Used Arp Ez 100 for sale (26,203)

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 98 EZ100/2675, overall weight: 4,000 kg, number of blades: 68, total length: 2,800 mm, total height: 2,500 mm, control cabinet length: 500 mm, control cabinet width: 500 mm, control cabinet height: 1,000 mm, total width: 2,000 mm, rotor length: 1,000 mm, power: 30 kW (40.79 HP), type of input current: three-phase, year of last overhaul: 2025, working width: 1,000 mm, sieve perforation: 15 mm, For sale is an ARP single-shaft shredder type EZ 100 in operational condition, ideally suited for applications in the recycling industry, plastics processing, wood preparation, as well as for industrial size reduction processes. The machine is equipped with a hydraulic feed system for consistent material intake and a robust cutting system for continuous operation. Hodpeyiuv Djfx Andenu

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Hnodpfxou Rwa Ij Andsu Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 2975/1999, functionality: fully functional, operating hours: 20,637 h, power: 48 kW (65.26 HP), input voltage: 400 V, pressing force: 100 t, stroke length: 820 mm, operating speed: 470 mm/s, reverse speed: 447 mm/s, table width: 1,000 mm, table length: 720 mm, table height: 950 mm, ram plate width: 800 mm, ram plate length: 600 mm, distance table to ram: 910 mm, oil tank capacity: 2,100 l, total length: 3,100 mm, total width: 2,300 mm, total height: 4,850 mm, overall weight: 17,800 kg, Equipment: CE marking, documentation/manual, safety light barrier, The machine was used in single-shift operation for prototype production, with CNC 50 control, impact damping, drawing cushion force of 400 kN, stroke of 150 mm, drawing cushion area of 600x550 mm, and regular UVV inspections. Includes a light curtain and a mechanically adjustable depth stop. Features hydraulic die clamping. Hodszkrl Dspfx Andjnu Dismantling and transport are not included in the price.

Condition: excellent (used), For sale: a professional pneumatic-hydraulic press by Mäder with a maximum pressing force of 100 kN (approximately 10 tons). The machine is designed for industrial applications, including pressing, assembly, stamping, crimping, straightening, and other workshop and production tasks. The press utilizes compressed air and a pneumatic-hydraulic system. It is equipped with foot pedal control for easy operation during work. Hnsdpfx Asz Snrnjndou Technical specifications: Manufacturer: Mäder Type: pneumatic-hydraulic press Pressing force: 100 kN / approx. 10 tons Operating pressure: 6 bar Total stroke: 50 mm Hydraulic stroke: 5 or 10 mm – depending on the version Frame overhang: approx. 300 mm Maximum working clearance: approx. 200–270 mm, adjustable Work table dimensions: approx. 310 × 220 mm T-slot width: 16 mm Mounting hole in the ram: Ø20 H7 × 34 mm deep Ram diameter: Ø40 mm Weight of the press itself: approx. 311 kg Working medium: filtered compressed air Noise level: below 75 dB Control: foot pedal The machine is sold with the table shown in the pictures.

Condition: excellent (used), Year of construction: 2021, 2021 Morgan Rushworth XPE CNC 3100/100 CNC Pressbrake With ESA Bend CNC Touch Screen Controller Hedpfx Anoz H U Ukedonu Bending Power 100 Tonne. Bending Length 3,100mm. 'Y' Axis Approach Speed 75mm/sec. 'Y' Axis Bending Speed 10mm/sec. 'Y' Axis Return Speed 75mm/sec. 'X' Axis Travel 750mm. 'R' Axis Travel 160mm. Stroke 240mm. Daylight 505mm. Motor Power (2) 5.5kW. Nominal Power (Excluding Options) 21kW. With 2 Back Gauge Fingers, 2 Sheet Support Arms & Foot Switch. S/No. B28015 (2021). Overall Dimensions L4,350 x W2,040 x H2,515mm. Weight 5,900mm.

Condition: used, Model - CR1100D Hnedjwf Hbrspfx Andeu Max. Width of planing - 1100 mml Min. Thickness of planing - 8 mm Max. Thickness of planing - 150 mm Min. Length of planing - 435 mm Bottom spindle speed - 4500 RPM Electric power - 75 kW Feed drive motor - 5 HP Pressure roller elevation motor - 2 HP| Dust hood outlet dimensions - O125 mm x 1, 200 mm x 4 Cutter-head diameter - 150 mm Air pressure - 4~6 kg/cm Table height from floor - 990mm Machine dimensions (L x W x H) - 2800x2150x2000 Net weight (Approx) - 4600 kgs Gross weight (Approx) - 4950 kgs

Condition: good (used), • Model – FMF 100 • Double-sided drilling machine • Min. diameter: 3 mm • Max. diameter: 300 mm Hjdpfsuqma Ajx Andjnu • Speed: 110 – 4600 rpm • Lower drill with automatic feed, upper drill guided manually

Condition: excellent (used), For sale: a robust horizontal milling machine from the renowned manufacturer VEB Heckert Auerbach (GDR), model FW 250x1000. The machine is in very good condition, complete, and fully functional – ready for operation. ✔ Technical specifications: • Model: FW 250x1000 • Year of manufacture: 1979 • Manufacturer: VEB Werkzeugmaschinenfabrik Auerbach, Kombinat “Fritz Heckert” • Weight: approx. 1,700 kg • Work table: 250 × 1000 mm, T-slots • Spindle speed range: 630 – 1800 rpm • Power supply: 3x380 V / 50 Hz • Power: 5.8 kW • Control voltage: 220 V • Rated current: 16 A, fuse 25 A • Mechanical and automatic feeds in all axes ✔ Equipment: • Robust machine vice on the table • Work light • Cooling system • Complete control panel with adjustment wheels and feeds ✔ Advantages: • Very stable, heavy-duty construction (1.7 tons) – ideal for precise and repeatable machining • Renowned manufacturer – Heckert (GDR), known for its durable machines • Fully functional and complete – ready for immediate use • 1000 mm table – allows for machining of larger parts This machine is reliable; it is not a lightweight, cheaply made Chinese product – it is a classic from a time when equipment was built to last. Hjdpfez Slfmjx Andonu

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 640 mm, controller model: SIEMENS 840 D, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,100 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 640 mm Number of pallets: 2 Table size: 2 × 1,000 × 450 mm Table load capacity: 600 kg Spindle speed range: 50–10,000 rpm Drive power: 18.5 kW Tool interface: DIN 69871 / ISO 40 Feed rate range X/Y/Z: up to 10,000 mm/min Rapid traverse rate in all axes: 30 m/min MACHINE DETAILS CNC path control: SIEMENS 840 D Number of tool positions: 30 Machine dimensions & weight Machine dimensions L × W × H: approx. 3,605 × 3,041 × 3,220 mm Machine weight: approx. 6,700 kg EQUIPMENT 2-position pallet changer 30-position tool changer Internal coolant supply (ICS) Full enclosure with electrically interlocked safety doors Linear guides with double roller recirculating bearing for even absorption of high torques in all directions Hnedpoz Ibb Tjfx Andju Ball screws in all 3 axes Machine bed made of Meehanite cast iron for high precision, rigidity, and vibration damping Swivel chip conveyor with integrated coolant system Preparation for 4th axis CE compliant

Condition: excellent (used), Year of construction: 2024, For sale: Professional water treatment and preparation unit – UWS Heaty Profiline 100 No 2. This is a mobile device designed for use in heating systems, water installations, and HVAC service. Perfect for flushing, filling, and treating installations. Equipment is in excellent technical condition, fully complete and ready for operation. ⚙️ Technical data: Hedpfxjz Smqdj Andsnu Manufacturer: UWS Technologie GmbH Model: Heaty Profiline 100 No 2 Year of manufacture: 2024 Power supply: 230 V / 50–60 Hz Power: 0.5 kW Weight: approx. 59 kg Max. operating temperature: 80°C Max. pressure: 6 bar 🔧 Equipment features: - Integrated tank - High-quality EBARA pump - Flow meters - Pressure gauges - Control valves - Mobile transport trolley - Documentation and accessories (as seen in the photos) 🔍 Condition: - Used device - Very good technical condition - Minor, normal signs of use - Fully complete ⚠️ Remarks: - One pressure gauge has a damaged housing/cover (visible in the photos) - Operation of this pressure gauge has not been checked - The part can be easily replaced if needed 📦 Applications: - Heating installations - Water installations - Service and cleaning of installations - HVAC systems 🚚 Delivery: - Pallet shipping available - Collection in person possible

Condition: good (used), Year of construction: 2004, We are selling a used system of recycling machines with the following components (year of manufacture 2004): - Chip crusher type RS 300 E with coarse parts outlet (Steimel) - Scraper belt conveyor with torque switch-off (DGS) - Chip centrifuge AZ - 250 with feed hopper (ARP) - Vacuum lock VSS 100 (ARP) - Pump sump (ARP) - Vibrating sieve - Switch cabinet The system is fully functional and ready for collection Hjdpfxori N D Ij Andjnu

Condition: used, each with 32 stations with divider plate suitable for 64 blocks : - dimensions 1 full block per station -> ± 1070 mm x 530 mm - dimensions 2 blocks per station -> ± 535 mm x 530 mm max. thickness blocks 100 mm suitable for cooling with ammonia or freon (not included) dimensions (l x w x h) : ± 4.710 x 1.600 x 1.120 mm Hjdjzxrkvjpfx Andjnu 32 blocks weighing ± 26 kg or 64 blocks weighing ± 13 kg ± 1.664 kg / Cycle (2h30)

Condition: used, Year of construction: 1983, pressure 100 t throat 375 mm stroke 20-125 mm no. of strokes 60 Hub/min ram - range of adjustment 80 mm table surface area 920x660 mm ram surface 700x450 mm hole in the table Ø90 mm tool hole in ram Ø50 mm weight of the machine ca. 8 t dimensions of the machine ca. 2100x1500x3300 m Hsdpfx Anjxh Swhedenu

Condition: excellent (used), Electrically controlled infeed magazine for planing machines For sale is an electrically controlled infeed magazine for continuous and uninterrupted feeding of planing machines. Technical features: * Automatic adjustment of the feed rate to the planing machine * Feed rate of up to 60 m/min * Adjustable feed force, adapted to the respective workpiece size * Continuous and uniform feeding * Front section can be folded down for better accessibility and convenient operation * Robust design for professional use The infeed magazine is ideal for continuous operation and efficient material feeding to planing machines. Hjdpfx Aoz Dpvdendjnu

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals Hnjdpsz Slltjfx Andsu • Weight: 65 kg

Condition: used, Year of construction: 2016, operating hours: 5,215 h, load capacity: 10,000 kg, fuel type: electric, battery voltage: 48 V, front tire type: superelastic tires (non-marking), overall weight: 2,040 kg, total height: 2,150 mm, total length: 2,035 mm, total width: 9,960 mm, color: yellow, Jungheinrich EZS 5100 XL Tow Tractor, Year of Manufacture 2016 Specifications: Jungheinrich EZS 5100 XL Year of Manufacture: 2016 Recorded Operating Hours: 5,215 h Load Capacity: 10,000 kg Net Weight: 2,040 kg Hodoyzrz Aopfx Andenu Front Tyres: Super-elastic Rear Tyres: Super-elastic Battery Year: 2016 Battery Capacity: 625 Ah Battery Voltage: 48 V Equipment: Half cab (front, roof, and rear windows) Front windshield wiper Road approval (StVZO), indicators, etc. Warning beacon Trailer coupling Remarks: Drive motor power: 4.5 kW Towing capacity: 10,000 kg 1,800 N at 5', 7,500 N at 60' Dimensions (L x W x H): 2,035 x 996 x 2,150 mm

Condition: good (used), Technical specifications for the pallet rack upright: Racking system: Bito Type: PRO Included in delivery: 01x pallet rack upright, used Material finish: Sendzimir galvanized Frame profile: P5 Profile dimensions: P 100 x 76 x 2.25 mm Including horizontal and diagonal braces, base plates, and upright protectors The uprights are pre-assembled (bolted lattice construction) Height: 12,400 mm Hsdpex Hz Dwefx Andjnu Depth: 1,100 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipping of this item will incur extra costs, which can be quoted separately depending on delivery location and scope.

Condition: used, Double-column hydraulic press SCHÖN, type UTE 100 Special Special press with additional side press cylinders – vertical and horizontal, each with 100 tons capacity. Machine no. 1800, year of construction 1977 Rebuilt according to UVV standards in 09/1991 by Livenbrück Vertical pressure force: 100 tons Vertical ram stroke: 150 mm Vertical installation height: 375 mm (400 mm) Horizontal pressure force: 100 tons Horizontal ram stroke: 60 mm Horizontal installation width: 600 mm Table surface: 600 x 480 mm Table opening: Ø 100 mm Ram surface: Ø 200 mm (vertical and horizontal) Piston rod: Ø approx. 240 mm (vertical and horizontal) Clamping pin bore: Ø 50 mm Ram stroke: 150 mm Installation height: max. 435 mm Table height above floor: 820 mm Oil tank capacity: approx. 375 liters Motor power: 15 kW Mains connection: 400 volts, 50 Hz - Column guidance via the large piston with anti-rotation device - Stepless press force adjustment - Adjustable pressure holding time for vertical and horizontal - Switching for working movement: vertical only or combined vertical and horizontal - 2-hand operation for stroke release - Control cabinet located on the side, fixed to the machine - Light curtain SICK, type LVU 306, for safety operation Space required for the press L x W x H: 2050 x 1550 x 2230 mm Weight: approx. 5 tons Hnodpjz A R Irefx Andou Good condition

Condition: used, functionality: fully functional, This used Jungheinrich MPB pallet racking system is a compact, high-performance heavy-duty racking system for industrial storage requirements. The modular high-bay racking system is ideal for logistics, industry, large warehouses, and freight forwarding companies. With a shelf load of 2,000 kg per level and a bay load of 6,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. The offered pallet racking system has a total of 432 pallet spaces, including ground-level spaces. At a total price of €9,870.00 net, this corresponds to a price of only €22.85 net per pallet space. PRODUCT DETAILS: - Height: approx. 520 cm - Depth: approx. 110 cm - Length: approx. 100.00 m - Shelf load: 2,000 kg per level - Bay load: 6,000 kg - Beams: approx. 360 × 12 × 5 cm - Beam color: yellow, painted - Uprights: approx. 520 × 110 cm, pre-assembled - Upright color: blue, painted - Levels: ground level + 3 beam levels - Pallet spaces: 432, including ground-level spaces - Price per pallet space: €22.85 net - Condition: Used, Jungheinrich MPB SCOPE OF DELIVERY: - 28 × Uprights, approx. 520 × 110 cm, pre-assembled - 162 × Beams, approx. 360 × 12 × 5 cm - 324 × Safety pins PRICE: €9,870.00 net €11,745.30 gross You will receive an invoice with VAT shown. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams, optional - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers is also possible PLANNING & CONSULTATION: Our planning department will gladly prepare a non-binding offer for you – tailored to your specific requirements. Whether it's a new installation, renovation, or expansion – we will provide you with competent advice regarding your racking configuration. SHOWROOM: Feel free to visit us in our showroom! You can get a comprehensive overview of our pallet racking systems, shelving systems, and other solutions on-site. Many systems are set up and can be experienced directly. Our technical consultants are available to answer your questions and provide individual advice – we look forward to your visit! HAVEN'T FOUND THE RIGHT ONE YET? Visit our website. Here you will find a quick overview of many more offers and models. Hnsdpfx Anjz Sq Ryedou ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us via message or phone call. You will find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday from 08:00 to 16:00. Alternatively, you can send us a message with your name and telephone number. We will get back to you as soon as possible.

Condition: good (used), Year of construction: 2014, machine/vehicle number: 59 526 05 221 0010, functionality: fully functional, operating hours: 1,000 h, power: 20 kW (27.19 HP), input voltage: 380 V, input current: 33 A, type of input current: three-phase, temperature: 650 °C, inner dimension length: 1,000 mm, inner dimension width: 600 mm, inner dimension height: 600 mm, total length: 1,800 mm, total width: 1,600 mm, total height: 1,900 mm, overall weight: 350 kg, number of chambers: 1, control type: manual, actuation type: electric, fuel type: electric, Equipment: CE marking, Hardening furnace Vötsch VAW 60/100, in good condition. For sale due to business closure. Very reliable furnace; the temperature difference in the combustion chamber at 500°C is +/- 15°C. The furnace was operated at a maximum temperature of 500°C during production. The door seal is in good condition. The new price was EUR 38,000. Hjdpfez Rnwhjx Andonu

Condition: used, each with 24 stations with divider plate suitable for 48 blocks : - dimensions 1 full block per station -> ± 1.056 mm x 530 mm - dimensions 2 blocks per station -> ± 528 mm x 530 mm max. thickness blocks 100 mm suitable for cooling with ammonia or freon (not included) dimensions (l x w x h) : ± 3.319 x 1.600 x 1.120 mm Hjdpfx Anozxrmdsdenu 24 blocks weighing ± 26 kg or 48 blocks weighing ± 13 kg ± 1.248 kg / Cycle (2h30)

Condition: excellent (used), For sale is a Karl Süss HR 100 Analyse – a high-end, manual measurement and testing station designed for the analysis and contacting of semiconductor wafers and microelectronic components. The device is used in laboratories, research and development departments, and during scientific research. The station is equipped with a precise measurement table with fine adjustment, a sample holder with a vacuum function, and a mechanical lifting mechanism. It also has connections for compressed air and vacuum, which ensures stable mounting of the components being tested during measurements. Technical data: Manufacturer: Karl Süss Model: HR 100 Analyse Hedpfx Asz Sndxondonu Device type: manual testing station (Wafer Probe Station) Application: analysis and testing of semiconductor wafers and microelectronic components Vacuum function for sample mounting Precise measurement table Connections for compressed air and vacuum Condition: used, as shown in the pictures.

Condition: excellent (used), functionality: fully functional, clear span: 2,700 mm, total height: 10,050 mm, load per truss pair (max.): 2,000 kg, load capacity per storage section: 10,000 kg, number of shelf rows: 5, overall weight: 14,500 kg, This used Jungheinrich MPB pallet racking system is a high-performance, heavy-duty racking solution for industrial storage requirements. The modular high-bay racking system is ideal for logistics, industry, large warehouses, and freight forwarding companies. With a load capacity of 2,000 kg per level and a bay load capacity of 10,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. The pallet racking system on offer has a total of 648 pallet spaces, including spaces on the floor level. At a total price of €14,240.00 net, this corresponds to a price of only €21.97 net per pallet space. Hedpfsz Sq Sqsx Andenu PRODUCT DETAILS: - Height: approx. 1,050 cm - Depth: approx. 110 cm - Length: approx. 100.00 m - Level load: 2,000 kg per level - Bay load: 10,000 kg - Beams: approx. 360 × 12 × 5 cm - Beam color: yellow, painted - Uprights: approx. 1,050 × 110 cm, pre-assembled - Upright color: blue, painted - Levels: Floor + 5 beam levels - Pallet spaces: 648 including floor spaces - Price per pallet space: €21.97 net - Condition: Used, Jungheinrich MPB SCOPE OF DELIVERY: - 28 × Uprights, approx. 1,050 × 110 cm, pre-assembled - 270 × Beams, approx. 360 × 12 × 5 cm - 540 × Locking pins PRICE: €14,240.00 net €16,945.60 gross You will receive an invoice with VAT shown. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery by our partner logistics company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams optionally available - Racking inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers is also possible PLANNING & CONSULTING: Our planning department will gladly prepare a non-binding offer for you – tailored to your specific requirements. Whether it's a new installation, a renovation, or an extension – we will provide you with expert advice on your racking configuration. SHOWROOM: Feel free to visit us in our showroom! You can get a comprehensive overview of our pallet racking systems, storage racking systems, and other solutions. Many systems are set up and can be experienced directly. Our specialist consultants will be happy to answer your questions and provide individual advice – we look forward to your visit! HAVEN'T FOUND THE RIGHT ONE YET? Visit our website. Here you will find a quick overview of many other offers and models. ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us via message or phone. You can find our phone number on our company website. ☎️ You can reach us by phone from Monday to Friday from 08:00 to 16:00. Alternatively, you can send us a message with your name and telephone number. We will get back to you as soon as possible.

Condition: excellent (used), Year of construction: 2017, REF: MM6171 1 X Audion CS-Matic 100 shrink wrapper. The Audion CS-Matic 100 offers flexibility for diverse product sizes. Its continuous side-seal system  accommodates a wide range of heights and widths, alongside unlimited product lengths. Smart integrated sensors automatically determine the perfect bag size, while the adjustable, PTFE-coated seal bar ensures high-speed packaging, achieving up to 4200 pristine packs per hour. Technical specification: ⚙️ Manufacturer - Audion Packaging Machines ⚙️ Model - CS-Matic 100 ⚙️ Year of manufacture - 2017 ⚙️ Power - AC Input 380-415V | 50-60 Hz | 2330 W | 10A Benefits: ✅ Very fast cycle - Up to 4200 packs per hour. ✅ Flexibility - Possibility of packing single packs or multipacks at any length. ✅Easy operation with touchscreen control systemm - Sealtime, seal temperature and belt speed can easily be adjusted. ✅ Automated sealing - Continuous cycle sealing. Hnjdpfx Asw Euzmjndju ✅ Motorized systems - Sealing bar and conveyors are controlled by an inverter and encoder. ✅ Wide film choice - The CS Matic 100 can handle polyolefin, polyethylene and pvc centrefolded film. ✅ User-friendly touchscreen - Easy navigation through the menu structure and safe control of all packaging parameters. ✅ Built-in safety features - An emergency stop button is standard equipped.

Condition: excellent (used), Year of construction: 2025, STASZAK KWE-100 Professional Electric Smoking & Cooking Chamber / Smokehouse – 100–130 kg – 2025 For sale: STASZAK KWE-100 professional electric smoking and cooking chamber with integrated wood-chip smoke generator, manufactured in 2025. Lightly used and in excellent working condition. Suitable for processing meat, sausages, poultry, fish, cheese and other food products. The integrated smoke generator uses natural wood chips, allowing different wood varieties to be used depending on the required smoking process and flavour. Original purchase price: £22,000. ### Manufacturer & Support Hnedpfjz It Hhex Andeu Manufactured by PPHU STASZAK, an established Polish manufacturer of professional smoking and thermal-processing equipment with over 25 years of industry experience. The manufacturer remains in operation, with technical support, servicing and spare parts available. ### Capacity & Functions Production capacity: approx. 100–130 kg per batch / 1 smoking trolley, depending on the product and loading arrangement. Supplied with 2 stainless-steel smoking trolleys – one operating trolley and one spare/loading trolley, allowing the next batch to be prepared during operation. Processes include: - Hot and cold smoking - Cooking - Roasting and baking up to 160°C - Drying - Cooling - Automatic chamber washing/cleaning ### Technical Data Model: KWE-100 Year: 2025 Dimensions (L × W × H): 1300 × 1300 × 2300 mm Electric motor: 3.0 kW Chamber heating: 28 kW Smoke generator heater: 0.9 kW Total power consumption: 31.9 kW Power supply: 400 V, 3-phase Weight: approx. 1,000 kg Includes extractor fan, chimney, 2 stainless-steel trolleys and a selection of spare parts. Control menu available in Polish, English and Russian. ### Documentation & Demonstration Supplied with technical and operating documentation, including electrical wiring diagrams/schematics. The machine is currently installed, connected and fully operational and can be inspected and demonstrated before purchase. A live video demonstration via WhatsApp can be arranged. Additional photos, documentation and operating videos are available on request. ### Dismantling & Transport Dismantling and preparation for collection are included in the sale price. Assistance with loading will also be provided where reasonably possible. Transport/delivery can be arranged at additional cost, depending on destination. Assistance with reassembly/installation may also be available by prior arrangement at additional cost. Alternatively, the buyer may arrange their own transport. For overseas buyers, we can cooperate with the buyer's chosen transport company and assist with collection. ### Price £10,900 ONO – No VAT applicable. Located in the United Kingdom. Please contact me for further information, photos, documentation, videos, live demonstration or inspection. Other equipment also available separately: AK-Ramon AS-30 Bowl Cutter (30 L) – very good condition. Vacuum Tumbler – approx. 100–120 kg capacity. Photos and further information available on request.