal force travel 1.7 mm Nominal energy 10.2 kJ With knuckle-joint drive, flywheel brake, hydraulic clutch, press frame balancing, self-monitoring control system

Condition: like new (used), functionality: fully functional, Ram stroke 5 mm Throat depth 170 mm Table 340 x 270 mm Felhcdsxvprxjw Iegi Head height adjustable by 200 mm 6 bar

Condition: excellent (used), pressing force: 5 t, I sell a Schling DUO 5T pneumatic press. Folhjudph Uscdw Isgi

Condition: like new (used), Year of construction: 1997, Manufacturer: INVERNIZZI Model: GNT2 Year: 1997 Fslexnx Exehcdw Ijgi Condition: New Stock number: 0387 Press force: 1,000 t Number of pressure points: 2 Ram stroke: 150 mm Ram adjustment: 20 mm with wedges Strokes per minute: 12–55 Die height from die holder (cbra): 800 mm Sheet passage in frame: 660 mm

Condition: new, pressure 8,0 kN stroke 40 mm Fgolhjfv Avkjcdw Iji throat 90 mm Working height from to 50 - 200 mm table surface area 120 x 160 mm weight of the machine ca. 22 Kg dimensions 160 x 230 x410 mm Knee lever hand press with fine height adjustment SPECIAL PRICE!!! • Working height adjustable by simply loosening the clamping screws on the stand • Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring

Condition: used, Year of construction: 2004, functionality: fully functional, total height: 375 mm, throat depth: 65 mm, total width: 110 mm, total length: 185 mm, table width: 105 mm, table length: 80 mm, overall weight: 11 kg, drop-through hole in table: 20 mm, space requirement length: 185 mm, space requirement width: 110 mm, stroke length: 35 mm, Toggle Press Manufacturer: SCHMIDT Technology GmbH Model: 13F-35 Year of manufacture: 2004 Rated force: 5 kN With fine height adjustment via micrometer scale Working height: 35 - 155 mm Stroke: 35 mm Throat depth: 65 mm Table size: 105 x 80 mm Ram bore: Ø 10H7 Table bore: Ø 20H7 Frame height: 375 mm Base area: 110 x 185 mm Folexu Uw Dshcdw Iogi Weight: 11.1 kg

Condition: used, Year of construction: 1988, pressure 100 t distance between columns 1180 mm stroke 1 - 120 mm no. of strokes 90 /min distance table/ram, stroke up 470 mm table surface area 1100 x 700 mm table height over floor 800 mm side window 400 mm ram surface 740 x 350 mm ram adjustment 100 mm power requirement 37,0 kW weight 11,0 t dimensions (WxDxH) 2,3 x 2,0 x 3,5 m difference-way press with hydraulic driven knuckle-joint system, controllable dependent on pressure and way, two-hand operation Fjlhcdsvzxtasw Ijgi No foundation pit necessary as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request T-slots in table and ram according to customer's specification - price on request

Condition: used, Pneumatic toggle press BURGER type D04 No. 4497 Year of construction approx. 1972 Compressive force max. 6 ton. Projection 150 mm ram stroke 39 mm Table size 340 x 270 mm Drop-through opening Ø 46 mm Installation height max. 160 mm Tool holder Ø 25 mm Folhcovcdvpodw Ijgi ram plate Ø 90 mm Pneumatic operating pressure 5 bar Mains connection 220 V 50 Hz - Pressure regulator for press force adjustment - stroke height adjustment 7, 21, 40 mm - electric foot switch - Table height adjustment Space requirement L x W x H 700 x 500 x 1300 mm Weight 240 kg good condition

Condition: used, Nominal force: 1000 ton (≈10,000 kN). ​Slide (ram) stroke: 170 mm. Number of single strokes per minute, not less than: 32 spm Permissible number of double strokes per minute: 18 spm Distance between table and slide at bottom position: 630 mm Adjustment range of distance between table and slide: 16 mm. ​Table size (bolster): 1000 × 800 mm Hole diameter in the slide: 80 mm. Bolster (sub-plate) thickness: 160 mm. Bottom ejector stroke, not less than: 100 mm. Bottom ejector force: 320 kN Bottom ejector position adjustment range: 25 mm. Top ejector stroke (in slide): 15 mm. Top ejector force (in slide), not less than: 100 kN. Main drive motor power: 40 kW; speed: 930 rpm. Fslexqq E Ashcdw Iegi Height of press above floor level: 3,470 mm. Overall height: 3,620 mm. Overall dimensions, mm: front to back 2,030; left to right 1,950. Net weight without foundation: 25637 kg.

Condition: excellent (used), Year of construction: 1992, Manufacturer: Woronez TMP Year: 1992 Model and configuration: KB8044 / 2500 ton Nominal force: 2500 tons Fgolhexlh Ttocdw Ioi Slide stroke: 190 mm Number of strokes: 14-20 Closed die height: 560 mm Slide adjustment: 15 Table dimensions: 1530 x 1530 mm Distance between uprights: 1600 mm Main motor: 77 kW, 380 V Overall dimensions: 4920 x 3340 x 5980 mm Weight: 125 tons.

Condition: new, pressure 34,0 kN stroke 40 mm throat 130 mm Working height from to 80 - 240 mm table surface area 190 x 140 mm spindle diameter 30 mm weight of the machine ca. 80 Kg dimensions 375 x 200 mm Toggle pneumatic presses incl. working height fine adjustment via bevel gear with lateral crank comfortable and easily adjustable. Fgolhcsfv Avyjdw Iji Toggle lever pneumatic presses are to be used when the maximum pressure is required shortly before the end of the stroke, e.g. when assembling, punching, embossing, caulking, etc.

Condition: used, pression: 1,2 kg Fgeljdbmpmjhcdw Ioi table size: 110 x 150 mm clearance hole in the die: 20 mm throat: 86 mm max. distance between table and tappet: 80/210 mm tappet stroke: 30 mm space needed: 240 x 150 x 510 mm weight: 21 kg

Condition: used, Year of construction: 1988, pressure 100 t distance between columns 1180 mm stroke 3 - 120 mm no. of strokes - 95 /min distance table/ram, stroke up 500 mm table surface area 1100 x 700 mm Hole in the table 220 x 100 mm table height over floor 800 mm side window 400 mm ram surface 750 x350 mm ram adjustment 100 mm Oil volume 1300 l power requirement 42,0 kW weight 10,0 t dimensions (WxDxH) 1,8 x 1,8 x 3,55 m permitted for manual put-in according to the German Safety Regulations (UVV) Felhcjvut Tzjdw Isgi with hydraulic driven knuckle-joint system, controllable dependent on pressure and way, two-hand operation with electro-hydraulic roll feed no foundation pit necessary Option additionally: decoiler Fecker (price on request) can be offered with or without putting into operation - video at seller's site before dismantling available

Condition: used, Year of construction: 1992, Mechanical knuckle-joint press VORONEZH 2500 ton for sale. The press is in good working condition Manufacturer: VORONEZH TMP Year: 1984 Model and configuration: KB8044 / 2500 ton Nominal force: 2500 tons Ram stroke: 190 mm Stroke rate: 14–20 strokes per minute Shut height: 560 mm Ram adjustment: 15 mm Fgelhcexbtclsdw Ioi Table dimensions: 1530 x 1530 mm Main motor: 77 kW, 380 V Overall dimensions: 4920 x 3340 x 5980 mm Weight: 125 tons

Condition: new, pressure 1,5 kN stroke 40 mm throat 70 mm Working height from to 75 - 170 mm table surface area 115 x 70 mm weight of the machine ca. 11 Kg dimensions 115 x 175 x 290 mm Fslefv Av Dshcdw Iogi Hand presses with rack HZ 150 The power is transmitted via a rack and pinion construction. she finds their use where during the working process a constant pressure is needed. Precisely manufactured, spindle hardened and ground, unlimited service life Long spindle guide, optimal pressure performance, T-slot according to DIN 650 milled in the middle, sliding blocks fit exactly.

Year of construction: 1993, condition: used, machine/vehicle number: P 285, pression: 800 kN Fgelhcds N D Anjw Ioi table size: 600 x 900 mm space needed: 1150 x 1900 x 2700 mm weight: 6000 kg

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Fslhovuuknocdw Iegi Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: new, pressure 500 kN stroke 40 mm throat 73 mm Working height from to 60 - 150 mm table surface area 115 x 70 mm weight of the machine ca. 10 Kg Fgelhcsf Nb Exedw Isi .Toggle lever hand press SPECIAL OFFER!!! • Working height adjustable by simply loosening the clamping screws on the stand • Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring

Condition: used, Year of construction: 1997, pressure 1000 t distance between columns 1260 mm stroke 315 mm no. of strokes 10, 21 - 42 /min distance table/ram, max. stroke up, adjustment up 1295 mm table surface area 1250 x 800 mm table height over floor 670 mm side window 830 mm capacity of ejector in table 63 t ejector stroke of ejector in table 75 mm capacity of ejector in ram 16 t stroke of ejector in ram 23 mm ram surface 1250 x 800 mm ram adjustment 20 mm feeding length transfer 0 - 250 mm closing travel of each rail programmable 0 - 140 mm no. of strokes of the transfer 42 /min power requirement 135,0 kW weight 120,0 t Dimensions (WxDxH) 5,9 x 4,8 x 7,95 m Fgjlsvuukushcdw Ioi height above floor 6,95 m height beneath floor 1,0 m with DC drive, pneumatic clutch, motoric ram adjustment, pneumatic counterbalance in ram, mechanical ejector in table (pneumatically controlled), mechanical ejector in ram, ram interlocking, die clamping system in table and ram, motoric oil circular lubrication, grease lubrication control of the press: Siemens S 5 - CNC 2-Achs-Transfer (Fabrikat Dreher, Type STV-D Modell 350/100-SO, Bj. 2008), Steuerung Siemens S 7 - cleaning system (make Beyss, yom. 1989) as is where is, WITHOUT putting into operation, stored in dismantled condition The press was previously installed in a soundproof enclosure, which is not part of the scope of delivery Video at seller's site before dismantling available

Condition: new, pressure 17,0 kN stroke 40 mm throat 110 mm Working height from to 70 - 220 mm table surface area 190 x 140 mm spindle diameter 30 mm weight of the machine ca. 60 Kg dimensions 310 x 190 mm Fslhcdefv Avvow Iogi Toggle pneumatic presses incl. working height fine adjustment via bevel gear with lateral crank comfortable and easily adjustable. Toggle lever pneumatic presses are to be used when the maximum pressure is required shortly before the end of the stroke, e.g. when assembling, punching, embossing, caulking, etc.

Condition: used, Year of construction: 2003, pressure 400 t distance between columns 1060 mm stroke 450 mm no. of strokes 15 - 30 /min distance table/ram, max. stroke up, adjustment up 1160 mm table surface area 1000 x 700 mm capacity of ejector in table 2 x 16 t ejector stroke of ejector in table 125 mm Die cushion pressure in table 120 t Die cushion stroke in table 2 mm capacity of ejector in ram 2 x 4 t stroke of ejector in ram 100 mm ram surface 1000 x 700 mm column travel -side 630 mm power capacity 55,0 kW weight 50,0 t year of manufacture 1986 - overhaul 2003 multi-station press Felhcdwjvzxpue Iegi with automatic parts feed, Transfer, drawing cushion in table (2. stage) as is where is, WITHOUT putting into operation, stored in dismantled condition

Condition: new, pressure 17,0 kN stroke 60 mm throat 105 mm Working height from to 75 -180 mm table surface area 170 x 130 mm spindle diameter 25 mm weight of the machine ca. 35 Kg dimensions 260 x 130 x415 mm Knee lever hand presses SPECIAL PRICE!!! HK 1700 stroke 60 mm with crank with fine adjustment of working height Fgelhsfv Avnecdw Iei Stand height 450 mm Even more pressure in production without additional effort. Maximum pressure performance shortly before the end of the stroke thanks to toggle lever technology. Particularly stable construction of the spindle head and column

Condition: new, pressure 26,0 kN stroke 60 mm throat 110 mm Working height from to 70 - 250 mm table surface area 190 x 140 mm spindle diameter 30 mm weight of the machine ca. 46 Kg dimensions 310 x 140 x 475 mm Fgslofv Avrshcdw Ioi Knee lever hand presses SPECIAL PRICE!!! HK 2600 stroke 60 mm, incl. working height fine adjustment via bevel gear with comfortable and easy to adjust with a side crank. Stand height 475 mm Even more pressure in production without additional effort. Maximum pressure performance shortly before the end of the stroke thanks to toggle lever technology. Particularly stable construction of the spindle head and column

Condition: new, pressure 2,5 kN stroke 45 mm throat 90 mm Working height from to 80 - 220 mm table surface area 120 x 60 mm weight of the machine ca. 22 Kg dimensions 160 x 230 x 390 mm Hand presses with rack HZ 250 The power is transmitted via a rack and pinion construction. she finds Folefv Av Ijhcdw Iogi their use where during the working process a constant pressure is needed. Precisely manufactured, spindle hardened and ground, unlimited service life Long spindle guide, optimal pressure performance, T-slot according to DIN 650 milled in the middle, sliding blocks fit exactly.