Log yard machinery

Baljer & Zembrod

Condition: used, Year of construction: 2005, operating hours: 27,000 h, functionality: fully functional, working width: 900 mm, number of blades: 5, power of feed motor: 22 W, ZE 905 in good condition. Sale by customer order! Max. pass-through 90 cm. Feed speed 32 m/min. Central lubrication. Regular service always performed. Runs very smoothly and can be inspected in operation. Machine is being replaced by a new one with Variopress system! Redpfx Apoy R Avvsrocb

Condition: ready for operation (used), Slab recovery line with below machines: Rcjdsgwqk Sjpfx Aprsb One 2-blade board edger One single blade horisontal resaw Conveyors system between the machines included.

Condition: used, Year of construction: 1984, operating hours: 69,889 h, functionality: fully functional, machine/vehicle number: 620, arm reach: 13,000 mm, load capacity: 1,250 kg, track width: 3,000 mm, Equipment: crane, For sale on behalf of a customer: an RSTW, year of manufacture 1984. It is equipped with a Jonsered crane with a reach of 13 meters. The machine is in good working condition and can be inspected. Rcjdpfey Ry Rqsx Aprjb

Condition: used, Year of construction: 2017, operating hours: 20,831 h, functionality: fully functional, arm reach: 15,200 mm, load capacity: 2,000 kg, track width: 3,000 mm, Equipment: cabin, crane, Baljer&Zembrod RUW with OBX IV Crane Machine number: 1795 Track gauge: 3.0 m Crane type: OBX IV Reach: 15.2 m Lifting capacity without grab: 2,000 kg / 15.0 m Grab: included Crane position: center Cab side: right Rcodpfxey Rygle Apreb For complete technical specifications, see the document "Technical Data" !! Sale on behalf of customer !!

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Log feeder, chain log infeed, and chain log conveyor – 20 m Rodpfxowlaxks Aprecb Minimum log length: 5 m Maximum log length: 14 m Holtec ES 120 – Cross-cut saw (Year of manufacture: 1995) For cutting and trimming wood in industrial applications Chain log conveyor – 4 m Cassel Metal Shark® Octa – Metal detector Outfeed roller conveyor + transfer table – 7 m Control cabin Hydraulic operation Condition: perfect Manufacturer: Holtec Type: ES120 Year of manufacture: 1995

Condition: ready for operation (used), Year of construction: 2013, For sale is a Baljer Zembrod OBX V-24 with up to 200m of rail. Rcjdpfx Aswxndnspreb

Condition: new, Year of construction: 2026, functionality: fully functional, feed rate Y-axis: 45 m/min, working width: 1,100 mm, number of blades: 5, power of feed motor: 22 W, Debarker ZE 1105 Vario For round timber up to 110 cm! In the short wood variant from 1.80 meters log length! Perfect debarking result thanks to pressure adjustment of the knives during operation. All functions are performed hydraulically. Rcedpfeyyv Dfex Aprjb Many adjustment options during operation, e.g. via radio remote control. Opening of knives in case of malfunctions at the push of a button. As a full-service supplier for log yards, we can offer you an individual and non-binding quotation for complete log yard solutions.

Condition: good (used), Year of construction: 2000, functionality: fully functional, Cambio 500 debarking line consisting of: Infeed centering. Cambio 500: Rotor opening 495 mm. Minimum log diameter 90 mm. Rsdpfxewxdime Aprocb Drive motor 55 kW. Feed motor 11 kW. 80 m/min. Hydraulic rotor and feed rollers. Outfeed control unit. Tilting trough for long timber. Spare parts.

Condition: used, Year of construction: 2003, operating hours: 39,500 h, functionality: fully functional, machine/vehicle number: 1663, arm reach: 15,300 mm, load capacity: 2,000 kg, track width: 10,000 mm, Used gantry crane 10 meter track gauge Crane type: OBX IV 15.3 meters Lifting capacity: 2,000 kg at 15 meters without grab Grab: included Crane arrangement: central Rcjdpfeyyldzjx Apreb Cab side: left Power supply: conductor rail Power: 45 kW !! Sale on behalf of customer !! Available from summer 2026

Condition: good (used), Year of construction: 2007, Fast root de-sharpening in cross-feed mode 75 kW milling shaft Rodpfx Aoyyk D Tsprocb Including hydraulics

Condition: like new (used), Through feed double end trimmer saws. Redpfoif N Sxox Aprocb 2x 3kW saw motors. Feed motor with variator. 300mm to 3100mm end trimming capacity. Suitable for use with a moulder infeed or similar.

Condition: used, Year of construction: 1992, operating hours: 5,093 h, functionality: fully functional, load capacity: 4,000 kg, Equipment: crane, Baljer & Zembrod Sorting Line – 75 m, Operational, Available at Short Notice For sale is a used sorting line from the manufacturer Baljer & Zembrod, model AS/30V-L.D. The system comes from active operation and was decommissioned as part of a planned site relocation. The sorting line is fully functional but shows typical signs of wear consistent with its age. Note: The system was previously reserved and is now available again. Technical Data Model: AS/30V-L.D Year of manufacture: 1992 Operating hours: approx. 5,093 Condition: used, operational Defect: Saw blade is defective Length of crane runway: approx. 75 m Crane runway width: 3 meters Load capacity: 4 tons (see load capacity diagram in the photos) Length of round timber staging: approx. 23.5 m Description The machine is suitable for sorting round timber and was in use until recently. The sorting line has been regularly serviced but, due to its age, is in average visual condition. Hydraulics and electrics function reliably. The saw blade is defective and should be replaced or repaired. Fields of Application Round timber sorting Sawmills Timber processing Redpfx Aoyu U Rleprjcb Biomass and round timber logistics Availability The machine is dismantled and stored outdoors and can be inspected by appointment. Immediate takeover is possible. Inspection under operating conditions (powered up) is possible until early week 14. Afterwards, the location will be disconnected from the power supply due to new building construction. Further technical details, photos, or a site visit can be provided on request.

Condition: excellent (used), Baljer & Zembrod roundwood handling, sorting, transport and sawing vehicle - German production - measuring the length of the wood - automatic cutting cycle Rcsdpfx Apolimrisreb TECHNICAL PARAMETERS: - max log diameter 1000 mm - crane reach max 9200 mm - crane working angle 225" - rotating head 360 " - lifting capacity: 2000mm - 2560kg 7240mm - 1680kg 9200mm - 1330kg - dimension of the hauler 6000x2150 mm - hauler with two-sided hydraulic discharge - pump motor power 11 kW - feed motor power 8.6 kW - feed speed 90 m/min HOLTEC FS 121 SAW - log length measurement - working length 1000 mm - hydraulic stroke of the guide - manual and automatic operating mode - log lifting - integrated sawdust extraction 2.2 kW - drum for winding the cord Transport dimensions 12.5x2.4x2.4m weight 12000 kg

Condition: used, Year of construction: 2000, functionality: fully functional, Trimming line consisting of: centering table H42 (factory-overhauled EWD 2000), chipper canter FZ 3 (factory-overhauled EWD 2000), converted to servo cylinder; infeed BNK with square timber centering, BNK 200/6, year of manufacture 2000; board separator ASV, year of manufacture 2000; hydraulic unit; central lubrication. Without electrical control equipment. Dismantled, chipper canter and BNK stored in the hall. Rcodpfx Apex Tpzdsrsb

Year of construction: 1994, condition: good (used), Baljer Zembrod root reducer with radio remote control Rodsn Skz Tspfx Aprscb