Used Berco Acz-71 for sale (2,833)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 755/B, type of input current: three-phase, total width: 1,020 mm, total length: 1,450 mm, total height: 2,050 mm, input current: 5 A, AC 710 industrial cylinder boring and surfacing machine Production era: 1970s–1980s industrial design This is a high-precision engine block cylinder boring and surfacing machine, developed primarily for the reconditioning and oversize boring of internal combustion engine cylinders. The machine belongs to Berco's classic industrial series of engine rebuilding equipment, featuring a massive cast-iron frame and a high-rigidity spindle system. The equipment is suitable for the precise boring of engine blocks, cylinder liners, and industrial cylinders. The stable T-slotted table and long stroke length allow for the machining of large engine blocks. The machine features a mechanical, multi-speed spindle drive and a precision feed system, ensuring uniform bore quality. Key technical specifications: Lodpfoz Rw N Hsx Ah Ssru • Minimum boring diameter: approx. 31 mm • Maximum boring diameter: approx. 180 mm • Spindle speed range: approx. 155 – 873 rpm (multi-stage) • Feed rates: approx. 0.04 – 0.076 – 0.128 mm/rev • Main motor power: approx. 1 HP • Table longitudinal travel: approx. 1000 mm • Table cross travel: approx. 100 mm • Effective table size: approx. 1100 × 400 mm • Head vertical travel: approx. 700 mm • Maximum boring depth: approx. 480 mm • Maximum working height on the table: approx. 820 mm • Distance from spindle centerline to column: approx. 305 mm • Machine weight: approx. 1500 kg • Stable cast-iron machine frame and precision guideways The machine has been thoroughly cleaned, checked and adjusted;ready to work.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 8018, type of input current: three-phase, total width: 1,100 mm, total length: 1,460 mm, total height: 2,050 mm, input current: 8 A, AC 400 industrial cylinder boring and surfacing machine Production era: 1970s–1980s industrial design It is a high-precision engine block cylinder boring and surfacing machine, developed primarily for the reconditioning and oversize boring of internal combustion engine cylinders. The machine belongs to Berco's classic industrial series of engine rebuilding equipment, featuring a massive cast-iron frame and a high-rigidity spindle system. The equipment is suitable for the precise boring of engine blocks, cylinder liners, and industrial cylinders. The stable T-slotted table and long stroke length allow for the machining of large engine blocks. The machine features a mechanical, multi-speed spindle drive and a precision feed system, ensuring uniform bore quality. Ledpfez Rwkqjx Ah Soru Key technical specifications: • Minimum boring diameter: approx. 31 mm • Maximum boring diameter: approx. 180 mm • Spindle speed range: approx. 155 – 873 rpm (multi-stage) • Feed rates: approx. 0.04 – 0.076 – 0.128 mm/rev • Main motor power: approx. 1 HP • Table longitudinal travel: approx. 1000 mm • Table cross travel: approx. 100 mm • Effective table size: approx. 1100 × 400 mm • Head vertical travel: approx. 700 mm • Maximum boring depth: approx. 480 mm • Maximum working height on the table: approx. 820 mm • Distance from spindle centerline to column: approx. 305 mm • Machine weight: approx. 1500 kg • Stable cast-iron machine frame and precision guideways This is a good working machine. If you would like, you can try it at our workshop.

Condition: ready for operation (used), functionality: fully functional, overall weight: 1,500 kg, total length: 3,000 mm, total width: 1,500 mm, total height: 2,300 mm, No minimum price – guaranteed sale to the highest bidder! Lrsdsz Ilz Ropfx Ah Sou Submitting a bid obligates you to collect the item on time between November 16, 2026, and November 26, 2026! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,500 x 2,300 mm Machine weight: 1,500 kg External reference: Lebtig - Lot 83

Condition: ready for operation (used), Year of construction: 2013, operating hours: 2,780 h, functionality: fully functional, workpiece weight (max.): 150 kg, grinding wheel diameter: 660 mm, center height: 270 mm, center width: 1,700 mm, grinding diameter: 300 mm, spindle speed (max.): 1,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Workpiece Grinding diameter in rotary grinding, max.: 220 mm Grinding diameter in cylinder grinding, max.: 300 mm Rotary diameter over table, max.: 300 mm Passage in the steady rest, min. / max.: 20 / 90 mm Workpiece weight between centers, max.: 150 kg Center height above table: 270 mm Lredpfxezarx De Ah Ssu Distance between centers: 1,700 mm Grinding length with fixed tailstock: 1,500 mm Grinding length with special equipment: 1,300 mm Diameter of the chuck: 180 mm Tailstock quill travel: 50 mm Grinding wheel Grinding wheel diameter, max.: 660 mm Grinding wheel width, min. / max.: 20 / 80 mm Peripheral speed, max.: 35 / 63 m/s Grinding wheel for concave cam profiles Diameter with electro spindle, min.: 100 mm Grinding wheel width, min. / max.: 20 / 50 mm Peripheral speed, max.: 35 / 50 m/s Grinding spindle head X-axis Travel: 490 mm Measuring resolution: 0.0001 mm Workpiece head C-axis Speed range of workpiece spindle: 1 - 1,000 rpm Speed range of contour grinding spindle: 1 - 400 rpm Torque on the spindle: 80 Nm Resolution: 0.0001 ° Table Z-axis Measuring resolution: 0.0001 mm MACHINE DETAILS Drive power of the motors Grinding spindle motor: 7.5 / 15 kW Workpiece motor, C-axis: 12 W Dimensions & Weight Dimensions (L x W x H): 5,500 x 2,600 x 2,000 mm Total weight: 9,850 kg EQUIPMENT Automatic balancing device, programmable Grinding spindle head X-axis with linear motor Optical scale on the X-axis Workpiece head C-axis with encoder Table Z-axis with linear motor Optical scale on the Z-axis Workpiece motor, direct drive type, C-axis Grinding spindle motor, direct drive type Fixed tailstock Tailstock quill Note: The machine can be powered up for inspection for an additional cost of approximately €12,000.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Ljdpfxjz Il Anj Ah Seru Submitting a bid obligates you to collect the item within the specified timeframe, between November 16, 2026, and November 26, 2026! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,500 x 2,300 mm Machine weight: 1,500 kg External reference: Lebtig - Lot 84

Condition: excellent (used), Year of construction: 2010, operating hours: 70,257 h, functionality: fully functional, overall weight: 645 kg, input voltage: 415 V, We have for sale a 2010 FANUC M-710 iC 50s robot with a 30iA controller in very good condition. please see the photos for run times. just been greased and tested Lsdezxrqcspfx Ah Ssru

Condition: used, functionality: fully functional, Complete stationary sawmill including: Log infeed, transverse conveyor Log lifting device with ejector Transverse conveyor and feeder to the clamping carriage Clamping carriage, hydraulically operated, with auxiliary carriage, electrically operated; the entire sawing line can be controlled from the clamping carriage. FULL SAW FRAME BRAUN CHGB 71/75 with automatic overhang adjustment and stepless feed Saw blade tensioner Jansen, hydraulically operated Electrically adjustable wedge with electric extraction rollers Roller conveyor with pusher Spiral roller conveyor for boards to the edging line Transverse conveyor in front of the edger Undertable cutoff saw DOUBLE EDGER PAUL KMEZ with trim removal system Roller conveyor after the edger with discharge to the left/right Saw blade sharpening machine for saw frames, Vollmer Saw blade setting machine for saw frames, Riva Circular saw sharpening machine, Vollmer Sawdust and trim disposal, shaking chute, vibrating screen with 1 fraction 2 conveyor belts for feeding into the silo Lodpfx Ahsz I Tabs Soru

Condition: excellent (used), functionality: fully functional, Well-maintained W&D gate-type press, model GXW 71 VH. Lrjdpfx Ahjzz Iu Aj Sju Frame width 710 x 710 mm. Stroke 500 mm. Infinitely variable hydraulic feed. Hydraulic cylinder lift with adjustable cylinder pressure. Drive. Saw attachment. Electric remote control. Clamping carriage and wedge with electric adjustment. From a small operation. Also interesting as a source of spare parts.

Condition: ready for operation (used), functionality: fully functional, empty load weight: 3,720 kg, overall weight: 11,200 kg, axle configuration: 2 axles, permissible axle load (axle 1): 5,600 kg, permissible axle load (axle 2): 5,600 kg, first registration: 11/2005, next inspection (TÜV): 12/2026, total length: 9,350 mm, total width: 2,550 mm, total height: 3,350 mm, suspension: air, tire size: 285/70 R19.5, tire condition: 70 %, maximum speed: 90 km/h, color: yellow, trailer brake: trailer braked, Year of construction: 2005, Equipment: ABS, center pivot plate, Saxas trailer, year of manufacture 11/2005, for sale. Valid TÜV (technical inspection) until 12/2026. Ready for immediate use; minor repair required on the lower right door hinge. Ledpfx Ahs Advzyo Soru

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 9A5822, type of input current: three-phase, input voltage: 400 V, input current: 60 A, total height: 1,800 mm, cutting width (max.): 1,720 mm, cutting height (max.): 50 mm, compressed air connection: 6 bar, For sale is a Lectra Vectorfashion VT-FA-MH-71 automated CNC textile cutting system, offered as a complete industrial production line. This system is designed for high-volume, high-precision fabric cutting in garment manufacturing. It enables automated multi-layer cutting with consistent accuracy and significantly improves production efficiency compared to manual cutting processes. The machine has been operated as part of a dedicated and independent cutting line together with a GERBER SY 101 spreading system (unit 21 C) and a Gerber automatic fabric loader (unit 31 C). This configuration enables a fully synchronized workflow from roll loading to spreading and cutting, maximizing throughput and minimizing manual intervention. The system includes a long-format vacuum cutting table, gantry-mounted cutting head, and integrated extraction system. A computer-controlled interface ensures precise execution of cutting patterns and production workflows. The unit has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video recorded in operation on 05.03.2026. Includes • Lectra Vector CNC cutting system • Gantry-mounted cutting head • Conveyorized cutting surface • Industrial vacuum system (approx. 30 kW class) • Dust extraction system • Computer workstation and control interface Technical Details • Manufacturer: Lectra, France • Model: VT-FA-MH-71 • Serial number: 9A5822 • Year: 2009 • Type: Automated CNC textile cutting system • Control: Computer-controlled (Lectra software environment) • Cutting method: Oscillating knife, multi-layer capable • System: Vacuum hold-down with extraction Electrical & Utility Requirements • Control cabinet: approx. 230 V, single phase • Vacuum system: approx. 400 V, 3-phase, up to 30 kW • Peak current (startup): up to approx. 60 A • Compressed air: 5–7 bar, dry and filtered • Air consumption: required for tool operation and cooling Cutting Performance • Multi-layer cutting capability (approx. 25–70 mm compressed lay height depending on material) • High acceleration and cutting speed for reduced cycle time • Repeatable precision across full table width • Continuous feeding capability for long production runs System Architecture • Gantry-driven X/Y cutting head for high-speed positioning • Vacuum table with bristle block surface for material stabilization • Conveyorized system enabling continuous material feed • Integrated extraction system for dust and fiber removal Production Advantages • Significant material savings through optimized nesting and precise cutting • Reduced labor costs compared to manual cutting processes • High throughput suitable for industrial-scale production Service & Condition Notes • Recently serviced on 27.02.2026 • Video available from operation (05.03.2026) • Machine was operational prior to factory shutdown • Typical wear consistent with industrial use • Software compatibility should be verified if upgrading control workstation Condition Used industrial condition Operational prior to shutdown Sold as-is, where-is, without warranty Typical Applications • Garment production cutting rooms • Workwear and denim production • Technical textile cutting • Upholstery and automotive textiles Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling required due to system size and complexity Lrjdpfx Ahoy Avg Eo Ssu

Condition: good (used), Year of construction: 1996, I - beam section - flat steel 120 x 20 (d 750) mm I-beam section - upend 60 x 10 (d800) mm L-beam 50 x 5 (d 1200) mm bar material - diameter 35.0 (d 800) mm bar material dia. max. 70 x 3.0 (1200) mm 50.0 mm diameter of upper rolls 155 mm diameter of lower rolls 155 mm Stroke length 150 mm Rotating speeds 9.0 U/min Lrjdpez S U T Esfx Ah Ssu total power requirement 1.3 kW weight 305 kg range L-W-H 900 x 700 x 1500 mm Features: - Robust electric-motor-driven ring/profile bending machine - Machine base frame with rear storage shelf - Capable of horizontal and vertical operation - Equipped with a wide variety of roller sets * Split roller segments * Pipe rollers - Manual feed of the upper roller - Analog position indicator for the upper rollers (scale) - Manually adjustable side/aligning rollers - Base frame with forklift pockets * For easy transport

Year of construction: 2022, condition: used, A new, unused EVG Lufttechnik high-temperature centrifugal fan is offered. Volume flow: 245m³/h, max. speed: 5270rpm, max. medium temperature: 500°C, total pressure difference: up to 6172Pa, motor power: 1.5kW, voltage: 230/400V, efficiency class: IE3, degree of protection: IP55, weight: approx. 165kg. With Motovario electric motor and V-belt drive. Documentation fully available. Lodpsz Dki Eofx Ah Ssru

Condition: new, Year of construction: 2025, functionality: fully functional, Kwik-Way SVS2 Deluxe Valve grinder machine - new condition With rocker arm grinder. Technical details: Ljdpfx Asnacu Doh Sjru Precision 6-ball chuck Accuracy: 0,005 mm Minimum valve stem diameter: 4 mm Maximum valve stem diameter: 14 mm Minimum valve stem length (approx): 85,73 mm Maximum valve head diameter: 100 mm Valve grinding wheel diameter: 178 mm Surface wheel diameter: 76 mm Spindle drive motor (H.P.): 0,37 kW Chuck drive motor (H.P.): 0,06 kW Coolant capacity: 3,8 ltr Chuck R.P.M. (approx.): 100 - 300 Grinding angles: 13° - 62° Main dimensions: W x L x H: 940 x 559 x 406 mm Weight: 141 kg If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 710 x 450 x 510mm, Table size 760mm x 430mm, table load 500 kgs, spindle speed 8000rpm, spindle motor power 20Hp, Ledpfxjz R Rbds Ah Ssru Siemens 828D Control with Shopmill, rapid feed XYZ axis 20m/min, Spindle taper BT40, 24 station ATC.

Condition: excellent (used), Year of construction: 2019, Fan Systems WITT A-RNZ9/560/710/2 Centrifugal fan 2019, unused, mounted on frame with 45KW motor, see plates for full spec Lrjdpjz E Nqqsfx Ah Seu

Condition: excellent (used), functionality: fully functional, cutting height (max.): 130 mm, total length: 2,000 mm, total height: 130 mm, cutting width (max.): 230 mm, total width: 230 mm, overall weight: 3,000 kg, SCM Superset 23 – Four-Sided Planer – 5 Heads – 230 × 130 mm – FOUR-SIDED PLANING MACHINE! Professional SCM Superset 23 four-sided planer, renowned Italian manufacture. The machine is equipped with 5 spindles, stepless feed rate adjustment via a frequency inverter, and electric thickness setting. A robust feed system and pneumatic roller pressure ensure stable and precise guidance of the workpiece. The planer is used and in very good technical condition. The machine is suitable for professional wood processing in carpentry workshops, sawmills, and for the production of structural elements, moldings, boards, and timbers. KEY PARAMETERS: - maximum workpiece width: 230 mm - maximum workpiece height: 130 mm - number of spindles: 5 - spindle diameter: 40 mm - stepless feed rate adjustment via a frequency inverter - electric thickness setting - pneumatic roller pressure - central table lubrication - long infeed table: 1980 mm - machine enclosed in a cabinet SPINDLE ARRANGEMENT: Bottom horizontal spindle - working width: 230 mm - motor power: 4 kW Right vertical spindle - working height: 130 mm Left vertical spindle - working height: 130 mm - total power of the 2nd and 3rd spindles: 7.5 kW Top horizontal spindle - working width: 230 mm - motor power: 5.5 kW - electric up/down adjustment Bottom horizontal spindle - working width: 230 mm - motor power: approximately 5.5 kW All spindles have adjustment in the appropriate directions: up/down and left/right. FEED SYSTEM: Lsdpezzx Iysfx Ah Sjru - 6 top metal, toothed feed rollers - double top discharge roller – smooth, rubber - 2 bottom rubber pull rollers - 2 bottom side pressure rollers - pneumatic roller pressure - stepless feed rate adjustment via a frequency inverter - feed motor: 3 kW OTHER TECHNICAL DATA: - body lifting motor: 0.37 kW - length of the infeed table: 1980 mm - central table lubrication - dust extraction port diameters: 5 × 130 mm - machine dimensions: 3600 × 1800 × 1750 mm - weight: approximately 3000 kg - country of manufacture: Italy - condition: used, very good Gross price, VAT margin. The machine is available from JBS Maszyny Stolarskie. We invite you to contact us by phone. You can view and inspect the machine before purchasing. We also assist with organizing transportation. JBS WOODWORKING MACHINERY Sale of professional woodworking machines

Condition: used, Year of construction: 1986, Used Machine Year of manufacture: 1986 Features and technical specifications: - Cutting length: 2700 mm - Cutting width: 1050 mm - Cutting height: approx. 145 mm - Motor: 5.5 kW Ledpjzyy Dajfx Ah Seru - 2,800 - 4,000 - 5,500 rpm - Hydraulic lifting, lowering, and swiveling of the saw unit up to a maximum of 45.5° - With scoring unit - With parallel cutting device Weight: approx. 1,270 kg

Condition: ready for operation (used), Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: 714000-1, type of input current: three-phase, input voltage: 400 V, table length: 7,000 mm, table width: 2,000 mm, power: 36.77 kW (49.99 HP), Flow Waterjet 714000-1 Flying Bridge 7x2 meters Year of manufacture: 2010 60,000 PSI Ledpfoxwtu Tsx Ah Sjru 9,000 hours Complete and in good working condition Various wear parts such as pipes and extra nozzles Abrasive hopper Abrasive feeder Immediately available Waterjet cutter Flow Waterjet Flowcut Waterjet cutting OMAX CNC plasma Hypertherm Laser fiber laser bystronic Amada Trumpf Accurl Bodor HSG JQ Nukon

Condition: used, Year of construction: 2012, operating hours: 4,720 h, Equipment: all wheel drive, Int. No.: KX 71 On behalf of a customer Well-maintained Kubota KX 71-3 * Mini excavator * Kubota KX 71-3 * Year of manufacture: 2012 * Approximately 4,720 operating hours * Quick coupler * Hydraulic ditching blade * 2 deep-reach buckets Ljdpozr Awmjfx Ah Sjru Trade-ins are possible Financing available from 3.99% Errors and prior sale excepted! The information in this advertisement is a non-binding description and does not constitute guaranteed characteristics. The seller assumes no liability for typographical and data transmission errors. Listed equipment must be checked separately. All information in the advertisements is non-binding! Delivery throughout Germany upon request Opening hours: Monday to Thursday from 9:00 a.m. to 5:00 p.m. Friday from 9:00 a.m. to 2:00 p.m. and by appointment!!!

Condition: good (used), functionality: fully functional, Max. wheel diameter: 710 mm Gear width: 335 mm Table size: 630 mm Table bore: 120 mm Max. table load: 700 kg Max. module: 7 Min. module: 1 Ljdpfx Ajzbt Hrjh Seru Hob spindle speed range: 40-315 rpm Feed range: Axial: 0.40 - 5 mm/rev Radial: 0.20 - 2.5 mm/rev Tangential: 0,1-1,25 mm/rev

Condition: excellent (used), functionality: fully functional, Complete saw frame for Esterer Gatter HDE or SS 71. Lrodpfjxw Ubnsx Ah Seu

Condition: excellent (used), Year of construction: 1996, grinding width: 1,350 mm, power: 42 kW (57.10 HP), COSTA 71 CTT 1350 wide belt sanding machine, manufactured in 1996. Configuration: 1 hard rubber sanding roller. 1 pneumatic pad. Air blow-off system. Working width: 1,350 mm. Pneumatic (compressed air) cleaning system for all units. Vacuum worktable with integrated fan. Construction: Designed for use in a production line with a fixed working height; the sanding units move while the workpiece remains at a constant level. Ljdpeznvp Ijfx Ah Sjru 2 motors, total power: 42 kW.

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER S 71 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. Lredpfx Asywh Hmeh Sju

Condition: excellent (used), Year of construction: 1997, I sell the widebelt sanding machine COSTA 71 CTT 1350, year 1997. Configuration: 1pc. hard rubber cylinder 1pc electronic segmented pad 1pc electronic segmented pad Cleaning unit combined brush + air blow in the outfeed. Working width 1350mm Pressure shoes for short elements. Air-blow on all units. Vacuum underpressure table with integrated ventilator. Designed for the line, with fixed working height and moving aggregates. Lredpfx Ahoxlk Rbo Seu 3 motors total power 55kW Condition very good ! Available immediately.

Condition: ready for operation (used), Philips PE 1927/71 power supply, 4022 229 2000 1 D 003868 ACD 9415, used, in good condition, 100% functional, scope of delivery as shown in the photos. Ledoz Hicvopfx Ah Soru