Used Baljer & Zembrod Ruw Obx Iv for sale (1,849)

Condition: used, Year of construction: 2009, operating hours: 20,831 h, functionality: fully functional, arm reach: 15,200 mm, load capacity: 2,000 kg, track width: 3,000 mm, Equipment: cabin, crane, Baljer&Zembrod RUW with OBX IV Crane Machine number: 1795 Dcedpfx Amsy Rygljgji Track gauge: 3.0 m Crane type: OBX IV Reach: 15.2 m Lifting capacity without grab: 2,000 kg / 15.0 m Grab: included Crane position: center Cab side: right For complete technical specifications, see the document "Technical Data" !! Sale on behalf of customer !!

Condition: good (used), Year of construction: 2003, operating hours: 36,000 h, functionality: fully functional, machine/vehicle number: 1658, arm reach: 13,000 mm, load capacity: 2,500 kg, track width: 3,000 mm, cutting diameter: 1,500 mm, Equipment: cabin, crane, Baljer&Zembrod OBX II/III Year of manufacture: 2003 Dcsdpfoxpvr Sox Amgji In daily operation Condition: Well maintained.

Condition: ready for operation (used), Year of construction: 2013, For sale is a Baljer Zembrod OBX V-24 with up to 200m of rail. Dedpjwxndnofx Amgjci

Year of construction: 1994, condition: good (used), Baljer Zembrod root reducer Dsdpfx Amon Skz Tsgoci with radio remote control

Condition: ready for operation (used), Year of construction: 2005, operating hours: 40,000 h, machine/vehicle number: 1708, arm reach: 15,550 mm, load capacity: 1,800 kg, track width: 3,000 mm, year of last overhaul: 2020, Equipment: cabin, crane, Well-maintained forestry truck with crane for sale on behalf of a customer: Year of manufacture: 2005 Crane: ESX I, new in 2020 Reach: 15.55 m All-wheel drive Saw: 1.30 m bar length, on the left side Dcsdpezh Uk Rjfx Amgsi Track width (m): 3.0 Grapple: included Crane arrangement: in front of the cab Cab side: left

Condition: used, Year of construction: 2003, operating hours: 36,000 h, functionality: fully functional, machine/vehicle number: 1658, arm reach: 15,200 mm, load capacity: 2,500 kg, track width: 3,000 mm, Equipment: cabin, crane, Year of manufacture: 2003 Machine number: 1658 Track width (m): 3.0 Crane type: OBX II Reach: 15.2 m Lifting capacity without grab: 1,900 kg / 15.2 m Grab: included Crane position: in front of the cabin Cabin side: left Saw: 1.3 m Alpha Dcedpfxjyglfds Amgei !! Sale on behalf of customer !!

Year of construction: 1998, condition: ready for operation (used), A complete sawmill including all peripheral equipment and conveyor units is available. 1) Log yard: Baljer & Zembrod Asterix sorting carriage, year of manufacture: 1998, operating hours: 16382h, rail system type: double-T-beam, rail system length: 66m, cross conveyor dimensions X/Y: 7300mm/3300mm, log train length: approx. 40m. Including cut-off table with scraper conveyor. The running rails of the rail system were renewed approx. 5 years ago. 2) Sawmill: 2.1) Linck U71 frame saw in reinforced design with larger main bearing and a general overhaul carried out in 1995. 2.2) Linck VAK carriage. Linck Vy auxiliary carriage in heavier-duty design. 2.3) Möhringer butt log reducer. 2.4) Linck splitter wedge. 2.5) 2x Diemer edging saw units, passage width: 500mm. 2.6) Dankert band saw, wheel diameter: 1200mm. 2.7) Hydraulic log carriages with 3 clamping supports, cutting length range: approx. 1800mm-5000mm. 2.8) Various roller conveyors. 2.9) Various cross conveyors, vibration troughs, etc. 3) Saw service room: 3.1) Albert sharpening machine with flank grinding for band saws. 3.2) Oppliger straightening machine for band saws. 3.3) Rolling bench for band saws. 3.4) Vollmer CNE sharpening machine for circular saws. 3.5) Meinert manual setting machine for circular saws. 4) 2x Hildebrand Brunner drying chambers, volume: approx. 30m³-60m³. 5) Schmid wood chip heating system, year of manufacture: 1995, heating output: 450kW. 6) Manitou rough-terrain forklift. 7) Lewecke vacuum lifting machine. This is a complete sawmill. Documentation available. An on-site inspection is possible. Dodpfszf Nbxox Amgeci

Condition: new, Year of construction: 2026, functionality: fully functional, feed rate Y-axis: 45 m/min, working width: 1,100 mm, number of blades: 5, power of feed motor: 22 W, Debarker ZE 1105 Vario For round timber up to 110 cm! In the short wood variant from 1.80 meters log length! Perfect debarking result thanks to pressure adjustment of the knives during operation. All functions are performed hydraulically. Djdpfoyyv Dfex Amgeci Many adjustment options during operation, e.g. via radio remote control. Opening of knives in case of malfunctions at the push of a button. As a full-service supplier for log yards, we can offer you an individual and non-binding quotation for complete log yard solutions.

Condition: used, Year of construction: 2003, operating hours: 39,500 h, functionality: fully functional, machine/vehicle number: 1663, arm reach: 15,300 mm, load capacity: 2,000 kg, track width: 10,000 mm, Used gantry crane 10 meter track gauge Crane type: OBX IV 15.3 meters Djdpfoyyldzex Amgsci Lifting capacity: 2,000 kg at 15 meters without grab Grab: included Crane arrangement: central Cab side: left Power supply: conductor rail Power: 45 kW !! Sale on behalf of customer !! Available from summer 2026

Condition: used, Year of construction: 2005, operating hours: 27,000 h, functionality: fully functional, working width: 900 mm, number of blades: 5, power of feed motor: 22 W, ZE 905 in good condition. Sale by customer order! Max. pass-through 90 cm. Feed speed 32 m/min. Central lubrication. Regular service always performed. Runs very smoothly and can be inspected in operation. Machine is being replaced by a new one with Variopress system! Dodpfoy R Avvox Amgsci

Condition: used, Year of construction: 1984, operating hours: 69,889 h, functionality: fully functional, machine/vehicle number: 620, arm reach: 13,000 mm, load capacity: 1,250 kg, track width: 3,000 mm, Equipment: crane, For sale on behalf of a customer: an RSTW, year of manufacture 1984. It is equipped with a Jonsered crane with a reach of 13 meters. The machine is in good working condition and can be inspected. Dsdsy Ry Rqopfx Amgeci

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Equipment: cabin, crane, For sale: Baljer&Zembrod timber handling trolley. Year of manufacture: 2000 Crane type: OBX II Maximum reach: 13.2 m Lifting capacity at maximum reach: 2,200 kg without grapple Air-conditioned operator cabin Power cable wound on reel Dodpfx Amjxb A Evsgjci Track length: approx. 80 m

Condition: used, Year of construction: 1993, operating hours: 47,000 h, functionality: fully functional, arm reach: 13,000 mm, load capacity: 2,500 kg, track width: 3,000 mm, Equipment: cabin, crane, We offer this used Baljer & Zembrod machine for log yards, year of manufacture 1993. Track width: 3m Crane type: OBX II Lifting capacity without grapple: 1900kg/15.2m Dodpfx Amoyz Twrjgoci Grapple: without Crane position: Rear of cab Cab side: Left Saw: 1.3m Alpha With HEB500 running rail Cutting bench with waste scraper chain If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2007, Fast root de-sharpening in cross-feed mode Dcodeyyk D Topfx Amgji 75 kW milling shaft Including hydraulics

Condition: used, Equipment: crane, Baljer & Zembrod, ASX I, slewing ring from Baljer & Zembrod renewed, price 13,000 EUR ex works. Dodpoxb Upmjfx Amgoci

Condition: used, Year of construction: 1992, operating hours: 5,093 h, functionality: fully functional, load capacity: 4,000 kg, Equipment: crane, Baljer & Zembrod Sorting Line – 75 m, Operational, Available at Short Notice For sale is a used sorting line from the manufacturer Baljer & Zembrod, model AS/30V-L.D. The system comes from active operation and was decommissioned as part of a planned site relocation. The sorting line is fully functional but shows typical signs of wear consistent with its age. Note: The system was previously reserved and is now available again. Technical Data Model: AS/30V-L.D Year of manufacture: 1992 Operating hours: approx. 5,093 Condition: used, operational Defect: Saw blade is defective Length of crane runway: approx. 75 m Crane runway width: 3 meters Load capacity: 4 tons (see load capacity diagram in the photos) Length of round timber staging: approx. 23.5 m Description The machine is suitable for sorting round timber and was in use until recently. The sorting line has been regularly serviced but, due to its age, is in average visual condition. Hydraulics and electrics function reliably. The saw blade is defective and should be replaced or repaired. Fields of Application Dcodpfx Amsyu U Rlegsi Round timber sorting Sawmills Timber processing Biomass and round timber logistics Availability The machine is dismantled and stored outdoors and can be inspected by appointment. Immediate takeover is possible. Inspection under operating conditions (powered up) is possible until early week 14. Afterwards, the location will be disconnected from the power supply due to new building construction. Further technical details, photos, or a site visit can be provided on request.

Condition: excellent (used), Baljer & Zembrod roundwood handling, sorting, transport and sawing vehicle - German production - measuring the length of the wood - automatic cutting cycle TECHNICAL PARAMETERS: - max log diameter 1000 mm - crane reach max 9200 mm - crane working angle 225" - rotating head 360 " - lifting capacity: 2000mm - 2560kg 7240mm - 1680kg 9200mm - 1330kg - dimension of the hauler 6000x2150 mm - hauler with two-sided hydraulic discharge - pump motor power 11 kW - feed motor power 8.6 kW Dcedolimriepfx Amgji - feed speed 90 m/min HOLTEC FS 121 SAW - log length measurement - working length 1000 mm - hydraulic stroke of the guide - manual and automatic operating mode - log lifting - integrated sawdust extraction 2.2 kW - drum for winding the cord Transport dimensions 12.5x2.4x2.4m weight 12000 kg

Condition: excellent (used), For sale: precision measuring instrument UNIVERSAL CONCENTRICITY GAGE, manufactured in the USA, designed for measuring concentricity, runout, straightness, and inspection of rotating components. The set comes complete with a Blankenhorn 0.01 mm or Käfer 0.01 mm dial gauge (Made in Germany). Features a stable base, precise guides, and a holder with micrometric adjustment. The technical condition is very good – the equipment is fully operational, sourced from a German quality control department. Technical data: • Manufacturer: Universal Gage Co., USA • Model: Universal Concentricity Gage • Accuracy: 0.01 mm • Measuring range: approx. 0–100 mm • Gauge: Blankenhorn / Käfer – Made in Germany • Condition: used, functional, very good Dsdpfsxtwxusx Amgsci

Condition: good (used), Lechner IV B Hydraulic Bookbinding Press The machine is ready to operate. The press has a built-in hydraulic unit. Dcedpozgdc Hjfx Amgoi Four stations. Irreplaceable in bookbinding for the production of books, pads, etc.

Condition: excellent (used), Electrical installation tester from the renowned German manufacturer Gossen Metrawatt The PROFITEST MXTRA model is designed for professional measurement of electrical installations and safety inspections. The device is used by electricians, service technicians, and for routine installation inspections. ⸻ TECHNICAL SPECIFICATIONS Manufacturer: Gossen Metrawatt Model: PROFITEST MXTRA Supply voltage: 230 V Measurement category: CAT III 600V, CAT IV 300V Professional electrical installation tester ⸻ INCLUDED IN THE SET PROFITEST MXTRA tester measurement cable adapter carrying bag The exact set is shown in the photos ⸻ APPLICATIONS electrical installation measurement safety testing installation inspections electrical service ⸻ Dsdpfx Amsywcr Dsgsci CONDITION used visually in good condition

Condition: good (used), Simplacutter model IV 110×160 Cauhe die cutter The machine is fully operational, like new. Made in Spain. Frame size: 1100×1600 mm Sheet size: 1160×1680 mm Weight: 8500 kg Power supply: 380 V Installed power: 7.5 kW Impact force: 350 t Dsdpfx Amsy Tu Rwsgeci Equipment: – pneumatic clutch and brake – control panel – two frames – 2 operating modes: time-delayed, manual – central lubrication – additional safety guards – safety pressure mats – operating tools – hard sheet metal

Condition: excellent (used), Year of construction: 2010, 412mm max. machining diameter, maximun turning length 753mm, Dodpfxswxw A He Amgoci 225 degree movement on B axis, 15HP spindle motor power, 6,000rpm spindle speed, 6,000 rpm sub spindle speed, 52mm bar capacity, milling speed 12,000rpm C axis & Milling, 9 station lower turret. Swarf conveyor, tool setter, Coolant, Interlocked guards, Swivelling Universal Head., C Axis (0.001deg), Mazatrol Matrix control

Condition: used, Magnetic drill, hand drill -Magnetic base: Magnetor type PS 32 L -Drilling machine: AEG type HBE-IV - Recording: MK2 -Max. Drill: Ø 23 mm -Connection: 265V/200Hz -Dimensions: 700/300/H670 mm Dcsdpfefc R D Ajx Amgsi -Weight: 49 kg

Condition: used, Mechatronic drive system, gearbox, spur gear, angle gear, worm gear, Movigear -Manufacturer: SEW-Eurodrive, Gearbox Movigear Type MGFAT2-DSM-DSC-B/IV/WA/PE/A i 55,25 Dcjdsrqipgjpfx Amgsi -Speed: 3.6 to 36.2 rpm -Hollow shaft: Ø 30 x 90 mm -Individual components: see photos -Number: 3x gearbox available -Price per piece -Dimensions: 230/170/H365mm -Weight: 16 kg/piece

Condition: good (used), Turning tool holder, steel holder, turning tool, turning tool holder, tool holder, axial tool holder, change holder, turning tool holder, clamp holder, turning tool holder -Tool holder: steel holder -Type: B IV hexagon 28 mm -Dimensions: see photos / technical drawing -Number: 2x holders available Dsdpfxeww Elmj Amgeci -Price: per piece -Dimensions: 210/42/H45 mm -Weight: 2.0 kg/pc.